1. 18 Aug, 2012 5 commits
  2. 16 Aug, 2012 1 commit
  3. 15 Aug, 2012 2 commits
  4. 10 Aug, 2012 15 commits
    • Michael Grzeschik's avatar
      usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop · b1b552a6
      Michael Grzeschik authored
      This patch fixes an issue introduced by patch:
      
          72c973dd usb: gadget: add usb_endpoint_descriptor to struct usb_ep
      
      Without this patch we see a kworker taking 100% CPU, after this sequence:
      
      - Connect gadget to a windows host
      - load g_ether
      - ifconfig up <ip>; ifconfig down; ifconfig up
      - ping <windows host>
      
      The "ifconfig down" results in calling eth_stop(), which will call
      usb_ep_disable() and, if the carrier is still ok, usb_ep_enable():
      
               usb_ep_disable(link->in_ep);
               usb_ep_disable(link->out_ep);
               if (netif_carrier_ok(net)) {
                       usb_ep_enable(link->in_ep);
                       usb_ep_enable(link->out_ep);
               }
      
      The ep should stay enabled, but will not, as ep_disable set the desc
      pointer to NULL, therefore the subsequent ep_enable will fail. This leads
      to permanent rescheduling of the eth_work() worker as usb_ep_queue()
      (called by the worker) will fail due to the unconfigured endpoint.
      
      We fix this issue by saving the ep descriptors and re-assign them before
      usb_ep_enable().
      
      Cc: Tatyana Brokhman <tlinder@codeaurora.org>
      Signed-off-by: default avatarMichael Grzeschik <m.grzeschik@pengutronix.de>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b1b552a6
    • Venu Byravarasu's avatar
      usb: host: tegra: fix warning messages in ehci_remove · ecc8a0cd
      Venu Byravarasu authored
      Existing implementation of tegra_ehci_remove() calls
      usb_put_hcd(hcd) first and then iounmap(hcd->regs).
      
      usb_put_hcd() implementation calls hcd_release()
      which frees up memory allocated for hcd.
      
      As iounmap is trying to unmap hcd->regs, after hcd
      getting freed up, warning messages were observed during
      unload of USB.
      
      Hence fixing it.
      Signed-off-by: default avatarVenu Byravarasu <vbyravarasu@nvidia.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ecc8a0cd
    • Steven J. Hill's avatar
      usb: host: mips: sead3: Update for EHCI register structure. · cc59c7a9
      Steven J. Hill authored
      One line fix after 'struct ehci_regs' definition was changed
      in commit a46af4eb (USB: EHCI: define
      extension registers like normal ones).
      Signed-off-by: default avatarSteven J. Hill <sjhill@mips.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cc59c7a9
    • Kuninori Morimoto's avatar
      usb: renesas_usbhs: fixup resume method for autonomy mode · 5b50d3b5
      Kuninori Morimoto authored
      If renesas_usbhs is probed as autonomy mode,
      phy reset should be called after power resumed,
      and manual cold-plug should be called with slight delay.
      Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5b50d3b5
    • Kuninori Morimoto's avatar
      usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume · e7ae64c7
      Kuninori Morimoto authored
      suspend/resume will failed on renesas_usbhs without this patch.
      Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e7ae64c7
    • Oliver Neukum's avatar
      update MAINTAINERS for Oliver Neukum · 61eee9a7
      Oliver Neukum authored
      my neukum.name address has run out
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      61eee9a7
    • Bjørn Mork's avatar
      usb: usb_wwan: resume/suspend can be called after port is gone · 032129cb
      Bjørn Mork authored
      We cannot unconditionally access any usb-serial port specific
      data from the interface driver.  Both supending and resuming
      may happen after the port has been removed and portdata is
      freed.
      
      Treat ports with no portdata as closed ports to avoid a NULL
      pointer dereference on resume.  No need to kill URBs for
      removed ports on suspend, avoiding the same NULL pointer
      reference there.
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      032129cb
    • Bjørn Mork's avatar
      usb: serial: prevent suspend/resume from racing against probe/remove · d5fd650c
      Bjørn Mork authored
      Some usb-serial drivers may access port data in their suspend/
      resume functions. Such drivers must always verify the validity
      of the data as both suspend and resume can be called both before
      usb_serial_device_probe and after usb_serial_device_remove.
      
      But the port data may be invalidated during port_probe and
      port_remove. This patch prevents the race against suspend and
      resume by disabling suspend while port_probe or port_remove is
      running.
      Suggested-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d5fd650c
    • Bjørn Mork's avatar
      usb: usb_wwan: replace release and disconnect with a port_remove hook · a1028f0a
      Bjørn Mork authored
      Doing port specific cleanup in the .port_remove hook is a
      lot simpler and safer than doing it in the USB driver
      .release or .disconnect methods. The removal of the port
      from the usb-serial bus will happen before the USB driver
      cleanup, so we must be careful about accessing port specific
      driver data from any USB driver functions.
      
      This problem surfaced after the commit
      
       0998d063 device-core: Ensure drvdata = NULL when no driver is bound
      
      which turned the previous unsafe access into a reliable NULL
      pointer dereference.
      
      Fixes the following Oops:
      
      [  243.148471] BUG: unable to handle kernel NULL pointer dereference at           (null)
      [  243.148508] IP: [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan]
      [  243.148556] PGD 79d60067 PUD 79d61067 PMD 0
      [  243.148590] Oops: 0000 [#1] SMP
      [  243.148617] Modules linked in: sr_mod cdrom qmi_wwan usbnet option cdc_wdm usb_wwan usbserial usb_storage uas fuse af_packet ip6table_filter ip6_tables iptable_filter ip_tables x_tables tun edd
      cpufreq_conservative cpufreq_userspace cpufreq_powersave snd_pcm_oss snd_mixer_oss acpi_cpufreq snd_seq mperf snd_seq_device coretemp arc4 sg hp_wmi sparse_keymap uvcvideo videobuf2_core
      videodev videobuf2_vmalloc videobuf2_memops rtl8192ce rtl8192c_common rtlwifi joydev pcspkr microcode mac80211 i2c_i801 lpc_ich r8169 snd_hda_codec_idt cfg80211 snd_hda_intel snd_hda_codec rfkill
      snd_hwdep snd_pcm wmi snd_timer ac snd soundcore snd_page_alloc battery uhci_hcd i915 drm_kms_helper drm i2c_algo_bit ehci_hcd thermal usbcore video usb_common button processor thermal_sys
      [  243.149007] CPU 1
      [  243.149027] Pid: 135, comm: khubd Not tainted 3.5.0-rc7-next-20120720-1-vanilla #1 Hewlett-Packard HP Mini 110-3700                /1584
      [  243.149072] RIP: 0010:[<ffffffffa0468527>]  [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan]
      [  243.149118] RSP: 0018:ffff880037e75b30  EFLAGS: 00010286
      [  243.149133] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88005912aa28
      [  243.149150] RDX: ffff88005e95f028 RSI: 0000000000000000 RDI: ffff88005f7c1a10
      [  243.149166] RBP: ffff880037e75b60 R08: 0000000000000000 R09: ffffffff812cea90
      [  243.149182] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88006539b440
      [  243.149198] R13: ffff88006539b440 R14: 0000000000000000 R15: 0000000000000000
      [  243.149216] FS:  0000000000000000(0000) GS:ffff88007ee80000(0000) knlGS:0000000000000000
      [  243.149233] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [  243.149248] CR2: 0000000000000000 CR3: 0000000079fe0000 CR4: 00000000000007e0
      [  243.149264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  243.149280] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      [  243.149298] Process khubd (pid: 135, threadinfo ffff880037e74000, task ffff880037d40600)
      [  243.149313] Stack:
      [  243.149323]  ffff880037e75b40 ffff88006539b440 ffff8800799bc830 ffff88005f7c1800
      [  243.149348]  0000000000000001 ffff88006539b448 ffff880037e75b70 ffffffffa04685e9
      [  243.149371]  ffff880037e75bc0 ffffffffa0473765 ffff880037354988 ffff88007b594800
      [  243.149395] Call Trace:
      [  243.149419]  [<ffffffffa04685e9>] usb_wwan_disconnect+0x9/0x10 [usb_wwan]
      [  243.149447]  [<ffffffffa0473765>] usb_serial_disconnect+0xd5/0x120 [usbserial]
      [  243.149511]  [<ffffffffa0046b48>] usb_unbind_interface+0x58/0x1a0 [usbcore]
      [  243.149545]  [<ffffffff8139ebd7>] __device_release_driver+0x77/0xe0
      [  243.149567]  [<ffffffff8139ec67>] device_release_driver+0x27/0x40
      [  243.149587]  [<ffffffff8139e5cf>] bus_remove_device+0xdf/0x150
      [  243.149608]  [<ffffffff8139bc78>] device_del+0x118/0x1a0
      [  243.149661]  [<ffffffffa0044590>] usb_disable_device+0xb0/0x280 [usbcore]
      [  243.149718]  [<ffffffffa003c6fd>] usb_disconnect+0x9d/0x140 [usbcore]
      [  243.149770]  [<ffffffffa003da7d>] hub_port_connect_change+0xad/0x8a0 [usbcore]
      [  243.149825]  [<ffffffffa0043bf5>] ? usb_control_msg+0xe5/0x110 [usbcore]
      [  243.149878]  [<ffffffffa003e6e3>] hub_events+0x473/0x760 [usbcore]
      [  243.149931]  [<ffffffffa003ea05>] hub_thread+0x35/0x1d0 [usbcore]
      [  243.149955]  [<ffffffff81061960>] ? add_wait_queue+0x60/0x60
      [  243.150004]  [<ffffffffa003e9d0>] ? hub_events+0x760/0x760 [usbcore]
      [  243.150026]  [<ffffffff8106133e>] kthread+0x8e/0xa0
      [  243.150047]  [<ffffffff8157ec04>] kernel_thread_helper+0x4/0x10
      [  243.150068]  [<ffffffff810612b0>] ? flush_kthread_work+0x120/0x120
      [  243.150088]  [<ffffffff8157ec00>] ? gs_change+0xb/0xb
      [  243.150101] Code: fd 41 54 53 48 83 ec 08 80 7f 1a 00 74 57 49 89 fc 31 db 90 49 8b 7c 24 20 45 31 f6 48 81 c7 10 02 00 00 e8 bc 64 f3 e0 49 89 c7 <4b> 8b 3c 37 49 83 c6 08 e8 4c a5 bd ff 49 83 fe 20
      75 ed 45 30
      [  243.150257] RIP  [<ffffffffa0468527>] stop_read_write_urbs+0x37/0x80 [usb_wwan]
      [  243.150282]  RSP <ffff880037e75b30>
      [  243.150294] CR2: 0000000000000000
      [  243.177170] ---[ end trace fba433d9015ffb8c ]---
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Reported-by: default avatarThomas Schäfer <tschaefer@t-online.de>
      Suggested-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a1028f0a
    • Mark Ferrell's avatar
      usb: serial: mos7840: Fixup mos7840_chars_in_buffer() · 5c263b92
      Mark Ferrell authored
       * Use the buffer content length as opposed to the total buffer size.  This can
         be a real problem when using the mos7840 as a usb serial-console as all
         kernel output is truncated during boot.
      Signed-off-by: default avatarMark Ferrell <mferrell@uplogix.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5c263b92
    • Bruno Morelli's avatar
      USB: isp1362-hcd.c: usb message always saved in case of underrun · 4840ae17
      Bruno Morelli authored
      The usb message must be saved also in case the USB endpoint is not a
      control endpoint (i.e., "endpoint 0"), otherwise in some circumstances
      we don't have a payload in case of error.
      
      The patch has been created by tracing with usbmon the different error
      messages generated by this driver with respect to the ehci-hcd driver.
      Signed-off-by: default avatarBruno Morelli <bruno@evidence.eu.com>
      Signed-off-by: default avatarClaudio Scordino <claudio@evidence.eu.com>
      Tested-by: default avatarBruno Morelli <bruno@evidence.eu.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4840ae17
    • Keshava Munegowda's avatar
      OMAP: USB : Fix the EHCI enumeration and core retention issue · 872c495d
      Keshava Munegowda authored
      This commit 354ab856 titled
      "Fix OMAP EHCI suspend/resume failure (i693)" is causing
      the usb hub and device detection fails in beagle XM
      causeing NFS not functional. This affects the core retention too.
      The same commit logic needs to be revisted adhering to hwmod and
      device tree framework.
      for now, this commit id 354ab856
      titled "Fix OMAP EHCI suspend/resume failure (i693)" reverted.
      
      This patch is validated on BeagleXM with NFS support over
      usb ethernet and USB mass storage and other device detection.
      Signed-off-by: default avatarKeshava Munegowda <keshava_mgowda@ti.com>
      Acked-by: default avatarFelipe Balbi <balbi@ti.com>
      Cc: stable <stable@vger.kernel.org> # 3.5
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      872c495d
    • Marc Kleine-Budde's avatar
      usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module · 71a5e61b
      Marc Kleine-Budde authored
      Since commit "5e0aa49e usb: chipidea: use generic map/unmap routines",
      the udc part of the chipidea driver needs the generic usb gadget helper
      functions. If the chipidea driver with udc support is built into the
      kernel and usb gadget is built a module, the linking of the kernel
      fails with:
      
      drivers/built-in.o: In function `_hardware_dequeue':
      drivers/usb/chipidea/udc.c:527:
          undefined reference to `usb_gadget_unmap_request'
      drivers/usb/chipidea/udc.c:1269:
          undefined reference to `usb_gadget_unmap_request'
      drivers/usb/chipidea/udc.c:1821:
          undefined reference to `usb_del_gadget_udc'
      drivers/usb/chipidea/udc.c:443:
          undefined reference to `usb_gadget_map_request'
      drivers/usb/chipidea/udc.c:1774:
          undefined reference to `usb_add_gadget_udc'
      
      This patch changes the dependencies, so that udc support can only be
      activated if the linux gadget support (USB_GADGET) is builtin or both
      chipidea driver and USB_GADGET are modular. Same dependencies for the
      chipidea host support and the linux host side USB support (USB).
      
      While there, fix the indention of chipidea the help text.
      
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Reviewed-by: default avatarFelipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      71a5e61b
    • fangxiaozhi's avatar
      USB: support the new interfaces of Huawei Data Card devices in option driver · ee6f827d
      fangxiaozhi authored
      In this patch, we add new declarations into option.c to support the new
      interfaces of Huawei Data Card devices. And at the same time, remove the
      redundant declarations from option.c.
      Signed-off-by: default avatarfangxiaozhi <huananhu@huawei.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ee6f827d
    • Ozan Çağlayan's avatar
      USB: ftdi_sio: Add VID/PID for Kondo Serial USB · 7724a1ed
      Ozan Çağlayan authored
      This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
      interface:
      http://www.kondo-robot.com/EN/wp/?cat=28
      
      Tested by controlling an RCB3 board using libRCB3.
      Signed-off-by: default avatarOzan Çağlayan <ozancag@gmail.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7724a1ed
  5. 09 Aug, 2012 3 commits
    • Greg Kroah-Hartman's avatar
      Merge tag 'for-usb-linus-2012-08-09' of... · 3557c9ae
      Greg Kroah-Hartman authored
      Merge tag 'for-usb-linus-2012-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
      
      Intel xhci: Work around immediate reboot on shutdown.
      
      Hi Greg,
      
      I'm cleaning out my queue before I leave on vacation tomorrow, so here's
      one more patch for 3.6.  It works around an issue on a couple Intel
      Panther Point desktop systems that cause them to reboot about 10 seconds
      after the user shutdowns the system.
      
      Sarah Sharp
      3557c9ae
    • Sarah Sharp's avatar
      xhci: Switch PPT ports to EHCI on shutdown. · e95829f4
      Sarah Sharp authored
      The Intel desktop boards DH77EB and DH77DF have a hardware issue that
      can be worked around by BIOS.  If the USB ports are switched to xHCI on
      shutdown, the xHCI host will send a spurious interrupt, which will wake
      the system.  Some BIOS will work around this, but not all.
      
      The bug can be avoided if the USB ports are switched back to EHCI on
      shutdown.  The Intel Windows driver switches the ports back to EHCI, so
      change the Linux xHCI driver to do the same.
      
      Unfortunately, we can't tell the two effected boards apart from other
      working motherboards, because the vendors will change the DMI strings
      for the DH77EB and DH77DF boards to their own custom names.  One example
      is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
      Panther Point xHCI host PCI vendor and device ID, and switch the ports
      over for all PPT xHCI hosts.
      
      The only impact this will have on non-effected boards is to add a couple
      hundred milliseconds delay on boot when the BIOS has to switch the ports
      over from EHCI to xHCI.
      
      This patch should be backported to kernels as old as 3.0, that contain
      the commit 69e848c2 "Intel xhci: Support
      EHCI/xHCI port switching."
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Reported-by: default avatarDenis Turischev <denis@compulab.co.il>
      Tested-by: default avatarDenis Turischev <denis@compulab.co.il>
      Cc: stable@vger.kernel.org
      e95829f4
    • Greg Kroah-Hartman's avatar
      Merge tag 'for-usb-linus-2012-08-08' of... · ded737fe
      Greg Kroah-Hartman authored
      Merge tag 'for-usb-linus-2012-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
      
      xHCI bug fixes and host quirks.
      
      Hi Greg,
      
      Here's four patches for 3.6.  Most are marked for stable as well.
      
      The first one makes the xHCI driver load properly on newer Rensas hosts.
      The next two fix issues with the Etron host incorrectly marking short
      transfers as successful, and avoiding log warning spam for hosts that
      make the same mistake.
      
      The last patch fixes a really nasty xHCI driver bug that could cause
      general protection faults when devices stall transfers.
      
      Sarah Sharp
      ded737fe
  6. 08 Aug, 2012 2 commits
    • Sarah Sharp's avatar
      xhci: Fix bug after deq ptr set to link TRB. · 50d0206f
      Sarah Sharp authored
      This patch fixes a particularly nasty bug that was revealed by the ring
      expansion patches.  The bug has been present since the very beginning of
      the xHCI driver history, and could have caused general protection faults
      from bad memory accesses.
      
      The first thing to note is that a Set TR Dequeue Pointer command can
      move the dequeue pointer to a link TRB, if the canceled or stalled
      transfer TD ended just before a link TRB.  The function to increment the
      dequeue pointer, inc_deq, was written before cancellation and stall
      support was added.  It assumed that the dequeue pointer could never
      point to a link TRB.  It would unconditionally increment the dequeue
      pointer at the start of the function, check if the pointer was now on a
      link TRB, and move it to the top of the next segment if so.
      
      This means that if a Set TR Dequeue Point command moved the dequeue
      pointer to a link TRB, a subsequent call to inc_deq() would move the
      pointer off the segment and into la-la-land.  It would then read from
      that memory to determine if it was a link TRB.  Other functions would
      often call inc_deq() until the dequeue pointer matched some other
      pointer, which means this function would quite happily read all of
      system memory before wrapping around to the right pointer value.
      
      Often, there would be another endpoint segment from a different ring
      allocated from the same DMA pool, which would be contiguous to the
      segment inc_deq just stepped off of.  inc_deq would eventually find the
      link TRB in that segment, and blindly move the dequeue pointer back to
      the top of the correct ring segment.
      
      The only reason the original code worked at all is because there was
      only one ring segment.  With the ring expansion patches, the dequeue
      pointer would eventually wrap into place, but the dequeue segment would
      be out-of-sync.  On the second TD after the dequeue pointer was moved to
      a link TRB, trb_in_td() would fail (because the dequeue pointer and
      dequeue segment were out-of-sync), and this message would appear:
      
      ERROR Transfer event TRB DMA ptr not part of current TD
      
      This fixes bugzilla entry 4333 (option-based modem unhappy on USB 3.0
      port: "Transfer event TRB DMA ptr not part of current TD", "rejecting
      I/O to offline device"),
      
      	https://bugzilla.kernel.org/show_bug.cgi?id=43333
      
      and possibly other general protection fault bugs as well.
      
      This patch should be backported to kernels as old as 2.6.31.  A separate
      patch will be created for kernels older than 3.4, since inc_deq was
      modified in 3.4 and this patch will not apply.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Tested-by: default avatarJames Ettle <theholyettlz@googlemail.com>
      Tested-by: default avatarMatthew Hall <mhall@mhcomputing.net>
      Cc: stable@vger.kernel.org
      50d0206f
    • Greg Kroah-Hartman's avatar
      Merge tag 'fixes-for-v3.6-rc1' of... · 010ccce0
      Greg Kroah-Hartman authored
      Merge tag 'fixes-for-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
      
      usb: fixes for v3.6-rc1
      
      Here are three fixes for v3.6-rc1. All on the MUSB driver and
      quite obvious. First there's a Kconfig change which was missed
      earlier, then there is a fix for the usage of the resource name
      and lastly a fix for pm_runtime usage and device initialization.
      
      The last fix is rather critical as it can end up in situations
      where we try to access device's register with clocks disabled,
      which will cause a Data Abort exception (on ARM).
      010ccce0
  7. 07 Aug, 2012 3 commits
  8. 03 Aug, 2012 3 commits
  9. 02 Aug, 2012 6 commits
    • Linus Torvalds's avatar
      Linux 3.6-rc1 · 0d7614f0
      Linus Torvalds authored
      0d7614f0
    • Linus Torvalds's avatar
      Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc · fc6bdb59
      Linus Torvalds authored
      Pull OLPC platform updates from Andres Salomon:
       "These move the OLPC Embedded Controller driver out of
        arch/x86/platform and into drivers/platform/olpc.
      
        OLPC machines are now ARM-based (which means lots of x86 and ARM
        changes), but are typically pretty self-contained..  so it makes more
        sense to go through a separate OLPC tree after getting the appropriate
        review/ACKs."
      
      * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
        x86: OLPC: move s/r-related EC cmds to EC driver
        Platform: OLPC: move global variables into priv struct
        Platform: OLPC: move debugfs support from x86 EC driver
        x86: OLPC: switch over to using new EC driver on x86
        Platform: OLPC: add a suspended flag to the EC driver
        Platform: OLPC: turn EC driver into a platform_driver
        Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
        drivers: OLPC: update various drivers to include olpc-ec.h
        Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
      fc6bdb59
    • Linus Torvalds's avatar
      Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 44d82e29
      Linus Torvalds authored
      Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
       "This contains a set of device-tree conversions for Marvell Orion
        platforms that were staged early but took a few tries to get the
        branch into a format where it was suitable for us to pick up.
      
        Given that most people working on these platforms are hobbyists with
        limited time, we were a bit more flexible with merging it even though
        it came in late."
      
      * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
        ARM: Kirkwood: Replace mrvl with marvell
        ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
        ARM: Kirkwood: Describe Dreamplug LEDs in DT.
        ARM: Kirkwood: Describe iConnects LEDs in DT.
        ARM: Kirkwood: Describe iConnects temperature sensor in DT.
        ARM: Kirkwood: Describe IB62x0 LEDs in DT.
        ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
        ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
        ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
        ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
        ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
        ARM: Kirkwood: Use DT to configure SATA device.
        ARM: kirkwood: use devicetree for SPI on dreamplug
        ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
        ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
        ARM: Kirkwood: Add basic device tree support for QNAP TS219.
        ATA: sata_mv: Add device tree support
        ARM: Orion: DTify the watchdog timer.
        ARM: Orion: Add arch support needed for I2C via DT.
        ARM: kirkwood: use devicetree for orion-spi
        ...
      
      Conflicts:
      	drivers/watchdog/orion_wdt.c
      44d82e29
    • Linus Torvalds's avatar
      Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · bfdf85df
      Linus Torvalds authored
      Pull arm-soc cpuidle enablement for OMAP from Olof Johansson:
       "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree,
        but didn't go in because the pull request ended up rejected.  So it
        just got merged, and we got this staged branch that enables the
        coupled cpuidle code on OMAP.
      
        With a stable git workflow from the other maintainer we could have
        staged this earlier, but that wasn't the case so we have had to merge
        it late.
      
        The alternative is to hold it off until 3.7 but given that the code is
        well-isolated to OMAP and they are eager to see it go in, I didn't
        push back hard in that direction."
      
      * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: OMAP4: CPUidle: Open broadcast clock-event device.
        ARM: OMAP4: CPUidle: add synchronization for coupled idle states
        ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.
        ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
      bfdf85df
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · d1494ba8
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "A few fixes for merge window fallout, and a bugfix for timer resume on
        PRIMA2."
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: mmp: add missing irqs.h
        arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
        ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
        ARM: mxc: Include missing irqs.h header
      d1494ba8
    • Linus Torvalds's avatar
      Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh · 0a276d16
      Linus Torvalds authored
      Pull SuperH fixes from Paul Mundt.
      
      * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
        sh: explicitly include sh_dma.h in setup-sh7722.c
        sh: ecovec: care CN5 VBUS if USB host mode
        sh: sh7724: fixup renesas_usbhs clock settings
        sh: intc: initial irqdomain support.
        sh: pfc: Fix up init ordering mess.
        serial: sh-sci: fix compilation breakage, when DMA is enabled
        dmaengine: shdma: restore partial transfer calculation
        sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
        sh: Fix up recursive fault in oops with unset TTB.
        sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
        sh: select the fixed regulator driver on several boards
        sh: ecovec: switch MMC power control to regulators
        sh: add fixed voltage regulators to se7724
        sh: add fixed voltage regulators to sdk7786
        sh: add fixed voltage regulators to rsk
        sh: add fixed voltage regulators to migor
        sh: add fixed voltage regulators to kfr2r09
        sh: add fixed voltage regulators to ap325rxa
        sh: add fixed voltage regulators to sh7757lcr
        sh: add fixed voltage regulators to sh2007
        ...
      0a276d16