- 25 Jan, 2024 9 commits
-
-
Ranjan Kumar authored
Update driver version to 48.100.00.00. Signed-off-by:
Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20231228114810.11923-3-ranjan.kumar@broadcom.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Ranjan Kumar authored
Add a new IOCTL command MPT3ENABLEDIAGSBRRELOAD. As a part of firmware update operation, applications use this IOCTL command to set the SBR reload bit in the Host Diagnostic register. This permits HBA firmware to be updated without powercycling the system. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312280909.MZyhxwBL-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202312281141.jDyPezRn-lkp@intel.com/Signed-off-by:
-
Eric Chanudet authored
On sa8775p-ride, probing the HBA will go through the UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is the same during the second init. The REINIT quirk only applies starting with controller v4. For these, ufs_qcom_get_hs_gear() reads the highest supported gear when setting the host_params. After the negotiation, if the host and device are on the same gear, it is the highest gear supported between the two. Skip REINIT to save some time. Signed-off-by:
Eric Chanudet <echanude@redhat.com> Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.comReviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by:
-
Andrew Halaney authored
The comments that currently are within the hw_ver < 4 conditional are misleading. They really apply to various branches of the conditionals there and incorrectly state that the phy_gear value can increase. Right now the logic is to: - Default to max supported gear for phy_gear - Set phy_gear to minimum value if version < 4 since those versions only support one PHY init sequence (and therefore don't need reinit) - Set phy_gear to the optimal value if the device version is already populated in the controller registers on boot Let's move some of the comment to outside the if statement and clean up the bit left about switching to a higher gear on reinit. This way the comment more accurately reflects the logic. Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240123-ufs-reinit-comments-v1-1-ff2b3532d7fe@redhat.comReviewed-by:
-
Martin K. Petersen authored
chenxiang <chenxiang66@hisilicon.com> says: This series contains some fixes and cleanups including: - Fix a deadlock issue related to automatic debugfs; - Remove redundant checks for automatic debugfs; - Check whether debugfs is enabled before removing or releasing it; - Remove hisi_hba->timer for v3 hw; Link: https://lore.kernel.org/r/1705904747-62186-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
-
Xiang Chen authored
hisi_hba->timer is not used for v3 hw but there are two places that some operations related to hisi_hba->timer are called by v3 hw: - Deleting the timer in function hisi_sas_v3_hw() which is only for v3 hw; - Deleting the timer in function hisi_sas_controller_reset_prepare() which is common for v1/v2/v3 hw. We can remove the timer in the first case, but for the second scenario we need to remove it only for v3 hw, so check hw->sht which is NULL only for v3 hw before deleting hisi_hba->timer. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1705904747-62186-5-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
-
Yihang Li authored
hisi_sas debugfs remove should be executed only when debugfs is enabled. Check whether debugfs is enabled and then remove it only if enabled. Signed-off-by:
Yihang Li <liyihang9@huawei.com> Signed-off-by:
-
Yihang Li authored
In commit 63f0733d ("scsi: hisi_sas: Allocate DFX memory during dump trigger"), the memory allocation time of the DFX is changed from device initialization to dump occurs, so .debugfs_itct is not a valid address and do not need to check. The parameter hisi_sas_debugfs_enable is enough to check whether automatic debugfs dump is triggered, so remove redunant checks. Fixes: 63f0733d ("scsi: hisi_sas: Allocate DFX memory during dump trigger") Signed-off-by:
-
Yihang Li authored
If we issue a disabling PHY command, the device attached with it will go offline, if a 2 bit ECC error occurs at the same time, a hung task may be found: [ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds. [ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208 [ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas] [ 4613.691518] Call trace: [ 4613.694678] __switch_to+0xf8/0x17c [ 4613.698872] __schedule+0x660/0xee0 [ 4613.703063] schedule+0xac/0x240 [ 4613.706994] schedule_timeout+0x500/0x610 [ 4613.711705] __down+0x128/0x36c [ 4613.715548] down+0x240/0x2d0 [ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main] [ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas] [ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas] [ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main] [ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main] [ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas] [ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas] [ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas] [ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas] [ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas] [ 4613.784716] process_one_work+0x248/0x950 [ 4613.789424] worker_thread+0x318/0x934 [ 4613.793878] kthread+0x190/0x200 [ 4613.797810] ret_from_fork+0x10/0x18 [ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds. [ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208 [ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main] [ 4613.841491] Call trace: [ 4613.844647] __switch_to+0xf8/0x17c [ 4613.848852] __schedule+0x660/0xee0 [ 4613.853052] schedule+0xac/0x240 [ 4613.856984] schedule_timeout+0x500/0x610 [ 4613.861695] __down+0x128/0x36c [ 4613.865542] down+0x240/0x2d0 [ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main] [ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main] [ 4613.883019] process_one_work+0x248/0x950 [ 4613.887732] worker_thread+0x318/0x934 [ 4613.892204] kthread+0x190/0x200 [ 4613.896118] ret_from_fork+0x10/0x18 [ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds. [ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208 [ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas] [ 4613.939549] Call trace: [ 4613.942702] __switch_to+0xf8/0x17c [ 4613.946892] __schedule+0x660/0xee0 [ 4613.951083] schedule+0xac/0x240 [ 4613.955015] schedule_timeout+0x500/0x610 [ 4613.959725] wait_for_common+0x200/0x610 [ 4613.964349] wait_for_completion+0x3c/0x5c [ 4613.969146] flush_workqueue+0x198/0x790 [ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas] [ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas] [ 4613.985708] process_one_work+0x248/0x950 [ 4613.990420] worker_thread+0x318/0x934 [ 4613.994868] kthread+0x190/0x200 [ 4613.998800] ret_from_fork+0x10/0x18 This is because when the device goes offline, we obtain the hisi_hba semaphore and send the ABORT_DEV command to the device. However, the internal abort timed out due to the 2 bit ECC error and triggers automatic dump. In addition, since the hisi_hba semaphore has been obtained, the dump cannot be executed and the controller cannot be reset. Therefore, the deadlocks occur on the following circular dependencies: hisi_sas_dev_gone() -> down() -> hisi_sas_internal_task_abort_dev() -> ... -> hisi_sas_internal_abort_timeout() -> down(). The deadlock is triggered only when the timeout occurs during device goes offline. To fix this issue, use .rst_ha_timeout to distinguish the scenario where a device goes offline from other scenarios. Fixes: 2ff07b5c ("scsi: hisi_sas: Directly call register snapshot instead of using workqueue") Signed-off-by:
-
- 24 Jan, 2024 16 commits
-
-
Jiapeng Chong authored
No functional modification involved. drivers/scsi/fnic/fnic_scsi.c:1964 fnic_abort_cmd() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7930Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20240118020128.24432-1-jiapeng.chong@linux.alibaba.comReviewed-by:
Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by:
-
Guixin Liu authored
To ensure that the same ID is not obtained during concurrent execution of the probe, an ida is used to manage the mrioc's ID. Signed-off-by:
Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20231229040331.52518-1-kanie@linux.alibaba.comReviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We don't need the NUL-padding behavior that strncpy() provides as vscsi is NUL-allocated in ibmvscsis_probe() which proceeds to call ibmvscsis_adapter_info(): | vscsi = kzalloc(sizeof(*vscsi), GFP_KERNEL); ibmvscsis_probe() -> ibmvscsis_handle_crq() -> ibmvscsis_parse_command() -> ibmvscsis_mad() -> ibmvscsis_process_mad() -> ibmvscsis_adapter_info() Following the same idea, `partition_name` is defiend as: | static char partition_name[PARTITION_NAMELEN] = "UNKNOWN"; ... which is NUL-padded already, meaning strscpy() is the best option. Considering the above, a suitable replacement is strscpy() [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. However, for cap->name and info let's use strscpy_pad() as they are allocated via dma_alloc_coherent(): | cap = dma_alloc_coherent(&vscsi->dma_dev->dev, olen, &token, | GFP_ATOMIC); & | info = dma_alloc_coherent(&vscsi->dma_dev->dev, sizeof(*info), &token, | GFP_ATOMIC); Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:
Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20231212-strncpy-drivers-scsi-ibmvscsi_tgt-ibmvscsi_tgt-c-v2-1-bdb9a7cd96c8@google.comAcked-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Colin Ian King authored
The pointer 'hd' is being assigned a value that is not being read later. The variable is redundant and can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'hd' is used in the enclosing expression, the value is never actually read from 'hd' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240118122039.2541425-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
The variable 'retval' is being assigned a value that is not being read afterwards. The assignment is redundant and can be removed. Cleans up clang scan warning: Although the value stored to 'retval' is used in the enclosing expression, the value is never actually read from 'retval' [deadcode.DeadStores] Signed-off-by:
-
ChanWoo Lee authored
The 'hwq' parameter is not used in this function. Remove unused parameters. Signed-off-by:
ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20240105021041.20400-3-cw9316.lee@samsung.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
ChanWoo Lee authored
Use ufshcd_mcq_req_to_hwq() to remove unnecessary variables and simplify. Signed-off-by:
-
ChanWoo Lee authored
Instead of hardcoding the register field, add the proper definition. While at it, let's also use ufshcd_rmwl() to simplify updating this register. Reviewed-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Petr Mladek authored
Both "model" and "strflags" are passed to "%s" even when one or both are NULL. It is safe because vsprintf() would detect the NULL pointer and print "(null)". But it is a kernel-specific feature and compiler warns about it: <warning> In file included from include/linux/kernel.h:19, from arch/x86/include/asm/percpu.h:27, from arch/x86/include/asm/current.h:6, from include/linux/sched.h:12, from include/linux/blkdev.h:5, from drivers/scsi/scsi_devinfo.c:3: drivers/scsi/scsi_devinfo.c: In function 'scsi_dev_info_list_add_str': >> include/linux/printk.h:434:44: warning: '%s' directive argument is null [-Wformat-overflow=] 434 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__) | ^ include/linux/printk.h:430:3: note: in definition of macro 'printk_index_wrap' 430 | _p_func(_fmt, ##__VA_ARGS__); \ | ^~~~~~~ drivers/scsi/scsi_devinfo.c:551:4: note: in expansion of macro 'printk' 551 | printk(KERN_ERR "%s: bad dev info string '%s' '%s'" | ^~~~~~ drivers/scsi/scsi_devinfo.c:552:14: note: format string is defined here 552 | " '%s'\n", __func__, vendor, model, | ^~ </warning> Do not rely on the kernel specific behavior and print the message a safe way. Reported-by:Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20240111162419.12406-1-pmladek@suse.comReviewed-by:
Chris Down <chris@chrisdown.name> Signed-off-by:
-
Peter Wang authored
Change default autosuspend timer from 2000 ms to 500 ms for the MediaTek driver. Signed-off-by:
-
Peter Wang authored
The runtime suspend timer delay is a const value in scsi_host_template which a host driver cannot modify at runtime. Move the delay to Scsi_Host to allow a driver to update it. Signed-off-by:
-
Peter Wang authored
Disable MCQ IRQ when clock is off. This is same as legacy mode. Signed-off-by:
Chun-Hung Wu <chun-hung.wu@mediatek.com> Signed-off-by:
-
Peter Wang authored
Fix TM cmd timeout issue in MCQ mode using the default resume call ufshcd_make_hba_operational() to set TM cmd DMA address. This flow is the same as UFS initialization after link startup and then setting MCQ related registers if using MCQ mode. Signed-off-by:
-
Peter Wang authored
To prevent SSU(Active) error, check link status after exiting hibern8. If link is not VS_LINK_UP, return error and do ufshcd_link_recovery. Signed-off-by:
-
Maramaina Naresh authored
The PM QoS feature found in the MediaTek UFS driver was moved to the UFSHCD core. Hence remove it from MediaTek UFS driver as it is redundant now. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Maramaina Naresh <quic_mnaresh@quicinc.com> Link: https://lore.kernel.org/r/20231219123706.6463-3-quic_mnaresh@quicinc.comReviewed-by:
-
Maramaina Naresh authored
Register UFS driver to CPU latency PM QoS framework to improve UFS device random I/O performance. PM QoS initialization will insert new QoS request into the CPU latency QoS list with the maximum latency PM_QOS_DEFAULT_VALUE value. The UFS driver will vote for performance mode on scale up and power save mode for scale down. If clock scaling feature is not enabled then voting will be based on clock on or off condition. Also provide a sysfs interface to enable/disable PM QoS feature. tiotest benchmark tool I/O performance results on sm8550 platform: 1. Without PM QoS support Type (Speed in) | Average of 18 iterations Random Write(IPOS) | 41065.13 Random Read(IPOS) | 37101.3 2. With PM QoS support Type (Speed in) | Average of 18 iterations Random Write(IPOS) | 46784.9 Random Read(IPOS) | 42943.4 (Improvement with PM QoS = ~15%). Reviewed-by:
Nitin Rawat <quic_nitirawa@quicinc.com> Signed-off-by:
Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by:
-
- 21 Jan, 2024 15 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
