Skip to content

L
linux
Switch branch/tag
  1. 07 Apr, 2015 4 commits
    • Julia Lawall's avatar
      cosa: fix error return code · a3786a5f
      Julia Lawall authored 
      Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: default avatarJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3786a5f
    • Julia Lawall's avatar
      wan: lmc: fix error return code · 27d751bf
      Julia Lawall authored 
      Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: default avatarJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27d751bf
    • David S. Miller's avatar
      Merge branch 'for-upstream' of... · 7abccdba
      David S. Miller authored 
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-04-04

Here's what's probably the last bluetooth-next pull request for 4.1:

 - Fixes for LE advertising data & advertising parameters
 - Fix for race condition with HCI_RESET flag
 - New BNEPGETSUPPFEAT ioctl, needed for certification
 - New HCI request callback type to get the resulting skb
 - Cleanups to use BIT() macro wherever possible
 - Consolidate Broadcom device entries in the btusb HCI driver
 - Check for valid flags in CMTP, HIDP & BNEP
 - Disallow local privacy & OOB data combo to prevent a potential race
 - Expose SMP & ECDH selftest results through debugfs
 - Expose current Device ID info through debugfs

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7abccdba
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c85d6975
      David S. Miller authored 
      Conflicts:
	drivers/net/ethernet/mellanox/mlx4/cmd.c
	net/core/fib_rules.c
	net/ipv4/fib_frontend.c

The fib_rules.c and fib_frontend.c conflicts were locking adjustments
in 'net' overlapping addition and removal of code in 'net-next'.

The mlx4 conflict was a bug fix in 'net' happening in the same
place a constant was being replaced with a more suitable macro.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c85d6975
  3. 06 Apr, 2015 10 commits
    • Linus Torvalds's avatar
      Linux 4.0-rc7 · f22e6e84
      Linus Torvalds authored
      f22e6e84
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 442bb4ba
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
    previously SACK'd, from Neal Cardwell.

 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
    from Cong WANG.

 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
    from Cong WANG.

 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.

 5) When we encapsulate for a tunnel device, skb->sk still points to the
    user socket.  So this leads to cases where we retraverse the
    ipv4/ipv6 output path with skb->sk being of some other address
    family (f.e. AF_PACKET).  This can cause things to crash since the
    ipv4 output path is dereferencing an AF_PACKET socket as if it were
    an ipv4 one.

    The short term fix for 'net' and -stable is to elide these socket
    checks once we've entered an encapsulation sequence by testing
    xmit_recursion.

    Longer term we have a better solution wherein we pass the tunnel's
    socket down through the output paths, but that is way too invasive
    for 'net' and -stable.

    From Hannes Frederic Sowa.

 6) l2tp_init() failure path forgets to unregister per-net ops, from
    Cong WANG.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
  net: dsa: fix filling routing table from OF description
  l2tp: unregister l2tp_net_ops on failure path
  mvneta: dont call mvneta_adjust_link() manually
  ipv6: protect skb->sk accesses from recursive dereference inside the stack
  netns: don't allocate an id for dead netns
  Revert "netns: don't clear nsid too early on removal"
  ip6mr: call del_timer_sync() in ip6mr_free_table()
  net: move fib_rules_unregister() under rtnl lock
  ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
  tcp: fix FRTO undo on cumulative ACK of SACKed range
  xen-netfront: transmit fully GSO-sized packets
      442bb4ba
    • Jack Morgenstein's avatar
      net/mlx4_core: Fix error message deprecation for ConnectX-2 cards · fde913e2
      Jack Morgenstein authored 
      Commit 1daa4303 ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: default avatarAmir Vadai <amirv@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fde913e2
    • Pavel Nakonechny's avatar
      net: dsa: fix filling routing table from OF description · 30303813
      Pavel Nakonechny authored 
      According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.

However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.

This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.

To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.

This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: default avatarPavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30303813
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 9e441639
      Linus Torvalds authored 
      Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3
      9e441639
    • WANG Cong's avatar
      l2tp: unregister l2tp_net_ops on failure path · 67e04c29
      WANG Cong authored 
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67e04c29
    • Michael S. Tsirkin's avatar
      virtio: document queue state logic · 60302ff6
      Michael S. Tsirkin authored 
      commit d631b94e
    virtio: change comment in transmit

started clarifying the logic behind queue state management,
but introduced an inaccuracy: TX_BUSY does not cause
a BUG message.

Clean this up some more, explaining the tradeoffs in detail.
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      60302ff6
    • Alexei Starovoitov's avatar
      tc: bpf: add checksum helpers · 91bc4822
      Alexei Starovoitov authored 
      Commit 608cd71a ("tc: bpf: generalize pedit action") has added the
possibility to mangle packet data to BPF programs in the tc pipeline.
This patch adds two helpers bpf_l3_csum_replace() and bpf_l4_csum_replace()
for fixing up the protocol checksums after the packet mangling.

It also adds 'flags' argument to bpf_skb_store_bytes() helper to avoid
unnecessary checksum recomputations when BPF programs adjusting l3/l4
checksums and documents all three helpers in uapi header.

Moreover, a sample program is added to show how BPF programs can make use
of the mangle and csum helpers.
Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91bc4822
    • Stas Sergeev's avatar
      mvneta: dont call mvneta_adjust_link() manually · ecf7b361
      Stas Sergeev authored 
      mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ecf7b361
    • hannes@stressinduktion.org's avatar
      ipv6: protect skb->sk accesses from recursive dereference inside the stack · f60e5990
      hannes@stressinduktion.org authored 
      We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.

ipv6 does not conform with this in three places:

1) ip6_fragment: we do consult ipv6_npinfo for frag_size

2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
   loop the packet back to the local socket

3) ip6_skb_dst_mtu could query the settings from the user socket and
   force a wrong MTU

Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.

Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f60e5990
  5. 05 Apr, 2015 3 commits
  7. 04 Apr, 2015 16 commits
  9. 03 Apr, 2015 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7