- 19 Mar, 2014 10 commits
-
-
Linus Walleij authored
This changes the following mechanisms in the TC3589x device tree probing path: - Use the .of_match_table in struct device_driver to match the device in the device tree. - Add matches for the proper compatible strings "toshiba,..." and all sub-variants, just as is done for the .id matches. - Move over all the allocation of platform data etc to the tc3589x_of_probe() function and follow the pattern of passing a platform data pointer back, or an error pointer on error, as found in the STMPE driver. - Match the new (proper) compatible strings for the GPIO and keypad MFD cells. - Use of_device_is_compatible() rather than just !strcmp() to discover which cells to instantiate. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Charles Keepax authored
Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by:
-
Krzysztof Kozlowski authored
Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon driver. If entry with such compatible is present in the DTS, the extcon driver will have of_node set. This may be useful for extcon consumers and it is documented in bindings documentation. Signed-off-by:Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Remove not needed max14577-private.h header inclusion in the main driver header. Remove obvious comment. Signed-off-by:
-
Krzysztof Kozlowski authored
Remove unused symbol: enum max14577_irq_source. Signed-off-by:
-
Linus Walleij authored
It is currently not possible to select the SA1100 or Vexpress drivers in the MFD subsystem, because the menu for the entire subsystem ends before these options are presented. Move the main menu closing and the endif for HAS_IOMEM to the end of the file so these are selectable again. Cc: stable@vger.kernel.org Signed-off-by:
-
Lee Jones authored
-
Lee Jones authored
-
Lee Jones authored
-
- 18 Mar, 2014 17 commits
-
-
Charles Keepax authored
Update the register patch based on latest evaluation of the device. Signed-off-by:
-
Sachin Kamat authored
Added initial binding documentation for S2MPA01 MFD. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Add support for S2MPA01 voltage and current regulator. Signed-off-by:
-
Sachin Kamat authored
Add the necessary entries required for S2MPA01 multi-function device. While at it also convert whitespaces to tabs in core.h. Signed-off-by:
-
Pankaj Dubey authored
When used 64bit compiler GCC warns as drivers/mfd/sec-core.c:199:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
During probe the sec-core driver allocates dummy I2C device for RTC with i2c_new_dummy() but return value is not checked. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() or i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by:
-
Krzysztof Kozlowski authored
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding interrupts are named similarly). Use consistent names for interrupts to limit possible errors. Signed-off-by:
-
Krzysztof Kozlowski authored
This patch prepares for adding support for S2MPS14 RTC driver by selecting different regmaps for S2MPS1X/S5M876X RTC devices. Signed-off-by:
-
Krzysztof Kozlowski authored
Add maximum register to the regmap used by rtc-s5m driver. Signed-off-by:
-
Sebastian Reichel authored
This is a driver for an A/D converter, which belongs into drivers/iio/adc. Signed-off-by:
Sebastian Reichel <sre@debian.org> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Sebastian Reichel authored
Add devicetree binding documentation for twl4030-madc analog digital converter. Signed-off-by:
-
Sebastian Reichel authored
Simplify reading and writing of 16 bit TWL registers in the driver by using twl_i2c_read_u16 and twl_i2c_write_u16. Signed-off-by:
Marek Belisko <marek@goldelico.com> Signed-off-by:
-
Sebastian Reichel authored
Add a simple twl_i2c_read/write_u16 wrapper over the twl_i2c_read/write, which is similar to the twl_i2c_read/write_u8 wrapper. Signed-off-by:
-
Sebastian Reichel authored
Some style fixes in twl4030-madc driver. Reported-by:
-
Sebastian Reichel authored
This converts twl4030-madc module to use the Industrial IO ADC framework and adds device tree support. Signed-off-by:
-
Sebastian Reichel authored
Update twl4030-madc driver to use managed resources. Signed-off-by:
-
- 13 Mar, 2014 8 commits
-
-
Roger Quadros authored
The omap-usb-tll driver needs one clock for each TLL channel. Add this information to the DT binding document. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
The omap-usb-host driver expects certained named clocks. Add this information to the DT binding document. Acked-by:
-
Roger Quadros authored
Use a meaningful name for the reference clocks so that it indicates the function. Update the OMAP4+ USB Host node as well to be in sync with the changes. Acked-by:
-
Roger Quadros authored
Use the proper clock name 'usbhost_120m_fck' instead of the alias 'ehci_logic_fck' Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data as well. Acked-by:
-
Roger Quadros authored
Be more strict and always fail on clk_get() error. Acked-by:
-
Roger Quadros authored
Not all revisions have all the clocks so get the necessary clocks based on hardware revision. This should avoid un-necessary clk_get failure messages that were observed earlier. Also remove the dummy USB host clocks from the OMAP3 clock data. These are no longer expected by the driver. Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data] Acked-by:
-
Roger Quadros authored
Use devm_clk_get() instead of clk_get(). Signed-off-by:
-
Colin Ian King authored
Static analysis from cppcheck issued the following warning: [drivers/mfd/omap-usb-tll.c:255]: (warning) Found calculation inside sizeof(). The current size calculation is not obvious and is easy to miscomprehend, so re-work the size of the allocation based on the size of the struct pointer and quantity to allocate. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 03 Mar, 2014 1 commit
-
-
Linus Torvalds authored
-
- 02 Mar, 2014 4 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx and tegra fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: avoid null pointer dereference at failure paths drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. drm/vmwgfx: Remove some unused surface formats drm/radeon: enable speaker allocation setup on dce3.2 drm/radeon: change audio enable logic drm/radeon: fix audio disable on dce6+ drm/radeon: free uvd ring on unload drm/radeon: disable pll sharing for DP on DCE4.1 drm/radeon: fix missing bo reservation drm/radeon: print the supported atpx function mask MAINTAINERS: update drm git tree entry MAINTAINERS: add entry for drm radeon driver drm/tegra: Add guard to avoid double disable/enable of RGB outputs gpu: host1x: do not check previously handled gathers drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are 2 USB patches for 3.14-rc5, one a new device id, and the other fixes a reported problem with threaded irqs and the USB EHCI driver" * tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: ehci: fix deadlock when threadirqs option is used USB: ftdi_sio: add Cressi Leonardo PID
-
Linus Torvalds authored
Merge tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull sysfs fix from Greg KH: "Here is a single sysfs fix for 3.14-rc5. It fixes a reported problem with the namespace code in sysfs" * tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: fix namespace refcnt leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging tree fixes from Greg KH: "Here are a few IIO fixes, and a new device id for a staging driver for 3.14-rc5. All have been in linux-next for a while, I did a final merge to get the IIO fixes into this tree, they were incorrectly in the char-misc tree for a few weeks, and I forgot to tell you to pull them from there. This makes it a single pull request for you" * tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID staging:iio:adc:MXS:LRADC: fix touchscreen statemachine iio:gyro: bug on L3GD20H gyroscope support iio: cm32181: Change cm32181 ambient light sensor driver iio: cm36651: Fix read/write integration time function.
-
