- 17 Mar, 2020 4 commits
-
-
YueHaibing authored
core99_l2_cache/core99_l3_cache do not need to be marked as volatile, remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200303085604.24952-1-yuehaibing@huawei.com
-
Ilie Halip authored
When building with ppc64_defconfig, the compiler reports that these 2 variables are not used: warning: unused variable 'core99_l2_cache' [-Wunused-variable] warning: unused variable 'core99_l3_cache' [-Wunused-variable] They are only used when CONFIG_PPC64 is not defined. Move them into a section which does the same macro check. Reported-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Ilie Halip <ilie.halip@gmail.com> [mpe: Move them into core99_init_caches() which is their only user] Signed-off-by:
-
Laurentiu Tudor authored
In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Stephen Rothwell authored
ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaf ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
-
- 13 Mar, 2020 4 commits
-
-
Oliver O'Halloran authored
The PowerNV cpufreq driver registers two notifiers: one to catch throttle messages from the OCC and one to bump the CPU frequency back to normal before a reboot. Both require the cpufreq driver to be registered in order to function since the notifier callbacks use various cpufreq_*() functions. Right now we register both notifiers before we've initialised the driver. This seems to work, but we should head off any protential problems by registering the notifiers after the driver is initialised. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
-
Joe Lawrence authored
The original 2005 patch that introduced the powerpc vdso, pre-git ("ppc64: Implement a vDSO and use it for signal trampoline") notes that: ... symbols exposed by the vDSO aren't "normal" function symbols, apps can't be expected to link against them directly, the vDSO's are both seen as if they were linked at 0 and the symbols just contain offsets to the various functions. This is done on purpose to avoid a relocation step (ppc64 functions normally have descriptors with abs addresses in them). When glibc uses those functions, it's expected to use it's own trampolines that know how to reach them. Despite that explanation, there remains dead #ifdef VDS64_HAS_DESCRIPTORS code-blocks that provide alternate function definitions that setup function descriptors. Since VDS64_HAS_DESCRIPTORS has been unused for all these years, we might as well finally remove it from the codebase. Signed-off-by:Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by:
-
Christophe Leroy authored
Commit 2efc7c08 ("powerpc/32: drop get_pteptr()"), replaced get_pteptr() by virt_to_kpte(). But virt_to_kpte() lacks a NULL pmd check and returns an invalid non NULL pointer when there is no page table. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Fixes: 2efc7c08 ("powerpc/32: drop get_pteptr()") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Tested-by:
-
- 10 Mar, 2020 1 commit
-
-
Michael Ellerman authored
Merge in our fixes branch. In particular we want to merge the TM and KUAP fixes, so we can add selftests for them in next.
-
- 05 Mar, 2020 1 commit
-
-
Michael Ellerman authored
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a163 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a163) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2 ("powerpc/64s: Implement KUAP for Radix MMU") Cc: stable@vger.kernel.org # v5.2+ Reported-by:
Stefan Berger <stefanb@linux.ibm.com> Signed-off-by:
-
- 04 Mar, 2020 26 commits
-
-
Srikar Dronamraju authored
With commit ("powerpc/numa: Early request for home node associativity"), commit 2ea62630 ("powerpc/topology: Get topology for shared processors at boot") which was requesting home node associativity becomes redundant. Hence remove the late request for home node associativity. Signed-off-by:Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Reviewed-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
Currently the kernel detects if its running on a shared lpar platform and requests home node associativity before the scheduler sched_domains are setup. However between the time NUMA setup is initialized and the request for home node associativity, workqueue initializes its per node cpumask. The per node workqueue possible cpumask may turn invalid after home node associativity resulting in weird situations like workqueue possible cpumask being a subset of workqueue online cpumask. This can be fixed by requesting home node associativity earlier just before NUMA setup. However at the NUMA setup time, kernel may not be in a position to detect if its running on a shared lpar platform. So request for home node associativity and if the request fails, fallback on the device tree property. Signed-off-by:
-
Srikar Dronamraju authored
All the sibling threads of a core have to be part of the same node. To ensure that all the sibling threads map to the same node, always lookup/update the cpu-to-node map of the first thread in the core. Signed-off-by:
-
Srikar Dronamraju authored
Currently code handles H_FUNCTION, H_SUCCESS, H_HARDWARE return codes. However hcall_vphn can return other return codes. Now it also handles H_PARAMETER return code. Also the rest return codes are handled under the default case. Signed-off-by:
-
Srikar Dronamraju authored
There is no value in unpacking associativity, if H_HOME_NODE_ASSOCIATIVITY hcall has returned an error. Signed-off-by:
-
Srikar Dronamraju authored
package_id is to match cores that are part of the same chip. On PowerNV machines, package_id defaults to chip_id. However ibm,chip_id property is not present in device-tree of PowerVM LPARs. Hence lscpu output shows one core per socket and multiple cores. To overcome this, use nid as the package_id on PowerVM LPARs. Before the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 Core(s) per socket: 1 <---------------------- Socket(s): 16 <---------------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id -1 After the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 <--------------------- Core(s) per socket: 8 <--------------------- Socket(s): 2 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id 0 Now lscpu output is more in line with the system configuration. Signed-off-by:
-
Christophe Leroy authored
Until commit 7306e83c ("powerpc: Don't use CURRENT_THREAD_INFO to find the stack"), the current stack base address was obtained by calling current_thread_info(). That inline function was simply masking out the value of r1. In that commit, it was changed to using current_stack_pointer() (since renamed current_stack_frame()), which is a heavier function as it is an outline assembly function which cannot be inlined and which reads the content of the stack at 0(r1). Convert to using current_stack_pointer for geting r1 and masking out its value to obtain the base address of the stack pointer as before. Fixes: 7306e83c ("powerpc: Don't use CURRENT_THREAD_INFO to find the stack") Signed-off-by:
-
Christophe Leroy authored
Instead of #ifdef, use IS_ENABLED(CONFIG_DEBUG_STACKOVERFLOW). This enable GCC to check for code validity even when the option is not selected. Signed-off-by:
-
Christophe Leroy authored
The purpose of check_stack_overflow() is to verify that the stack has not overflowed. To really know whether the stack pointer is still within boundaries, the check must be done directly on the value of r1. So use current_stack_pointer, which returns the current value of r1, rather than current_stack_frame() which causes a frame to be created and then returns that value. Signed-off-by:
-
Christophe Leroy authored
current_stack_frame() doesn't return the stack pointer, but the caller's stack frame. See commit bfe9a2cf ("powerpc: Reimplement __get_SP() as a function not a define") and commit acf620ec ("powerpc: Rename __get_SP() to current_stack_pointer()") for details. In some cases this is overkill or incorrect, as it doesn't return the current value of r1. So add a current_stack_pointer register global to get the value of r1 directly. Signed-off-by:
-
Michael Ellerman authored
current_stack_pointer(), which was called __get_SP(), used to just return the value in r1. But that caused problems in some cases, so it was turned into a function in commit bfe9a2cf ("powerpc: Reimplement __get_SP() as a function not a define"). Because it's a function in a separate compilation unit to all its callers, it has the effect of causing a stack frame to be created, and then returns the address of that frame. This is good in some cases like those described in the above commit, but in other cases it's overkill, we just need to know what stack page we're on. On some other arches current_stack_pointer is just a register global giving the stack pointer, and we'd like to do that too. So rename our current_stack_pointer() to current_stack_frame() to make that possible. Signed-off-by:
-
Kajol Jain authored
Many of the performance monitoring unit (PMU) SPRs are exposed in the sysfs. This may not be a desirable since "perf" API is the primary interface to program PMU and collect counter data in the system. But that said, we cant remove these sysfs files since we dont whether anyone/anything is using them. So the patch adds a new CONFIG option 'CONFIG_PMU_SYSFS' (user selectable) to be used in sysfs file creation for PMU SPRs. New option by default is disabled, but can be enabled if user needs it. Tested this patch behaviour in powernv and pseries machines. Patch is also tested for pmac32_defconfig. Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Tested-by:
Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
An attempt to refactor the current sysfs.c file. To start with a big chuck of macro #defines and dscr functions are moved to start of the file. Secondly, HAS_ #define macros are cleanup based on CONFIG_ options Finally new HAS_ macro added: 1. HAS_PPC_PA6T (for PA6T) to separate out non-PMU SPRs. 2. HAS_PPC_PMC56 to separate out PMC SPR's from HAS_PPC_PMC_CLASSIC which come under CONFIG_PPC64. Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
Add a way to manually invoke a fast-reboot rather than setting the NVRAM flag. The idea is to allow userspace to invoke a fast-reboot using the optional string argument to the reboot() system call, or using the xmon zr command so we don't need to leave around a persistent changes on a system to use the feature. Signed-off-by:
-
Oliver O'Halloran authored
Treat an empty reboot cmd string the same as a NULL string. This squashes a spurious unsupported reboot message that sometimes gets out when using xmon. Signed-off-by:
-
Michael Ellerman authored
Some of our phony targets are not marked as such. This can lead to confusing errors, eg: $ make clean $ touch install $ make install make: 'install' is up to date. $ Fix it by adding them to the PHONY variable which is marked phony in the top-level Makefile, or in scripts/Makefile.build for the boot Makefile. Suggested-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Christophe Leroy authored
On PPC32, pte_offset_map() does a kmap_atomic() in order to support page tables allocated in high memory, just like ARM and x86/32. But since at least 2008 and commit 8054a342 ("powerpc: Remove dead CONFIG_HIGHPTE"), page tables are never allocated in high memory. When the page is in low mem, kmap_atomic() just returns the page address but still disable preemption and pagefault. And it is not an inlined function, so we suffer function call for no reason. Make pte_offset_map() the same as pte_offset_kernel() and make pte_unmap() void, in the same way as PPC64 which doesn't have HIGHMEM. Signed-off-by:
-
Alexey Kardashevskiy authored
The last jump to free_exit in mm_iommu_do_alloc() happens after page pointers in struct mm_iommu_table_group_mem_t were already converted to physical addresses. Thus calling put_page() on these physical addresses will likely crash. This moves the loop which calculates the pageshift and converts page struct pointers to physical addresses later after the point when we cannot fail; thus eliminating the need to convert pointers back. Fixes: eb9d7a62 ("powerpc/mm_iommu: Fix potential deadlock") Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because of this cleanup, we get to remove a few fields in struct kvm_arch that are now unused. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Christophe JAILLET authored
In some error handling path, we should call "of_node_put(np_par)" or some resource may be leaking in case of error. Fixes: 8159df72 ("83xx: add support for the kmeter1 board.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Christophe JAILLET authored
"couldn;t" should be "couldn't". Signed-off-by:
-
- 27 Feb, 2020 1 commit
-
-
Desnes A. Nunes do Rosario authored
PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch. The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems. Fixes: 68f2f0d4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG") Signed-off-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Reviewed-by:
Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by:
-
- 25 Feb, 2020 3 commits
-
-
Christophe Leroy authored
Commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)") and commit 90ac19a8 ("[POWERPC] Abolish iopa(), mm_ptov(), io_block_mapping() from arch/powerpc") removed the use of get_pteptr() outside of mm/pgtable_32.c In mm/pgtable_32.c, the only user of get_pteptr() is change_page_attr() which operates on kernel context and on lowmem pages only. Make virt_to_kpte() available outside of mm/mem.c and use it instead of get_pteptr(), and drop get_pteptr() Signed-off-by:
-
Christophe Leroy authored
At several places pmd pointer is retrieved through the same action: pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr); or pmd = pmd_offset(pud_offset(pgd_offset_k(addr), addr), addr); Refactor this by implementing two helpers pmd_ptr() and pmd_ptr_k() This will help when adding the p4d level. Signed-off-by:
-
Christophe Leroy authored
Since commit b86fb888 ("powerpc/32: implement fast entry for syscalls on non BOOKE") and commit 1a4b739b ("powerpc/32: implement fast entry for syscalls on BOOKE"), syscalls don't use the exception entry path anymore. It is therefore pointless to restore r0 and r6-r8 after calling trace_hardirqs_off(). In the meantime, drop the '2:' label which is unused and misleading. Signed-off-by:
-
