- 10 Jan, 2023 18 commits
-
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230102181842.718010-19-jic23@kernel.orgSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the #ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Reviewed-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Reviewed-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by:
-
- 09 Dec, 2022 3 commits
-
-
Douglas Anderson authored
The elan touchscreen datasheet says that the reset GPIO only needs to be asserted for 500us in order to reset the regulator. The problem is that some boards need a level shifter between the signals on the GPIO controller and the signals on the touchscreen. All of these extra components on the line can slow the transition of the signals. On one board, we measured the reset line and saw that it took almost 1.8ms to go low. Even after we bumped up the "drive strength" of the signal from the default 2mA to 8mA we still saw it take 421us for the signal to go low. In order to account for this let's lengthen the amount of time that we keep the reset asserted. Let's bump it up from 500us to 5000us. That's still a relatively short amount of time and is much safer. It should be noted that this fixes real problems. Case in point: 1. The touchscreen power rail may be shared with another device (like an eDP panel). That means that at probe time power might already be on. 2. In probe we grab the reset GPIO and assert it (make it low). 3. We turn on power (a noop since it was already on). 4. We wait 500us. 5. We deassert the reset GPIO. With the above case and only a 500us delay we saw only a partial reset asserted, which is bad. Giving it 5ms is overkill but feels safer in case someone else has a different level shifter setup. Note that bumping up the delay to 5000 means that some configs yell about using udelay(). We'll change to using usleep_range(). We give a small range here because: - This isn't a delay that happens very often so we don't need to worry about giving a big range to allow for power efficiency. - usleep_range() is known to almost always pick the upper bound and delay that long and we really don't want to slow down the power on of the touchscreen that much. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20221208180603.v2.5.I6edfb3f459662c041563a54e5b7df727c27caaba@changeidSigned-off-by:
-
Luca Weiss authored
Convert the drv260x haptics binding to DT schema format. The only notable change from .txt format is that vbat-supply is not actually required, so don't make it a required property. Acked-by:
Andrew Davis <afd@ti.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221118174831.69793-1-luca@z3ntu.xyzSigned-off-by:
-
Fabio Estevam authored
Convert the bindings from plain text to yaml schema. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221120012135.2085631-1-festevam@gmail.comSigned-off-by:
-
- 07 Dec, 2022 19 commits
-
-
Jonathan Cameron authored
The functions using this data were protected with #ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF. Do the same for the data used only in those functions. Signed-off-by:
-
Jonathan Cameron authored
Used to test the PM changes. Signed-off-by:
-
Jonathan Cameron authored
Used to build test the PM changes. Signed-off-by:
-
Jonathan Cameron authored
Used to build test PM changes. Signed-off-by:
-
Jonathan Cameron authored
Used to test the PM changes. Signed-off-by:
-
Jonathan Cameron authored
Used to build test PM changes. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
Jonathan Cameron authored
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by:
-
