- 29 Aug, 2024 20 commits
-
-
Hongbo Li authored
Using dev_err_cast_probe() to simplify the code. Signed-off-by:
Hongbo Li <lihongbo22@huawei.com> Link: https://patch.msgid.link/20240828121551.3696520-1-lihongbo22@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Stefan Wahren says: ==================== net: vertexcom: mse102x: Minor clean-ups This series provides some minor clean-ups for the Vertexcom MSE102x driver. ==================== Link: https://patch.msgid.link/20240827191000.3244-1-wahrenst@gmx.netSigned-off-by:
-
Stefan Wahren authored
There is already a define for minimum Ethernet frame length without FCS. So used this instead of the magic number. Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240827191000.3244-6-wahrenst@gmx.netSigned-off-by:
-
Stefan Wahren authored
This message is a leftover from initial development. It's unnecessary now and can be dropped. Signed-off-by:
-
Stefan Wahren authored
At the time of MAC address assignment the netdev is not registered yet, so netdev log functions won't work as expected. While we are at this downgrade the log level to a warning, because a random MAC address is not a real error. Signed-off-by:
-
Stefan Wahren authored
As long as the MSE102x is not operational, every packet transmission will run into a TX timeout and flood the kernel log. So log only the first TX timeout and a user is at least informed about this issue. The amount of timeouts are still available via netstat. Signed-off-by:
-
Stefan Wahren authored
This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't have to care about when the functions are actually used. Also make use of pm_sleep_ptr() to discard all PM_SLEEP related stuff if CONFIG_PM_SLEEP isn't enabled. Signed-off-by:
-
Florian Westphal authored
The sctp selftest is very slow on debug kernels. Reported-by:
Florian Westphal <fw@strlen.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240827090023.8917-1-fw@strlen.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Krzysztof Kozlowski says: ==================== net: hisilicon: minor fixes Minor fixes for hisilicon ethernet driver which look too trivial to be considered for current RC. ==================== Link: https://patch.msgid.link/20240827144421.52852-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info(). Signed-off-by:
-
Krzysztof Kozlowski authored
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by:
-
Andy Shevchenko authored
GPIOF_DIR_* definitions are legacy and subject to remove. Taking this into account, remove stale comment. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240827171005.2301845-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Maxime Chevallier authored
Use the correct logic to check for the presence of a PHY device, and jump to a label that correctly releases RTNL in case of an error, as we are holding RTNL at that point. Fixes: 3688ff30 ("net: ethtool: cable-test: Target the command to the requested PHY") Closes: https://lore.kernel.org/netdev/20240827104825.5cbe0602@fedora-3.home/T/#m6bc49cdcc5cfab0d162516b92916b944a01c833fSigned-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240827092314.2500284-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Erni Sri Satya Vennela authored
Change VMBus channels macro (VRSS_CHANNEL_DEFAULT) in Linux netvsc from 8 to 16 to align with Azure Windows VM and improve networking throughput. For VMs having less than 16 vCPUS, the channels depend on number of vCPUs. For greater than 16 vCPUs, set the channels to maximum of VRSS_CHANNEL_DEFAULT and number of physical cores / 2 which is returned by netif_get_num_default_rss_queues() as a way to optimize CPU resource utilization and scale for high-end processors with many cores. Maximum number of channels are by default set to 64. Based on this change the channel creation would change as follows: ----------------------------------------------------------------- | No. of vCPU | dev_info->num_chn | channels created | ----------------------------------------------------------------- | 1-16 | 16 | vCPU | | >16 | max(16,#cores/2) | min(64 , max(16,#cores/2)) | ----------------------------------------------------------------- Performance tests showed significant improvement in throughput: - 0.54% for 16 vCPUs - 0.83% for 32 vCPUs - 0.86% for 48 vCPUs - 9.72% for 64 vCPUs - 13.57% for 96 vCPUs Signed-off-by:
Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by:
Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/1724735791-22815-1-git-send-email-ernis@linux.microsoft.comSigned-off-by:
-
Jacky Chou authored
The ethtool of this driver uses the phy API of ethtool to get the link information from PHY driver. Because the NC-SI is forced on 100Mbps and full duplex, the driver connect a fixed-link phy driver for NC-SI. The ethtool will get the link information from the fixed-link phy driver. Signed-off-by:
Jacky Chou <jacky_chou@aspeedtech.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240827030513.481469-1-jacky_chou@aspeedtech.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp: take better care of tw_substate and tw_rcv_nxt While reviewing Jason Xing recent commit (0d9e5df4 "tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process") I saw we could remove the volatile qualifier for tw_substate field, and I also added missing data-race annotations around tcptw->tw_rcv_nxt. ==================== Link: https://patch.msgid.link/20240827015250.3509197-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
No lock protects tcp tw fields. tcptw->tw_rcv_nxt can be changed from twsk_rcv_nxt_update() while other threads might read this field. Add READ_ONCE()/WRITE_ONCE() annotations, and make sure tcp_timewait_state_process() reads tcptw->tw_rcv_nxt only once. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20240827015250.3509197-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Using a volatile qualifier for a specific struct field is unusual. Use instead READ_ONCE()/WRITE_ONCE() where necessary. tcp_timewait_state_process() can change tw_substate while other threads are reading this field. Signed-off-by:
-
Jeongjun Park authored
During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. Signed-off-by:
Jeongjun Park <aha310510@gmail.com> Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.comSigned-off-by:
-
- 27 Aug, 2024 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-26 (ice) This series contains updates to ice driver only. Jake implements and uses rd32_poll_timeout to replace a jiffies loop for calling ice_sq_done. The rd32_poll_timeout() function is designed to allow simplifying other places in the driver where we need to read a register until it matches a known value. Jake, Bruce, and Przemek update ice_debug_cq() to be more robust, and more useful for tracing control queue messages sent and received by the device driver. Jake rewords several commands in the ice_control.c file which previously referred to the "Admin queue" when they were actually generic functions usable on any control queue. Jake removes the unused and unnecessary cmd_buf array allocation for send queues. This logic originally was going to be useful if we ever implemented asynchronous completion of transmit messages. This support is unlikely to materialize, so the overhead of allocating a command buffer is unnecessary. Sergey improves the log messages when the ice driver reports that the NVM version on the device is not supported by the driver. Now, these messages include both the discovered NVM version and the requested/expected NVM version. Aleksandr Mishin corrects overallocation of memory related to adding scheduler nodes. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node() ice: Report NVM version numbers on mismatch during load ice: remove unnecessary control queue cmd_buf arrays ice: reword comments referring to control queues ice: stop intermixing AQ commands/responses debug dumps ice: do not clutter debug logs with unused data ice: improve debug print for control queue messages ice: implement and use rd32_poll_timeout for ice_sq_done timeout ==================== Link: https://patch.msgid.link/20240826224655.133847-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Tristram Ha says: ==================== net: dsa: microchip: Add KSZ8895/KSZ8864 switch support This series of patches is to add KSZ8895/KSZ8864 switch support to the KSZ DSA driver. ==================== Link: https://patch.msgid.link/BYAPR11MB3558B8A089C88DFFFC09B067EC8B2@BYAPR11MB3558.namprd11.prod.outlook.comSigned-off-by:
-
Tristram Ha authored
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it shares some registers and functions in those switches already implemented in the KSZ DSA driver. Signed-off-by:
Tristram Ha <tristram.ha@microchip.com> Tested-by:
Pieter Van Trappen <pieter.van.trappen@cern.ch> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Tristram Ha authored
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after KSZ8863, so it shares some registers and functions in those switches. KSZ8895 has 5 ports and so is more similar to KSZ8795. KSZ8864 is a 4-port version of KSZ8895. The first port is removed while port 5 remains as a host port. Signed-off-by:
-
A K M Fazla Mehrab authored
Replace fput() with sockfd_put() in handshake_nl_done_doit(). Signed-off-by:
A K M Fazla Mehrab <a.mehrab@bytedance.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20240826182652.2449359-1-a.mehrab@bytedance.comSigned-off-by:
-
Shradha Gupta authored
Currently the values of WQs for RX and TX queues for MANA devices are hardcoded to default sizes. Allow configuring these values for MANA devices as ringparam configuration(get/set) through ethtool_ops. Pre-allocate buffers at the beginning of this operation, to prevent complete network loss in low-memory conditions. Signed-off-by:
Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.comSigned-off-by:
-
Pawel Dembicki authored
This commit introduces MDI-X configuration support in vsc73xx phys. Vsc73xx supports only auto mode or forced MDI. Vsc73xx have auto MDI-X disabled by default in forced speed mode. This commit enables it. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Liao Chen says: ==================== net: fix module autoloading This patchset aims to enable autoloading of some net modules. By registering MDT, the kernel is allowed to automatically bind modules to devices that match the specified compatible strings. ==================== Link: https://patch.msgid.link/20240826091858.369910-1-liaochen4@huawei.comSigned-off-by:
-
Liao Chen authored
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by:
Liao Chen <liaochen4@huawei.com> Acked-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240826091858.369910-4-liaochen4@huawei.comSigned-off-by:
-
Liao Chen authored
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by:
-
Liao Chen authored
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by:
-
Yu Liao authored
PCI core API pci_dev_id() can be used to get the BDF number for a PCI device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by:
Yu Liao <liaoyu15@huawei.com> Reviewed-by:
-
Rosen Penev authored
Currently, of_get_ethdev_address() return is checked for any return error code which means that trying to get the MAC from NVMEM cells that is backed by MTD will fail if it was not probed before ag71xx. So, lets check the return error code for EPROBE_DEFER and defer the ag71xx probe in that case until the underlying NVMEM device is live. Signed-off-by:
Robert Marko <robimarko@gmail.com> Signed-off-by:
Rosen Penev <rosenp@gmail.com> Reviewed-by:
-
Yue Haibing authored
Commit da15c78b ("liquidio CN23XX: VF register access") declared cn23xx_dump_vf_initialized_regs() but never implemented it. octeon_dump_soft_command() is never implemented and used since introduction in commit 35878618 ("liquidio: Added delayed work for periodically updating the link statistics."). And finally, a few other declarations were never implenmented since introduction in commit f21fb3ed ("Add support of Cavium Liquidio ethernet adapters"). Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
Yue Haibing authored
Commit 4863dea3 ("net: Adding support for Cavium ThunderX network controller") declared nicvf_qset_reg_{write,read}() but never implemented. Commit 4863dea3 ("net: Adding support for Cavium ThunderX network controller") declared bgx_add_dmac_addr() but no implementation. After commit 5fc7cf17 ("net: thunderx: Cleanup PHY probing code.") octeon_mdiobus_force_mod_depencency() is not used any more. Signed-off-by:
-
Jakub Kicinski authored
Dmitry Safonov via says: ==================== net/selftests: TCP-AO selftests updates First 3 patches are more-or-less cleanups/preparations. Patches 4/5 are fixes for netns file descriptors leaks/open. Patch 6 was sent to me/contributed off-list by Mohammad, who wants 32-bit kernels to run TCP-AO. Patch 7 is a workaround/fix for slow VMs. Albeit, I can't reproduce the issue, but I hope it will fix netdev flakes for connect-deny-* tests. And the biggest change is adding TCP-AO tracepoints to selftests. I think it's a good addition by the following reasons: - The related tracepoints are now tested; - It allows tcp-ao selftests to raise expectations on the kernel behavior - up from the syscalls exit statuses + net counters. - Provides tracepoints usage samples. As tracepoints are not a stable ABI, any kernel changes done to them will be reflected to the selftests, which also will allow users to see how to change their code. It's quite better than parsing dmesg (what BGP was doing pre-tracepoints, ugh). Somewhat arguably, the code parses trace_pipe, rather than uses libtraceevent (which any sane user should do). The reason behind that is the same as for rt-netlink macros instead of libmnl: I'm trying to minimize the library dependencies of the selftests. And the performance of formatting text in kernel and parsing it again in a test is not critical. Current output sample: > ok 73 Trace events matched expectations: 13 tcp_hash_md5_required[2] tcp_hash_md5_unexpected[4] tcp_hash_ao_required[3] tcp_ao_key_not_found[4] Previously, tracepoints selftests were part of kernel tcp tracepoints submission [1], but since then the code was quite changed: - Now generic tracing setup is in lib/ftrace.c, separate from lib/ftrace-tcp.c which utilizes TCP trace points. This separation allows future selftests to trace non-TCP events, i.e. to find out an skb's drop reason, which was useful in the creation of TCP-CLOSE stress-test (not in this patch set, but used in attempt to reproduce the issue from [2]). - Another change is that in the previous submission the trace events where used only to detect unexpected TCP-AO/TCP-MD5 events. In this version the selftests will fail if an expected trace event didn't appear. Let's see how reliable this is on the netdev bot - it obviously passes on my testing, but potentially may require a temporary XFAIL patch if it misbehaves on a slow VM. [1] https://lore.kernel.org/lkml/20240224-tcp-ao-tracepoints-v1-0-15f31b7f30a7@arista.com/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=33700a0c9b56 v3: https://lore.kernel.org/20240815-tcp-ao-selftests-upd-6-12-v3-0-7bd2e22bb81c@gmail.com v2: https://lore.kernel.org/20240802-tcp-ao-selftests-upd-6-12-v2-0-370c99358161@gmail.com v1: https://lore.kernel.org/20240730-tcp-ao-selftests-upd-6-12-v1-0-ffd4bf15d638@gmail.com ==================== Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-0-05623636fe8c@gmail.comSigned-off-by:
-
Dmitry Safonov authored
Setup trace points, add a new ftrace instance in order to not interfere with the rest of the system, filtering by net namespace cookies. Raise a new background thread that parses trace_pipe, matches them with the list of expected events. Wiring up trace events to selftests provides another insight if there is anything unexpected happining in the tcp-ao code (i.e. key rotation when it's not expected). Note: in real programs libtraceevent should be used instead of this manual labor of setting ftrace up and parsing. I'm not using it here as I don't want to have an .so library dependency that one would have to bring into VM or DUT (Device Under Test). Please, don't copy it over into any real world programs, that aren't tests. Signed-off-by:
Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.comSigned-off-by:
-
Dmitry Safonov authored
On tests that are expecting failure the timeout value is TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices under tests. But on a particularly slow machine/VM, 1 second might be not enough for another thread to be scheduled and attempt to connect(). It is not a problem for tests that expect connect() to succeed as the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger. One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC. But as all tests would increase the timeouts, that's going to sum up. But here is less obvious way that keeps timeouts for expected connect() failures low: just synchronize the two threads, which will assure that before counter checks the other thread got a chance to run and timeout on connect(). The expected increase of the related counter for listen() socket will yet test the expected failure. Never happens on my machine, but I suppose the majority of netdev's connect-deny-* flakes [1] are caused by this. Prevents the following testing issue: > # selftests: net/tcp_ao: connect-deny_ipv6 > # 1..21 > # # 462[lib/setup.c:243] rand seed 1720905426 > # TAP version 13 > # ok 1 Non-AO server + AO client > # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0 > # ok 3 AO server + Non-AO client > # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1 ... [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdoutSigned-off-by:
-
Mohammad Nassiri authored
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit systems. For uint64_t, we should use the 'PRIu64' macro from the inttypes.h library. This ensures that the uint64_t is printed correctly from the selftests regardless of the system architecture. Signed-off-by:
Mohammad Nassiri <mnassiri@ciena.com> [Added missing spaces in fail/ok messages and uint64_t cast in setsockopt-closed, as otherwise it was giving warnings on 64bit. And carried it to netdev ml] Signed-off-by:
-
Dmitry Safonov authored
The switch_save_ns() helper suppose to help switching to another namespace for some action and to return back to original namespace. The fd should be closed. Signed-off-by:
-
