Pull ras fixes from Thomas Gleixner:
 "A set of fixes for RAS/MCE:

   - Improve the error message when the kernel cannot recover from a MCE
     so the maximum amount of information gets provided.

   - Individually check MCE recovery features on SkyLake CPUs instead of
     assuming none when the CAPID0 register does not advertise the
     general ability for recovery.

   - Prevent MCE to output inconsistent messages which first show an
     error location and then claim that the source is unknown.

   - Prevent overwriting MCi_STATUS in the attempt to gather more
     information when a fatal MCE has alreay been detected. This leads
     to empty status values in the printout and failing to react
     promptly on the fatal event"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix incorrect "Machine check from unknown source" message
  x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
  x86/mce: Check for alternate indication of machine check recovery on Skylake
  x86/mce: Improve error message when kernel cannot recover

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(r) related issues:

   - Fix a long standing conversion issue in jiffies_to_msecs() for odd
     HZ values like 1024 or 1200 which resulted in returning 0 for small
     jiffies values due to rounding down.

   - Use the proper CONFIG symbol in the new Y2038 safe compat code for
     posix-timers. Not yet a visible breakage, but this will immediately
     trigger when the architecture support for the new interfaces is
     merged.

   - Return an error code in the STM32 clocksource driver on failure
     instead of success.

   - Remove the redundant and stale irq disabled check in the posix cpu
     timer code. The check is at the wrong place anyway and lockdep
     already covers it via the sighand lock locking coverage"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Make sure jiffies_to_msecs() preserves non-zero time periods
  posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME
  clocksource/drivers/stm32: Fix error return code
  posix-cpu-timers: Remove lockdep_assert_irqs_disabled()

Pull irq fixes from Thomas Gleixner:
 "A set of fixes mostly for the ARM/GIC world:

   - Fix the MSI affinity handling in the ls-scfg irq chip driver so it
     updates and uses the effective affinity mask correctly

   - Prevent binding LPIs to offline CPUs and respect the Cavium erratum
     which requires that LPIs which belong to an offline NUMA node are
     not bound to a CPU on a different NUMA node.

   - Free only the amount of allocated interrupts in the GIC-V2M driver
     instead of trying to free log2(nrirqs).

   - Prevent emitting SYNC and VSYNC targetting non existing interrupt
     collections in the GIC-V3 ITS driver

   - Ensure that the GIV-V3 interrupt redistributor is correctly
     reprogrammed on CPU hotplug

   - Remove a stale unused helper function"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdesc: Delete irq_desc_get_msi_desc()
  irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
  irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
  irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
  irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
  irqchip/gic-v2m: Fix SPI release on error path
  irqchip/ls-scfg-msi: Fix MSI affinity handling
  genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes for 4.18:

   - a GPIO device name fix for a regression in v4.15-rc1.

   - an errata workaround for the BCM5300X platform.

   - a fix to ftrace function graph tracing, broken for a long time with
     the fix applying cleanly back as far as v3.17.

   - addition of read barriers to in{b,w,l,q}() functions, matching
     behavior of other architectures & mirroring the equivalent addition
     to read{b,w,l,q} in v4.17-rc2.

  Plus changes to wire up new syscalls introduced in the 4.18 cycle:

   - Restartable sequences support is added, including MIPS support in
     the selftests.

   - io_pgetevents is wired up"

* tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Wire up io_pgetevents syscall
  rseq/selftests: Implement MIPS support
  MIPS: Wire up the restartable sequences (rseq) syscall
  MIPS: Add syscall detection for restartable sequences
  MIPS: Add support for restartable sequences
  MIPS: io: Add barrier after register read in inX()
  mips: ftrace: fix static function graph tracing
  MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum
  MIPS: pb44: Fix i2c-gpio GPIO descriptor table

Pull block fixes from Jens Axboe:

 - Further timeout fixes. We aren't quite there yet, so expect another
   round of fixes for that to completely close some of the IRQ vs
   completion races. (Christoph/Bart)

 - Set of NVMe fixes from the usual suspects, mostly error handling

 - Two off-by-one fixes (Dan)

 - Another bdi race fix (Jan)

 - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron)

* tag 'for-linus-20180623' of git://git.kernel.dk/linux-block:
  blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE
  bdi: Fix another oops in wb_workfn()
  lightnvm: Remove depends on HAS_DMA in case of platform dependency
  nvme-pci: limit max IO size and segments to avoid high order allocations
  nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
  nvme-fc: release io queues to allow fast fail
  nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.
  block: sed-opal: Fix a couple off by one bugs
  blk-mq-debugfs: Off by one in blk_mq_rq_state_name()
  nvmet: reset keep alive timer in controller enable
  nvme-rdma: don't override opts->queue_size
  nvme-rdma: Fix command completion race at error recovery
  nvme-rdma: fix possible free of a non-allocated async event buffer
  nvme-rdma: fix possible double free condition when failing to create a controller
  Revert "block: Add warning for bi_next not NULL in bio_endio()"
  block: fix timeout changes for legacy request drivers

Pull crypto fixes from Herbert Xu:

 - Fix use after free in chtls

 - Fix RBP breakage in sha3

 - Fix use after free in hwrng_unregister

 - Fix overread in morus640

 - Move sleep out of kernel_neon in arm64/aes-blk

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Always drop the RNG in hwrng_unregister()
  crypto: morus640 - Fix out-of-bounds access
  crypto: don't optimize keccakf()
  crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end
  crypto: chtls - use after free in chtls_pt_recvmsg()

Merge tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - fix new sparc64 adi driver test compile errors on non-sparc systems

 - fix config fragment for sync framework for improved test coverage

 - fix several tests to return correct Kselftest skip code

* tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: sparc64: Add missing SPDX License Identifiers
  selftests: sparc64: delete RUN_TESTS and EMIT_TESTS overrides
  selftests: sparc64: Fix to do nothing on non-sparc64
  selftests: sync: add config fragment for testing sync framework
  selftests: vm: return Kselftest Skip code for skipped tests
  selftests: zram: return Kselftest Skip code for skipped tests
  selftests: user: return Kselftest Skip code for skipped tests
  selftests: sysctl: return Kselftest Skip code for skipped tests
  selftests: static_keys: return Kselftest Skip code for skipped tests
  selftests: pstore: return Kselftest Skip code for skipped tests

Pull tracing fixes from Steven Rostedt:
 "This contains a few fixes and a clean up.

   - a bad merge caused an "endif" to go in the wrong place in
     scripts/Makefile.build

   - softirq tracing fix for tracing that corrupts lockdep and causes a
     false splat

   - histogram documentation typo fixes

   - fix a bad memory reference when passing in no filter to the filter
     code

   - simplify code by using the swap macro instead of open coding the
     swap"

* tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
  tracing: Fix some errors in histogram documentation
  tracing: Use swap macro in update_max_tr
  softirq: Reorder trace_softirqs_on to prevent lockdep splat
  tracing: Check for no filter when processing event filters

Make sure that RQF_TIMED_OUT is cleared when a request is reused
after a block driver timeout handler has returned BLK_EH_DONE.

Fixes: da661267 ("blk-mq: don't time out requests again that are in the timeout handler")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull powerpc fixes from Michael Ellerman:

 - a fix for hugetlb with 4K pages, broken by our recent changes for
   split PMD PTL.

 - set the correct assembler machine type on e500mc, needed since
   binutils 2.26 introduced two forms for the "wait" instruction.

 - a fix for potential missed TLB flushes with MADV_[FREE|DONTNEED] etc.
   and THP on Power9 Radix.

 - three fixes to try and make our panic handling more robust by hard
   disabling interrupts, and not marking stopped CPUs as offline because
   they haven't been properly offlined.

 - three other minor fixes.

Thanks to: Aneesh Kumar K.V, Michael Jeanson, Nicholas Piggin.

* tag 'powerpc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash/4k: Free hugetlb page table caches correctly.
  powerpc/64s/radix: Fix radix_kvm_prefetch_workaround paca access of not possible CPU
  powerpc/64s: Fix build failures with CONFIG_NMI_IPI=n
  powerpc/64: hard disable irqs on the panic()ing CPU
  powerpc: smp_send_stop do not offline stopped CPUs
  powerpc/64: hard disable irqs in panic_smp_self_stop
  powerpc/64s: Fix DT CPU features Power9 DD2.1 logic
  powerpc/64s/radix: Fix MADV_[FREE|DONTNEED] TLB flush miss problem with THP
  powerpc/e500mc: Set assembler machine type to e500mc

Pull arm64 fixes from Catalin Marinas:

 - clear buffers allocated with FORCE_CONTIGUOUS explicitly until the
   CMA code honours __GFP_ZERO

 - notrace annotation for secondary_start_kernel()

 - use early_param() instead of __setup() for "kpti=" as it is needed
   for the cpufeature callback remapping swapper to non-global mappings

 - ensure writes to swapper are ordered wrt subsequent cache maintenance
   in the kpti non-global remapping code

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
  arm64: kpti: Use early_param for kpti= command-line option
  arm64: make secondary_start_kernel() notrace
  arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Lazy FPSIMD switching fixes
   - Really disable compat ioctls on architectures that don't want it
   - Disable compat on arm64 (it was never implemented...)
   - Rely on architectural requirements for GICV on GICv3
   - Detect bad alignments in unmap_stage2_range

  x86:
   - Add nested VM entry checks to avoid broken error recovery path
   - Minor documentation fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: fix KVM_CAP_HYPERV_TLBFLUSH paragraph number
  kvm: vmx: Nested VM-entry prereqs for event inj.
  KVM: arm64: Prevent KVM_COMPAT from being selected
  KVM: Enforce error in ioctl for compat tasks when !KVM_COMPAT
  KVM: arm/arm64: add WARN_ON if size is not PAGE_SIZE aligned in unmap_stage2_range
  KVM: arm64: Avoid mistaken attempts to save SVE state for vcpus
  KVM: arm64/sve: Fix SVE trap restoration for non-current tasks
  KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put()
  arm64: Introduce sysreg_clear_set()
  KVM: arm/arm64: Drop resource size check for GICV window

Pull xen fixes from Juergen Gross:
 "This contains the following fixes/cleanups:

   - the removal of a BUG_ON() which wasn't necessary and which could
     trigger now due to a recent change

   - a correction of a long standing bug happening very rarely in Xen
     dom0 when a hypercall buffer from user land was not accessible by
     the hypervisor for very short periods of time due to e.g. page
     migration or compaction

   - usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a
     Xen-related driver (no breakage possible as using those symbols
     without others already exported via EXPORT-SYMBOL_GPL() wouldn't
     make any sense)

   - a simplification for Xen PVH or Xen ARM guests

   - some additional error handling for callers of xenbus_printf()"

* tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Remove unnecessary BUG_ON from __unbind_from_irq()
  xen: add new hypercall buffer mapping device
  xen/scsiback: add error handling for xenbus_printf
  scsi: xen-scsifront: add error handling for xenbus_printf
  xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
  xen: add error handling for xenbus_printf
  xen: share start flags between PV and PVH

syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to
wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was
WB_shutting_down after wb->bdi->dev became NULL. This indicates that
unregister_bdi() failed to call wb_shutdown() on one of wb objects.

The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus
drops bdi's reference to wb structures before going through the list of
wbs again and calling wb_shutdown() on each of them. This way the loop
iterating through all wbs can easily miss a wb if that wb has already
passed through cgwb_remove_from_bdi_list() called from wb_shutdown()
from cgwb_release_workfn() and as a result fully shutdown bdi although
wb_workfn() for this wb structure is still running. In fact there are
also other ways cgwb_bdi_unregister() can race with
cgwb_release_workfn() leading e.g. to use-after-free issues:

CPU1                            CPU2
                                cgwb_bdi_unregister()
                                  cgwb_kill(*slot);

cgwb_release()
  queue_work(cgwb_release_wq, &wb->release_work);
cgwb_release_workfn()
                                  wb = list_first_entry(&bdi->wb_list, ...)
                                  spin_unlock_irq(&cgwb_lock);
  wb_shutdown(wb);
  ...
  kfree_rcu(wb, rcu);
                                  wb_shutdown(wb); -> oops use-after-free

We solve these issues by synchronizing writeback structure shutdown from
cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That
way we also no longer need synchronization using WB_shutting_down as the
mutex provides it for CONFIG_CGROUP_WRITEBACK case and without
CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from
bdi_unregister().
Reported-by: syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.

This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.

Fixes: f992b4df ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings")
Cc: <stable@vger.kernel.org> # 4.16.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We inspect __kpti_forced early on as part of the cpufeature enable
callback which remaps the swapper page table using non-global entries.

Ensure that __kpti_forced has been updated to reflect the kpti=
command-line option before we start using it.

Fixes: ea1e3de8 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0")
Cc: <stable@vger.kernel.org> # 4.16.x-
Reported-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.

However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods.  This may break code that relies on
receiving back a non-zero value.

jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:

  - include/linux/jiffies.h does #error if HZ >= 12288,
  - kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).

Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org

KVM_CAP_HYPERV_TLBFLUSH collided with KVM_CAP_S390_PSW-BPB, its paragraph
number should now be 8.18.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This patch extends the checks done prior to a nested VM entry.
Specifically, it extends the check_vmentry_prereqs function with checks
for fields relevant to the VM-entry event injection information, as
described in the Intel SDM, volume 3.

This patch is motivated by a syzkaller bug, where a bad VM-entry
interruption information field is generated in the VMCS02, which causes
the nested VM launch to fail. Then, KVM fails to resume L1.

While KVM should be improved to correctly resume L1 execution after a
failed nested launch, this change is justified because the existing code
to resume L1 is flaky/ad-hoc and the test coverage for resuming L1 is
sparse.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marc Orr <marcorr@google.com>
[Removed comment whose parts were describing previous revisions and the
 rest was obvious from function/variable naming. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull NVMe fixes from Christoph:

"Various relatively small fixes, mostly to fix error handling of various
 sorts."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-pci: limit max IO size and segments to avoid high order allocations
  nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
  nvme-fc: release io queues to allow fast fail
  nvmet: reset keep alive timer in controller enable
  nvme-rdma: don't override opts->queue_size
  nvme-rdma: Fix command completion race at error recovery
  nvme-rdma: fix possible free of a non-allocated async event buffer
  nvme-rdma: fix possible double free condition when failing to create a controller

KVM/arm fixes for 4.18, take #1

- Lazy FPSIMD switching fixes
- Really disable compat ioctls on architectures that don't want it
- Disable compat on arm64 (it was never implemented...)
- Rely on architectural requirements for GICV on GICv3
- Detect bad alignments in unmap_stage2_range

Some injection testing resulted in the following console log:

  mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
  mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
  mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  Kernel panic - not syncing: Machine check from unknown source

This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".

The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.

It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.

We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).

[ bp: Remove unneeded severity assignment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com

mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.

However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.

Which leads to MCE records with an empty status value:

  mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
  mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}

In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.

Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de

Function irq_desc_get_msi_desc() is not referenced in the kernel (and does
not seem to have been referenced since e39758e0, 3 years ago), so
delete it.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <marc.zyngier@arm.com>
Cc: <will.deacon@arm.com>
Cc: <kstewart@linuxfoundation.org>
Cc: <julien.thierry@arm.com>
Cc: <andrew@lunn.ch>
Cc: <trivial@kernel.org>
Link: https://lkml.kernel.org/r/1529667333-92959-1-git-send-email-john.garry@huawei.com

Enabling LPIs was made a lot stricter recently, by checking that they are
disabled before enabling them. By doing so, the CPU hotplug case was missed
altogether, which leaves LPIs enabled on hotplug off (expecting the CPU to
eventually come back), and won't write a different value anyway on hotplug
on.

So skip that check if that particular case is detected

Fixes: 6eb486b6 ("irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lkml.kernel.org/r/20180622095254.5906-8-marc.zyngier@arm.com

Similarily to the SYNC operation, it must be verified that the VPE
targetted by a VLPI is backed by a valid collection in the GIC driver data
structures.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-7-marc.zyngier@arm.com

It is possible, under obscure circumstances, to convince the ITS driver to
emit a SYNC operation that targets a collection that is not bound to any
redistributor (and the target_address field is zero) because the
corresponding CPU has not been seen yet (the system has been booted with
max_cpus="something small").

If the ITS is using the linear CPU number as the target, this is not a big
deal, as we just end-up issuing a SYNC to CPU0. But if the ITS requires the
physical address of the redistributor (with GITS_TYPER.PTA==1), we end-up
asking the ITS to write to the physical address zero, which is not exactly
a good idea (there has been report of the ITS locking up). This should of
course never happen, but hey, this is SW...

In order to avoid the above disaster, let's track which collections have
been actually initialized, and let's not generate a SYNC if the collection
hasn't been properly bound to a redistributor.  Take this opportunity to
spit our a warning, in the hope that someone may report the issue if it
arrises again.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-6-marc.zyngier@arm.com

On a NUMA system, if an ITS is local to an offline node, the ITS driver may
pick an offline CPU to bind the LPI.  In this case, pick an online CPU (and
the first one will do).

But on some systems, binding an LPI to non-local node CPU may cause
deadlock (see Cavium erratum 23144).  In this case, just fail the activate
and return an error code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622095254.5906-5-marc.zyngier@arm.com

On failing to allocate the required SPIs, the actual number of interrupts
should be freed and not its log2 value.

Fixes: de337ee3 ("irqchip/gic-v2m: Add PCI Multi-MSI support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-4-marc.zyngier@arm.com

The ls-scfs-msi driver is not dealing with the effective affinity
as it should. Let's fix that, and make it clear that the effective
affinity is restricted to a single CPU. Also prevent the driver from
messing with the internals of the affinity setting infrastructure.
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-3-marc.zyngier@arm.com

Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs
slightly less useful.

Take this opportunity to also add a missing comment in the definition of
IRQCHIP_SUPPORTS_LEVEL_MSI.

Fixes: 6988e0e0 ("genirq/msi: Limit level-triggered MSI to platform devices")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com

Pull udf, quota, ext2 fixes from Jan Kara:
 "UDF:
   - fix an oops due to corrupted disk image
   - two small cleanups

  quota:
   - a fixfor lru handling
   - cleanup

  ext2:
   - a warning about a deprecated mount option"

* tag 'for_v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Drop unused arguments of udf_delete_aext()
  udf: Provide function for calculating dir entry length
  udf: Detect incorrect directory size
  ext2: add warning when specifying nocheck option
  quota: Cleanup list iteration in dqcache_shrink_scan()
  quota: reclaim least recently used dquots

Commit 910f8bef ("xen/pirq: fix error path cleanup when binding
MSIs") fixed a couple of errors in error cleanup path of
xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to
__unbind_from_irq() with an unbound irq, which would result in
triggering the BUG_ON there.

Since there is really no reason for the BUG_ON (xen_free_irq() can
operate on unbound irqs) we can remove it.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

For passing arbitrary data from user land to the Xen hypervisor the
Xen tools today are using mlock()ed buffers. Unfortunately the kernel
might change access rights of such buffers for brief periods of time
e.g. for page migration or compaction, leading to access faults in the
hypervisor, as the hypervisor can't use the locks of the kernel.

In order to solve this problem add a new device node to the Xen privcmd
driver to easily allocate hypercall buffers via mmap(). The memory is
allocated in the kernel and just mapped into user space. Marked as
VM_IO the user mapping will not be subject to page migration et al.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull drm fixes from Dave Airlie:
 "Just run of the mill fixes,

  core:
   - regression fix in device unplug

  qxl:
   - regression fix for might sleep in cursor handling

  nouveau:
   - regression fix in multi-screen cursor handling

  amdgpu:
   - switch off DC by default on Kaveri and older
   - some minor fixes

  i915:
   - some GEM regression fixes
   - doublescan mode fixes

  sun4i:
   - revert fix for a regression

  sii8620 bridge:
   - misc fixes"

* tag 'drm-fixes-2018-06-22' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/bridge/sii8620: fix display of packed pixel modes in MHL2
  drm/amdgpu: Make amdgpu_vram_mgr_bo_invisible_size always accurate
  drm/amdgpu: Refactor amdgpu_vram_mgr_bo_invisible_size helper
  drm/amdgpu: Update pin_size values before unpinning BO
  drm/amdgpu:All UVD instances share one idle_work handle
  drm/amdgpu: Don't default to DC support for Kaveri and older
  drm/amdgpu: Use kvmalloc_array for allocating VRAM manager nodes array
  drm/amd/pp: Fix uninitialized variable
  drm/i915: Enable provoking vertex fix on Gen9 systems.
  drm/i915: Fix context ban and hang accounting for client
  drm/i915: Turn off g4x DP port in .post_disable()
  drm/i915: Disallow interlaced modes on g4x DP outputs
  drm/i915: Fix PIPESTAT irq ack on i965/g4x
  drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI
  drm/i915/execlists: Avoid putting the error pointer
  drm/i915: Apply batch location restrictions before pinning
  drm/nouveau/kms/nv50-: cursors always use core channel vram ctxdma
  Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE"
  drm/atmel-hlcdc: check stride values in the first plane
  drm/bridge/sii8620: fix HDMI cable connection to dongle
  ...

Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com

Merge tag 'drm-intel-fixes-2018-06-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v4.18-rc2:
- Mostly cc: stable display fixes, including a DBLSCAN regression fix
- GEM fixes for this merge window
Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/87d0wkuypy.fsf@intel.com

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include:

   - fix an rcu deadlock in nfs_delegation_find_inode()

   - fix NFSv4 deadlocks due to not freeing the session slot in
     layoutget

   - don't send layoutreturn if the layout is already invalid

   - prevent duplicate XID allocation

   - flexfiles: Don't tie up all the rpciod threads in resends"

* tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS/flexfiles: Process writeback resends from nfsiod context as well
  pNFS/flexfiles: Don't tie up all the rpciod threads in resends
  sunrpc: Prevent duplicate XID allocation
  pNFS: Don't send layoutreturn if the layout is already invalid
  pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception
  NFS: Fix an rcu deadlock in nfs_delegation_find_inode()

Pull pin control fixes from Linus Walleij:
 "Some fallout in the pin control subsystem in the first week after the
  merge window, some minor fixes so I'd like to get it to you ASAP.

   - fix a serious kernel panic on the Mediatek driver with the external
     interrupt controller.

   - fix an uninitialized compiler warning in the owl (actions) driver.

   - allocation failure in the pinctrl-single driver.

   - pointer overwrite problem in the i.MX driver.

   - fix a small compiler warning"

* tag 'pinctrl-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller
  pinctrl: actions: Fix uninitialized error in owl_pin_config_set()
  pinctrl: single: Add allocation failure checking of saved_vals
  pinctrl: devicetree: Fix pctldev pointer overwrite
  pinctrl: mediatek: remove redundant return value check of platform_get_resource()