- 29 Apr, 2018 40 commits
-
-
Xin Long authored
[ Upstream commit ddea788c ] After Commit 8a8efa22 ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22 ("bonding: sync netpoll code with bridge") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Schwidefsky authored
[ Upstream commit 6cf09958 ] The main linker script vmlinux.lds.S for the kernel image merges the expoline code patch tables into two section ".nospec_call_table" and ".nospec_return_table". This is *not* done for the modules, there the sections retain their original names as generated by gcc: ".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg". The module_finalize code has to check for the compiler generated section names, otherwise no code patching is done. This slows down the module code in case of "spectre_v2=off". Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6a3d1e81 ] With CONFIG_EXPOLINE_AUTO=y the call of spectre_v2_auto_early() via early_initcall is done *after* the early_param functions. This overwrites any settings done with the nobp/no_spectre_v2/spectre_v2 parameters. The code patching for the kernel is done after the evaluation of the early parameters but before the early_initcall is done. The end result is a kernel image that is patched correctly but the kernel modules are not. Make sure that the nospec auto detection function is called before the early parameters are evaluated and before the code patching is done. Fixes: 6e179d64 ("s390: add automatic detection of the spectre defense") Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d424986f ] Set CONFIG_GENERIC_CPU_VULNERABILITIES and provide the two functions cpu_show_spectre_v1 and cpu_show_spectre_v2 to report the spectre mitigations. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit bc035599 ] Add a boot message if either of the spectre defenses is active. The message is "Spectre V2 mitigation: execute trampolines." or "Spectre V2 mitigation: limited branch prediction." Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6e179d64 ] Automatically decide between nobp vs. expolines if the spectre_v2=auto kernel parameter is specified or CONFIG_EXPOLINE_AUTO=y is set. The decision made at boot time due to CONFIG_EXPOLINE_AUTO=y being set can be overruled with the nobp, nospec and spectre_v2 kernel parameters. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit b2e2f43a ] Keep the code for the nobp parameter handling with the code for expolines. Both are related to the spectre v2 mitigation. Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit d3f46896 ] when a system call is interrupted we might call the critical section cleanup handler that re-does some of the operations. When we are between .Lsysc_vtime and .Lsysc_do_svc we might also redo the saving of the problem state registers r0-r7: .Lcleanup_system_call: [...] 0: # update accounting time stamp mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER # set up saved register r11 lg %r15,__LC_KERNEL_STACK la %r9,STACK_FRAME_OVERHEAD(%r15) stg %r9,24(%r11) # r11 pt_regs pointer # fill pt_regs mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC ---> stmg %r0,%r7,__PT_R0(%r9) The problem is now, that we might have already zeroed out r0. The fix is to move the zeroing of r0 after sysc_do_svc. Reported-by:
Farhan Ali <alifm@linux.vnet.ibm.com> Fixes: 7041d281 ("s390: scrub registers on kernel entry and KVM exit") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d5feec04 ] The system call path can be interrupted before the switch back to the standard branch prediction with BPENTER has been done. The critical section cleanup code skips forward to .Lsysc_do_svc and bypasses the BPENTER. In this case the kernel and all subsequent code will run with the limited branch prediction. Fixes: eacf67eb9b32 ("s390: run user space and KVM guests with modified branch prediction") Signed-off-by:
-
Eugeniu Rosca authored
[ Upstream commit 2cb370d6 ] I've accidentally stumbled upon the IS_ENABLED(EXPOLINE_*) lines, which obviously always evaluate to false. Fix this. Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit f315104a ] If the guest runs with bp isolation when doing a SIE instruction, we must also run the nested guest with bp isolation when emulating that SIE instruction. This is done by activating BPBC in the lpar, which acts as an override for lower level guests. Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit f19fbd5e ] Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and -mfunction_return= compiler options to create a kernel fortified against the specte v2 attack. With CONFIG_EXPOLINE=y all indirect branches will be issued with an execute type instruction. For z10 or newer the EXRL instruction will be used, for older machines the EX instruction. The typical indirect call basr %r14,%r1 is replaced with a PC relative call to a new thunk brasl %r14,__s390x_indirect_jump_r1 The thunk contains the EXRL/EX instruction to the indirect branch __s390x_indirect_jump_r1: exrl 0,0f j . 0: br %r1 The detour via the execute type instruction has a performance impact. To get rid of the detour the new kernel parameter "nospectre_v2" and "spectre_v2=[on,off,auto]" can be used. If the parameter is specified the kernel and module code will be patched at runtime. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 6b73044b ] Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary plumbing in entry.S to be able to run user space and KVM guests with limited branch prediction. To switch a user space process to limited branch prediction the s390_isolate_bp() function has to be call, and to run a vCPU of a KVM guest associated with the current task with limited branch prediction call s390_isolate_bp_guest(). Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit d768bd89 ] Add the PPA instruction to the system entry and exit path to switch the kernel to a different branch prediction behaviour. The instructions are added via CPU alternatives and can be disabled with the "nospec" or the "nobp=0" kernel parameter. If the default behaviour selected with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be used to enable the changed kernel branch prediction. Acked-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit cf148998 ] To be able to switch off specific CPU alternatives with kernel parameters make a copy of the facility bit mask provided by STFLE and use the copy for the decision to apply an alternative. Reviewed-by:
-
Martin Schwidefsky authored
[ Upstream commit e2dd8333 ] Add an optimized version of the array_index_mask_nospec function for s390 based on a compare and a subtract with borrow. Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit 7041d281 ] Clear all user space registers on entry to the kernel and all KVM guest registers on KVM guest exit if the register does not contain either a parameter or a result value. Reviewed-by:
-
Christian Borntraeger authored
[ Upstream commit 35b3fde6 ] The new firmware interfaces for branch prediction behaviour changes are transparently available for the guest. Nevertheless, there is new state attached that should be migrated and properly resetted. Provide a mechanism for handling reset, migration and VSIE. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit 049a2c2d ] Remove the CPU_ALTERNATIVES config option and enable the code unconditionally. The config option was only added to avoid a conflict with the named saved segment support. Since that code is gone there is no reason to keep the CPU_ALTERNATIVES config option. Just enable it unconditionally to also reduce the number of config options and make it less likely that something breaks. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 686140a1 ] Implement CPU alternatives, which allows to optionally patch newer instructions at runtime, based on CPU facilities availability. A new kernel boot parameter "noaltinstr" disables patching. Current implementation is derived from x86 alternatives. Although ideal instructions padding (when altinstr is longer then oldinstr) is added at compile time, and no oldinstr nops optimization has to be done at runtime. Also couple of compile time sanity checks are done: 1. oldinstr and altinstr must be <= 254 bytes long, 2. oldinstr and altinstr must not have an odd length. alternative(oldinstr, altinstr, facility); alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2); Both compile time and runtime padding consists of either 6/4/2 bytes nop or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes. .altinstructions and .altinstr_replacement sections are part of __init_begin : __init_end region and are freed after initialization. Signed-off-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by:
-
Sinan Kaya authored
commit 821cdad5 upstream. Sporadic reset issues have been observed with an Intel 750 NVMe drive while assigning the physical function to the guest machine. The sequence of events observed is as follows: - perform a Function Level Reset (FLR) - sleep up to 1000ms total - read ~0 from PCI_COMMAND (CRS completion for config read) - warn that the device didn't return from FLR - touch the device before it's ready - device drops config writes when we restore register settings (there's no mechanism for software to learn about CRS completions for writes) - incomplete register restore leaves device in inconsistent state - device probe fails because device is in inconsistent state After reset, an endpoint may respond to config requests with Configuration Request Retry Status (CRS) to indicate that it is not ready to accept new requests. See PCIe r3.1, sec 2.3.1 and 6.6.2. Increase the timeout value from 1 second to 60 seconds to cover the period where device responds with CRS and also report polling progress. Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> [bhelgaas: include the mandatory 100ms in the delays we print] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Karthikeyan Periyasamy authored
commit 55cc11da upstream. This reverts commit 55884c04. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by:
Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit f5a26acf Mike writes: It seems that commit f5a26acf ("pinctrl: intel: Initialize GPIO properly when used through irqchip") can cause problems on some Skylake systems with Sunrisepoint PCH-H. Namely on certain systems it may turn the backlight PWM pin from native mode to GPIO which makes the screen blank during boot. There is more information here: https://bugzilla.redhat.com/show_bug.cgi?id=1543769 The actual reason is that GPIO numbering used in BIOS is using "Windows" numbers meaning that they don't match the hardware 1:1 and because of this a wrong pin (backlight PWM) is picked and switched to GPIO mode. There is a proper fix for this but since it has quite many dependencies on commits that cannot be considered stable material, I suggest we revert commit f5a26acf from stable trees 4.9, 4.14 and 4.15 to prevent the backlight issue. Reported-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Fixes: f5a26acf ("pinctrl: intel: Initialize GPIO properly when used through irqchip") Cc: Daniel Drake <drake@endlessm.com> Cc: Chris Chiu <chiu@endlessm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Grant Grundler authored
commit 90841047 upstream. This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by:
Grant Grundler <grundler@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Benjamin Beichler authored
commit 8cfd36a0 upstream. When destroying a net namespace, all hwsim interfaces, which are not created in default namespace are deleted. But the async deletion of the interfaces could last longer than the actual destruction of the namespace, which results to an use after free bug. Therefore use synchronous deletion in this case. Fixes: 100cb9ff ("mac80211_hwsim: Allow managing radios from non-initial namespaces") Reported-by: syzbot+70ce058e01259de7bb1d@syzkaller.appspotmail.com Signed-off-by:
Benjamin Beichler <benjamin.beichler@uni-rostock.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Imre Deak authored
commit 5e1df40f upstream. Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a8) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> (Rebased for v4.9 stable tree due to upstream intel_cdclk.c, cdclk_state and pcu_lock change) Signed-off-by:
-
Leon Romanovsky authored
commit 75a45982 upstream. mlx5 modify_qp() relies on FW that the error will be thrown if wrong state is supplied. The missing check in FW causes the following crash while using XRC_TGT QPs. [ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null) [ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.771894] PGD 800000001472e067 P4D 800000001472e067 PUD 14529067 PMD 0 [ 14.773126] Oops: 0002 [#1] SMP PTI [ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted 4.16.0-rc1-00038-g8151138c0793 #119 [ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.778417] RSP: 0018:ffffbf48001c7bd8 EFLAGS: 00010246 [ 14.779346] RAX: 0000000000000000 RBX: ffff9a8f9447d400 RCX: 0000000000000000 [ 14.780643] RDX: 0000000000000000 RSI: 000000000000000a RDI: 0000000000000000 [ 14.781930] RBP: 0000000000000000 R08: 00000000000217b0 R09: ffffffffbc9c1504 [ 14.783214] R10: fffff4a180519480 R11: ffff9a8f94523600 R12: ffff9a8f9493e240 [ 14.784507] R13: ffff9a8f9447d738 R14: 000000000000050a R15: 0000000000000000 [ 14.785800] FS: 00007f545b466700(0000) GS:ffff9a8f9fc00000(0000) knlGS:0000000000000000 [ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.787792] CR2: 0000000000000000 CR3: 00000000144be000 CR4: 00000000000006b0 [ 14.788689] Call Trace: [ 14.789007] _ib_modify_qp+0x71/0x120 [ 14.789475] modify_qp.isra.20+0x207/0x2f0 [ 14.790010] ib_uverbs_modify_qp+0x90/0xe0 [ 14.790532] ib_uverbs_write+0x1d2/0x3c0 [ 14.791049] ? __handle_mm_fault+0x93c/0xe40 [ 14.791644] __vfs_write+0x36/0x180 [ 14.792096] ? handle_mm_fault+0xc1/0x210 [ 14.792601] vfs_write+0xad/0x1e0 [ 14.793018] SyS_write+0x52/0xc0 [ 14.793422] do_syscall_64+0x75/0x180 [ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 14.794527] RIP: 0033:0x7f545ad76099 [ 14.794975] RSP: 002b:00007ffd78787468 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 14.795958] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f545ad76099 [ 14.797075] RDX: 0000000000000078 RSI: 0000000020009000 RDI: 0000000000000003 [ 14.798140] RBP: 00007ffd78787470 R08: 00007ffd78787480 R09: 00007ffd78787480 [ 14.799207] R10: 00007ffd78787480 R11: 0000000000000287 R12: 00005599ada98760 [ 14.800277] R13: 00007ffd78787560 R14: 0000000000000000 R15: 0000000000000000 [ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00 00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00 00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c [ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP: ffffbf48001c7bd8 [ 14.804838] CR2: 0000000000000000 [ 14.805288] ---[ end trace 3f1da0df5c8b7c37 ]--- Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 78b562fb upstream. Return immediately when we find issue in the user stack checks. The error value could get overwritten by following check for PERF_SAMPLE_REGS_INTR. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Cc: x86@kernel.org Fixes: 60e2364e ("perf: Add ability to sample machine state on interrupt") Link: http://lkml.kernel.org/r/20180415092352.12403-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 5af44ca5 upstream. The syzbot hit KASAN bug in perf_callchain_store having the entry stored behind the allocated bounds [1]. We miss the sample_max_stack check for the initial event that allocates callchain buffers. This missing check allows to create an event with sample_max_stack value bigger than the global sysctl maximum: # sysctl -a | grep perf_event_max_stack kernel.perf_event_max_stack = 127 # perf record -vv -C 1 -e cycles/max-stack=256/ kill ... perf_event_attr: size 112 ... sample_max_stack 256 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4 Note the '-C 1', which forces perf record to create just single event. Otherwise it opens event for every cpu, then the sample_max_stack check fails on the second event and all's fine. The fix is to run the sample_max_stack check also for the first event with callchains. [1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2 Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit e2d05499 which is commit 1d6b3c9b upstream. It breaks the build, so obviously none of us actually tested it :( Reported-by:
Maxime Hadjinlian <maxime.hadjinlian@gmail.com> Reported-by:
Akemi Yagi <toracat@elrepo.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Sahitya Tummala authored
commit dbfcef6b upstream. Below is the synchronization issue between unmount and kjournald2 contexts, which results into use after free issue in kjournald2(). Fix this issue by using journal->j_state_lock to synchronize the wait_event() done in journal_kill_thread() and the wake_up() done in kjournald2(). TASK 1: umount cmd: |--jbd2_journal_destroy() { |--journal_kill_thread() { write_lock(&journal->j_state_lock); journal->j_flags |= JBD2_UNMOUNT; ... write_unlock(&journal->j_state_lock); wake_up(&journal->j_wait_commit); TASK 2 wakes up here: kjournald2() { ... checks JBD2_UNMOUNT flag and calls goto end-loop; ... end_loop: write_unlock(&journal->j_state_lock); journal->j_task = NULL; --> If this thread gets pre-empted here, then TASK 1 wait_event will exit even before this thread is completely done. wait_event(journal->j_wait_done_commit, journal->j_task == NULL); ... write_lock(&journal->j_state_lock); write_unlock(&journal->j_state_lock); } |--kfree(journal); } } wake_up(&journal->j_wait_done_commit); --> this step now results into use after free issue. } Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Felix Fietkau authored
commit a34d0a0d upstream. In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: "QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a state in which a read of AR_CFG always returns 0xdeadbeef. This should not happen when when the power_mode of the device is ATH9K_PM_AWAKE." Include the check for the default register state in the existing MAC hang check. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Paul Burton authored
commit de96ec2a upstream. When allocating a struct alias_prop, of_alias_scan() only requested that it be aligned on a 4 byte boundary. The struct contains pointers which leads to us attempting 64 bit writes on 64 bit systems, and if the CPU doesn't support unaligned memory accesses then this causes problems - for example on some MIPS64r2 CPUs including the "mips64r2-generic" QEMU emulated CPU it will trigger an address error exception. Fix this by requesting alignment for the struct alias_prop allocation matching that which the compiler expects, using the __alignof__ keyword. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14306/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit d08876f5 upstream. We pass an int pointer to stk_camera_read_reg() but only write to the highest byte. It's a bug on big endian systems and generally a nasty thing to do and doesn't match the write function either. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Colin Ian King authored
commit a1b94355 upstream. acpi_match_device can potentially return NULL, so it is prudent to check if acpi_id is null before it is dereferenced. Add a check and an error message to indicate the failure. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Dmitry Torokhov authored
commit 74c82dae upstream. We were accidentally initializing haptics->rated_voltage twice, and did not initialize overdrive voltage. Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Matt Redfearn authored
commit a3078e59 upstream. Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little endian peripherals. Without this patch, big endian kernels fail to communicate with little endian periperals, such as PCI devices, on QEMU and FPGA based platforms. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15105/Signed-off-by:
-
Merlijn Wajer authored
commit 94e46a4f upstream. This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by:
Merlijn Wajer <merlijn@wizzup.org> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Merlijn Wajer authored
commit df6b074d upstream. Without pm_runtime_{get,put}_sync calls in place, reading vbus status via /sys causes the following error: Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 pgd = b333e822 [fa0ab060] *pgd=48011452(bad) [<c05261b0>] (musb_default_readb) from [<c0525bd0>] (musb_vbus_show+0x58/0xe4) [<c0525bd0>] (musb_vbus_show) from [<c04c0148>] (dev_attr_show+0x20/0x44) [<c04c0148>] (dev_attr_show) from [<c0259f74>] (sysfs_kf_seq_show+0x80/0xdc) [<c0259f74>] (sysfs_kf_seq_show) from [<c0210bac>] (seq_read+0x250/0x448) [<c0210bac>] (seq_read) from [<c01edb40>] (__vfs_read+0x1c/0x118) [<c01edb40>] (__vfs_read) from [<c01edccc>] (vfs_read+0x90/0x144) [<c01edccc>] (vfs_read) from [<c01ee1d0>] (SyS_read+0x3c/0x74) [<c01ee1d0>] (SyS_read) from [<c0106fe0>] (ret_fast_syscall+0x0/0x54) Solution was suggested by Tony Lindgren <tony@atomide.com>. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andreas Kemnade authored
commit 17539f2f upstream. On dm3730 there are enumeration problems after resume. Investigation led to the cause that the MUSB_POWER_SOFTCONN bit is not set. If it was set before suspend (because it was enabled via musb_pullup()), it is set in musb_restore_context() so the pullup is enabled. But then musb_start() is called which overwrites MUSB_POWER and therefore disables MUSB_POWER_SOFTCONN, so no pullup is enabled and the device is not enumerated. So let's do a subset of what musb_start() does in the same way as musb_suspend() does it. Platform-specific stuff it still called as there might be some phy-related stuff which needs to be enabled. Also interrupts are enabled, as it was the original idea of calling musb_start() in musb_resume() according to Commit 6fc6f4b8 ("usb: musb: Disable interrupts on suspend, enable them on resume") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Tested-by:
-
