- 18 Nov, 2022 37 commits
-
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: change GSI firmware load specification Currently, GSI firmware must be loaded for IPA before it can be used--either by the modem, or by the AP. New hardware supports a third option, with the bootloader taking responsibility for loading GSI firmware. In that case, neither the AP nor the modem needs to do that. The first patch in this series deprecates the "modem-init" Device Tree property in the IPA binding, using a new "qcom,gsi-loader" property instead. The second and third implement logic in the code to support either the "old" or the "new" way of specifying how GSI firmware is loaded. The last two patches implement a new value for the "qcom,gsi-loader" property. If the value is "skip", neither the AP nor modem needs to load the GSI firmware. The first of these patches implements the change in the IPA binding; the second implements it in the code. ==================== Link: https://lore.kernel.org/r/20221116073257.34010-1-elder@linaro.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
Define a new value "skip" for the "qcom,gsi-loader" Device Tree property. If used, it indicates that neither the AP nor the modem need to load GSI firmware (because it has already been loaded--for example by the boot loader). Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Add a new enumerated value to those defined for the qcom,gsi-loader property. If the qcom,gsi-loader is "skip", the GSI firmware will already be loaded, so neither the AP nor modem is required to load GSI firmware. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Alex Elder authored
Introduce a new way of specifying how the GSI firmware gets loaded for IPA. Currently, this is indicated by the presence or absence of the Boolean "modem-init" Device Tree property. The new property must have a value--either "self" or "modem"--which indicates whether the AP or modem is the GSI firmware loader, respectively. For legacy systems, the new property will not exist, and the "modem-init" property will be used. For newer systems, the "qcom,gsi-loader" property *must* exist, and must have one of the two prescribed values. It is an error to have both properties defined, and it is an error for the new property to have an unrecognized value. Signed-off-by:
-
Alex Elder authored
The GSI layer used for IPA requires firmware to be loaded. Currently either the AP or the modem loads the firmware, distinguished by whether the "modem-init" Device Tree property is defined. Some newer systems implement a third option. In preparation for that, encapsulate the code that determines how the GSI firmware gets loaded in a new function, ipa_firmware_loader(). Signed-off-by:
-
Alex Elder authored
GSI firmware for IPA must be loaded during initialization, either by the AP or by the modem. The loader is currently specified based on whether the Boolean modem-init property is present. Instead, use a new property with an enumerated value to indicate explicitly how GSI firmware gets loaded. With this in place, a third approach can be added in an upcoming patch. The new qcom,gsi-loader property has two defined values: - self: The AP loads GSI firmware - modem: The modem loads GSI firmware The modem-init property must still be supported, but is now marked deprecated. Update the example so it represents the SC7180 SoC, and provide examples for the qcom,gsi-loader, memory-region, and firmware-name properties. Signed-off-by:
-
Xin Long authored
Move these two macros from net/sctp/sctp.h to linux/sctp.h, so that it will be enough to include only linux/sctp.h in nft_exthdr.c and xt_sctp.c. It should not include "net/sctp/sctp.h" if a module does not have a dependence on SCTP module. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Saeed Mahameed <saeed@kernel.org> Link: https://lore.kernel.org/r/ef6468a687f36da06f575c2131cd4612f6b7be88.1668526821.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
Currently "net/sctp/checksum.h" including "net/sctp/sctp.h" is included in quite some places in netfilter and openswitch and net/sched. It's not necessary to include "net/sctp/sctp.h" if a module does not have dependence on SCTP, "linux/sctp.h" is the right one to include. Signed-off-by:
-
Jakub Kicinski authored
Michal Wilczynski says: ==================== Implement devlink-rate API and extend it This patch series implements devlink-rate for ice driver. Unfortunately current API isn't flexible enough for our use case, so there is a need to extend it. Some functions have been introduced to enable the driver to export current Tx scheduling configuration. Pasting justification for this series from commit implementing devlink-rate in ice driver(that is a part of this series): There is a need to support modification of Tx scheduler tree, in the ice driver. This will allow user to control Tx settings of each node in the internal hierarchy of nodes. As a result user will be able to use Hierarchy QoS implemented entirely in the hardware. This patch implemenents devlink-rate API. It also exports initial default hierarchy. It's mostly dictated by the fact that the tree can't be removed entirely, all we can do is enable the user to modify it. For example root node shouldn't ever be removed, also nodes that have children are off-limits. Example initial tree with 2 VF's: [root@fedora ~]# devlink port function rate show pci/0000:4b:00.0/node_27: type node parent node_26 pci/0000:4b:00.0/node_26: type node parent node_0 pci/0000:4b:00.0/node_34: type node parent node_33 pci/0000:4b:00.0/node_33: type node parent node_32 pci/0000:4b:00.0/node_32: type node parent node_16 pci/0000:4b:00.0/node_19: type node parent node_18 pci/0000:4b:00.0/node_18: type node parent node_17 pci/0000:4b:00.0/node_17: type node parent node_16 pci/0000:4b:00.0/node_21: type node parent node_20 pci/0000:4b:00.0/node_20: type node parent node_3 pci/0000:4b:00.0/node_14: type node parent node_5 pci/0000:4b:00.0/node_5: type node parent node_3 pci/0000:4b:00.0/node_13: type node parent node_4 pci/0000:4b:00.0/node_12: type node parent node_4 pci/0000:4b:00.0/node_11: type node parent node_4 pci/0000:4b:00.0/node_10: type node parent node_4 pci/0000:4b:00.0/node_9: type node parent node_4 pci/0000:4b:00.0/node_8: type node parent node_4 pci/0000:4b:00.0/node_7: type node parent node_4 pci/0000:4b:00.0/node_6: type node parent node_4 pci/0000:4b:00.0/node_4: type node parent node_3 pci/0000:4b:00.0/node_3: type node parent node_16 pci/0000:4b:00.0/node_16: type node parent node_15 pci/0000:4b:00.0/node_15: type node parent node_0 pci/0000:4b:00.0/node_2: type node parent node_1 pci/0000:4b:00.0/node_1: type node parent node_0 pci/0000:4b:00.0/node_0: type node pci/0000:4b:00.0/1: type leaf parent node_27 pci/0000:4b:00.0/2: type leaf parent node_27 Let me visualize part of the tree: +---------+ | node_0 | +---------+ | +----v----+ | node_26 | +----+----+ | +----v----+ | node_27 | +----+----+ | |-----------------| +----v----+ +----v----+ | VF 1 | | VF 2 | +----+----+ +----+----+ So at this point there is a couple things that can be done. For example we could only assign parameters to VF's. [root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \ tx_max 5Gbps This would cap the VF 1 BW to 5Gbps. But let's say you would like to create a completely new branch. This can be done like this: [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom parent node_0 [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom_1 parent node_custom [root@fedora ~]# devlink port function rate set \ pci/0000:4b:00.0/1 parent node_custom_1 This creates a completely new branch and reassigns VF 1 to it. A number of parameters is supported per each node: tx_max, tx_share, tx_priority and tx_weight. ==================== Link: https://lore.kernel.org/r/20221115104825.172668-1-michal.wilczynski@intel.comSigned-off-by: -
Michal Wilczynski authored
Provide documentation for newly introduced netlink attributes for devlink-rate: tx_priority and tx_weight. Mention the possibility to export tree from the driver. Signed-off-by:
Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by:
-
Michal Wilczynski authored
Add documentation to a newly added devlink-rate feature. Provide some examples on how to use the commands, which netlink attributes are supported and descriptions of the attributes. Signed-off-by:
-
Michal Wilczynski authored
ADQ, DCB might interfere with Custom Tx Scheduler changes that user might introduce using devlink-rate API. Check if ADQ, DCB is active, when user tries to change any setting in exported Tx scheduler tree. If any of those are active block the user from doing so, and log an appropriate message. Remove the exported hierarchy if user enable ADQ or DCB. Prevent ADQ or DCB from getting configured if user already made some changes using devlink-rate API. Signed-off-by:
-
Michal Wilczynski authored
There is a need to support modification of Tx scheduler tree, in the ice driver. This will allow user to control Tx settings of each node in the internal hierarchy of nodes. As a result user will be able to use Hierarchy QoS implemented entirely in the hardware. This patch implemenents devlink-rate API. It also exports initial default hierarchy. It's mostly dictated by the fact that the tree can't be removed entirely, all we can do is enable the user to modify it. For example root node shouldn't ever be removed, also nodes that have children are off-limits. Example initial tree with 2 VF's: [root@fedora ~]# devlink port function rate show pci/0000:4b:00.0/node_27: type node parent node_26 pci/0000:4b:00.0/node_26: type node parent node_0 pci/0000:4b:00.0/node_34: type node parent node_33 pci/0000:4b:00.0/node_33: type node parent node_32 pci/0000:4b:00.0/node_32: type node parent node_16 pci/0000:4b:00.0/node_19: type node parent node_18 pci/0000:4b:00.0/node_18: type node parent node_17 pci/0000:4b:00.0/node_17: type node parent node_16 pci/0000:4b:00.0/node_21: type node parent node_20 pci/0000:4b:00.0/node_20: type node parent node_3 pci/0000:4b:00.0/node_14: type node parent node_5 pci/0000:4b:00.0/node_5: type node parent node_3 pci/0000:4b:00.0/node_13: type node parent node_4 pci/0000:4b:00.0/node_12: type node parent node_4 pci/0000:4b:00.0/node_11: type node parent node_4 pci/0000:4b:00.0/node_10: type node parent node_4 pci/0000:4b:00.0/node_9: type node parent node_4 pci/0000:4b:00.0/node_8: type node parent node_4 pci/0000:4b:00.0/node_7: type node parent node_4 pci/0000:4b:00.0/node_6: type node parent node_4 pci/0000:4b:00.0/node_4: type node parent node_3 pci/0000:4b:00.0/node_3: type node parent node_16 pci/0000:4b:00.0/node_16: type node parent node_15 pci/0000:4b:00.0/node_15: type node parent node_0 pci/0000:4b:00.0/node_2: type node parent node_1 pci/0000:4b:00.0/node_1: type node parent node_0 pci/0000:4b:00.0/node_0: type node pci/0000:4b:00.0/1: type leaf parent node_27 pci/0000:4b:00.0/2: type leaf parent node_27 Let me visualize part of the tree: +---------+ | node_0 | +---------+ | +----v----+ | node_26 | +----+----+ | +----v----+ | node_27 | +----+----+ | |-----------------| +----v----+ +----v----+ | VF 1 | | VF 2 | +----+----+ +----+----+ So at this point there is a couple things that can be done. For example we could only assign parameters to VF's. [root@fedora ~]# devlink port function rate set pci/0000:4b:00.0/1 \ tx_max 5Gbps This would cap the VF 1 BW to 5Gbps. But let's say you would like to create a completely new branch. This can be done like this: [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom parent node_0 [root@fedora ~]# devlink port function rate add \ pci/0000:4b:00.0/node_custom_1 parent node_custom [root@fedora ~]# devlink port function rate set \ pci/0000:4b:00.0/1 parent node_custom_1 This creates a completely new branch and reassigns VF 1 to it. A number of parameters is supported per each node: tx_max, tx_share, tx_priority and tx_weight. Signed-off-by: -
Michal Wilczynski authored
devlink-rate API requires a priv object to be allocated when node still doesn't have a parent. This is problematic, because ice_sched_node can't be currently created without a parent. Add an option to pre-allocate memory for ice_sched_node struct. Add new arguments to ice_sched_add() and ice_sched_add_elems() that allow for pre-allocation of memory for ice_sched_node struct. Signed-off-by:
-
Michal Wilczynski authored
To support new devlink-rate API ice_sched_node struct needs to store a number of additional parameters. This includes tx_max, tx_share, tx_weight, and tx_priority. Add new fields to ice_sched_node struct. Add new functions to configure the hardware with new parameters. Introduce new xarray to identify nodes uniquely. Signed-off-by:
-
Michal Wilczynski authored
Currently the driver is able to create leaf nodes for the devlink-rate, but is unable to set parent for them. This wasn't as issue before the possibility to export hierarchy from the driver. After adding the export feature, in order for the driver to supply correct hierarchy, it's necessary for it to be able to supply a parent name to devl_rate_leaf_create(). Introduce a new parameter 'parent_name' in devl_rate_leaf_create(). Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Michal Wilczynski authored
Currently it's not possible to reassign the parent of the node using one command. As the previous commit introduced a way to export entire hierarchy from the driver, being able to modify and reassign parents become important. This way user might easily change QoS settings without interrupting traffic. Example command: devlink port function rate set pci/0000:4b:00.0/1 parent node_custom_1 This reassigns leaf node parent to node_custom_1. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
-
Michal Wilczynski authored
Intel 100G card internal firmware hierarchy for Hierarchicial QoS is very rigid and can't be easily removed. This requires an ability to export default hierarchy to allow user to modify it. Currently the driver is only able to create the 'leaf' nodes, which usually represent the vport. This is not enough for HQoS implemented in Intel hardware. Introduce new function devl_rate_node_create() that allows for creation of the devlink-rate nodes from the driver. Signed-off-by:
-
Michal Wilczynski authored
To fully utilize offload capabilities of Intel 100G card QoS capabilities new attribute 'tx_weight' needs to be introduced. This attribute allows for usage of Weighted Fair Queuing arbitration scheme among siblings. This arbitration scheme can be used simultaneously with the strict priority. Introduce new attribute in devlink-rate that will allow for configuration of Weighted Fair Queueing. New attribute is optional. Signed-off-by:
-
Michal Wilczynski authored
To fully utilize offload capabilities of Intel 100G card QoS capabilities new attribute 'tx_priority' needs to be introduced. This attribute allows for usage of strict priority arbiter among siblings. This arbitration scheme attempts to schedule nodes based on their priority as long as the nodes remain within their bandwidth limit. Introduce new attribute in devlink-rate that will allow for configuration of strict priority. New attribute is optional. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Autoload DSA tagging driver when dynamically changing protocol This patch set solves the issue reported by Michael and Heiko here: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/ making full use of Michael's suggestion of having two modaliases: one gets used for loading the tagging protocol when it's the default one reported by the switch driver, the other gets loaded at user's request, by name. # modinfo tag_ocelot filename: /lib/modules/6.1.0-rc4+/kernel/net/dsa/tag_ocelot.ko license: GPL v2 alias: dsa_tag:seville alias: dsa_tag:id-21 alias: dsa_tag:ocelot alias: dsa_tag:id-15 depends: dsa_core intree: Y name: tag_ocelot vermagic: 6.1.0-rc4+ SMP preempt mod_unload modversions aarch64 Tested on NXP LS1028A-RDB with the following device tree addition: &mscc_felix_port4 { dsa-tag-protocol = "ocelot-8021q"; }; &mscc_felix_port5 { dsa-tag-protocol = "ocelot-8021q"; }; CONFIG_NET_DSA and everything that depends on it is built as module. Everything auto-loads, and "cat /sys/class/net/eno2/dsa/tagging" shows "ocelot-8021q". Traffic works as well. Furthermore, "echo ocelot-8021q" into the aforementioned sysfs file now auto-loads the driver for it. ==================== Link: https://lore.kernel.org/r/20221115011847.2843127-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Issue a request_module() call when an attempt to change the tagging protocol is made, either by sysfs or by device tree. In the case of ocelot (the only driver for which the default and the alternative tagging protocol are compiled as different modules), the user is now no longer required to insert tag_ocelot_8021q.ko manually. In the particular case of ocelot, this solves a problem where tag_ocelot_8021q.ko is built as module, and this is present in the device tree: &mscc_felix_port4 { dsa-tag-protocol = "ocelot-8021q"; }; &mscc_felix_port5 { dsa-tag-protocol = "ocelot-8021q"; }; Because no one attempts to load the module into the kernel at boot time, the switch driver will fail to probe (actually forever defer) until someone manually inserts tag_ocelot_8021q.ko. This is now no longer necessary and happens automatically. Rename dsa_find_tagger_by_name() to denote the change in functionality: there is now feature parity with dsa_tag_driver_get_by_id(), i.o.w. we also load the module if it's missing. Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/Suggested-by:Michael Walle <michael@walle.cc> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28 w/ ocelot_8021q Tested-by:
-
Vladimir Oltean authored
A future patch will introduce one more way of getting a reference on a tagging protocl driver (by name). Rename the current method to "by_id". Signed-off-by:
-
Vladimir Oltean authored
Currently, dsa_find_tagger_by_name() uses sysfs_streq() which works both with strings that contain \n at the end (echo ocelot > .../dsa/tagging) and with strings that don't (printf ocelot > .../dsa/tagging). There will be a problem once we'll want to construct the modalias string based on which we auto-load the protocol kernel module. If the sysfs buffer ends in a newline, we need to strip it first. This is a preparatory patch specifically for that. Signed-off-by:
-
Vladimir Oltean authored
Currently, tagging protocol drivers have a modalias of "dsa_tag:id-<number>", where the number is one of DSA_TAG_PROTO_*_VALUE. This modalias makes it possible for the request_module() call in dsa_tag_driver_get() to work, given the input it has - an integer returned by ds->ops->get_tag_protocol(). It is also possible to change tagging protocols at (pseudo-)runtime, via sysfs or via device tree, and this works via the name string of the tagging protocol rather than via its id (DSA_TAG_PROTO_*_VALUE). In the latter case, there is no request_module() call, because there is no association that the DSA core has between the string name and the ID, to construct the modalias. The module is simply assumed to have been inserted. This is actually slightly problematic when the tagging protocol change should take place at probe time, since it's expected that the dependency module should get autoloaded. For this purpose, let's introduce a second modalias, so that the DSA core can call request_module() by name. There is no reason to make the modalias by name optional, so just modify the MODULE_ALIAS_DSA_TAG_DRIVER() macro to take both the ID and the name as arguments, and generate two modaliases behind the scenes. Suggested-by:
-
Vladimir Oltean authored
It's autumn cleanup time, and today's target are modaliases. Michael says that for users of modinfo, "dsa_tag-20" is not the most suggestive name, and recommends a change to "dsa_tag-id-20". Andrew points out that other modaliases have a prefix delimited by colons, so he recommends "dsa_tag:20" instead of "dsa_tag-20". To satisfy both proposals, Florian recommends "dsa_tag:id-20". The modaliases are not stable ABI, and the essential information (protocol ID) is still conveyed in the new string, which request_module() must be adapted to form. Link: 20221027210830.3577793-1-vladimir.oltean@nxp.com Suggested-by:
Andrew Lunn <andrew@lunn.ch> Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The DSA tagging protocol driver macros are in the public include/net/dsa.h probably because that's also where the DSA_TAG_PROTO_*_VALUE macros are (MODULE_ALIAS_DSA_TAG_DRIVER hinges on those macro definitions). But there is no reason to expose these helpers to <net/dsa.h>. That header is shared between switch drivers (drivers/net/dsa/), tagging protocol drivers (net/dsa/tag_*.c), the DSA core (net/dsa/ sans tag_*.c), and the rest of the world (DSA master drivers, network stack, etc). Too much exposure. On the other hand, net/dsa/dsa_priv.h is included only by the DSA core and by DSA tagging protocol drivers (or IOW, "friend" modules). Also a bit too much exposure - I've contemplated creating a new header which is only included by tagging protocol drivers, but completely separating a new dsa_tag_proto.h from dsa_priv.h is not immediately trivial - for example dsa_slave_to_port() is used both from the fast path and from the control path. So for now, move these definitions to dsa_priv.h which at least hides them from the world. Signed-off-by:
-
Robert Marko authored
IPQ5018, IPQ6018 and IPQ8074 require clock-names to be set as driver is requesting the clock based on it and not index, so document that and make it required for the listed SoC-s. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
-
Robert Marko authored
Now that we can match the platforms requiring clocks by compatible start using those to allow clocks per compatible and make them required. Signed-off-by:
-
Robert Marko authored
Allow using IPQ8074 specific compatible along with the fallback IPQ4019 one in order to be able to specify which compatibles require clocks to be able to validate them via schema. Signed-off-by:
-
Robert Marko authored
Document IPQ6018 compatible that is already being used in the DTS along with the fallback IPQ4019 compatible as driver itself only gets probed on IPQ4019 and IPQ5018 compatibles. This is also required in order to specify which platform require clock to be defined and validate it in schema. Signed-off-by:
-
Jakub Kicinski authored
Rasmus Villemoes says: ==================== net: dsa: use more appropriate NET_NAME_* constants for user ports The intention of commit 685343fc ("net: add name_assign_type netdev attribute") was clearly that drivers be switched over one by one to select appropriate NET_NAME_* constants instead of NET_NAME_UNKNOWN. This small series attempts to do that for DSA user ports. This is obviously and intentionally user-visible changes, so there's a small chance that it could lead to a regression. To make it easy to revert either of the "label in DT" and "fallback to eth%d" changes, this is done as a refactoring which shouldn't introduce any functional change (but by itself adds code which looks a little odd, with the two identical assignments in the two branches), followed by changing the constant used in each case in two different patches. ==================== Link: https://lore.kernel.org/r/20221116105205.1127843-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
When a user port does not have a label in device tree, and we thus fall back to the eth%d scheme, the proper constant to use is NET_NAME_ENUM. See also commit e9f656b7 ("net: ethernet: set default assignment identifier to NET_NAME_ENUM"), which in turn quoted commit 685343fc ("net: add name_assign_type netdev attribute"): ... when the kernel has given the interface a name using global device enumeration based on order of discovery (ethX, wlanY, etc) ... are labelled NET_NAME_ENUM. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Florian Fainelli <f.faineli@gmail.com> Signed-off-by:
-
Rasmus Villemoes authored
When a user port has a label in device tree, the corresponding netdevice is, to quote include/uapi/linux/netdevice.h, "predictably named by the kernel". This is also explicitly one of the intended use cases for NET_NAME_PREDICTABLE, quoting 685343fc ("net: add name_assign_type netdev attribute"): NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way [...] Examples include [...] and names deduced from hardware properties (including being given explicitly by the firmware). Expose that information properly for the benefit of userspace tools that make decisions based on the name_assign_type attribute, e.g. a systemd-udev rule with "kernel" in NamePolicy. Signed-off-by:
-
Rasmus Villemoes authored
The following two patches each have a (small) chance of causing regressions for userspace and will in that case of course need to be reverted. In order to prepare for that and make those two patches independent and individually revertable, refactor the code which sets the names for user ports by moving the "fall back to eth%d if no label is given in device tree" to dsa_slave_create(). No functional change (at least none intended). Signed-off-by:
-
Vincent Mailhol authored
Many of the drivers which implement ethtool_ops::get_drvinfo() will prints the .driver, .version or .bus_info of struct ethtool_drvinfo. To have a glance of current state, do: $ git grep -W "get_drvinfo(struct" Printing in those three fields is useless because: - since [1], the driver version should be the kernel version (at least for upstream drivers). Arguably, out of tree drivers might still want to set a custom version, but out of tree is not our focus. - since [2], the core is able to provide default values for .driver and .bus_info. In summary, drivers may provide .fw_version and .erom_version, the rest is expected to be done by the core. In struct ethtool_ops doc from linux/ethtool: rephrase field get_drvinfo() doc to discourage developers from implementing this callback. In struct ethtool_drvinfo doc from uapi/linux/ethtool.h: remove the paragraph mentioning what drivers should do. Rationale: no need to repeat what is already written in struct ethtool_ops doc. But add a note that .fw_version and .erom_version are driver defined. Also update the dummy driver and simply remove the callback in order not to confuse the newcomers: most of the drivers will not need this callback function any more. [1] commit 6a7e25c7 ("net/core: Replace driver version to be kernel version") Link: https://git.kernel.org/torvalds/linux/c/6a7e25c7fb48 [2] commit edaf5df2 ("ethtool: ethtool_get_drvinfo: populate drvinfo fields even if callback exits") Link: https://git.kernel.org/netdev/net-next/c/edaf5df22cb8Reviewed-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20221116171828.4093-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
include/linux/bpf.h 1f6e04a1 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496ac ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64 ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/Signed-off-by:
-
- 17 Nov, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Current release - regressions: - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init() Previous releases - regressions: - bridge: fix memory leaks when changing VLAN protocol - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims - dsa: don't leak tagger-owned storage on switch driver unbind - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6 is removed - eth: stmmac: ensure tx function is not running in stmmac_xdp_release() - eth: hns3: fix return value check bug of rx copybreak Previous releases - always broken: - kcm: close race conditions on sk_receive_queue - bpf: fix alignment problem in bpf_prog_test_run_skb() - bpf: fix writing offset in case of fault in strncpy_from_kernel_nofault - eth: macvlan: use built-in RCU list checking - eth: marvell: add sleep time after enabling the loopback bit - eth: octeon_ep: fix potential memory leak in octep_device_setup() Misc: - tcp: configurable source port perturb table size - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)" * tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: use struct_group to copy ip/ipv6 header addresses net: usb: smsc95xx: fix external PHY reset net: usb: qmi_wwan: add Telit 0x103a composition netdevsim: Fix memory leak of nsim_dev->fa_cookie tcp: configurable source port perturb table size l2tp: Serialize access to sk_user_data with sk_callback_lock net: thunderbolt: Fix error handling in tbnet_init() net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() net: dsa: don't leak tagger-owned storage on switch driver unbind net/x25: Fix skb leak in x25_lapb_receive_frame() net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() bridge: switchdev: Fix memory leaks when changing VLAN protocol net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process net: hns3: fix return value check bug of rx copybreak net: hns3: fix incorrect hw rss hash type of rx packet net: phy: marvell: add sleep time after enabling the loopback bit net: ena: Fix error handling in ena_init() kcm: close race conditions on sk_receive_queue net: ionic: Fix error handling in ionic_init_module() ... -
Dan Carpenter authored
The rswitch_etha_wait_link_verification() is supposed to return zero on success or negative error codes. Unfortunately it is declared as a bool so the caller treats everything as success. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/Y3OPo6AOL6PTvXFU@kiliSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Dmitry Vyukov authored
The current virtual nci driver is great for testing and fuzzing. But it allows to create at most one "global" device which does not allow to run parallel tests and harms fuzzing isolation and reproducibility. Restructure the driver to allow creation of multiple independent devices. This should be backwards compatible for existing tests. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20221115100017.787929-1-dvyukov@google.comSigned-off-by:
-
