The prox/range bits included in the Bluetooth reports from the Intuos Pro
were being ignored, leading to two issues. Firstly, the pen would never
announce a BTN_TOOL_PEN event with value 0, leaving userspace to believe
the pen was always active. Secondly, the driver would continue to send
events for data while the packet's "prox" bit was clear. This can lead
to sudden incorrect pointer jumps if the pen is slowly moved away from
the tablet surface.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Non-generic devices have numbered_buttons set for both pen and
touch interfaces by default. The actual number of buttons on the
interface is normally manually decided later, which is different
from what those HID generic devices are processed, where number
of buttons are directly retrieved from HID descriptors.

This patch adds the missed HID_GENERIC check and moves the statement
to wacom_setup_pad_input_capabilities since it's not a quirk anymore.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for the LEDs around the mode switch to the generic code path in
support of the second generation Intuos Pro.
Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The second generation Intuos Pro is the first device in the generic codepath
which has a touchswitch. We utilize a flag in wacom_shared in order to report
this switch event received from the pad on the touch input.
Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add vendor defined touch to support the second generation Intuos Pro.
Previously all generic Wacom devices used true HID to report their touch.
Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for the touchring to the generic code path in support of the second
generation Intuos Pro.

We also add checks for usage->type to ensure that we handle the usage before we
report it, or change the inrange_state based on it.
Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Input_event_flag duplicates the information we track in
wacom_wac->hid_data.inrange_state for the pad.
Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In addition to its USB interface, the second-generation Intuos Pro
includes a Bluetooth radio that offers two pairing interfaces: classic
and low-energy. The classic interface functions just like the earlier
Bluetooth-enabled Intuos4 and Graphire4 tablets, appearing as a HID device
that our driver can work with. The low-energy interface is intented to
be used by userspace applications that make use of its paper-to-digital
capabilities.

Despite the USB interface using Wacom's new vendor-defined HID usages,
the Bluetooth interface provides us with useless black-box "blob"
report descriptors like past devices. We thus have to explicitly add
support for the PIDs and reports used.

These devices pack a /lot/ of information into a single Bluetooth
input report. Each report contains up to seven snapshots of the pen
state, four snapshots of the touch state (of five touches each), pad
state, and battery data. Thankfully this isn't too hard for the driver
to report -- it just takes a fair amount of code to extract!
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Centralize our definition of report IDs by moving those for device commands
into wacom_wac.h alongside those for input reports.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There no reason a Bluetooth device with the appropriate HID descriptor couldn't
be used through the HID_GENERIC codepath in the future. Ensure that the driver
attempts to bind to these devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Intuos Pro seems to not like when we set the features right after
being powered up. Instead of waiting during probe, we can schedule the
switch mode and LED control in a deferred worker so that we don't have the
5 secs of delay from USB when the device is not accessible.

The USB timeout delays were really a pain because if you happen to unplug
the tablet while it is still waiting, you are just adding 5 second timeouts
to the USB stack. Which means that a new plug of the same tablet will also
gets delayed, and will also attempt to access the hardware while in
.probe(). So the tablet doesn't appear in the dmesg, the user unplug/replug
it to make it appearing... and so on so forth.

Really, this is for the best :)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When the LED class gets removed, it actually tries to reset the LED.
However, the device being disconnected, the set_report fails.

Previously, the attempt to cut lose this last event was through unsetting
the HID drvdata, but it was not working properly. Simply reset the LED
groups to NULL makes a more efficient solution.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In the general case, the resources are properly released by devm without
needing to do anything. However, when unplugging the wireless receiver,
the kernel segfaults from time to time while calling devres_release_all().

I think in that case the resources attempt to access hid_get_drvdata(hdev)
which has been set to null while leaving wacom_remove().
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - regression fix for generic Wacom devices, from Jason Gerecke

 - DMA-on-stack fixes for hid-corsair driver, from Johan Hovold

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Fix sibling detection regression
  HID: corsair: fix control-transfer error handling
  HID: corsair: fix DMA buffers on stack

Pull two s390 bug fixes from Martin Schwidefsky:
 "Two changes, the first is a fix to add a missing memory clobber to the
  inline assembly to load control registers. This has not caused any
  issues so far, but who knows what code gcc will generate in future
  versions.

  The second change is an update for the default configurations. This
  includes CONFIG_BUG_ON_DATA_CORRUPTION=y, we want this to be enabled
  for s390. The usual approach to debug problems on production systems
  is to use crash on a system dump and for us avoiding data corruptions
  is priority one"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/ctl_reg: make __ctl_load a full memory barrier

Pull xen fix from Juergen Gross:
 "A fix for Xen running in nested virtualization environment"

* tag 'for-linus-4.10-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  partially revert "xen: Remove event channel notification through Xen PCI platform device"

Commit 345857bb ("HID: wacom: generic: Add support for sensor offsets") included
a change to the operation and location of the call to 'wacom_add_shared_data'
in 'wacom_parse_and_register'. The modifications included moving it higher up
so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This
was done to prevent a crash that would have occured when the report containing
tablet offsets was fed into the driver with 'wacom_hid_report_raw_event'
(specifically: the various 'wacom_wac_*_report' functions were written with the
assumption that they would only be called once tablet setup had completed;
'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet
allocated).

Moving the call to 'wacom_add_shared_data' effectively prevented the crash but
also broke the sibiling detection code which assumes that the HID descriptor
has been read and the various device_type flags set.

To fix this situation, we restore the original 'wacom_add_shared_data'
operation and location and instead implement an alternative change that can
also prevent the crash. Specifically, we notice that the report functions
mentioned above expect to be called only for input reports.  By adding a check,
we can prevent feature reports (such as the offset report) from
causing trouble.

Fixes: 345857bb ("HID: wacom: generic: Add support for sensor offsets")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull UBIFS fixes from Richard Weinberger:
 "This contains fixes for UBIFS:

   - a long standing issue in UBIFS journal replay code

   - fallout from the merge window"

* tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix journal replay wrt. xattr nodes
  ubifs: remove redundant checks for encryption key
  ubifs: allow encryption ioctls in compat mode
  ubifs: add CONFIG_BLOCK dependency for encryption
  ubifs: fix unencrypted journal write
  ubifs: ensure zero err is returned on successful return

Pull ARM fixes from Russell King:
 "A few ARM fixes:

   - fix a crash while performing TLB maintanence on early ARM SMP cores

   - blacklist Scorpion CPUs for hardware breakpoints

   - ARMs asm/types.h has been included as part of the UAPI due to the
     way the makefiles work, move it to uapi/asm/types.h to make it
     official

   - fix up ftrace syscall name matching"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8613/1: Fix the uaccess crash on PB11MPCore
  MAINTAINERS: update rmk's entries
  ARM: put types.h in uapi
  ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
  ARM: 8632/1: ftrace: fix syscall name matching

Pull SMP hotplug update from Thomas Gleixner:
 "This contains a trivial typo fix and an extension to the core code for
  dynamically allocating states in the prepare stage.

  The extension is necessary right now because we need a proper way to
  unbreak LTTNG, which iscurrently non functional due to the removal of
  the notifiers. Surely it's out of tree, but it's widely used by
  distros.

  The simple solution would have been to reserve a state for LTTNG, but
  I'm not fond about unused crap in the kernel and the dynamic range,
  which we admittedly should have done right away, allows us to remove
  quite some of the hardcoded states, i.e. those which have no ordering
  requirements. So doing the right thing now is better than having an
  smaller intermediate solution which needs to be reworked anyway"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Provide dynamic range for prepare stage
  perf/x86/amd/ibs: Fix typo after cleanup state names in cpu/hotplug

Pull timer fix from Ingo Molnar:
 "Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU
  hotplug operations"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/exynos_mct: Clear interrupt when cpu is shut down

Pull RCU fixes from Ingo Molnar:
 "This fixes sporadic ACPI related hangs in synchronize_rcu() that were
  caused by the ACPI code mistakenly relying on an aspect of RCU that
  was neither promised to work nor reliable but which happened to work -
  until in v4.9 we changed the RCU implementation, which made the hangs
  more prominent.

  Since the mis-use of the RCU facility wasn't properly detected and
  prevented either, these fixes make the RCU side work reliably instead
  of working around the problem in the ACPI code.

  Hence the slightly larger diffstat that goes beyond the normal scope
  of RCU fixes in -rc kernels"

* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Narrow early boot window of illegal synchronous grace periods
  rcu: Remove cond_resched() from Tiny synchronize_sched()

Pull perf fixes from Ingo Molnar:
 "An Intel PMU driver hotplug fix and three 'perf probe' tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug
  perf probe: Fix to probe on gcc generated functions in modules
  perf probe: Add error checks to offline probe post-processing
  perf probe: Fix to show correct locations for events on modules

Pull modules fix from Jessica Yu:

 - fix out-of-tree module breakage when it supplies its own definitions
   of true and false

* tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  taint/module: Fix problems when out-of-kernel driver defines true or false

Commit 7fd8329b ("taint/module: Clean up global and module taint
flags handling") used the key words true and false as character members
of a new struct. These names cause problems when out-of-kernel modules
such as VirtualBox include their own definitions of true and false.

Fixes: 7fd8329b ("taint/module: Clean up global and module taint flags handling")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jessica Yu <jeyu@redhat.com>

Pull networking fixes from David Miller:

 1) Handle multicast packets properly in fast-RX path of mac80211, from
    Johannes Berg.

 2) Because of a logic bug, the user can't actually force SW
    checksumming on r8152 devices. This makes diagnosis of hw
    checksumming bugs really annoying. Fix from Hayes Wang.

 3) VXLAN route lookup does not take the source and destination ports
    into account, which means IPSEC policies cannot be matched properly.
    Fix from Martynas Pumputis.

 4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.

 5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.

 6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
    construction properly in fib_dump_info(), from David Ahern.

 7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
    Schmidt.

 8) Openvswitch conntack actions need to maintain a correct checksum,
    fix from Lance Richardson.

 9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
    fact it already checks this, but not in all of the necessary spots.
    Fix from Basil Gunn.

10) Action GET operations in the packet scheduler can erroneously bump
    the reference count of the entry, making it unreleasable. Fix from
    Jamal Hadi Salim. Jamal gives a great set of example command lines
    that trigger this in the commit message.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  net sched actions: fix refcnt when GETing of action after bind
  net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
  net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
  net/mlx4_core: Fix racy CQ (Completion Queue) free
  net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
  net/mlx5e: Fix a -Wmaybe-uninitialized warning
  ax25: Fix segfault after sock connection timeout
  bpf: rework prog_digest into prog_tag
  tipc: allocate user memory with GFP_KERNEL flag
  net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
  ip6_tunnel: Account for tunnel header in tunnel MTU
  mld: do not remove mld souce list info when set link down
  be2net: fix MAC addr setting on privileged BE3 VFs
  be2net: don't delete MAC on close on unprivileged BE3 VFs
  be2net: fix status check in be_cmd_pmac_add()
  cpmac: remove hopeless #warning
  ravb: do not use zero-length alignment DMA descriptor
  mlx4: do not call napi_schedule() without care
  openvswitch: maintain correct checksum state in conntrack actions
  tcp: fix tcp_fastopen unaligned access complaints on sparc
  ...

Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb fix from Konrad Rzeszutek Wilk:
 "A tiny fix to make sure that page-sized mappings are page-aligned (and
  not say straddle two pages). This is important for some drivers (such
  as NVME)"

* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: ensure that page-sized mappings are page-aligned

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - fix regressions detecting HS/HS DDR eMMC cards related to CMD6

  MMC host:
   - mmc: mxs-mmc: Fix additional cycles after transmission stop
   - sdhci-acpi: Only powered up enabled acpi child devices
   - meson: avoid possible NULL dereference"

* tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
  mmc: mxs-mmc: Fix additional cycles after transmission stop
  mmc: sdhci-acpi: Only powered up enabled acpi child devices
  MMC: meson: avoid possible NULL dereference

Pull MTD fixes from Brian Norris:
 "Just NAND updates from Boris:

   - avoid compiling xway NAND controller driver as a module (which
     didn't work)

   - fix tango NAND DT binding and make sure the controller is in a
     clean state at probe time

   - add dependency on HAS_IOMEM to the oxnas NAND driver

   - fix irq number validity check in the lpc32xx driver"

* tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd:
  mtd: nand: lpc32xx: fix invalid error handling of a requested irq
  mtd: nand: tango: Reset pbus to raw mode in probe
  mtd: nand: tango: Update DT binding description
  mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
  mtd: nand: xway: fix build because of module functions
  mtd: nand: xway: disable module support

Merge tag 'perf-urgent-for-mingo-4.10-20170117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com>

  - Show correct locations for 'perf probe' on modules (Masami Hiramatsu)

  - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

When replaying the journal it can happen that a journal entry points to
a garbage collected node.
This is the case when a power-cut occurred between a garbage collect run
and a commit. In such a case nodes have to be read using the failable
read functions to detect whether the found node matches what we expect.

One corner case was forgotten, when the journal contains an entry to
remove an inode all xattrs have to be removed too. UBIFS models xattr
like directory entries, so the TNC code iterates over
all xattrs of the inode and removes them too. This code re-uses the
functions for walking directories and calls ubifs_tnc_next_ent().
ubifs_tnc_next_ent() expects to be used only after the journal and
aborts when a node does not match the expected result. This behavior can
render an UBIFS volume unmountable after a power-cut when xattrs are
used.

Fix this issue by using failable read functions in ubifs_tnc_next_ent()
too when replaying the journal.
Cc: stable@vger.kernel.org
Fixes: 1e51764a ("UBIFS: add new flash file system")
Reported-by: Rock Lee <rockdotlee@gmail.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>

In several places, ubifs checked for an encryption key before creating a
file in an encrypted directory.  This was redundant with
fscrypt_setup_filename() or ubifs_new_inode(), and in the case of
ubifs_link() it broke linking to special files.  So remove the extra
checks.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The ubifs encryption ioctls did not work when called by a 32-bit program
on a 64-bit kernel.  Since 'struct fscrypt_policy' is not affected by
the word size, ubifs just needs to allow these ioctls through, like what
ext4 and f2fs do.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This came up during the v4.10 merge window:

warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK)
fs/crypto/crypto.c: In function 'fscrypt_zeroout_range':
fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
   bio = bio_alloc(GFP_NOWAIT, 1);

The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations
that also enable BLOCK.

Fixes: d475a507 ("ubifs: Add skeleton for fscrypto")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Without this, I get the following on reboot:

UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad target node (type 1) length (8240)
UBIFS error (ubi1:0 pid 703): ubifs_load_znode: have to be in range of 48-4144
UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad indexing node at LEB 13:11080, error 5
 magic          0x6101831
 crc            0xb1cb246f
 node_type      9 (indexing node)
 group_type     0 (no node group)
 sqnum          546
 len            128
 child_cnt      5
 level          0
 Branches:
 0: LEB 14:72088 len 161 key (133, inode)
 1: LEB 14:81120 len 160 key (134, inode)
 2: LEB 20:26624 len 8240 key (134, data, 0)
 3: LEB 14:81280 len 160 key (135, inode)
 4: LEB 20:34864 len 8240 key (135, data, 0)
UBIFS warning (ubi1:0 pid 703): ubifs_ro_mode.part.0: switched to read-only mode, error -22
CPU: 0 PID: 703 Comm: mount Not tainted 4.9.0-next-20161213+ #1197
Hardware name: Atmel SAMA5
[<c010d2ac>] (unwind_backtrace) from [<c010b250>] (show_stack+0x10/0x14)
[<c010b250>] (show_stack) from [<c024df94>] (ubifs_jnl_update+0x2e8/0x614)
[<c024df94>] (ubifs_jnl_update) from [<c0254bf8>] (ubifs_mkdir+0x160/0x204)
[<c0254bf8>] (ubifs_mkdir) from [<c01a6030>] (vfs_mkdir+0xb0/0x104)
[<c01a6030>] (vfs_mkdir) from [<c0286070>] (ovl_create_real+0x118/0x248)
[<c0286070>] (ovl_create_real) from [<c0283ed4>] (ovl_fill_super+0x994/0xaf4)
[<c0283ed4>] (ovl_fill_super) from [<c019c394>] (mount_nodev+0x44/0x9c)
[<c019c394>] (mount_nodev) from [<c019c4ac>] (mount_fs+0x14/0xa4)
[<c019c4ac>] (mount_fs) from [<c01b5338>] (vfs_kern_mount+0x4c/0xd4)
[<c01b5338>] (vfs_kern_mount) from [<c01b6b80>] (do_mount+0x154/0xac8)
[<c01b6b80>] (do_mount) from [<c01b782c>] (SyS_mount+0x74/0x9c)
[<c01b782c>] (SyS_mount) from [<c0107f80>] (ret_fast_syscall+0x0/0x3c)
UBIFS error (ubi1:0 pid 703): ubifs_mkdir: cannot create directory, error -22
overlayfs: failed to create directory /mnt/ovl/work/work (errno: 22); mounting read-only

Fixes: 7799953b ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: Peter Rosin <peda@axentia.se>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

err is no longer being set on a successful return path, causing
a garbage value being returned. Fix this by setting err to zero
for the successful return path.

Found with static analysis by CoverityScan, CID 1389473

Fixes: 7799953b ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The CPU hotplug function intel_pmu_cpu_starting() sets
cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive
counters data structure is already availabe for the sibling thread.

This works during the boot process because the first sibling gets threadid
0 assigned and the second sibling which shares the data structure gets 1.

But when the first thread of the core is offlined and onlined again it
shares the data structure with the second thread and gets exclusive thread
id 1 assigned as well.

Prevent this by checking the threadid of the already online thread.

[ tglx: Rewrote changelog ]
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Cc: NuoHan Qiao <qiaonuohan@huawei.com>
Cc: ak@linux.intel.com
Cc: peterz@infradead.org
Cc: kan.liang@intel.com
Cc: dave.hansen@linux.intel.com
Cc: eranian@google.com
Cc: qiaonuohan@huawei.com
Cc: davidcc@google.com
Cc: guohanjun@huawei.com
Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
---					---
 arch/x86/events/intel/core.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

When a CPU goes offline a potentially pending timer interrupt is not
cleared. When the CPU comes online again then the pending interrupt is
delivered before the per cpu clockevent device is initialized. As a
consequence the tick interrupt handler dereferences a NULL pointer.

[   51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040
[   51.289348] task: ee942d00 task.stack: ee960000
[   51.293861] PC is at tick_periodic+0x38/0xb0
[   51.298102] LR is at tick_handle_periodic+0x1c/0x90

Clear the pending interrupt in the cpu dying path.

Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: cw00.choi@samsung.com
Cc: daniel.lezcano@linaro.org
Cc: stable@vger.kernel.org
Cc: javier@osg.samsung.com
Cc: kgene@kernel.org
Cc: krzk@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Demonstrating the issue:

.. add a drop action
$sudo $TC actions add action drop index 10

.. retrieve it
$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 2 bind 0 installed 29 sec used 29 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

... bug 1 above: reference is two.
    Reference is actually 1 but we forget to subtract 1.

... do a GET again and we see the same issue
    try a few times and nothing changes
~$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 2 bind 0 installed 31 sec used 31 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

... lets try to bind the action to a filter..
$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
  u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10

... and now a few GETs:
$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 3 bind 1 installed 204 sec used 204 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 4 bind 1 installed 206 sec used 206 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 5 bind 1 installed 235 sec used 235 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

.... as can be observed the reference count keeps going up.

After the fix

$ sudo $TC actions add action drop index 10
$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 1 bind 0 installed 4 sec used 4 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 1 bind 0 installed 6 sec used 6 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
  u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10

$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 2 bind 1 installed 32 sec used 32 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

$ sudo $TC -s actions get action gact index 10

	action order 1: gact action drop
	 random type none pass val 0
	 index 10 ref 2 bind 1 installed 33 sec used 33 sec
 	Action statistics:
	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
	backlog 0b 0p requeues 0

Fixes: aecc5cef ("net sched actions: fix GETing actions")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull NFS client bugfixes from Trond Myklebust:

 - fix invalid fget()/fput() calls when doing file locking

 - fix multiple directory cache invalidation issues due to the client
   failing to recognise that the directory wasn't changed

 - fix client recovery when server reboots multiple times

* tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix client recovery when server reboots multiple times
  NFSv4: update_changeattr should update the attribute timestamp
  NFSv4: Don't call update_changeattr() unless the unlink is successful
  NFSv4: Don't apply change_info4 twice on rename within a directory
  NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created
  nfs: Don't take a reference on fl->fl_file for LOCK operation