- 13 Oct, 2023 3 commits
-
-
Thomas Zimmermann authored
The plane's atomic_check returns -EINVAL if the CRTC has not been set. This is the case for disabled planes, for which atomic_check should return 0. For disabled planes, it also omits the mandatory call to drm_atomic_helper_check_plane_state(). Replace the test with the boiler-plate code that first invokes drm_atomic_helper_check_plane_state() and then tests for the plane to be visible. Return early for non-visible planes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Fixes: d51f9fbd ("drm/ssd130x: Store the HW buffer in the driver-private CRTC state") Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Tested-by:
-
Ian Ray authored
Replace Martin, who has left GE. Signed-off-by:
Ian Ray <ian.ray@ge.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Ian Ray authored
Migrate away from custom EDID parsing and validity checks. Note: This is a follow-up to the original RFC by Jani [1]. The first submission in this series should have been marked v2. [1] https://patchwork.freedesktop.org/patch/msgid/20230901102400.552254-1-jani.nikula@intel.comCo-developed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 12 Oct, 2023 7 commits
-
-
Jacek Lawrynowicz authored
Use: - ivpu_bo_vaddr(bo) instead of bo->kvaddr - ivpu_bo_size(bo) instead of bo->base.size This is a preparation for switch to a drm_gem_shmem_object as a base for ivpu_bo, where: - bo->kvaddr becomes bo->base.vaddr - bo->base.size becomes bo->base.base.size Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of the code. Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Thierry Reding authored
We need to check if a link is non-NULL before trying to delete it. Fixes: 61df9ca2 ("drm/simpledrm: Add support for multiple "power-domains"") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Randy Dunlap authored
Correct spelling of "beginning". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Carlos Eduardo Gallo Filho authored
The functions drm_framebuffer_plane_{width,height} and fb_plane_{width,height} do exactly the same job of its equivalents drm_format_info_plane_{width,height} from drm_fourcc. The only reason to have these functions on drm_framebuffer would be if they would added a abstraction layer to call it just passing a drm_framebuffer pointer and the desired plane index, which is not the case, where these functions actually implements just part of it. In the actual implementation, every call to both drm_framebuffer_plane_{width,height} and fb_plane_{width,height} should pass some drm_framebuffer attribute, which is the same as calling the drm_format_info_plane_{width,height} functions. The drm_format_info_pane_{width,height} functions are much more consistent in both its implementation and its location on code. The kind of calculation that they do is intrinsically derivated from the drm_format_info struct and has not to do with drm_framebuffer, except by the potential motivation described above, which is still not a good justification to have drm_framebuffer functions to calculate it. So, replace each drm_framebuffer_plane_{width,height} and fb_plane_{width,height} call to drm_format_info_plane_{width,height} and remove them. Signed-off-by:Carlos Eduardo Gallo Filho <gcarlos@disroot.org> Reviewed-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
-
Carlos Eduardo Gallo Filho authored
The drm_format_info_plane_{height,width} functions was implemented using regular division for the plane size calculation, which cause issues [1][2] when used on contexts where the dimensions are misaligned with relation to the subsampling factors. So, replace the regular division by the DIV_ROUND_UP macro. This allows these functions to be used in more drivers, making further work to bring more core presence on them possible. [1] http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-3-ville.syrjala@linux.intel.com [2] https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.comSigned-off-by: -
Thomas Zimmermann authored
Rename the fbdev mmap helper fb_pgprotect() to pgprot_framebuffer(). The helper sets VMA page-access flags for framebuffers in device I/O memory. Also clean up the helper's parameters and return value. Instead of the VMA instance, pass the individial parameters separately: existing page-access flags, the VMAs start and end addresses and the offset in the underlying device memory rsp file. Return the new page-access flags. These changes align pgprot_framebuffer() with other pgprot_() functions. v4: * fix commit message (Christophe) v3: * rename fb_pgprotect() to pgprot_framebuffer() (Arnd) Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Reviewed-by:
-
Thomas Zimmermann authored
Only PowerPC's fb_pgprotect() needs the file argument, although the implementation in either phys_mem_access_prot() or pci_phys_mem_access_prot() does not use it. Pass NULL to the internal helper in preparation of further updates. A later patch will remove the file parameter from fb_pgprotect(). While at it, replace the shift operation with PHYS_PFN(). v5: * state function names in commit description (Javier) Suggested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
- 11 Oct, 2023 14 commits
-
-
Thierry Reding authored
It's confusing for a function to return NULL and ERR_PTR()-encoded error codes on failure. Make sure we only ever return the latter since that's what callers already expect. Reported-by:
Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by:
-
Mikko Perttunen authored
UBSAN reports an invalid load for bool, as the iosys_map is read later without being initialized. Zero-initialize it to avoid this. Reported-by:
Ashish Mhetre <amhetre@nvidia.com> Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by:
-
Johnny Liu authored
Original implementation over allocates the memory size for the contexts list. The size of memory for the contexts list is based on the number of iommu groups specified in the device tree. Fixes: 8aa5bcb6 ("gpu: host1x: Add context device management code") Signed-off-by:
Johnny Liu <johnliu@nvidia.com> Signed-off-by:
-
Mikko Perttunen authored
Support sharded syncpoint interrupts on Tegra234+. This feature allows specifying one of eight interrupt lines for each syncpoint to lower processing latency of syncpoint threshold interrupts. Signed-off-by:
-
Mikko Perttunen authored
With the previous CDMA stop fix, executing runtime PM ops around system suspend now makes channel submissions work after system suspend, so do that. Signed-off-by:
-
Mikko Perttunen authored
Before going into suspend, wait all CDMA to go idle and stop it. This will ensure no channel is still active while we enter suspend, and ensures the driver doesn't think that CDMA is still active when coming back from suspend (as HW state has been reset). Signed-off-by:
-
Mikko Perttunen authored
Add locking around channel allocation to avoid race conditions. Signed-off-by:
-
Lee Jones authored
When converting from int to string, we must allow for up to 10-chars (2147483647). Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/tegra/hub.c: In function ‘tegra_display_hub_probe’: drivers/gpu/drm/tegra/hub.c:1106:47: warning: ‘%u’ directive output may be truncated writing between 1 and 10 bytes into a region of size 4 [-Wformat-truncation=] drivers/gpu/drm/tegra/hub.c:1106:42: note: directive argument in the range [0, 4294967294] drivers/gpu/drm/tegra/hub.c:1106:17: note: ‘snprintf’ output between 6 and 15 bytes into a destination of size 8 Signed-off-by:
Lee Jones <lee@kernel.org> Signed-off-by:
-
Yue Haibing authored
Commit 776dc384 ("drm/tegra: Move subdevice infrastructure to host1x") removed the implementation but not the declaration. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Signed-off-by:
-
Sui Jingfeng authored
else is not generally useful after return Signed-off-by:
-
Dmitry Baryshkov authored
Implement the oob_hotplug_event() callback. Translate it to the HPD notification sent to the HPD bridge in the chain. Reviewed-by:
Janne Grunau <j@jannau.net> Link: https://lore.kernel.org/r/20231009174048.2695981-4-dmitry.baryshkov@linaro.orgSigned-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-4-dmitry.baryshkov@linaro.org
-
Dmitry Baryshkov authored
In some cases the bridge drivers would like to receive hotplug events even in the case new status is equal to the old status. In the DP case this is used to deliver "attention" messages to the DP host. Stop filtering the events in the drm_bridge_connector_hpd_cb() and let drivers decide whether they would like to receive the event or not. Reviewed-by:
-
Bjorn Andersson authored
In some implementations, such as the Qualcomm platforms, the display driver has no way to query the current HPD state and as such it's impossible to distinguish between disconnect and attention events. Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD state. Also push the test for unchanged state in the displayport altmode driver into the i915 driver, to allow other drivers to act upon each update. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Thomas Zimmermann authored
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by:
-
- 10 Oct, 2023 5 commits
-
-
Klaus Goger authored
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220131164723.714836-2-quentin.schulz@theobroma-systems.com
-
Quentin Schulz authored
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Quentin Schulz authored
To prepare for a new display to be supported by this driver which has a slightly different set of DSI mode related flags, let's move the currently hardcoded mode flags to the .data field of of_device_id structure. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by:
-
Ma Ke authored
In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by:
Ma Ke <make_ruc2021@163.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231009090446.4043798-1-make_ruc2021@163.comSigned-off-by:
-
Ma Ke authored
In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Signed-off-by:
-
- 09 Oct, 2023 11 commits
-
-
Yang Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Zhu Wang authored
The driver depends on CONFIG_OF, so it is not necessary to use of_match_ptr here. Even for drivers that do not depend on CONFIG_OF, it's almost always better to leave out the of_match_ptr(), since the only thing it can possibly do is to save a few bytes of .text if a driver can be used both with and without it. Hence we remove of_match_ptr. Signed-off-by:
Zhu Wang <wangzhu9@huawei.com> Signed-off-by:
-
Christophe JAILLET authored
cdn_dp_audio_codec_init() can fail. So add some error handling. If component_add() fails, the previous cdn_dp_audio_codec_init() call should be undone, as already done in the remove function. Fixes: 88582f56 ("drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Mark Brown authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Michael Tretter authored
Checking if a modifier is supported by a plane is normal behavior. It is normal that a plane may not support certain modifiers. Failing the check doesn't justify an error message in the kernel log and may mislead users. Demote the error message to drm_dbg_kms to only print the message if the respective debug messages are enabled. This is similar to the behavior in rockchip_drm_vop.c. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Adrián Larumbe authored
Fix issues revealed by `make htmldocs` after adding Panfrost DRM documentation file. Signed-off-by:
Adrián Larumbe <adrian.larumbe@collabora.com> Fixes: f11b0417 ("drm/panfrost: Add fdinfo support GPU load metrics") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310030917.Txzlpoeq-lkp@intel.comReviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231005141239.132783-1-adrian.larumbe@collabora.com
-
Johannes Zink authored
Some panels support multiple LVDS data mapping formats, which can be used e.g. run displays on jeida-18 format when only 3 LVDS lanes are available. Add parsing of an optional data-mapping devicetree property, which also touches up the bits per color to match the bus format. Signed-off-by:
Johannes Zink <j.zink@pengutronix.de> Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-3-0d7928edafab@pengutronix.deSigned-off-by:
-
Johannes Zink authored
Some Displays support more than just a single default LVDS data mapping, which can be used to run displays on only 3 LVDS lanes in the jeida-18 data-mapping mode. Add an optional data-mapping property to allow overriding the default data mapping. As it does not generally apply to any display and bus, use it selectively on the innolux,g101ice-l01, which supports changing the data mapping via a strapping pin. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Johannes Zink authored
As the LVDS data-mapping property is required in multiple bindings: move it to separate file and include instead of duplicating it. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Michael Tretter authored
Calculating the byte_clk in kHz is imprecise for a hs_clock of 55687500 Hz, which may be used with a pixel clock of 74.25 MHz with mode 1920x1080-30. Fix the calculation by using HZ instead of kHZ. This requires to change the type to u64 to prevent overflows of the integer type. Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E) Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.deSigned-off-by:
-
Michael Tretter authored
Rounding the porches up instead of down fixes the samsung-dsim at some more resolutions and refresh rates: The following resolutions are working with rounded-up porches, but don't work when the porches are rounded down: 1920x1080-59.94 1920x1080-30.00 1920x1080-29.97 1920x1080-25.00 1680x1050-59.88 1280x1024-75.02 1200x960-59.99 1280x720-50.00 1024x768-75.03 1024x768-60.00 640x480-60.00 640x480-59.94 Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E) Reviewed-by:
-
