For Broadwell, there is one instance of Transcoder MN values per transcoder.
For dynamic switching between multiple refreshr rates, M/N values may be
reprogrammed on the fly. Link N programming triggers update of all data and
link M & N registers and the new M/N values will be used in the next frame
that is output.

V2: [By Ram]: intel_dp_set_m_n() is rewritten to accommodate
	gen >= 8 [Rodrigo]
V3: Coding style correction [Ram]
V4: [By Ram] intel_dp_set_m_n modifications are moved into a
	separate patch, retaining only DRRS related changes here [Rodrigo]
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Till Gen 7 we have two sets of M_N registers, but Gen 8 onwards
we have only one M_N register set. To support DRRS on both scenarios
a input parameter to intel_dp_set_m_n is added.

In case of DRRS, When platform provides two set of M_N registers for dp,
we can program them with two different dividers and switch between them.
But when only one such register set is provided, we have to program
the required divider M_N value on that registers itself.

Two enum members M1_N1 and M2_N2 are defined to represent the above
scenarios.

M1_N1        :	Program dp_m_n on M1_N1 registers
			dp_m2_n2 on M2_N2 registers (If supported)

M2_N2        :	Program dp_m2_n2 on M1_N1 registers
			M2_N2 registers are not supported
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

As of Gen6, the general purpose area of the hardware status page has shrunk and
now begins at dword 0x30.  i915 driver uses dword 0x20 to store the seqno which
is now reserved.  So shift our HWSP dwords up into the general purpose range
before this bites us.

Note that all available documentation just says this is reserved
without going into details about what it's used for.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Add clarification from Thomas that unfortunately Bspec is
silent on what "reserverd" precisely means.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Work was getting left behind in LRC contexts during reset.  This causes a hang
if the GPU is reset when HEAD==TAIL because the context's ringbuffer head and
tail don't get reset and retiring a request doesn't alter them, so the ring
still appears full.

Added a function intel_lr_context_reset() to reset head and tail on a LRC and
its ringbuffer.

Call intel_lr_context_reset() for each context in i915_gem_context_reset() when
in execlists mode.

Testcase: igt/pm_rps --run-subtest reset #bdw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Flatten control flow in the lrc reset code a notch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

When one EU is disabled in a particular subslice, we can tune how the
work is spread between subslices to improve EU utilization.

v2: - Use a bitfield to record which subslice(s) has(have) 7 EUs. That
      will also make the machinery work if several sublices have 7 EUs.
      (Jeff Mcgee)
    - Only apply the different hashing algorithm if the slice is
      effectively unbalanced by checking there's a single subslice with
      7 EUs. (Jeff Mcgee)

v3: Fix typo in comment (Jeff Mcgee)

Issue: VIZ-3845
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Reviewed-by: Jeff Mcgee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

With the current code we just reallocate the compressed FB at every
FBC update: we have X in one frame, then in the other frame we need X
again, but we check "needed < have" instead of "needed <= have".

v2: Rebase after Jani addressed the other problems described in v1.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So allow it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So add code to consider this case.

v2: Reorder the series, so drop the possible_framebuffer_bits chunk.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

I want to make this code a little more complicated, so let's extract
the function first.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

On Gen9 the render power gating can leave slice/subslice/EU in
a partially enabled state. We must make an explicit request for
full SSEU enablement through the Render Power Clock State
register when resuming render work. This register is save/
restored in the logical ring context image for execlist
submission mode. Initialize its value in each LRC image to
request full enablement according to the device SSEU config.

Thanks to Sharma Ankitprasad and Akash Goel for highlighting the
issue and proposing the initial fix on which this patch is based.

v2: Adjusted the names of the power gating support flags to fit
    update of an earlier patch.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: "Akash Goel <akash.goel@intel.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Add a new section to the 'i915_sseu_status' debugfs entry to
report the currently enabled counts of slice, subslice, and
execution units on the device. The count of enabled subslice
per slice represents the most enabled subslice on any one
slice for devices where imbalances may exist. Similarly, the
count of enabled EU per subslice represents the most enabled
EU on any one subslice.

Collect this device status for Skylake by reading the Gen9
power gate control ack message registers. Power gate control
operates on EU in pairs, therefore our reported counts of
enabled EU can be overestimated by one for each pair in which
one EU is fused-off.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.

v2: Several small clean-ups suggested by Damien. Most notably,
    used smaller types for the new device info fields to reduce
    memory usage and improved the clarity/readability of the
    method used to extract attribute values from the fuse
    registers.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Added new PHY register definitions to control TDC buffer calibration and
digital lock threshold.
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Currently, the command parser tries to create a secondary batch exactly
as large as the original, and vmap both. This is open to abuse by
userspace using extremely large batch objects, but only executing very
short batches. For example, this would be if userspace were to implement
a command submission ringbuffer. However, we only need to allocate pages
for just the contents of the command sequence in the batch - all
relocations copied to the secondary batch will reference the original
batch and so there can be no access to the secondary batch outside of
the explicit execution region.

Testcase: igt/gem_exec_big #ivb,byt,hsw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

When querying the GTFIFOCTL register to check the FIFO space, the read value
must be masked. The operation is repeated explicitly in several places. This
change refactors the read-and-mask code into a function call.

v2: rebased on top of Mika's forcewake patch set, specifically:
	[PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers

Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

KMS drivers are in full control of their irq and vblank handling, if
they get a vblank interrupt before drm_vblank_init or after
drm_vblank_cleanup that's just a driver bug.

For ums driver there's only r128 and radeon which support vblank, and
they call drm_vblank_init in their driver load functions. Which again
means that userspace can do whatever it wants with interrupt, vblank
structures will always be there.

So this should never happen, let's catch driver issues with a WARN_ON.
Motivated by some discussions with Imre.

v2: Use WARN_ON_ONCE as suggested by Imre.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

The pipe might already have been shut down, and then it's not a good
idea to call hw accessor functions. Instead use the same logic as
drm_vblank_off which has all the necessary checks to avoid troubles or
inconsistency.

Noticed by Imre while reviewing my patches to remove some sanity
checks from ->get_vblank_counter.

v2: Try harder. disable_and_save can still access the vblank stuff
when vblank->enabled isn't set. It has to, since vlbank irq could be
disable but the pipe is still on when being called from
drm_vblank_off. But we still want to use that code for more code
sharing. So add a check for vblank->enabled on top - if that's not set
we shouldn't have anyone waiting for the vblank. If we have that's a
pretty serious bug.

The other issue that Imre spotted is drm_vblank_cleanup. That code
again calls disable_and_save and so suffers from the same issues. But
really drm_irq_uninstall should have cleaned that all up, so replace
the code with WARN_ON. Note that we can't delete the timer cleanup
since drivers aren't required to use drm_irq_install/uninstall, but
can do their own irq handling.

v3: Make it clear that all that gunk in drm_irq_uninstall is really
just bandaids for UMS races between the irq/vblank code. In UMS
userspace is in control of enabling/disabling interrupts in general
and vblanks specifically.

v4: Imre observed that KMS drivers all call drm_vblank_cleanup before
drm_irq_uninstall (as they should), so again the code in there is dead
for KMS (due to dev->num_crtcs == 0 after drm_vblank_cleanup). Or
should be, so only WARN for KMS - with UMS userspace could try to do
evil things.

v5: After more discussion on irc we've gone back to v3: the
del_timer_sync is required in all cases in drm_vblank_cleanup, but
let's restrict the WARN_ON to kms drivers only. Imre was also
concerned that bad things could happen without the disable_and_save
call. But we immediately free vblank structures afterwards which makes
the save useless. And drm_handle_vblank has a check for dev->num_crtcs
to avoid surprises with ums.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Where possible right now. Just a small step towards nirvana ...

v2: git add. Uggh. Noticed by Imre.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

UMS is no more!

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

With Ville's rework to use drm_crtc_vblank_on/off the core will take
care of rejecting drm_vblank_get calls when the pipe is off. Also the
core won't call the get_vblank_counter hooks in that case either. And
since we've dropped ums support recently we can now remove these
hacks, yay!

Noticed while trying to answer questions Laurent had about how the new
atomic helpers work.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.

Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
  unitialized.

The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).

So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.

v2: Clarify the code flow slightly as suggested by Ville.

v3: Fix kerneldoc spelling, spotted by Laurent.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Commit 03dae59c ("drm/i915: Ditch UMS config option") removed
CONFIG_DRM_I915_UMS from the Kconfig file, but i915_drv.c still
references this option in two #ifndef statements.

As an undefined config option will always be 'false', we can drop
the #ifndefs alltogether and adapt the printed error message.

This inconsistency was found with the undertaker tool.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
[danvet: Undo logging change as requested by Jani.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

I have no idea how that crept in, but we need to do the write from the
ring and this is a masked register. Two fixes in 1!

Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

It's always a good idea to keep static analysis happy (also because it
prompts doing the check like I proposed :), this time smatch complains:

drivers/gpu/drm/i915/intel_ringbuffer.c:891 gen9_init_workarounds() warn:
  always true condition '((->dev->pdev->revision) >= (0)) => (0-255 >= 0)'

That's because revision is a u8. Tweak a bit the condition then.

Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This W/A is put in a gen9 specific function because it may well be
needed on other gen9 platforms.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We use the pid of the process which opened our device when
we track which was the culprit of the gpu hang. But as that
file descriptor might get inherited, we might blame the
wrong process when we record the error state.

Track process identifiers in requests to always find
the correct offender.

v2: Track only user processes (Chris)

Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: drop NULL check before put_pid as suggested by Chris.]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This function will host SKL-only W/As.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Let's also take the opportunity the remove the comment telling it's a
pre-prod W/A, it should be obvious from the stepping test.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We'll gather cross-gen9 W/A in a separate function later.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>