- 13 Apr, 2012 20 commits
-
-
Wolfgang Mauerer authored
commit 01de982a upstream. 8 hex characters tell only half the tale for 64 bit CPUs, so use the appropriate length. Link: http://lkml.kernel.org/r/1332411501-8059-2-git-send-email-wolfgang.mauerer@siemens.comSigned-off-by:
Wolfgang Mauerer <wolfgang.mauerer@siemens.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiang Liu authored
commit f5cb92ac upstream. irq_move_masked_irq() checks the return code of chip->irq_set_affinity() only for 0, but IRQ_SET_MASK_OK_NOCOPY is also a valid return code, which is there to avoid a redundant copy of the cpumask. But in case of IRQ_SET_MASK_OK_NOCOPY we not only avoid the redundant copy, we also fail to adjust the thread affinity of an eventually threaded interrupt handler. Handle IRQ_SET_MASK_OK (==0) and IRQ_SET_MASK_OK_NOCOPY(==1) return values correctly by checking the valid return values seperately. Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Keping Chen <chenkeping@huawei.com> Link: http://lkml.kernel.org/r/1333120296-13563-2-git-send-email-jiang.liu@huawei.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jan Beulich authored
commit 9aaf440f upstream. This was lacking a comma between two supposed to be separate strings. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Julian Anastasov authored
commit 3e80acd1 upstream. commit 64b3db22 (2.6.39), "Remove use of unreliable FADT revision field" causes regression for old P4 systems because now cst_control and other fields are not reset to 0. The effect is that acpi_processor_power_init will notice cst_control != 0 and a write to CST_CNT register is performed that should not happen. As result, the system oopses after the "No _CST, giving up" message, sometimes in acpi_ns_internalize_name, sometimes in acpi_ns_get_type, usually at random places. May be during migration to CPU 1 in acpi_processor_get_throttling. Every one of these settings help to avoid this problem: - acpi=off - processor.nocst=1 - maxcpus=1 The fix is to update acpi_gbl_FADT.header.length after the original value is used to check for old revisions. https://bugzilla.kernel.org/show_bug.cgi?id=42700 https://bugzilla.redhat.com/show_bug.cgi?id=727865Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
Yinghai Lu authored
commit 89e96ada upstream. During testing pci root bus removal, found some root bus bridge is not freed. If booting with pnpacpi=off, those hostbridge could be freed without problem. It turns out that some devices reference are not released during acpi_pnp_match. that match should not hold one device ref during every calling. Add pu_device calling before returning. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Andi Kleen authored
commit 2815ab92 upstream. On Intel CPUs the processor typically uses the highest frequency set by any logical CPU. When the system overheats Linux first forces the frequency to the lowest available one to lower the temperature. However this was done only per logical CPU, which means all logical CPUs in a package would need to go through this before the frequency is actually lowered. Worse this delay actually prevents real throttling, because the real throttle code only proceeds when the lowest frequency is already reached. So when a throttle event happens force the lowest frequency for all CPUs in the package where it happened. The per CPU state is now kept per package, not per logical CPU. An alternative would be to do it per cpufreq unit, but since we want to bring down the temperature of the complete chip it's better to do it for all. In principle it may even make sense to do it for all CPUs, but I kept it on the package for now. With this change the frequency is actually lowered, which in terms also allows real throttling to proceed. I also removed an unnecessary per cpu variable initialization. v2: Fix package mapping Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Brian Norris authored
commit b54f47c8 upstream. Using UBI on m25p80 can give messages like: UBI error: io_init: bad write buffer size 0 for 1 min. I/O unit We need to initialize writebufsize; I think "page_size" is the correct "bufsize", although I'm not sure. Comments? Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Artem Bityutskiy authored
commit fcc44a07 upstream. The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to 4 because this drivers writes at max 4 bytes at a time. Signed-off-by:
-
Artem Bityutskiy authored
commit b6043874 upstream. The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. However, we forgot to set this parameter for block2mtd. Set it to PAGE_SIZE because this is actually the amount of data we write at a time. Signed-off-by:
Joern Engel <joern@lazybastard.org> Signed-off-by:
-
Artem Bityutskiy authored
commit c4cc625e upstream. The writebufsize concept was introduce by commit "0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. Set writebufsize to the flash page size because it is the maximum amount of data it writes at a time. Signed-off-by:
-
Wolfram Sang authored
commit 5289966e upstream. This has been moved from .options to .bbt_options meanwhile. So, it currently checks for something totally different (NAND_OWN_BUFFERS) and decides according to that. Artem Bityutskiy: the options were moved in a40f7341 mtd: nand: consolidate redundant flash-based BBT flags Artem Bityutskiy: CCing -stable Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
-
Daniel Schwierzeck authored
commit bf011f2e upstream. Since commit ca97dec2 the command line parsing of MTD partitions does not work anymore. Signed-off-by:
Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit a3c1e3b7 upstream. In commit "c7975330 mtd: abstract last MTD partition parser argument" the third argument of "mtd_device_parse_register()" changed from start address of the MTD device to a pointer to a struct. The "ixp4xx_flash_probe()" function was not converted properly, causing an oops during boot. This patch fixes the problem by filling the needed information into a "struct mtd_part_parser_data" and passing it to "mtd_device_parse_register()". Signed-off-by:
Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by:
-
Mark Brown authored
commit e1660585 upstream. Based on latest production information. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Kenth Eriksson authored
[ Upstream commit 464b57da ] The merge done in commit b26e478f undid bug fix in commit c3e072f8 ("net: fsl_pq_mdio: fix non tbi phy access"), with the result that non TBI (e.g. MDIO) PHYs cannot be accessed. Signed-off-by:
Kenth Eriksson <kenth.eriksson@transmode.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 78fb72f7 ] Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
-
danborkmann@iogearbox.net authored
[ Upstream commit 81213b5e ] If both addresses equal, nothing needs to be done. If the device is down, then we simply copy the new address to dev->dev_addr. If the device is up, then we add another loopback device with the new address, and if that does not fail, we remove the loopback device with the old address. And only then, we update the dev->dev_addr. Signed-off-by:
Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by:
-
Lino Sanfilippo authored
[ Upstream commit 2240eb4a ] This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by:
Stephen Hemminger <shemminger@vyattta.com> Signed-off-by:
-
Matt Carlson authored
[ Upstream commit 085f1afc ] If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
zhuangfeiran@ict.ac.cn authored
[ Upstream commit 1d24fb36 ] When K >= 0xFFFF0000, AND needs the two least significant bytes of K as its operand, but EMIT2() gives it the least significant byte of K and 0x2. EMIT() should be used here to replace EMIT2(). Signed-off-by:
Feiran Zhuang <zhuangfeiran@ict.ac.cn> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- 02 Apr, 2012 20 commits
-
-
Greg Kroah-Hartman authored
-
Matthew Garrett authored
commit c9651e70 upstream. Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16 ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by:
Matthew Garrett <mjg@redhat.com> Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yoshii Takashi authored
commit 49d4bcad upstream. When DMA is enabled, sh-sci transfer begins with uart_start() sci_start_tx() if (cookie_tx < 0) schedule_work() Then, starts DMA when wq scheduled, -- (A) process_one_work() work_fn_rx() cookie_tx = desc->submit_tx() And finishes when DMA transfer ends, -- (B) sci_dma_tx_complete() async_tx_ack() cookie_tx = -EINVAL (possible another schedule_work()) This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash. To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work(). But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx(). This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start(). Another gap between async_tx_ack() and another schedule_work() results in the same issue, too. This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps. Signed-off-by:
Takashi Yoshii <takashi.yoshii.zj@renesas.com> Reviewed-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Dan Carpenter authored
commit 6d8d1749 upstream. There is no point in passing a zero length string here and quite a few of that cache_parse() implementations will Oops if count is zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
John Stultz authored
commit 4a649903 upstream. Richard Weinberger noticed that on some RTC hardware that doesn't support UIE mode, due to coarse granular alarms (like 1minute resolution), the current virtualized RTC support doesn't properly error out when UIE is enabled. Instead the current code queues an alarm for the next second, but it won't fire until up to a miniute later. This patch provides a generic way to flag this sort of hardware and fixes the issue on the mpc5121 where Richard noticed the problem. Reported-by:
Richard Weinberger <richard@nod.at> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Chris Metcalf authored
commit 1631fcea upstream. <asm-generic/unistd.h> was set up to use sys_sendfile() for the 32-bit compat API instead of sys_sendfile64(), but in fact the right thing to do is to use sys_sendfile64() in all cases. The 32-bit sendfile64() API in glibc uses the sendfile64 syscall, so it has to be capable of doing full 64-bit operations. But the sys_sendfile() kernel implementation has a MAX_NON_LFS test in it which explicitly limits the offset to 2^32. So, we need to use the sys_sendfile64() implementation in the kernel for this case. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Dan Carpenter authored
commit 8f0750f1 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Alok Kataria authored
commit 57779dc2 upstream. While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it. So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm. We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods. Signed-off-by:
Alok N Kataria <akataria@vmware.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Alan Cox <alan@linux.intel.com> [jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later] Signed-off-by:
-
NeilBrown authored
commit de5b8e8e upstream. If you try to set grace_period or timeout via a module parameter to lockd, and do this on a big-endian machine where sizeof(int) != sizeof(unsigned long) it won't work. This number given will be effectively shifted right by the difference in those two sizes. So cast kp->arg properly to get correct result. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 1265fd61 ] We call the wrong replay notify function when we use ESN replay handling. This leads to the fact that we don't send notifications if we use ESN. Fix this by calling the registered callbacks instead of xfrm_replay_notify(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
stephen hemminger authored
[ Upstream commit 5676cc7b ] Some BIOS's don't setup power management correctly (what else is new) and don't allow use of PCI Express power control. Add a special exception module parameter to allow working around this issue. Based on slightly different patch by Knut Petersen. Reported-by:
Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit a6506e14 ] no socket layer outputs a message for this error and neither should rds. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2a2a459e ] napi->skb is allocated in napi_get_frags() using netdev_alloc_skb_ip_align(), with a reserve of NET_SKB_PAD + NET_IP_ALIGN bytes. However, when such skb is recycled in napi_reuse_skb(), it ends with a reserve of NET_IP_ALIGN which is suboptimal. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 94f826b8 ] Commit f2c31e32 (net: fix NULL dereferences in check_peer_redir() ) added a regression in rt6_fill_node(), leading to rcu_read_lock() imbalance. Thats because NLA_PUT() can make a jump to nla_put_failure label. Fix this by using nla_put() Many thanks to Ben Greear for his help Reported-by:
Ben Greear <greearb@candelatech.com> Reported-by:
-
Eric Dumazet authored
[ Upstream commit dc72d99d ] Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by:
Matt Evans <matt@ozlabs.org> Reported-by:
Indan Zupancic <indan@nul.nu> Signed-off-by:
-
Gao feng authored
[ Upstream commit 1f85851e ] Since commit 299b0767(ipv6: Fix IPsec slowpath fragmentation problem) In func ip6_append_data,after call skb_put(skb, fraglen + dst_exthdrlen) the skb->len contains dst_exthdrlen,and we don't reduce dst_exthdrlen at last This will make fraggap>0 in next "while cycle",and cause the size of skb incorrent Fix this by reserve headroom for dst_exthdrlen. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
-
Benjamin LaHaise authored
[ Upstream commit bbdb32cb ] While testing L2TP functionality, I came across a bug in getsockname(). The IP address returned within the pppol2tp_addr's addr memember was not being set to the IP address in use. This bug is caused by using inet_sk() on the wrong socket (the L2TP socket rather than the underlying UDP socket), and was likely introduced during the addition of L2TPv3 support. Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Dave Airlie authored
commit 3fa016a0 upstream. Looking at hibernate overwriting I though it looked like a cursor, so I tracked down this missing piece to stop the cursor blink timer. I've no idea if this is sufficient to fix the hibernate problems people are seeing, but please test it. Both radeon and nouveau have done this for a long time. I've run this personally all night hib/resume cycles with no fails. Reviewed-by:
Keith Packard <keithp@keithp.com> Reported-by:
Petr Tesarik <kernel@tesarici.cz> Reported-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reported-by: Lots of misc segfaults after hibernate across the world. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142Tested-by:
Dave Airlie <airlied@redhat.com> Tested-by:
Bojan Smojver <bojan@rexursive.com> Tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Bing Zhao authored
commit fa0fb93f upstream. For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB. Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Sasha Levin authored
commit f946eeb9 upstream. Module size was limited to 64MB, this was legacy limitation due to vmalloc() which was removed a while ago. Limiting module size to 64MB is both pointless and affects real world use cases. Cc: Tim Abbott <tim.abbott@oracle.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
