- 16 Feb, 2017 5 commits
-
-
Rajat Jain authored
The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by:
Rajat Jain <rajatja@google.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Rajat Jain authored
Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by:
-
Rajat Jain authored
Use a label to remove the repetetive cleanup, for error cases. Signed-off-by:
-
Javier Martinez Canillas authored
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias $ After this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias alias: of:N*T*Cqcom,wcnss-btC* alias: of:N*T*Cqcom,wcnss-bt Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Christoph Haag authored
It's a custom USB ID for the broadcom bt adapter in the HTC Vive. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bb4 ProdID=0306 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM2045A0 S: SerialNumber=AC3743E110CE C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) dmesg: Bluetooth: hci0: BCM: chip id 102 Bluetooth: hci0: c-l Bluetooth: hci0: BCM (001.001.005) build 0000 Bluetooth: hci0: BCM (001.001.005) build 0481 Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU Signed-off-by:
Christoph Haag <haagch@frickel.club> Signed-off-by:
-
- 15 Feb, 2017 22 commits
-
-
Jan Koniarik authored
Stop accessing timer struct members directly and use setup_timer and mod_timer helpers intended for that use. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by:
Jan Koniarik <jan.koniarik@trustica.cz> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Chas Williams <3chas3@gmail.com> Cc: <linux-atm-general@lists.sourceforge.net> Cc: <netdev@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Current behaviour of "mirred redirect" action (forward) offload is a bit odd. For matched packets the action forwards them to the desired destination, but it also lets the packet duplicates to go the original way down (bridge, router, etc). That is more like "mirred mirror". Fix this by using PBS type which behaves exactly like "mirred redirect". Note that PBS does not support loopback mode. Fixes: 4cda7d8d ("mlxsw: core: Introduce flexible actions support") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Corentin Labbe says: ==================== stmmac: misc patchs This is a follow up of my previous stmmac serie which address some comment done in v2. ==================== Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
LABBE Corentin authored
It is easier to follow the logic by removing the not operator Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by:
-
LABBE Corentin authored
As suggested by Joe Perches, replacing the "if phydev" logic permit to reduce indentation in the for loop. Signed-off-by:
-
LABBE Corentin authored
The 10/100 case have too many ifcase. This patch split it for removing an if. Signed-off-by:
-
LABBE Corentin authored
This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after the switch in case of valid speed. Signed-off-by:
-
LABBE Corentin authored
In case of invalid speed given, stmmac_adjust_link() still record it as current speed. This patch modify the default case to set speed as SPEED_UNKNOWN if not 10/100/1000. Signed-off-by:
-
LABBE Corentin authored
It is better to use DUPLEX_UNKNOWN instead of just "-1". Using 0 for an invalid speed is bad since 0 is a valid value for speed. So this patch replace 0 by SPEED_UNKNOWN. Signed-off-by:
-
LABBE Corentin authored
The stmmac_adjust_link() function is called too rarely for having likely() macros being useful. Just remove likely annotation in it. Signed-off-by:
-
LABBE Corentin authored
This patch remove some useless parenthesis. Signed-off-by:
-
Christoph Hellwig authored
pci_enable_msix has been long deprecated, but this driver adds a new instance. Convert it to pci_alloc_irq_vectors so that no new instance of the deprecated function reaches mainline. Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Add support for PTP This patch series adds required changes for qed/qede drivers for supporting the IEEE Precision Time Protocol (PTP). Changes from previous versions: v7: Fixed Kbuild robot warnings. v6: Corrected broken loop iteration in previous version. Reduced approximation error of adjfreq. v5: Removed two divisions from the adjust-frequency loop. Resulting logic would use 8 divisions [instead of 24]. v4: Remove the loop iteration for value '0' in the qed_ptp_hw_adjfreq() implementation. v3: Use div_s64 for 64-bit divisions as do_div gives error for signed types. Incorporated review comments from Richard Cochran. - Clear timestamp resgisters as soon as timestamp is read. - Use shift operation in the place of 'divide by 16'. v2: Use do_div for 64-bit divisions. ==================== Acked-by:Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
This patch adds the driver support for, - Registering the ptp clock functionality with the OS. - Timestamping the Rx/Tx PTP packets. - Ethtool callbacks related to PTP. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The patch adds the required qed interfaces for configuring/reading the PTP clock on the adapter. Signed-off-by:
-
Ganesh Goudar authored
Count buffer group drops or truncates as rx drops rather than rx errors in netdev stats. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
Arjun V <arjun@chelsio.com> Signed-off-by:
-
Jarno Rajahalme authored
Commit 91572088 ("net: use core MTU range checking in core net infra") changed the openvswitch internal device to use the core net infra for controlling the MTU range, but failed to actually set the max_mtu as described in the commit message, which now defaults to ETH_DATA_LEN. This patch fixes this by setting max_mtu to ETH_MAX_MTU after ether_setup() call. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Signed-off-by:
-
Jiri Pirko authored
This fixes broken build for !NET_CLS: net/built-in.o: In function `fq_codel_destroy': /home/sab/linux/net-next/net/sched/sch_fq_codel.c:468: undefined reference to `tcf_destroy_chain' Fixes: cf1facda ("sched: move tcf_proto_destroy and tcf_destroy_chain helpers into cls_api") Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Mickaël Salaün authored
This is needed to force a rebuild of bpf.o when one of its dependencies (e.g. uapi/linux/bpf.h) is updated. Add a phony target. Signed-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
Mickaël Salaün authored
Remove a useless ifdef __NR_bpf as requested by Wang Nan. Inline one-line static functions as it was in the bpf_sys.h file. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
Eric Dumazet authored
Using a reader-writer lock in fast path is silly, when we can instead use RCU or a seqlock. For mlx4 hwstamp clock, a seqlock is the way to go, removing two atomic operations and false sharing. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Ivan Khoronzhuk authored
The usage count function is based on ndev_running flag that is updated before calling ndo_open/close, but if ndo is called in another place, as with suspend/resume, the counter is not changed, that breaks sus/resume. For common resource no difference which device is using it, does matter only device count. So, replace usage count function on var and inc and dec it in ndo_open/close. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
- 14 Feb, 2017 13 commits
-
-
Tobias Klauser authored
pch_gbe_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
hip04_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/sched/act_api.c:532:5: warning: symbol 'nla_memdup_cookie' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Manuel Lauss authored
remove useless ioport.h include. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Manuel Lauss authored
remove the unused timer. I suppose it was intended as a timeout detector, but never properly implemented. Signed-off-by:
-
Alexander Alemayhu authored
Fixes the following warnings: kernel/bpf/verifier.c: In function ‘may_access_direct_pkt_data’: kernel/bpf/verifier.c:702:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (t == BPF_WRITE) ^ kernel/bpf/verifier.c:704:2: note: here case BPF_PROG_TYPE_SCHED_CLS: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max_inv’: kernel/bpf/verifier.c:2057:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2058:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2068:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2069:2: note: here case BPF_JSGE: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max’: kernel/bpf/verifier.c:2009:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2010:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2019:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2020:2: note: here case BPF_JSGE: ^~~~ Reported-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
Alexander Alemayhu <alexander@alemayhu.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Ondrej Zary authored
Even though the port autoselection is enabled by default on AM79C970A, BNC/AUI port does not work because the link is always reported to be down. The link state reported by the chip belongs only to the TP port but the driver uses it regardless of the port used. The chip can't detect BNC/AUI link state. Disable port autoselection and use TP port by default to keep current behavior (link detection works on TP port, BNC/AUI port does not work). Implement ethtool autoneg, port and duplex configuration to allow using the BNC/AUI port. Report the TP link state only if the TP port is selected. When the port autoselection is enabled or AUI port is selected, report the link as always up. Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid forward declarations. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Move the code to clear SUSPEND flag to a separate function to simplify code. Signed-off-by:
-
Nogah Frankel authored
Point back the unregister IPv6 mc table to the bc table. It is done since IPv6 mcast snooping is not supported for Spectrum yet. Reported-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Tested-by:
-
David S. Miller authored
Shannon Nelson says: ==================== sunvnet driver updates The sunvnet ldom virtual network driver was due for some updates and a bugfix or two. These patches address a few items left over from last year's make-over. v2: - changed memory barrier fix to use smp_wmb - put NETIF_F_SG back into the advertised ldmvsw hw_features v3: - the sunvnet_common module doesn't need module_init or _exit v4: - dropped the statistics patch - fixed up "default" tag for SUNVNET_COMMON ==================== Signed-off-by: -
Shannon Nelson authored
The ldmvsw driver is specifically for supporting the ldom virtual networking by running in the primary ldom and using the LDC to connect the remaining ldoms to the outside world via a bridge. With TSO and GSO supported while connected the bridge, things tend to misbehave as seen in our case by delayed packets, enough to begin triggering retransmits and affecting overall throughput. By turning off advertised support for TSO and GSO we restore stable traffic flow through the bridge. Orabug: 23293104 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Shannon Nelson authored
New version and simplify the print code. Signed-off-by:
-
Shannon Nelson authored
The RCU read lock is grabbed first thing in sunvnet_start_xmit_common() so it always needs to be released. This removes the conditional release in the dropped packet error path and removes a couple of superfluous calls in the middle of the code. Reported-by:
Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by:
-
