- 26 Sep, 2019 19 commits
-
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit d64b212e ] When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.deAcked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Arnaldo Carvalho de Melo authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit d95daf5a ] When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 3b817994 ] Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 26c3f154 ] Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by:
-
Charles Keepax authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 4475f8c4 ] A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1 ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit a6ec414a ] If the device driver were to send out a full queue's worth of SBALs, current code would end up discovering the last of those SBALs as PRIMED and erroneously skip the SIGA-w. This immediately stalls the queue. Add a check to not attempt fast-requeue in this case. While at it also make sure that the state of the previous SBAL was successfully extracted before inspecting it. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit e0a12445 ] The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Björn Gerhart authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit f3d43e2e ] Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and added missed NCT6106_REG_TOLERANCE_H. Fixes: 6c009501 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Signed-off-by:
Bjoern Gerhart <gerhart@posteo.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Brian Norris authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit d2b3fe42 ] ieee80211_set_wmm_default() normally sets up the initial CW min/max for each queue, except that it skips doing this if the driver doesn't support ->conf_tx. We still end up calling drv_conf_tx() in some cases (e.g., ieee80211_reconfig()), which also still won't do anything useful...except it complains here about the invalid CW parameters. Let's just skip the WARN if we weren't going to do anything useful with the parameters. Signed-off-by:
Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Thomas Tai authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 94bccc34 ] iscsi_ibft can use ACPI to find the iBFT entry during bootup, currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is a X86 legacy way to find the iBFT by searching through the low memory. This patch changes the dependency so that other arch like ARM64 can use ISCSI_IBFT as long as the arch supports ACPI. ibft_init() needs to use the global variable ibft_addr declared in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected. Moving ibft_addr into the iscsi_ibft.c does not work because if ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't be able to find the variable at compile time. Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 1b0890cd ] Thomas and Juliana report a deadlock when running: (rmmod nf_conntrack_netlink/xfrm_user) conntrack -e NEW -E & modprobe -v xfrm_user They provided following analysis: conntrack -e NEW -E netlink_bind() netlink_lock_table() -> increases "nl_table_users" nfnetlink_bind() # does not unlock the table as it's locked by netlink_bind() __request_module() call_usermodehelper_exec() This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind() won't return until modprobe process is done. "modprobe xfrm_user": xfrm_user_init() register_pernet_subsys() -> grab pernet_ops_rwsem .. netlink_table_grab() calls schedule() as "nl_table_users" is non-zero so modprobe is blocked because netlink_bind() increased nl_table_users while also holding pernet_ops_rwsem. "modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink: ctnetlink_init() register_pernet_subsys() -> blocks on "pernet_ops_rwsem" thanks to xfrm_user module both modprobe processes wait on one another -- neither can make progress. Switch netlink_bind() to "nowait" modprobe -- this releases the netlink table lock, which then allows both modprobe instances to complete. Reported-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Reported-by:
Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Stephane Grosjean authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit fee6a892 upstream. When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit fc05481b upstream. syzbot reported the following crash [0]: BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007 CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x413511 Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48 83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26 R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff Allocated by task 2776: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583 hub_port_connect drivers/usb/core/hub.c:5004 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 16007: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 device_release+0x71/0x200 drivers/base/core.c:1064 kobject_cleanup lib/kobject.c:693 [inline] kobject_release lib/kobject.c:722 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x171/0x280 lib/kobject.c:739 put_device+0x1b/0x30 drivers/base/core.c:2213 usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725 yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881b1859980 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 72 bytes inside of 2048-byte region [ffff8881b1859980, ffff8881b185a180) The buggy address belongs to the page: page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000 raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== A quick look at the yurex_delete() shows that we drop the reference to the usb_device before releasing any buffers associated with the device. Delay the reference drop until we have finished the cleanup. [0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/ Fixes: 6bc235a2 ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: andreyknvl@google.com Cc: gregkh@linuxfoundation.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: syzkaller-bugs@googlegroups.com Cc: dtor@chromium.org Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.comSigned-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 3de7ae0b upstream. Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f9 ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.comSigned-off-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 3f8fd02b upstream. On x86-32 with PTI enabled, parts of the kernel page-tables are not shared between processes. This can cause mappings in the vmalloc/ioremap area to persist in some page-tables after the region is unmapped and released. When the region is re-used the processes with the old mappings do not fault in the new mappings but still access the old ones. This causes undefined behavior, in reality often data corruption, kernel oopses and panics and even spontaneous reboots. Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to all page-tables in the system before the regions can be re-used. References: https://bugzilla.suse.com/show_bug.cgi?id=1118689 Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.orgSigned-off-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 8e998fc2 upstream. With huge-page ioremap areas the unmappings also need to be synced between all page-tables. Otherwise it can cause data corruption when a region is unmapped and later re-used. Make the vmalloc_sync_one() function ready to sync unmappings and make sure vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD is found. Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 51b75b5b upstream. Do not require a struct page for the mapped memory location because it might not exist. This can happen when an ioremapped region is mapped with 2MB pages. Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit c7cd7c74 upstream. In sound_insert_unit(), the controlling structure 's' is allocated through kmalloc(). Then it is added to the sound driver list by invoking __sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is removed from the list through __sound_remove_unit(). If 'index' is not less than 0, -EBUSY is returned to indicate the error. However, 's' is not deallocated on this execution path, leading to a memory leak bug. To fix the above issue, free 's' before -EBUSY is returned. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit c468a8aa upstream. We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e88 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.comSigned-off-by:
-
- 17 Sep, 2019 21 commits
-
-
Stefan Bader authored
Signed-off-by:Stefan Bader <stefan.bader@canonical.com>
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1844416 Properties: no-test-build Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1840081 The backport from upstream misses the fact that get-/ put_events_file() does not exist in this older kernel. Replace those by get-/put_tracing_file(). Signed-off-by:
-
Jiri Olsa authored
BugLink: https://bugs.launchpad.net/bugs/1840081 Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.orgSigned-off-by:
-
Dave Chinner authored
CVE-2018-20976 We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. Essentially, the machine was under memory pressure when the mount was being run, xfs_fs_fill_super() failed after allocating the xfs_mount and attaching it to sb->s_fs_info. It then cleaned up and freed the xfs_mount, but the sb->s_fs_info field still pointed to the freed memory. Hence when the superblock shrinker then ran it fell off the bad pointer. With the superblock shrinker problem fixed at teh VFS level, this stale s_fs_info pointer is still a problem - we use it unconditionally in ->put_super when the superblock is being torn down, and hence we can still trip over it after a ->fill_super call failure. Hence we need to clear s_fs_info if xfs-fs_fill_super() fails, and we need to check if it's valid in the places it can potentially be dereferenced after a ->fill_super failure. Signed-Off-By:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Kleber Souza <kleber.souza@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1840335Signed-off-by:
-
Wanpeng Li authored
BugLink: https://bugs.launchpad.net/bugs/1840335 commit 2fa5f04f upstream. This warning: WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50 CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13 Call Trace: dump_stack+0x99/0xd0 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 enter_from_user_mode+0x32/0x50 error_entry+0x6d/0xc0 ? general_protection+0x12/0x30 ? native_load_gs_index+0xd/0x20 ? do_set_thread_area+0x19c/0x1f0 SyS_set_thread_area+0x24/0x30 do_int80_syscall_32+0x7c/0x220 entry_INT80_compat+0x38/0x50 ... can be reproduced by running the GS testcase of the ldt_gdt test unit in the x86 selftests. do_int80_syscall_32() will call enter_form_user_mode() to convert context tracking state from user state to kernel state. The load_gs_index() call can fail with user gsbase, gsbase will be fixed up and proceed if this happen. However, enter_from_user_mode() will be called again in the fixed up path though it is context tracking kernel state currently. This patch fixes it by just fixing up gsbase and telling lockdep that IRQs are off once load_gs_index() failed with user gsbase. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1840335 This will make it clearer which bits are allocated, in case we need to assign more feature bits for later backports. Signed-off-by:
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1840335 commit 8d8bef50 upstream. Commit 6935224d ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.deSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit 055d8824 ] Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269 ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit d1f0b5dc ] Commit 3968d389 ("bnx2x: Fix Multi-Cos.") which enabled multi-cos feature after prolonged time in driver added some regression causing numerous issues (sudden reboots, tx timeout etc.) reported by customers. We plan to backout this commit and submit proper fix once we have root cause of issues reported with this feature enabled. Fixes: 3968d389 ("bnx2x: Fix Multi-Cos.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Mark Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit 08aa5e7d ] When lag is active, which is controlled by the bonded mlx5e netdev, mlx5 interface unregestering must happen in the reverse order where rdma is unregistered (unloaded) first, to guarantee all references to the lag context in hardware is removed, then remove mlx5e netdev interface which will cleanup the lag context from hardware. Without this fix during destroy of LAG interface, we observed following errors: * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xe4ac33) * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa5aee8). Fixes: a31208b1 ("net/mlx5_core: New init and exit flow for mlx5_core") Reviewed-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Mark Zhang <markz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit 051c7b39 ] In dequeue_func(), there is an if statement on line 74 to check whether skb is NULL: if (skb) When skb is NULL, it is used on line 77: prefetch(&skb->end); Thus, a possible null-pointer dereference may occur. To fix this bug, skb->end is used when skb is not NULL. This bug is found by a static analysis tool STCheck written by us. Fixes: 76e3cc12 ("codel: Controlled Delay AQM") Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Taras Kondratiuk authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit 4da5f001 ] Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Jiri Pirko authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit 55b40dbf ] Commit aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit d7bae09f ] On initialization failure we have to delete the local fdb which was inserted due to the default pvid creation. This problem has been present since the inception of default_pvid. Note that currently there are 2 cases: 1) in br_dev_init() when br_multicast_init() fails 2) if register_netdevice() fails after calling ndo_init() This patch takes care of both since br_vlan_flush() is called on both occasions. Also the new fdb delete would be a no-op on normal bridge device destruction since the local fdb would've been already flushed by br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is called last when adding a port thus nothing can fail after it. Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit ea443e5e ] board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit b617158d ] Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by:
-
Sebastian Parschauer authored
BugLink: https://bugs.launchpad.net/bugs/1840335 commit 49869d2e upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Jonathan Teh (@jonathan-teh) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Phil Turnbull authored
BugLink: https://bugs.launchpad.net/bugs/1840335 [ Upstream commit eda3fc50 ] If a quota bit is set in NFACCT_FLAGS but the NFACCT_QUOTA parameter is missing then a NULL pointer dereference is triggered. CAP_NET_ADMIN is required to trigger the bug. Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1840335 commit 147b9635 upstream. If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have their architecturally maximum values, which defeats the use of FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous machines. Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively saturate at zero. Fixes: 3c739b57 ("arm64: Keep track of CPU feature registers") Cc: <stable@vger.kernel.org> # 4.4.y only Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
