- 27 Sep, 2017 8 commits
-
-
Arkadi Sharshevsky authored
Add support for setting counters on nexthops based on dpipe's adjacency table counter status. This patch also adds the ability for getting the counter value, which will be used by the dpipe adjacency table dump implementation in the next patches. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
In order to add the ability for setting counters on nexthops the RATR register should be extended. Signed-off-by:
-
Arkadi Sharshevsky authored
Add initial support for router adjacency table. The table does lookup based on the nexthop-group index and the local nexthop offset. After locating the nexthop entry it sets the destination MAC address and the egress RIF. Signed-off-by:
-
Arkadi Sharshevsky authored
This is done as a preparation before introducing the ability to dump the adjacency table via dpipe, and to count the table size. The current table implementation avoids tunnel entries, thus a helper for checking if the nexthop group contains tunnel entries is also provided. The mlxsw's nexthop representative struct stays private to the router module. Signed-off-by:
-
Arkadi Sharshevsky authored
Use list_is_last helper to check for last neighbor. Signed-off-by:
-
Arkadi Sharshevsky authored
Keep nexthops in a linked list for easy access. Signed-off-by:
-
Arkadi Sharshevsky authored
This patch adds field for mlxsw's meta header which will be used to describe the match/action behavior of the adjacency table. The fields are: 1. Adj_index - The global index of the nexthop group in the adjacency table. 2. Adj_hash_index - Local index offset which is based on packets hash mod the nexthop group size. Signed-off-by:
-
Arkadi Sharshevsky authored
Fix indentation in mlxsw_meta header's description. Signed-off-by:
-
- 26 Sep, 2017 32 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF metadata for direct access This work enables generic transfer of metadata from XDP into skb, meaning the packet has a flexible and programmable room for meta data, which can later be used by BPF to set various skb members when passing up the stack. For details, please see second patch. Support has been implemented and tested with two drivers, and should be straight forward to add to other drivers as well which properly support head adjustment already. ==================== Signed-off-by: -
Daniel Borkmann authored
Implement support for transferring XDP meta data into skb for ixgbe driver; before calling into the program, xdp.data_meta points to xdp.data, where on program return with pass verdict, we call into skb_metadata_set(). We implement this for the default ixgbe_build_skb() variant. For the ixgbe_construct_skb() that is used when legacy-rx buffer mananagement mode is turned on via ethtool, I found that XDP gets 0 headroom, so neither xdp_adjust_head() nor xdp_adjust_meta() can be used with this. Just add a comment with explanation for this operating mode. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Implement support for transferring XDP meta data into skb for nfp driver; before calling into the program, xdp.data_meta points to xdp.data, where on program return with pass verdict, we call into skb_metadata_set(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Daniel Borkmann authored
Add various test_verifier selftests, and a simple xdp/tc functional test that is being attached to veths. Also let new versions of clang use the recently added -mcpu=probe support [1] for the BPF target, so that it can probe the underlying kernel for BPF insn set extensions. We could also just set this options always, where older versions just ignore it and give a note to the user that the -mcpu value is not supported, but given emitting the note cannot be turned off from clang side lets not confuse users running selftests with it, thus fallback to the default generic one when we see that clang doesn't support it. Also allow CPU option to be overridden in the Makefile from command line. [1] https://github.com/llvm-mirror/llvm/commit/d7276a40d87b89aed89978dec6457a5b8b3a0db5Signed-off-by:
-
Daniel Borkmann authored
Looks like a couple of updates missed to get carried into tools/include/uapi/, so copy the bpf.h header as usual to pull in latest updates. Signed-off-by:
-
Daniel Borkmann authored
This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by:
-
Daniel Borkmann authored
Just do the rename into bpf_compute_data_pointers() as we'll add one more pointer here to recompute. Signed-off-by:
-
Himanshu Jha authored
Use setup_timer and mod_timer API instead of structure assignments. This is done using Coccinelle and semantic patch used for this as follows: @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed: iWARP fixes and enhancements This patch series includes several fixes and enhancements related to iWARP. Patch #1 is actually the last of the initial iWARP submission. It has been delayed until now as I wanted to make sure that qedr supports iWARP prior to enabling iWARP device detection. iWARP changes in RDMA tree have been accepted and targeted at kernel 4.15, therefore, all iWARP fixes for this cycle are submitted to net-next. Changes from v1->v2 - Added "Fixes:" tag to commit message of patch #3 ==================== Signed-off by: Michal.Kalderon@cavium.com Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Michal Kalderon authored
A SYN packet which arrives with errors from FW should be dropped. This required adding an additional field to the ll2 rx completion data. Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Michal Kalderon authored
The maximum number of CQs supported is bound to the number of connections supported, which differs between RoCE and iWARP. This fixes a crash that occurred in iWARP when running 1000 sessions using perftest. Fixes: 67b40dcc ("qed: Implement iWARP initialization, teardown and qp operations") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michal Kalderon authored
iWARP requires OOO support which is already provided by the ll2 interface (until now was used only for iSCSI offload). The changes mostly include opening a ll2 dedicated connection for OOO and notifiying the FW about the handle id. Signed-off-by:
-
Michal Kalderon authored
This patch is the last of the initial iWARP patch series. It adds the possiblity to actually detect iWARP from the device and enable it in the critical locations which basically make iWARP available. It wasn't submitted until now as iWARP hadn't been accepted into the rdma tree. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by:
-
Alexey Dobriyan authored
Key length can't be negative. Leave comparisons against nla_len() signed just in case truncated attribute can sneak in there. Space savings: add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-7 (-7) function old new delta pneigh_delete 273 272 -1 mlx5e_rep_netevent_event 1415 1414 -1 mlx5e_create_encap_header_ipv6 1194 1193 -1 mlx5e_create_encap_header_ipv4 1071 1070 -1 cxgb4_l2t_get 1104 1103 -1 __pneigh_lookup 69 68 -1 __neigh_create 2452 2451 -1 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Neigh entry size can't be negative. Space savings: add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-7 (-7) function old new delta lowpan_neigh_construct 25 24 -1 clip_seq_sub_iter 152 151 -1 clip_ioctl 1475 1474 -1 clip_constructor 93 92 -1 __neigh_create 2455 2452 -3 Signed-off-by:
-
Eric Dumazet authored
As measured in my prior patch ("sch_netem: faster rb tree removal"), rbtree_postorder_for_each_entry_safe() is nice looking but much slower than using rb_next() directly, except when tree is small enough to fit in CPU caches (then the cost is the same) Also note that there is not even an increase of text size : $ size net/core/skbuff.o.before net/core/skbuff.o text data bss dec hex filename 40711 1298 0 42009 a419 net/core/skbuff.o.before 40711 1298 0 42009 a419 net/core/skbuff.o From: Eric Dumazet <edumazet@google.com> Signed-off-by: -
Eric Dumazet authored
While running TCP tests involving netem storing millions of packets, I had the idea to speed up tfifo_reset() and did experiments. I tried the rbtree_postorder_for_each_entry_safe() method that is used in skb_rbtree_purge() but discovered it was slower than the current tfifo_reset() method. I measured time taken to release skbs with three occupation levels : 10^4, 10^5 and 10^6 skbs with three methods : 1) (current 'naive' method) while ((p = rb_first(&q->t_root))) { struct sk_buff *skb = netem_rb_to_skb(p); rb_erase(p, &q->t_root); rtnl_kfree_skbs(skb, skb); } 2) Use rb_next() instead of rb_first() in the loop : p = rb_first(&q->t_root); while (p) { struct sk_buff *skb = netem_rb_to_skb(p); p = rb_next(p); rb_erase(&skb->rbnode, &q->t_root); rtnl_kfree_skbs(skb, skb); } 3) "optimized" method using rbtree_postorder_for_each_entry_safe() struct sk_buff *skb, *next; rbtree_postorder_for_each_entry_safe(skb, next, &q->t_root, rbnode) { rtnl_kfree_skbs(skb, skb); } q->t_root = RB_ROOT; Results : method_1:while (rb_first()) rb_erase() 10000 skbs in 690378 ns (69 ns per skb) method_2:rb_first; while (p) { p = rb_next(p); ...} 10000 skbs in 541846 ns (54 ns per skb) method_3:rbtree_postorder_for_each_entry_safe() 10000 skbs in 868307 ns (86 ns per skb) method_1:while (rb_first()) rb_erase() 99996 skbs in 7804021 ns (78 ns per skb) method_2:rb_first; while (p) { p = rb_next(p); ...} 100000 skbs in 5942456 ns (59 ns per skb) method_3:rbtree_postorder_for_each_entry_safe() 100000 skbs in 11584940 ns (115 ns per skb) method_1:while (rb_first()) rb_erase() 1000000 skbs in 108577838 ns (108 ns per skb) method_2:rb_first; while (p) { p = rb_next(p); ...} 1000000 skbs in 82619635 ns (82 ns per skb) method_3:rbtree_postorder_for_each_entry_safe() 1000000 skbs in 127328743 ns (127 ns per skb) Method 2) is simply faster, probably because it maintains a smaller working size set. Note that this is the method we use in tcp_ofo_queue() already. I will also change skb_rbtree_purge() in a second patch. Signed-off-by:Eric Dumazet <edumazet@google.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
yuan linyu authored
it seems no need to keep tun_get() and __tun_get() at same time. Signed-off-by:
yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by:
-
Ganesh Goudar authored
reset the driver's DCB state in couple of places where it was missing. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Rick Farrington says: ==================== liquidio: firmware loading 1. Allow host driver parameter to override auto-loaded firmware (in flash). 2. Verify version of firmware that is auto-loaded from flash. 3. Change value of fw_type module parameter to reflect default firmware image name that is loaded by host driver (in /sys/module/liquidio/...) ==================== Signed-off-by: -
Rick Farrington authored
Signed-off-by:
Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Rick Farrington authored
Signed-off-by:
-
Rick Farrington authored
Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: port enabling This patchset makes slave open and close symmetrical and provides helpers for enabling or disabling a given DSA port. Changes in v3: - save the phy_device change for a future patchset Changes in v2: - do not remove the phy argument from port enable/disable ==================== Signed-off-by: -
Vivien Didelot authored
Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
