quiet_cmd_relocs lacks a whitespace which results in:

  LD      vmlinux
  SORTEX  vmlinux
  SYSMAP  System.map
  RELOCS vmlinux
  Building modules, stage 2.
  MODPOST 64 modules

After this patch:

  LD      vmlinux
  SORTEX  vmlinux
  SYSMAP  System.map
  RELOCS  vmlinux
  Building modules, stage 2.
  MODPOST 64 modules

Typo is present in kernel tree since the introduction of relocatable
kernel support in commit e818fac5 ("MIPS: Generate relocation table
when CONFIG_RELOCATABLE"), but the relocation scripts were moved to
Makefile.postlink later with commit 44079d35 ("MIPS: Use
Makefile.postlink to insert relocations into vmlinux").

Fixes: 44079d35 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
[paulburton@kernel.org: Fixup commit references in commit message.]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Loongson is a MIPS-compatible processor vendor.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com
Cc: paul.burton@mips.com
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: maz@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.co
Cc: devicetree@vger.kernel.org

Refresh CU1000-Neo's defconfig to support ADS7830 based HWMON
and AP6212A WiFi module.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: syq@debian.org
Cc: ralf@linux-mips.org
Cc: rick.tyliu@ingenic.com
Cc: jason@lakedaemon.net
Cc: keescook@chromium.org
Cc: geert+renesas@glider.be
Cc: krzk@kernel.org
Cc: paul@crapouillou.net
Cc: prasannatsmkumar@gmail.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: ebiederm@xmission.com

Add I2C0/I2C1/I2C2 nodes for X1000 and add I2C0, ADS7830,
MSC1, AP6212A, wlan_pwrseq nodes for CU1000-Neo.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: syq@debian.org
Cc: ralf@linux-mips.org
Cc: rick.tyliu@ingenic.com
Cc: jason@lakedaemon.net
Cc: keescook@chromium.org
Cc: geert+renesas@glider.be
Cc: krzk@kernel.org
Cc: paul@crapouillou.net
Cc: prasannatsmkumar@gmail.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: ebiederm@xmission.com

vDSO VMA address is saved in mm_context for the purpose of using
restorer from vDSO page to return to userspace after signal handling.

In Checkpoint Restore in Userspace (CRIU) project we place vDSO VMA
on restore back to the place where it was on the dump.

Make vDSO code track the VMA address by supplying .mremap() fops
the same way it's done for x86 and arm by:
commit b059a453 ("x86/vdso: Add mremap hook to vm_special_mapping")
commit 73958695 ("arm64/vdso: Support mremap() for vDSO").
Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

The radio module asserts CTS when its RX buffer has 10 bytes left.
Putting just 8 instead of 16 bytes into the UART1 TX buffer on the Linux
side ensures to not overflow the RX buffer on the radio module side.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org

This patch enables the WMAC controller on the GARDENA smart Gateway and
configures the board specific factory EEPROM setting for this driver.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org

This patch adds the WMAC controller description to the MT7628A dtsi file.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org

Unlike its PCI counterpart, tc_match_device() was never used outside
the TURBOchannel bus code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Maciej W . Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Unlike its PCI counterpart, gio_match_device() was never used outside
the GIO bus code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

If kzalloc fails, it should return -ENOMEM, otherwise may trigger a NULL
pointer dereference.

Fixes: 3adeb256 ("MIPS: Loongson: Improve LEFI firmware interface")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: khilman@baylibre.com
Cc: leoyang.li@nxp.com
Cc: khalasa@piap.pl
Cc: john@phrozen.org
Cc: matthias.bgg@gmail.com
Cc: agross@kernel.org
Cc: bjorn.andersson@linaro.org
Cc: kgene@kernel.org
Cc: krzk@kernel.org
Cc: mripard@kernel.org
Cc: wens@csie.org
Cc: ssantosh@kernel.org
Cc: jun.nie@linaro.org
Cc: shawnguo@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org

The FIELD_SIZEOF() macro was redundant, and is being removed from the
kernel. Since commit c593642c ("treewide: Use sizeof_field() macro")
this is one of the last users of the old macro, so replace it.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org

Use resource_size rather than a verbose computation on
the end and start fields.

The semantic patch that makes these changes is as follows:
(http://coccinelle.lip6.fr/)

<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kernel-janitors@vger.kernel.org
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

SGI IOC3 chip has integrated ethernet, keyboard and mouse interface.
It also supports connecting a SuperIO chip for serial and parallel
interfaces. IOC3 is used inside various SGI systemboards and add-on
cards with different equipped external interfaces.

Support for ethernet and serial interfaces were implemented inside
the network driver. This patchset moves out the not network related
parts to a new MFD driver, which takes care of card detection,
setup of platform devices and interrupt distribution for the subdevices.

Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Network part: Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Network part: Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-serial@vger.kernel.org

Our chosen byte swapping, which is what firmware already uses, is to
do readl/writel by normal lw/sw intructions (data invariance). This
also means we need to mangle addresses for u8 and u16 accesses. The
mangling for 16bit has been done aready, but 8bit one was missing.
Correcting this causes different addresses for accesses to the
SuperIO and local bus of the IOC3 chip. This is fixed by changing
byte order in ioc3 and m48rtc_rtc structs.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org

Implented mapping of PCI INTB/C/D, which is needed for PCI multifunction
devices, PCI-PCI bridges and IOC3.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

per_cpu_init is called exactly once for every CPU. So there is no
need for protection via slice_map.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Remember CPU speed while scanning for available CPUs to avoid
looking it up a second time when printing CPU speed.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Reduce number of reserved interrupts by removing bits copied from IRIX
and not used by Linux.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Move all IP27 declarations into one file.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

IP35 has a different way to find out regions, so we move the IP27
implementation to IP27 specific file.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Convert printing of error status registers to use structs, which
are defines for IP27 and IP35.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

The upcoming header files for SGI-IP35 shouldn't add new typedef. To
be able to share ip27-hubio.c we need to access register layouts no
longer via a typedef.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

SGI-IP35 uses slightly different memory layout, so we move IP27
defines to IP27 specific files and keep the common stuff in kldir.h
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

get_nasid() will be different for SGI-IP35, therefore move IP27
implementation to IP27 specific file.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Extracting node id from HUB register is specific to IP27 alias SN0.
Move the macro definition to a SN0 header file.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

The only piece needed in ip27.h is SEND_NMI. Move the define to the only
place where it's used and remove ip27.h
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

By including agent.h where hub related defines/structs are needed, we
have only one place to select, which agent chip (HUB or BEDROCK) is used.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

By using cpu physid already present when scanning for CPUs
get_cpu_slice() is unsued and can be removed together with two
other then used functions.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Replication is done on a per node basis, so the use of cpumask
was a misusage here.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Commit 716850ab ("MIPS: eBPF: Initial eBPF support for MIPS32
architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has
previously only been availailable for MIPS64. It was my understanding at
the time that the BPF test suite was passing & JITing a comparable
number of tests to our cBPF JIT [1], but it turns out that was not the
case.

The eBPF JIT has a number of problems on MIPS32:

- Most notably various code paths still result in emission of MIPS64
  instructions which will cause reserved instruction exceptions & kernel
  panics when run on MIPS32 CPUs.

- The eBPF JIT doesn't account for differences between the O32 ABI used
  by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably
  arguments beyond the first 4 are passed on the stack in O32, and this
  is entirely unhandled when JITing a BPF_CALL instruction. Stack space
  must be reserved for arguments even if they all fit in registers, and
  the callee is free to assume that stack space has been reserved for
  its use - with the eBPF JIT this is not the case, so calling any
  function can result in clobbering values on the stack & unpredictable
  behaviour. Function arguments in eBPF are always 64-bit values which
  is also entirely unhandled - the JIT still uses a single (32-bit)
  register per argument. As a result all function arguments are always
  passed incorrectly when JITing a BPF_CALL instruction, leading to
  kernel crashes or strange behavior.

- The JIT attempts to bail our on use of ALU64 instructions or 64-bit
  memory access instructions. The code doing this at the start of
  build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW,
  when it should really be checking BPF_SIZE() & only doing so when
  BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false
  positives that cause more bailouts than intended, and that in turns
  hides some of the problems described above.

- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF
  instructions that the MIPS32 eBPF JIT bails out on, leading to most
  cBPF programs not being JITed at all.

Until these problems are resolved, revert the removal of the cBPF JIT
performed by commit 716850ab ("MIPS: eBPF: Initial eBPF support for
MIPS32 architecture."). Together with commit f8fffebd ("MIPS: BPF:
Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to
the same state it was prior to the introduction of the broken eBPF JIT
support.

[1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 716850ab ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Tony Ambardar <itugrok@yahoo.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

There is no need to have the 'T *v' variable static
since new value always be assigned before use it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: <jiaxun.yang@flygoat.com>
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <gregkh@linuxfoundation.org>
Cc: <tglx@linutronix.de>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <kernel-janitors@vger.kernel.org>

Implement placing of per_cpu into memory, which is local to the CPU.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Local node distance is defined as LOCAL_DISTANCE, which is 10. Use the
define to give back correct local distance.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

node_distance must return values starting from 10 up to 255. 10 means
local, 255 unreachable.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

1.Add X1830 system type for cat /proc/cpuinfo to give out X1830.
2.Change "PRID_IMP_XBURST" to "PRID_IMP_XBURST_REV1" and add a
  new "PRID_IMP_XBURST_REV2" for new Ingenic CPUs which has
  XBurst with MXU2 SIMD ISA.

Notice:
1."PRID_IMP_XBURST_REV2" is corresponds to the latest XBurst
  processor with 128bit MXU2 SIMD instruction set, not the upcoming
  XBurst2 processor. This version of the processors fixes issues
  such as BTB and HPTLB.
2.In order to simplify and reuse the code, the "c->cputype" and
  the "c->writecombine" and the "__cpu_name[cpu]" in the original
  "PRID_IMP_XBURST" (now is "PRID_IMP_XBURST_REV1") are removed,
  and the corresponding settings are abtained through fall-through
  to "PRID_IMP_XBURST_REV2", which will cause the name that was
  previously mistakenly called "JZRISC" to become to the real name
  "XBurst".
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: yamada.masahiro@socionext.com
Cc: tglx@linutronix.de
Cc: chenhc@lemote.com
Cc: tbogendoerfer@suse.de
Cc: paul.burton@mips.com
Cc: paul@crapouillou.net
Cc: jhogan@kernel.org
Cc: fancer.lancer@gmail.com
Cc: ralf@linux-mips.org
Cc: jiaxun.yang@flygoat.com

Add a device tree for the Ingenic X1000 based YSH & ATIL CU Neo board.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
[paulburton@kernel.org:
  Drop stale mention of previously unselectable Kconfig entry.]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mripard@kernel.org
Cc: shawnguo@kernel.org
Cc: mark.rutland@arm.com
Cc: alexandre.belloni@bootlin.com
Cc: ralf@linux-mips.org
Cc: heiko@sntech.de
Cc: icenowy@aosc.io
Cc: ak@linux.intel.com
Cc: laurent.pinchart@ideasonboard.com
Cc: krzk@kernel.org
Cc: geert+renesas@glider.be
Cc: prasannatsmkumar@gmail.com
Cc: keescook@chromium.org
Cc: ebiederm@xmission.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: 772753199@qq.com

Add Ingenic XBurst based boards, prepare for later dts.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mripard@kernel.org
Cc: shawnguo@kernel.org
Cc: mark.rutland@arm.com
Cc: alexandre.belloni@bootlin.com
Cc: ralf@linux-mips.org
Cc: heiko@sntech.de
Cc: icenowy@aosc.io
Cc: ak@linux.intel.com
Cc: laurent.pinchart@ideasonboard.com
Cc: krzk@kernel.org
Cc: geert+renesas@glider.be
Cc: paul@crapouillou.net
Cc: prasannatsmkumar@gmail.com
Cc: keescook@chromium.org
Cc: ebiederm@xmission.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: 772753199@qq.com

The "yna" is an acronym of the "YSH & ATIL".
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: paul.burton@mips.com
Cc: jhogan@kernel.org
Cc: mripard@kernel.org
Cc: shawnguo@kernel.org
Cc: mark.rutland@arm.com
Cc: alexandre.belloni@bootlin.com
Cc: ralf@linux-mips.org
Cc: heiko@sntech.de
Cc: icenowy@aosc.io
Cc: ak@linux.intel.com
Cc: laurent.pinchart@ideasonboard.com
Cc: krzk@kernel.org
Cc: geert+renesas@glider.be
Cc: paul@crapouillou.net
Cc: prasannatsmkumar@gmail.com
Cc: keescook@chromium.org
Cc: ebiederm@xmission.com
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: 772753199@qq.com