- 25 Mar, 2021 34 commits
-
-
Oleksij Rempel authored
Add simple IRQ or GPIO base counter. This device is used to measure rotation speed of some agricultural devices, so no high frequency on the counter pin is expected. The maximal measurement frequency depends on the CPU and system load. On the idle iMX6S I was able to measure up to 20kHz without count drops. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/20210301080401.22190-3-o.rempel@pengutronix.deSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Oleksij Rempel authored
Add binding for the interrupt counter node Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210301080401.22190-2-o.rempel@pengutronix.deSigned-off-by:
-
Alexandru Ardelean authored
This change converts the driver to use device-managed functions in the probe function. For the clock and regulator disable, some devm_add_action_or_reset() calls are required, and then devm_iio_device_register() function can be used register the IIO device. The final aim here would be for IIO to export only the device-managed functions of it's API. That's a long way to go and this a small step in that direction. Signed-off-by:
Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210310095131.47476-1-aardelean@deviqon.comSigned-off-by:
-
Alexandru Ardelean authored
This change converts the driver to use device-managed functions in the probe function. The power-down call is handled now via a devm_add_action_or_reset() hook, and then devm_iio_device_register() can be used to register the IIO device. The final aim here would be for IIO to export only the device-managed functions of it's API. That's a long way to go and this a small step in that direction. Signed-off-by:
-
Alexandru Ardelean authored
Thanks to Lars for finding this. The free of the 'attached_buffers' array should be done as late as possible. This change moves it to iio_buffers_put(), which looks like the best place for it, since it takes place right before the IIO device data is free'd. The free of this array will be handled by calling iio_device_free(). The iio_buffers_put() function is renamed to iio_device_detach_buffers() since the role of this function changes a bit. It looks like this issue was ocurring on the error path of iio_buffers_alloc_sysfs_and_mask() and in iio_buffers_free_sysfs_and_mask() Added a comment in the doc-header of iio_device_attach_buffer() to mention how this will be free'd in case anyone is reading the code and becoming confused about it. Fixes: ee708e6b ("iio: buffer: introduce support for attaching more IIO buffers") Reported-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210307185444.32924-1-ardeleanalex@gmail.comSigned-off-by:
-
Linus Walleij authored
Before trying the custom method of reading the sensor as raw and then converting, we want to use iio_read_channel_processed_scale() which first tries to see if the ADC can provide a processed value directly, else reads raw and applies scaling inside of IIO using the scale attributes of the ADC. We need to multiply the scaled value with 1000 to get to microvolts from millivolts which is what processed IIO channels returns. Keep the code that assumes 12bit ADC around as a fallback. This gives correct readings on the AB8500 thermistor inputs used in the Ux500 HREFP520 platform for reading battery and board temperature. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Link: https://lore.kernel.org/linux-iio/20201224011607.1059534-1-linus.walleij@linaro.org/Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210308100219.2732156-2-linus.walleij@linaro.orgSigned-off-by:
-
Linus Walleij authored
Since the old iio_read_channel_processed() would lose precision if we fall back to reading raw and scaling, we introduce a new API that will pass in a scale factor when reading a processed channel: iio_read_channel_processed_scale(). Refactor iio_read_channel_processed() as a special case with scale factor 1. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Link: https://lore.kernel.org/linux-iio/20201224011607.1059534-1-linus.walleij@linaro.org/Signed-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. In xadc_alloc_trigger, given dev is indio_dev->dev.parent, and we call devm_iio_trigger_alloc wit dev as argument, we do not have to set data->trig->dev.parent to indio_dev->dev.parent anymore. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210309193620.2176163-9-gwendal@chromium.orgSigned-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with dev as parent, we do not have to set data->trig->dev.parent to indio_dev->dev.parent anymore. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210309193620.2176163-8-gwendal@chromium.orgSigned-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with &client->dev as parent, we do not have to set data->trig->dev.parent to indio_dev->dev.parent anymore. Signed-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given data->dev is dev, and we call devm_iio_trigger_alloc with dev instead of data->dev, we do not have to set data->trig->dev.parent to dev anymore. Signed-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Given data->client is client, and we call devm_iio_trigger_alloc() with &client->dev, we do not have to set data->trig->dev.parent to &data->client->dev anymore. Signed-off-by:
-
Gwendal Grignou authored
iio_trigger_set_drvdata() sets the trigger device parent to first argument of viio_trigger_alloc(), no need to do it again in the driver code. Remove adis_trigger_setup() to match other drivers where setting the trigger is usually done in the probe() routine. Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210309193620.2176163-4-gwendal@chromium.orgSigned-off-by:
-
Gwendal Grignou authored
Use cocci semantic patch: @@ expression trigger, P; @@ trigger = devm_iio_trigger_alloc(P, ...); ... - trigger->dev.parent = P; To remove trigger->dev.parent, since it is set by default. Signed-off-by:
-
Gwendal Grignou authored
When allocated with [devm_]iio_trigger_alloc(), set trig device parent to the device the trigger is allocated for by default. It can always be reassigned in the probe routine. Change iio_trigger_alloc() API to add the device pointer to be coherent with devm_iio_trigger_alloc, using similar interface to iio_device_alloc(). Signed-off-by:
-
Alexandru Tachici authored
Currently AD7124-8 driver cannot use more than 8 IIO channels because it was assigning the channel configurations bijectively to channels specified in the device-tree. This is not possible to do when using more than 8 channels as AD7124-8 has only 8 configuration registers. To allow the user to use all channels at once the driver will keep in memory configurations for all channels but will program only 8 of them at a time on the device. If multiple channels have the same configuration, only one configuration register will be used. If there are more configurations than available registers only the last 8 used configurations will be allowed to exist on the device in a LRU fashion. Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210311091154.47785-2-alexandru.tachici@analog.comSigned-off-by:
-
Andy Shevchenko authored
The unnecessary explicit casting is being used. Drop it for good. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210312134903.4296-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
In a few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by:
-
Andy Shevchenko authored
In a few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by:
-
Andy Shevchenko authored
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by:
-
Stephen Boyd authored
Add support for a ChromeOS EC proximity driver that exposes a "front" proximity sensor via the IIO subsystem. The EC decides when front proximity is near and sets an MKBP switch 'EC_MKBP_FRONT_PROXIMITY' to notify the kernel of proximity. Similarly, when proximity detects something far away it sets the switch bit to 0. For now this driver exposes a single sensor, but it could be expanded in the future via more MKBP bits if desired. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Stephen Boyd authored
Some cros ECs support a front proximity MKBP event via 'EC_MKBP_FRONT_PROXIMITY'. Add a DT binding to document this feature via a node that is a child of the main cros_ec device node. Devices that have this ability will describe this in firmware. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: <devicetree@vger.kernel.org> Reviewed-by:
-
Stephen Boyd authored
Some cros ECs support a front proximity MKBP event via 'EC_MKBP_FRONT_PROXIMITY'. Add this define so it can be used in a future patch. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Acked-by:
-
Gwendal Grignou authored
Remove kernel-doc keyword from function header comment. It fixes issues spotted by scripts/kernel-doc like: drivers/iio/<driver>.c:3: info: Scanning doc for function <component name> drivers/iio/<driver>.c:X: warning: expecting prototype for <component name>. Prototype was for <function>() instead To reproduce the errors: scripts/kernel-doc -v -none $(find drivers/iio/ -name \*.c \ -exec head -2 {} \+ | grep -B2 -e '\*\*' | grep '==' | cut -d ' ' -f 2) After, confirm these errors are gone with: scripts/kernel-doc -v -none $(git show --name-only | grep -e "^driver") Signed-off-by: -
Alexandru Ardelean authored
As pointed by Lars, this doesn't require a zero-check. Also, while looking at this a little closer at it (again), the masking can be done later, as there is a zero-check for 'mode_flags' anyway, which returns -EINVAL. And we only need the 'mode_flags' later in the logic. This change is more of a tweak. Fixes: e36db6a0 ("iio: kfifo: add devm_iio_kfifo_buffer_setup() helper") Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Gwendal Grignou authored
Allow setting frequency below 1Hz or sub 1Hz precision. Useful for slow sensors like ALS. Test frequency is set properly: modprobe iio-trig-hrtimer && \ mkdir /sys/kernel/config/iio/triggers/hrtimer/t1 && \ cd /sys/bus/iio/devices/triggerX ; for i in 1 .1 .01 .001 ; do echo $i > sampling_frequency cat sampling_frequency done Signed-off-by:
-
Baruch Siach authored
The ADI device-drivers-devel list no longer exists. Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/69b3e45e7666a1dd74a83df0b84ef8a63bf090ea.1614082343.git.baruch@tkos.co.ilSigned-off-by:
-
Sean Nyekjaer authored
Improve readability by fixing indentation. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20210301080029.1974797-1-sean@geanix.comSigned-off-by:
-
Ivan Mikhaylov authored
Add the proximity rate optional option and handling of it for vishay vcnl3020. Signed-off-by:
Ivan Mikhaylov <i.mikhaylov@yadro.com> Link: https://lore.kernel.org/r/20210225201444.12983-2-i.mikhaylov@yadro.comSigned-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This is part of a bigger cleanup. Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/Signed-off-by:
Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by:
Mircea Caprioru <mircea.caprioru@analog.com> Link: https://lore.kernel.org/r/20200928131333.36646-3-mircea.caprioru@analog.comSigned-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This is part of a bigger cleanup. Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This is part of a bigger cleanup. Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/Signed-off-by:
-
Jonathan Cameron authored
This control on the gain of a measurement used for time of flight sensing is standard but the expected values for different enviroments may not be. As we cannot have the same ABI element documented in two files, add a generic version to sysfs-bus-iio-proximity and a note on the expected value vs measuring environment for the as3935. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-distance-srf08:0 ./Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935:8 Cc: Matt Ranostay <matt.ranostay@konsulko.com> Reported-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Jonathan Cameron authored
These contain only one entry for out_current_heater_raw (_available). Document this in a new sysfs-bus-iio-humidity file, and make it a little more generic by allowing for non 0/1 values. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:0 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:0 Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:1 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:1 Cc: Eugene Zaikonnikov <ez@norphonic.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Reported-by:
-
- 11 Mar, 2021 6 commits
-
-
Linus Walleij authored
To get access to the big endian byte order parsing helpers drivers need to include <asm/unaligned.h> and nothing else. Cc: Gene Chen <gene_chen@richtek.com> Suggested-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Nuno Sa authored
Add some helpers to lock and unlock the device. As this is such a simple change, we update all the users that were using the lock already in this patch. Signed-off-by:
-
Nuno Sá authored
`adi,scaled-output-hz` is no longer used by the driver. Acked-by:
-
Nuno Sa authored
With this patch, we don't force users to define the IMU scaled internal sampling rate once in the devicetree. Now it's dynamically calculated at runtime depending on the desired output rate given by users. Calculating the sync_scale dynamically gives us better chances of achieving a perfect/integer value for DEC_RATE (thus giving more flexibility). The math is: 1. lcm of the input clock and the desired output rate. 2. get the highest multiple of the previous result lower than the adis max rate. 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE and DEC_RATE (to get the user output rate). Signed-off-by: -
Nuno Sa authored
When using PPS mode, the input clock needs to be scaled so that we have an IMU sample rate between (optimally) 4000 and 4250. After this, we can use the decimation filter to lower the sampling rate in order to get what the user wants. Optimally, the user sample rate is a multiple of both the IMU sample rate and the input clock. Hence, calculating the sync_scale dynamically gives us better chances of achieving a perfect/integer value for DEC_RATE. The math here is: 1. lcm of the input clock and the desired output rate. 2. get the highest multiple of the previous result lower than the adis max rate. 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE and DEC_RATE (to get the user output rate). Fixes: 326e2357 ("iio: imu: adis16480: Add support for external clock") Signed-off-by: -
Alexandru Ardelean authored
The channels are of type iio_chan_spec, not axi_adc_chan_spec. They were in some earlier version, but forgot to rename in the doc-string. Fixes: ef040706 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210219090134.48057-1-alexandru.ardelean@analog.comSigned-off-by:
-
