- 14 Feb, 2018 9 commits
-
-
Raghava Aditya Renukunta authored
Preserve the current MSIX mode value in the OMR before rewriting the OMR to initiate the IOP or Soft Reset. Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Raghava Aditya Renukunta authored
IOP_RESET takes a long time to complete. If controller is in a state where we can bring it back with init struct, send a DropIO sync command instead. - If controller is faulted perform standard IOP_RESET in aac_srcv_init. - If controller is not faulted get adapter properties and extended properties. - Update the sa_firmware variable and determine if DropIO request is supported. - Issue DropIO request, and get the number of outstanding commands. - If all commands are complete with success (CT_OK), consider IOP_RESET is complete. - If any commands timeout, Perform the IOP_RESET. Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
gcc-8 warns during link-time optimization that the strncpy() call passes the size of the source buffer rather than the destination: drivers/scsi/qedf/qedf_dbg.c: In function 'qedf_uevent_emit': include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=] This changes it to strscpy() with the correct length, guaranteeing a properly nul-terminated string of the right size. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
The prototype for qedf_dbg_fops/qedf_debugfs_ops doesn't match the definition, which causes the final link to fail with link-time optimizations: drivers/scsi/qedf/qedf_main.c:34: error: type of 'qedf_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch] extern struct file_operations qedf_dbg_fops; drivers/scsi/qedf/qedf_debugfs.c:443: note: 'qedf_dbg_fops' was previously declared here const struct file_operations qedf_dbg_fops[] = { drivers/scsi/qedf/qedf_main.c:33: error: type of 'qedf_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch] extern struct qedf_debugfs_ops qedf_debugfs_ops; drivers/scsi/qedf/qedf_debugfs.c:102: note: 'qedf_debugfs_ops' was previously declared here struct qedf_debugfs_ops qedf_debugfs_ops[] = { This corrects the prototype and moves it into a shared header file where it belongs. The file operations can also be marked 'const' like the qedf_debugfs_ops. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Pointer disc is being intializated a value that is never read and then re-assigned the same value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/scsi/libfc/fc_disc.c:734:18: warning: Value stored to 'disc' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Pointer fcport is initialized with a value that is never read, it is re-assigned a new value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/scsi/qedf/qedf_io.c:920:21: warning: Value stored to 'fcport' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arnd Bergmann authored
When link-time optimizations are enabled, qedi fails to build because of mismatched prototypes: drivers/scsi/qedi/qedi_gbl.h:27:37: error: type of 'qedi_dbg_fops' does not match original declaration [-Werror=lto-type-mismatch] extern const struct file_operations qedi_dbg_fops; ^ drivers/scsi/qedi/qedi_debugfs.c:239:30: note: 'qedi_dbg_fops' was previously declared here const struct file_operations qedi_dbg_fops[] = { ^ drivers/scsi/qedi/qedi_gbl.h:26:32: error: type of 'qedi_debugfs_ops' does not match original declaration [-Werror=lto-type-mismatch] extern struct qedi_debugfs_ops qedi_debugfs_ops; ^ drivers/scsi/qedi/qedi_debugfs.c:102:25: note: 'qedi_debugfs_ops' was previously declared here struct qedi_debugfs_ops qedi_debugfs_ops[] = { This changes the declaration to match the definition, and adapts the users as necessary. Since both array can be constant here, I'm adding the 'const' everywhere for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Laurence Oberman authored
This patch adds two new parameters to the scsi_debug driver. During various fault injection scenarios it would be useful to be able to pick a specific starting sector and number of follow on sectors where a MEDIUM ERROR for reads would be returned against a scsi-debug device. Right now this only works against sector 0x1234 and OPT_MEDIUM_ERR_NUM follow on sectors. However during testing of md-raid and other scenarios I wanted more flexibility. The idea is add 2 new parameters: medium_error_start medium_error_count If medium_error_start is set then we don't use the default of OPT_MEDIUM_ERR_ADDR, but use that set value. If medium_error_count is set we use that value otherwise default to OPT_MEDIUM_ERR_NUM. Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Since commit 64d513ac ("scsi: use host wide tags by default") all SCSI requests have a tag, whether or not scsi-mq is enabled. Additionally, it is safe to use blk_mq_unique_tag() and blk_mq_unique_tag_to_hwq() for legacy SCSI queues. Since this means that the sdebug_mq_active variable is superfluous, remove it. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 12 Feb, 2018 25 commits
-
-
Hannes Reinecke authored
Not a real RAID level, but some HBAs support JBOD in addition to the 'classical' RAID levels. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Bring the kernel-doc headers in sync with the function argument lists. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
This patch does not change any functionality but slightly reduces the size of the compiled kernel module. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Remove a few preprocessor macros that are not used anywhere. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Remove a few preprocessor macros that are not used anywhere. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Using %p instead of %lx to print a pointer allows to remove a cast. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Updated Copyright in files updated 11.4.0.7 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Update the driver version to 11.4.0.7 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
In a test that is doing large numbers of cable swaps on the target, the nvme controllers wouldn't reconnect. During the cable swaps, the targets n_port_id would change. This information was passed to the nvme-fc transport, in the new remoteport registration. However, the nvme-fc transport didn't update the n_port_id value in the remoteport struct when it reused an existing structure. Later, when a new association was attempted on the remoteport, the driver's NVME LS routine would use the stale n_port_id from the remoteport struct to address the LS. As the device is no longer at that address, the LS would go into never never land. Separately, the nvme-fc transport will be corrected to update the n_port_id value on a re-registration. However, for now, there's no reason to use the transports values. The private pointer points to the drivers node structure and the node structure is up to date. Therefore, revise the LS routine to use the drivers data structures for the LS. Augmented the debug message for better debugging in the future. Also removed a duplicate if check that seems to have slipped in. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Currently, write underruns (mismatch of amount transferred vs scsi status and its residual) detected by the adapter are not being flagged as an error. Its expected the target controls the data transfer and would appropriately set the RSP values. Only read underruns are treated as errors. Revise the SCSI error handling to treat write underruns as an error as well. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
The driver was inappropriately pulling in the nvme host's nvme.h header. What it really needed was the standard <linux/nvme.h> header. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
When using the special option to suppress the response iu, ensure the adapter fully supports the feature by checking feature flags from the adapter and validating the support when formatting the WQE. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
During SCSI error handling escalation to host reset, the SCSI io routines were moved off the txcmplq, but the individual io's ON_CMPLQ flag wasn't cleared. Thus, a background thread saw the io and attempted to access it as if on the txcmplq. Clear the flag upon removal. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Revise the NVME PRLI to indicate CONF support. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
The driver ignored checks on whether the link should be kept administratively down after a link bounce. Correct the checks. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Make the attribute writeable. Remove the ramp up to logic as its unnecessary, simply set depth. Add debug message if depth changed, possibly reducing limit, yet our outstanding count has yet to catch up with it. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
When nvme target deferred receive logic waits for exchange resources, the corresponding receive buffer is not replenished with the hardware. This can result in a lack of asynchronous receive buffer resources in the hardware, resulting in a "2885 Port Status Event: ... error 1=0x52004a01 ..." message. Correct by replenishing the buffer whenenver the deferred logic kicks in. Update corresponding debug messages and statistics as well. [mkp: applied by hand] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
A stress test repeatedly resetting the adapter while performing io would eventually report I/O failures and missing nvme namespaces. The driver was setting the nvmefc_fcp_req->private pointer to NULL during the IO completion routine before upcalling done(). If the transport was also running an abort for that IO, the driver would fail the abort with message 6140. Failing the abort is not allowed by the nvme-fc transport, as it mandates that the io must be returned back to the transport. As that does not happen, the transport controller delete has an outstanding reference and can't complete teardown. The NULL-ing of the private pointer should be done only when the io is considered complete. It's complete when the adapter returns the exchange with the "exchange busy" flag clear. Move the NULL'ing of the structure to the done case. This leaves the io contexts set while it is busy and until the subsequent XRI_ABORTED completion which returns the exchange is received. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
The lpfc driver does not discover a target when the topology changes from switched-fabric to direct-connect. The target rejects the PRLI from the initiator in direct-connect as the driver is using the old S_ID from the switched topology. The driver was inappropriately clearing the VP bit to register the VPI, which is what is associated with the S_ID. Fix by leaving the VP bit set (it was set earlier) and as the VFI is being re-registered, set the UPDT bit. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
I/O conditions on the nvme target may have the driver submitting to a full hardware wq. The hardware wq is a shared resource among all nvme controllers. When the driver hit a full wq, it failed the io posting back to the nvme-fc transport, which then escalated it into errors. Correct by maintaining a sideband queue within the driver that is added to when the WQ full condition is hit, and drained from as soon as new WQ space opens up. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Existing code was using the wrong field for the completion status when comparing whether to increment abort statistics Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Ensure nvme localports/targetports are torn down before dismantling the adapter sli interface on driver detachment. This aids leaving interfaces live while nvme may be making callbacks to abort it. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Increased CQ and WQ sizes for SCSI FCP, matching those used for NVMe development. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 11 Feb, 2018 6 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-