- 08 Feb, 2022 12 commits
-
-
Thomas Zimmermann authored
Move encoder and connector initialization into a single helper and put all related mode-setting structures into a single place. Done in preparation of moving transmitter code into separate helpers. No functional changes. v2: * move encoder CRTC bitmask fix into separate patch (Javier) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
Prepare for introducing other connectors besides VGA. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Remove reading the link-rate. The value is maintained by the connector code but never used. Signed-off-by:
-
Thomas Zimmermann authored
The ITE66121 is an HDMI transmitter chip. There's no code for detecting or programming the chip within ast. Remove the enum constant. Signed-off-by:
-
Thomas Zimmermann authored
The tests in ast_mode_valid() verify the correct resolution for the supplied mode. This is a limitation of the CRTC, so move the function to the CRTC helpers. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Update the connector code to fail if the connector could not be initialized. The current code just ignored the error and failed later when the connector was supposed to be used. Signed-off-by:
-
Christian König authored
Instead of manually extracting the fence. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204100429.2049-7-christian.koenig@amd.com
-
Christian König authored
It's a reoccurring pattern that we need to extract the fence from a dma_fence_chain object. Add a helper for this. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204100429.2049-6-christian.koenig@amd.com
-
Christian König authored
Drivers should not add containers as shared fences to the dma_resv object, instead each fence should be added individually. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Christian König authored
Chaining of dma_fence_chain objects is only allowed through the prev fence and not through the contained fence. Warn about that when we create a dma_fence_chain. v2: fix comment style Signed-off-by:
-
Christian König authored
It's not allowed to nest another dma_fence container into a dma_fence_array or otherwise we can run into recursion. Warn about that when we create a dma_fence_array. v2: fix comment style and typo in the warning pointed out by Thomas Signed-off-by:
-
Christian König authored
Consolidate the wrapper functions to check for dma_fence subclasses in the dma_fence header. This makes it easier to document and also check the different requirements for fence containers in the subclasses. Signed-off-by:
-
- 07 Feb, 2022 7 commits
-
-
Lucas De Marchi authored
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-11-lucas.demarchi@intel.com
-
Lucas De Marchi authored
linux/string_helpers.h provides a helper to return "yes"/"no" strings. Replace the open coded versions with str_yes_no(). The places were identified with the following semantic patch: @@ expression b; @@ - b ? "yes" : "no" + str_yes_no(b) Then the includes were added, so we include-what-we-use, and parenthesis adjusted in drivers/gpu/drm/v3d/v3d_debugfs.c. After the conversion we still see the same binary sizes: text data bss dec hex filename 51149 3295 212 54656 d580 virtio/virtio-gpu.ko.old 51149 3295 212 54656 d580 virtio/virtio-gpu.ko 1441491 60340 800 1502631 16eda7 radeon/radeon.ko.old 1441491 60340 800 1502631 16eda7 radeon/radeon.ko 6125369 328538 34000 6487907 62ff63 amd/amdgpu/amdgpu.ko.old 6125369 328538 34000 6487907 62ff63 amd/amdgpu/amdgpu.ko 411986 10490 6176 428652 68a6c drm.ko.old 411986 10490 6176 428652 68a6c drm.ko 98129 1636 264 100029 186bd dp/drm_dp_helper.ko.old 98129 1636 264 100029 186bd dp/drm_dp_helper.ko 1973432 109640 2352 2085424 1fd230 nouveau/nouveau.ko.old 1973432 109640 2352 2085424 1fd230 nouveau/nouveau.ko Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-10-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Sort includes alphabetically so it's easier to add/remove includes and know when that is needed. Signed-off-by:
-
Lucas De Marchi authored
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126093951.1470898-8-lucas.demarchi@intel.com
-
Lucas De Marchi authored
There are a few implementations of string helpers in the tree like yesno() that just returns "yes" or "no" depending on a boolean argument. Those are helpful to output strings to the user or log. In order to consolidate them, prefix all of them str_ prefix to make it clear what they are about and avoid symbol clashes. Taking the commoon `val ? "yes" : "no"` implementation, quite a few users of open coded yesno() could later be converted to the new function: $ git grep '?\s*"yes"\s*' | wc -l 286 $ git grep '?\s*"no"\s*' | wc -l 20 The inlined function should keep the const strings local to each compilation unit, the same way it's now, thus not changing the current behavior. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
-
Maarten Lankhorst authored
First backmerge into drm-misc-next. Required for more helpers backmerged, and to pull in 5.17 (rc2). Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Hans de Goede authored
Fix the following warning from "make htmldocs": drivers/gpu/drm/drm_privacy_screen.c:392: warning: Function parameter or member 'data' not described in 'drm_privacy_screen_register' Fixes: 30598d92 ("drm/privacy_screen: Add drvdata in drm_privacy_screen") Cc: Rajat Jain <rajatja@google.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220207113307.346281-1-hdegoede@redhat.com
-
- 06 Feb, 2022 2 commits
-
-
Tomohito Esaki authored
Remove allow_fb_modifiers setting in this driver. The allow_fb_modifiers flag was removed. Signed-off-by:
Tomohito Esaki <etom@igel.co.jp> Fixes: 3d082157 ("drm: remove allow_fb_modifiers") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204023635.15496-1-etom@igel.co.jp
-
Simon Ser authored
Follow-up for the DRM_IOCTL_MODE_GETFB2 docs. v2: (Daniel Stone) - Replace fourcc.org with drm_fourcc.h because this is the authoritative source and the website may have mismatches. - Drop assumption that offsets will generally be 0. - Mention that unused entries must be zero'ed out. v3: (Pekka) - Mention that a handle can be re-used - Add unit for pitches/offsets Signed-off-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220203133753.261507-1-contact@emersion.fr
-
- 04 Feb, 2022 1 commit
-
-
Thomas Zimmermann authored
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select the option to fix the build failure. The error message is shown below. arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to `drm_panel_dp_aux_backlight' make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1 The issue has been reported before, when DisplayPort helpers were hidden behind the option CONFIG_DRM_KMS_HELPER. [2] v2: * fix and expand commit description (Arnd) Signed-off-by:Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
-
- 03 Feb, 2022 3 commits
-
-
Lucas De Marchi authored
Only x86 and in some cases PPC have support added in drm_cache.c for the clflush class of functions. However warning once is sufficient to taint the log instead of spamming it with "Architecture has no drm_cache.c support" every few millisecond. Switch to WARN_ONCE() so we still get the log message, but only once, together with the warning. E.g: ------------[ cut here ]------------ Architecture has no drm_cache.c support WARNING: CPU: 80 PID: 888 at drivers/gpu/drm/drm_cache.c:139 drm_clflush_sg+0x40/0x50 [drm] ... v2 (Jani): use WARN_ONCE() and keep the message previously on pr_err() Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-2-lucas.demarchi@intel.com
-
Maxime Ripard authored
Commit 4adc33f3 ("drm/edid: Split deep color modes between RGB and YUV444") introduced two new variables in struct drm_display_info and their documentation, but the documentation part had a typo resulting in a doc build warning. Fixes: 4adc33f3 ("drm/edid: Split deep color modes between RGB and YUV444") Reported-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
-
Alexander Stein authored
Use the dev_err_probe() helper, instead of open-coding the same operation. This also adds a nice hint in /sys/kernel/debug/devices_deferred. Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
- 02 Feb, 2022 6 commits
-
-
Christian König authored
Decomposing fence containers don't seem to make any sense here. So just remove the function entirely and call dma_fence_wait() directly. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124130328.2376-12-christian.koenig@amd.com
-
Maxime Ripard authored
Following the previous patch, let's introduce a generic panel-lvds binding that documents the panels that don't have any particular constraint documented. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Ripard authored
The lvds.yaml file so far was both defining the generic LVDS properties (such as data-mapping) that could be used for any LVDS sink, but also the panel-lvds binding. That last binding was to describe LVDS panels simple enough, and had a number of other bindings using it as a base to specialise it further. However, this situation makes it fairly hard to extend and reuse both the generic parts, and the panel-lvds itself. Let's remove the panel-lvds parts and leave only the generic LVDS properties. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Maxime Ripard authored
When we have the entire DRM state, retrieving the connector state only requires the drm_connector pointer. Fortunately for us, we have allocated it as a part of the vc4_hdmi structure, so we can retrieve get a pointer by simply accessing our field in that structure. Signed-off-by:
-
Maxime Ripard authored
Even though we have the other drm_display_info fields reset, the DC modes are missing. This shouldn't be an issue since it's explicitly reset every time a new EDID is parsed. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Thomas Zimmermann authored
Mark screen buffers in system memory with FBINFO_VIRTFB. Otherwise, fbdev deferred I/O marks mmap'ed areas of system memory with VM_IO. (There's an inverse relationship between the two flags.) For shadow buffers, also set the FBINFO_READS_FAST hint. v3: * change FB_ to FBINFO_ in commit description v2: * updated commit description (Daniel) * added Fixes tag Signed-off-by:
-
- 01 Feb, 2022 5 commits
-
-
Douglas Anderson authored
This reverts commit 363c4c38. Since the point of this attribute is for a test, this should be done in debugfs, not sysfs. Let's revert and a new patch can be added later doing it in debugfs. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Douglas Anderson authored
Recently we added generic "edp-panel"s probed by EDID. To support panels in this way we look at the panel ID in the EDID and look up the panel in a table that has power sequence timings. If we find a panel that's not in the table we will still attempt to use it but we'll use conservative timings. While it's likely that these conservative timings will work for most nearly all panels, the performance of turning the panel off and on suffers. We'd like to be able to reliably detect the case that we're using the hardcoded timings without relying on parsing dmesg. This allows us to implement tests that ensure that no devices get shipped that are relying on the conservative timings. Let's add a new sysfs entry to panel devices. It will have one of: * UNKNOWN - We tried to detect a panel but it wasn't in our table. * HARDCODED - We're not using generic "edp-panel" probed by EDID. * A panel name - This is the name of the panel from our table. Signed-off-by:
-
Allen Chen authored
This adds support for the iTE IT6505. This device can convert DPI signal to DP output. From: Allen Chen <allen.chen@ite.com.tw> Tested-by:
Hsin-yi Wang <hsinyi@chromium.org> Signed-off-by:
Hermes Wu <hermes.wu@ite.com.tw> Signed-off-by:
Allen Chen <allen.chen@ite.com.tw> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
-
Yongzhi Liu authored
[why] Unlock is needed on the error handling path to prevent dead lock. v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock. [how] Fix this by changing goto target on the error handling path. So changing the goto to target an error handling path that includes drm_gem_unlock reservations. Signed-off-by:
Yongzhi Liu <lyz_cs@pku.edu.cn> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
[airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
-
- 31 Jan, 2022 4 commits
-
-
Daniel Vetter authored
Hammer it a bit more in that iterators can be restarted and when that matters, plus suggest to prefer the locked version whenver. Also delete the two leftover kerneldoc for static functions plus sprinkle some more links while at it. v2: Keep some comments (Christian) Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20211130152756.1388106-1-daniel.vetter@ffwll.ch
-
Tomohito Esaki authored
The allow_fb_modifiers flag is unnecessary since it has been replaced with fb_modifiers_not_supported flag. v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag v5: - keep a sanity check in plane init func Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Tomohito Esaki authored
The LINEAR modifier is advertised as default if a driver doesn't specify modifiers. v2: - rebase to the latest master branch (5.16.0+) + "drm/plane: Make format_mod_supported truly optional" patch [1] [1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3 v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag v5: - change default_modifiers array from non-static to static - remove terminator in default_modifiers array - use ARRAY_SIZE to get the format_modifier_count - update sanity check in plane init func to use the fb_modifiers_not_supported - modify kernel docs Signed-off-by: -
Tomohito Esaki authored
If only linear modifier is advertised, since there are many drivers that only linear supported, the DRM core should handle this rather than open-coding in every driver. However, there are legacy drivers such as radeon that do not support modifiers but infer the actual layout of the underlying buffer. Therefore, a new flag fb_modifiers_not_supported is introduced for these legacy drivers, and allow_fb_modifiers is replaced with this new flag. v3: - change the order as follows: 1. add fb_modifiers_not_supported flag 2. add default modifiers 3. remove allow_fb_modifiers flag - add a conditional disable in amdgpu_dm_plane_init() v4: - modify kernel docs v5: - modify kernel docs Signed-off-by:
-
