- 14 Aug, 2008 29 commits
-
-
Lex Ross authored
Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based). PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones. PIDs were missing. Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b) Signed-off-by: Lex V. Ross <lross@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Siewior authored
According to Alan Stern, short packets are quite normal under certain circumstances. This printk was triggered by usb to serial converters on every packet and some usb sticks triggered a few of those while plugging the stick. This printks are now hidden unless USB debug mode is activated. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Enrico Scholz authored
ISP1760 requires a delay of 90ns between programming the address and reading the data. Current driver solves this by a mdelay(1) which is very heavy weighted and slow. This patch applies the workaround from the ISP1760 FAQ by using two different banks for PTD and payload data and using a common wait for them. This wait is done by an additional ISP1760 access (whose timing constraints guarantee the 90ns delay). This improves speed when reading from an USB stick from: $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 1m 15.43s user 0m 0.44s sys 0m 39.46s to $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 0m 18.53s user 0m 0.16s sys 0m 12.97s [bigeasy@linutronix.de: fixed comment formating, moved define into header file, obey 80 char rule] Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sebastian Siewior authored
if the enqueue function returns -ESHUTDOWN or -ENOMEM then we return 0 instead of an error. This leads to a timeout and then to a dequeue request of an not enqueued urb. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Update RX path handling in new serial gadget code to cope better with RX blockage: queue every RX packet until its contents can safely be passed up to the ldisc. Most of the RX path work is now done in the RX tasklet, instead of just the final "push to ldisc" step. This addresses some cases of data loss: - A longstanding serial gadget bug: when tty_insert_flip_string() didn't copy the entire buffer, the rest of the characters were dropped! Now that packet stays queued until the rest of its data is pushed to the ldisc. - Another longstanding issue: in the unlikely case that an RX transfer returns data and also reports a fault, that data is no longer discarded. - In the recently added RX throttling logic: it needs to stop pushing data into the TTY layer, instead of just not submitting new USB read requests. When the TTY is throttled long enough, backpressure will eventually make the OUT endpoint NAK. Also: an #ifdef is removed (no longer necessary); and start switching to a better convention for debug messages (prefix them with tty name). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Baryshkov authored
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
this mentions a new deadlock due to advanced power management. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Simon Arlott authored
"#%x" should have been "%#x" Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jost Diederichs authored
add razr v3xx US_FL_FIX_CAPACITY flag to unusual_devs.h in usb-storage This is another Motorola phone that incorrectly reports the sector count (off by one). Problem Description: io errors when mounting phone's sd-card via the phones usb port Steps to reproduce: mount Motorola Razr v3xx phones sd-card on Linux Desktop via usb cable. Phones USB port must be in memory card mode. DEBUG output: Jul 9 19:32:41 micky kernel: Buffer I/O error on device sdd, logical block 3970048 Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Sense Key : Medium Error [current] Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Add. Sense: No additional sense information Jul 9 19:32:41 micky kernel: end_request: I/O error, dev sdd, sector 3970048 From: Jost Diederichs <jost@qdusa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin Lloyd authored
This patch upgrades the support for the Sierra Wireless TRU-Install feature (i.e. zeroCD) to allow for future support of Linux enabled TRU-Install devices. By default all devices that do not have a Linux enabled TRU-Install device (i.e. the device does not have a Linux package on the virtual CD partition) will be switched into "modem mode." Devices that do contain a Linux package in the TRU-Install virtual CD will be allowed to enumerate as a CD-Rom so that either (a) a user can install the packaged software or (b) a user-space application (e.g. udev) can switch it to modem mode. This patch does allow for manual override by adding a usb-storage module parameter 'swi_tru_install' which can force the modem into either mode regardless of what packages it contains. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin Lloyd authored
Moves responsbility of TRU-Install (i.e. ZeroCD) to the usb-storage driver. See patch 04/04 of this set. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin Lloyd authored
This patch changes the method by which the number of ports per interface is assigned so that it is more dynamic and calculated on the fly (as opposed to hard coding it). This will allow for faster and easier addition of products. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin Lloyd authored
Very minor changes to clean up sierra code. Adds a prefix to debug messages so that Sierra messages are easily recognized. Removes extraneous code. This targets kernel 2.6.26-rc9 Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tollef Fog Heen authored
USB ID 4348:5523 is handled by the ch341 driver. Remove it from the pl2023 driver. Reverts 002e8f2c. Signed-off-by: Tollef Fog Heen <tfheen@err.no> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1115) adds unusual_devs entries with the IGNORE_RESIDE flag for the iRiver T10 and the Simple Tech/Datafab CF+SM card reader. Apparently these devices provide reasonable residue values for READ and WRITE operations, but not for others like INQUIRY or READ CAPACITY. This fixes the iRiver T10 problem reported in Bugzilla #11125. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Simon Arlott authored
This makes "USB Monitor" appear under "Miscellaneous USB options" section instead of in the middle of device specific drivers in the "USB Imaging devices" section. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1119) will help to reduce the clutter of usb-storage's unusual_devs file by automatically detecting some devices that need the IGNORE_RESIDUE flag. The idea is that devices should never return a non-zero residue for an INQUIRY or a READ CAPACITY command unless they failed to transfer all the requested data. So if one of these commands transfers a standard amount of data but there is a positive residue, we know that the residue is bogus and we can set the flag. This fixes the problems reported in Bugzilla #11125. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1122) fixes a bug: When an interface is unregistered, its children (sysfs files and endpoint devices) are unregistered after it instead of before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1121) fixes a bug in the USB serial core. When a device is unregistered, the core will give back its minors -- even if the device hasn't been assigned any! The patch reserves the highest minor value (255) to mean that no minor was assigned. It also removes some dead code and does a small style fixup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
Without it, we might have trouble when trying to write some composite gadget drivers. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dave Jones authored
usb-storage: quirk around v1.11 firmware on Nikon D40 https://bugzilla.redhat.com/show_bug.cgi?id=454028 Just as in earlier firmware versions, we need to perform this quirk for the latest version too. Speculatively do the entry for the D80 too, as they seem to have the same firmware problems historically. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1114) fixes a problem that was revealed by an earlier patch (as1069b). Some broken controllers seem never to turn off their RHCS interrupt status bit, even when told to do so. As a result they generate an interrupt storm and hang the system. The patch avoids enabling RHSC interrupt requests when the RHCS status bit is already set. This should have no adverse affects on normal controllers, since they won't set the status bit until a root-hub status change actually occurs, in which case we wouldn't enable RHSC interrupt requests anyway -- we would wait until the status change had been processed and cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alexander Beregalov authored
usb/core/driver: fix warning: drivers/usb/core/driver.c:834: warning: 'do_unbind_rebind' defined but not used Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1117) adds a kerneldoc line for the "needs_binding" field in struct usb_interface. It was accidentally omitted when the field was added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Frederik Kriewitz authored
The Patch adds support for Luminance Stellaris Evaluation/Development Kits (FTDI 2232C based). The PIDs were missing. Successfully tested with a Stellaris LM3S8962 Evaluation kit. Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
André Schenk authored
USB product id registration for the ELV HS485 USB adapter (www.elv.de) to their home automation bus system. Applies to 2.6.26. Signed-off-by: Andre Schenk <andre@melior.s.bawue.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
USB: fix USB boot crash, ecm_do_notify(), list_add corruption. prev->next should be next (ffff88003b8f82f8) This fixes a BUG() turned up by Ingo via randconfig testing, where CONFIG_LIST_DEBUG turned up list corruption. The corruption was caused by the dummy_hcd (single-machine test harness for gadget and HCD code) trashing the request queue when driven by the new CDC composite gadget an I/O pattern that was previously uncommon. Fix suggested by Alan Stern. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Wolfgang Mües authored
This patch removes the auerswald USB driver from the linux kernel 2.6.26. This driver was included into the kernel mainly to connect to the ISDN framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile and moving ISDN support, this connection was never realized, and the only use of this driver was for device configuration. In the age of DSL, the demand of ISDN support is getting very low. Meanwhile, with the advent of libusb, an userspace driver was done for the device configuration which works fine for linux and mac. (Thanks to the libusb developers!). The userspace driver is downloadable from the auerswald web site. So this driver is obsolete now and has to be removed. Many thanks to all developers which helped me to bring this driver up and working. Signed-off-by: Wolfgang Muees <wolfgang@iksw-muees.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 13 Aug, 2008 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore() crypto: hash - Add missing top-level functions crypto: hash - Fix digest size check for digest type crypto: tcrypt - Fix AEAD chunk testing crypto: talitos - Add handling for SEC 3.x treatment of link table
-
git://oss.sgi.com:8090/xfs/linux-2.6Linus Torvalds authored
* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits) [XFS] Fix use after free in xfs_log_done(). [XFS] Make xfs_bmap_*_count_leaves void. [XFS] Use KM_NOFS for debug trace buffers [XFS] use KM_MAYFAIL in xfs_mountfs [XFS] refactor xfs_mount_free [XFS] don't call xfs_freesb from xfs_unmountfs [XFS] xfs_unmountfs should return void [XFS] cleanup xfs_mountfs [XFS] move root inode IRELE into xfs_unmountfs [XFS] stop using file_update_time [XFS] optimize xfs_ichgtime [XFS] update timestamp in xfs_ialloc manually [XFS] remove the sema_t from XFS. [XFS] replace dquot flush semaphore with a completion [XFS] replace inode flush semaphore with a completion [XFS] extend completions to provide XFS object flush requirements [XFS] replace the XFS buf iodone semaphore with a completion [XFS] clean up stale references to semaphores [XFS] use get_unaligned_* helpers [XFS] Fix compile failure in xfs_buf_trace() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: rename structs dlm: add missing kfrees
-
Linus Torvalds authored
Done as a script (well, a single "git mv" actually) on request from Yoshinori Sato as a way to avoid a huge diff. Requested-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Teigland authored
Add a dlm_ prefix to the struct names in config.c. This resolves a conflict with struct node in particular, when include/linux/node.h happens to be included. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Teigland <teigland@redhat.com>
-
David Teigland authored
A couple of unlikely error conditions were missing a kfree on the error exit path. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: David Teigland <teigland@redhat.com>
-
Suresh Siddha authored
Wolfgang Walter reported this oops on his via C3 using padlock for AES-encryption: ################################################################## BUG: unable to handle kernel NULL pointer dereference at 000001f0 IP: [<c01028c5>] __switch_to+0x30/0x117 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: Pid: 2071, comm: sleep Not tainted (2.6.26 #11) EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0 EIP is at __switch_to+0x30/0x117 EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300 ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000) Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046 c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000 c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0 Call Trace: [<c03b5b43>] ? schedule+0x285/0x2ff [<c0131856>] ? pm_qos_requirement+0x3c/0x53 [<c0239f54>] ? acpi_processor_idle+0x0/0x434 [<c01025fe>] ? cpu_idle+0x73/0x7f [<c03a4dcd>] ? rest_init+0x61/0x63 ======================= Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end() around the padlock instructions fix the oops. Suresh wrote: These padlock instructions though don't use/touch SSE registers, but it behaves similar to other SSE instructions. For example, it might cause DNA faults when cr0.ts is set. While this is a spurious DNA trap, it might cause oops with the recent fpu code changes. This is the code sequence that is probably causing this problem: a) new app is getting exec'd and it is somewhere in between start_thread() and flush_old_exec() in the load_xyz_binary() b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is cleared. c) Now we get an interrupt/softirq which starts using these encrypt/decrypt routines in the network stack. This generates a math fault (as cr0.ts is '1') which sets TS_USEDFPU and restores the math that is in the task's xstate. d) Return to exec code path, which does start_thread() which does free_thread_xstate() and sets xstate pointer to NULL while the TS_USEDFPU is still set. e) At the next context switch from the new exec'd task to another task, we have a scenarios where TS_USEDFPU is set but xstate pointer is null. This can cause an oops during unlazy_fpu() in __switch_to() Now: 1) This should happen with or with out pre-emption. Viro also encountered similar problem with out CONFIG_PREEMPT. 2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because kernel_fpu_begin() will manually do a clts() and won't run in to the situation of setting TS_USEDFPU in step "c" above. 3) This was working before the fpu changes, because its a spurious math fault which doesn't corrupt any fpu/sse registers and the task's math state was always in an allocated state. With out the recent lazy fpu allocation changes, while we don't see oops, there is a possible race still present in older kernels(for example, while kernel is using kernel_fpu_begin() in some optimized clear/copy page and an interrupt/softirq happens which uses these padlock instructions generating DNA fault). This is the failing scenario that existed even before the lazy fpu allocation changes: 0. CPU's TS flag is set 1. kernel using FPU in some optimized copy routine and while doing kernel_fpu_begin() takes an interrupt just before doing clts() 2. Takes an interrupt and ipsec uses padlock instruction. And we take a DNA fault as TS flag is still set. 3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts 4. We complete the padlock routine 5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes the optimized copy routine and does kernel_fpu_end(). At this point, we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll set and not cleared. 6. Now kernel resumes its user operation. And at the next context switch, kernel sees it has do a FP save as TS_USEDFPU is still set and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu() will take a DNA fault, as cr0.ts is '1' and now, because we are in __switch_to(), math_state_restore() will get confused and will restore the next task's FP state and will save it in prev tasks's FP state. Remember, in __switch_to() we are already on the stack of the next task but take a DNA fault for the prev task. This causes the fpu leakage. Fix the padlock instruction usage by calling them inside the context of new routines irq_ts_save/restore(), which clear/restore cr0.ts manually in the interrupt context. This will not generate spurious DNA in the context of the interrupt which will fix the oops encountered and the possible FPU leakage issue. Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
The top-level functions init/update/final were missing for ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
The changeset ca786dc7 crypto: hash - Fixed digest size check missed one spot for the digest type. This patch corrects that error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
My changeset 4b22f0dd crypto: tcrpyt - Remove unnecessary kmap/kunmap calls introduced a typo that broke AEAD chunk testing. In particular, axbuf should really be xbuf. There is also an issue with testing the last segment when encrypting. The additional part produced by AEAD wasn't tested. Similarly, on decryption the additional part of the AEAD input is mistaken for corruption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Lee Nipper authored
Later SEC revision requires the link table (used for scatter/gather) to have an extra entry to account for the total length in descriptor [4], which contains cipher Input and ICV. This only applies to decrypt, not encrypt. Without this change, on 837x, a gather return/length error results when a decryption uses a link table to gather the fragments. This is observed by doing a ping with size of 1447 or larger with AES, or a ping with size 1455 or larger with 3des. So, add check for SEC compatible "fsl,3.0" for using extra link table entry. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-