We used to get MMU hashtable entries which weren't associated
with any current process.  Since the low-level PPC MM code no
longer does this, there is no use counting these entries, since
there are never any of them.

The tags were slightly useful when the kernel maintainers weren't
using BK, but these days they are more trouble than they are worth.
They tend to cause patch rejects, and often end up getting turned
into the fixed form (rather than the %x% tag form).

into home.transmeta.com:/home/torvalds/v2.5/linux

This gets rid of ide_request/free_irq, ide_get/release_lock,
ide_check/request/release_region etc.

There is a perfectly good one in drivers/ide/ide-iops.c now.

and add exit_group to the syscall table.

into samba.org:/home/paulus/kernel/for-linus-ppc

The broadcast SIGKILL kept pending in the new thread as well, and killed
it prematurely ...

This implements one of the last missing POSIX threading details - exec()
semantics.  Previous kernels had code that tried to handle it, but that
code had a number of disadvantages:

 - it only worked if the exec()-ing thread was the thread group leader,
   creating an assymetry. This does not work if the thread group leader
   has exited already.

 - it was racy: it sent a SIGKILL to every thread in the group but did not
   wait for them to actually process the SIGKILL. It did a yield() but
   that is not enough. All 'other' threads have to finish processing
   before we can continue with the exec().

This adds the same logic, but extended with the following enhancements:

 - works from non-leader threads just as much as the thread group leader.

 - waits for all other threads to exit before continuing with the exec().

 - reuses the PID of the group.

It would perhaps be a more generic approach to add a new syscall,
sys_ungroup() - which would do largely what de_thread() does in this
patch.

But it's not really needed now - posix_spawn() is currently implemented
via starting a non-CLONE_THREAD helper thread that does a sys_exec().
There's no API currently that needs a direct exec() from a thread - but
it could be created (such as pthread_exec_np()).  It would have the
advantage of not having to go through a helper thread, but the
difference is minimal.

This fixes one more exit-time resource accounting issue - and it's also
a speedup and a thread-tree (to-be thread-aware pstree) visual
improvement.

In the current code we reparent detached threads to the init thread.
This worked but was not very nice in ps output: threads showed up as
being related to init.  There was also a resource-accounting issue, upon
exit they update their parent's (ie.  init's) rusage fields -
effectively losing these statistics.  Eg.  'time' under-reports CPU
usage if the threaded app is Ctrl-C-ed prematurely.

The solution is to reparent threads to the group leader - this is now
very easy since we have p->group_leader cached and it's also valid all
the time.  It's also somewhat faster for applications that use
CLONE_THREAD but do not use the CLONE_DETACHED feature.

This fixes a number of bugs that broke ptrace:

 - wait4 must not inhibit TASK_STOPPED processes even for thread group
   leaders.

 - do_notify_parent() should not delay the notification of parents if
   the thread in question is ptraced.

strace now works as expected for CLONE_THREAD applications as well.

This optimizes sys_exit_group() to only take the siglock if it's a true
thread group.  Boots & works fine.

This fixes three resource accounting related bugs introduced by detached
threads:

 - the 'child CPU usage' fields were updated in wait4 until now - this was
   slightly buggy for a number of reasons, eg. if the exit_code writout
   faults then it's possible to trigger this code multiple times.

 - those threads that do not go through wait4 were not properly accounted.

 - sched_exit() was incorrectly assuming that current == parent. In the
   detached case p->parent is the real parent.

with this patch applied things like 'time' work again for new-style
threaded apps.

This fixes a clone-flags bug noticed by Roland McGrath.  The current
CLONE_DETACHED & CLONE_THREAD forcing code did things in the wrong
order, which makes it possible to force an oops the following way:

        main () { syscall(120, 0x00400000); }

instead of changing the order of CLONE_SIGHAND and CLONE_THREAD flag
forcing (which would fix the bug), the proper approach is to fail with
-EINVAL if invalid combinations of clone flags are detected.  This
change does not affect existing applications.

the attached patch (against BK-curr) fixes a sys_wait4() bug noticed by
Ulrich Drepper. The kernel would not block properly if there are eligible
children delayed due to the new delayed thread-group-leader logic. The
solution is to introduce a new type of 'eligible child' type - and skip
over delayed children but set the wait4 flag nevertheless.

The libpthreads testcase that failed due to it now it works fine.

into samba.org:/home/paulus/kernel/for-linus-ppc

into samba.org:/home/paulus/kernel/for-linus-ppc

 - HT CPU's can share the MTRR state between cores
 - the code uses static variables that are shared

into home.transmeta.com:/home/torvalds/v2.5/linux

I fixed up the 'remove thread group inferiors from the tasklist' patch. I
think i managed to find a reasonably good construct to iterate over all
threads:

	do_each_thread(g, p) {
		...
	} while_each_thread(g, p);

the only caveat with this is that the construct suggests a single-loop -
while it's two loops internally - and 'break' will not work. I added a
comment to sched.h that warns about this, but perhaps it would help more
to have naming that suggests two loops:

	for_each_process_do_each_thread(g, p) {
		...
	} while_each_thread(g, p);

but this looks a bit too long. I dont know. We might as well use it all
unrolled and no helper macros - although with the above construct it's
pretty straightforward to iterate over all threads in the system.

This fixes endless loop without schedule which happens as soon as smbd
invokes fcntl64(7, F_SETLK64, ...).  fcntl_setlk64 gets cmd F_SETLK64,
not F_SETLK tested in the loop;

Maybe return value from posix_lock_file should be changed to -EINPROGRESS
or -EJUKEBOX instead of testing passed cmd in callers, but this oneliner
works too. If you preffer changing posix_lock_file return value to clearly
distinugish between -EAGAIN and lock request queued, I'll do that.

On 13 Sep 2002, Paul Larson wrote:
>
> The nightly LTP test against the 2.5 kernel bk tree last night turned up
> some test failures we don't normally see.  These failures did not show
> up in the run from the previous night.

[...]
> I found what was breaking this, looks like it was this change from your
> shared thread signals patch:
> -	if (sig < 1 || sig > _NSIG ||
> -	    (act && (sig == SIGKILL || sig == SIGSTOP)))
> +	if (sig < 1 || sig > _NSIG || (act && sig_kernel_only(sig)))

This fixes this bug and a number of others in the same class - the
signal behavior bitmasks should never be consulted before making sure
that the signal is in the word range.

This fixes the Mozilla SMP lockup in the exit path.

The partition changes shifted a lot of indexes down one, but this one
shouldn't have been shifted...

into au1.ibm.com:/home/paulus/kernel/for-linus-ppc

. No need for the timer_running member on llc_timer,
  we only need it in one place, and timer_pending is
  equivalent. One more procom OS generalisation killed.
. Move the skb->protocol assignment in llc_build_and_send_pkt
  routines and llc_ui_send_data to the caller, this is the common
  practice in Linux networking code (think netif_rx) and required
  to keep the request functions in psnap and p8022 simple.
. Remove the rpt_status (report status) ev members, not
  used at all, not even in the original procom code.
. Convert psnap and p8022 request functions to use
  llc_ui_build_and_send_ui_pkt, removing all the prim cruft.

This adds support for synchronous iocbs and converts generic_file_read
to use a sync iocb to call into generic_file_aio_read.

The tests I've run with lmbench on a piii-866 showed no difference in
file re-read speed when forced to use a completion path via aio_complete
and an -EIOCBQUEUED return from generic_file_aio_read -- people with
slower machines might want to test this to see if we can tune it any
better.  Also, a bug fix to correct a missing call into the aio code
from the fork code is present.  This patch sets things up for making
generic_file_aio_read actually asynchronous.

This is Janet Morgan's patch which converts the readv/writev code
to submit all segments for IO before waiting on them, rather than
submitting each segment separately.

This is a critical performance fix for O_DIRECT reads and writes.
Prior to this change, O_DIRECT vectored IO was forced to wait for
completion against each segment of the iovec rather than submitting all
segments and waiting on the lot.  ie: for ten segments, this code will
be ten times faster.

There will also be moderate improvements for buffered IO - smaller code
paths, plus writev() only takes i_sem once.

The patch ended up quite large unfortunately - turned out that the only
sane way to implement this without duplicating significant amounts of
code (the generic_file_write() bounds checking, all the O_DIRECT
handling, etc) was to redo generic_file_read() and generic_file_write()
to take an iovec/nr_segs pair rather than `buf, count'.

New exported functions generic_file_readv() and generic_file_writev()
have been added:

ssize_t generic_file_readv(struct file *filp, const struct iovec *iov,
                          unsigned long nr_segs, loff_t *ppos);
ssize_t generic_file_writev(struct file *file, const struct iovec *iov,
                          unsigned long nr_segs, loff_t * ppos);

If a driver does not use these in their file_operations then they will
continue to use the old readv/writev code, which sits in a loop calling
calls fops->read() or fops->write().

ext2, ext3, JFS and the blockdev driver are currently using this
capability.

Some coding cleanups were made in fs/read_write.c.  Mainly:

- pass "READ" or "WRITE" around to indicate the diretion of the
  operation, rather than the (confusing, inverted)
  VERIFY_READ/VERIFY_WRITE.

- Use the identifier `nr_segs' everywhere to indicate the iovec
  length rather than `count', which is often used to indicate the
  number of bytes in the syscall.  It was confusing the heck out of me.

- Some cleanups to the raw driver.

- Some additional generality in fs/direct_io.c: the core `struct dio'
  used to be a "populate-and-go" thing.  Janet has broken that up so
  you can initialise a struct dio once, then loop around feeding it
  more file segments, then wait on completion against everything.

- In a couple of places we needed to handle the situation where we
  knew, a-priori, that the user was going to get a short read or write.
  File size limit exceeded, read past i_size, etc.  We handled that by
  shortening the iovec in-place with iov_shorten().  Which is not
  particularly pretty, but neither were the alternatives.

This makes NMIs work - otherwise they go to CPU 0 only and any hard
lockup on the other CPUs will not be detected by the nmi_watchdog.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux