Skip to content

L
linux
Switch branch/tag
  1. 03 Nov, 2020 20 commits
  3. 02 Nov, 2020 7 commits
  5. 01 Nov, 2020 3 commits
    • Jakub Kicinski's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 859191b2
      Jakub Kicinski authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect netlink report logic in flowtable and genID.

2) Add a selftest to check that wireguard passes the right sk
   to ip_route_me_harder, from Jason A. Donenfeld.

3) Pass the actual sk to ip_route_me_harder(), also from Jason.

4) Missing expression validation of updates via nft --check.

5) Update byte and packet counters regardless of whether they
   match, from Stefano Brivio.
====================
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      859191b2
    • wenxu's avatar
      ip_tunnel: fix over-mtu packet send fail without TUNNEL_DONT_FRAGMENT flags · 20149e9e
      wenxu authored 
      The tunnel device such as vxlan, bareudp and geneve in the lwt mode set
the outer df only based TUNNEL_DONT_FRAGMENT.
And this was also the behavior for gre device before switching to use
ip_md_tunnel_xmit in commit 962924fa ("ip_gre: Refactor collect
metatdata mode tunnel xmit to ip_md_tunnel_xmit")

When the ip_gre in lwt mode xmit with ip_md_tunnel_xmi changed the rule and
make the discrepancy between handling of DF by different tunnels. So in the
ip_md_tunnel_xmit should follow the same rule like other tunnels.

Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel")
Signed-off-by: default avatarwenxu <wenxu@ucloud.cn>
Link: https://lore.kernel.org/r/1604028728-31100-1-git-send-email-wenxu@ucloud.cnSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      20149e9e
    • Mark Deneen's avatar
      cadence: force nonlinear buffers to be cloned · 403dc167
      Mark Deneen authored 
      In my test setup, I had a SAMA5D27 device configured with ip forwarding, and
second device with usb ethernet (r8152) sending ICMP packets.  If the packet
was larger than about 220 bytes, the SAMA5 device would "oops" with the
following trace:

kernel BUG at net/core/skbuff.c:1863!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in: xt_MASQUERADE ppp_async ppp_generic slhc iptable_nat xt_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 can_raw can bridge stp llc ipt_REJECT nf_reject_ipv4 sd_mod cdc_ether usbnet usb_storage r8152 scsi_mod mii o
ption usb_wwan usbserial micrel macb at91_sama5d2_adc phylink gpio_sama5d2_piobu m_can_platform m_can industrialio_triggered_buffer kfifo_buf of_mdio can_dev fixed_phy sdhci_of_at91 sdhci_pltfm libphy sdhci mmc_core ohci_at91 ehci_atmel o
hci_hcd iio_rescale industrialio sch_fq_codel spidev prox2_hal(O)
CPU: 0 PID: 0 Comm: swapper Tainted: G           O      5.9.1-prox2+ #1
Hardware name: Atmel SAMA5
PC is at skb_put+0x3c/0x50
LR is at macb_start_xmit+0x134/0xad0 [macb]
pc : [<c05258cc>]    lr : [<bf0ea5b8>]    psr: 20070113
sp : c0d01a60  ip : c07232c0  fp : c4250000
r10: c0d03cc8  r9 : 00000000  r8 : c0d038c0
r7 : 00000000  r6 : 00000008  r5 : c59b66c0  r4 : 0000002a
r3 : 8f659eff  r2 : c59e9eea  r1 : 00000001  r0 : c59b66c0
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c53c7d  Table: 2640c059  DAC: 00000051
Process swapper (pid: 0, stack limit = 0x75002d81)

<snipped stack>

[<c05258cc>] (skb_put) from [<bf0ea5b8>] (macb_start_xmit+0x134/0xad0 [macb])
[<bf0ea5b8>] (macb_start_xmit [macb]) from [<c053e504>] (dev_hard_start_xmit+0x90/0x11c)
[<c053e504>] (dev_hard_start_xmit) from [<c0571180>] (sch_direct_xmit+0x124/0x260)
[<c0571180>] (sch_direct_xmit) from [<c053eae4>] (__dev_queue_xmit+0x4b0/0x6d0)
[<c053eae4>] (__dev_queue_xmit) from [<c05a5650>] (ip_finish_output2+0x350/0x580)
[<c05a5650>] (ip_finish_output2) from [<c05a7e24>] (ip_output+0xb4/0x13c)
[<c05a7e24>] (ip_output) from [<c05a39d0>] (ip_forward+0x474/0x500)
[<c05a39d0>] (ip_forward) from [<c05a13d8>] (ip_sublist_rcv_finish+0x3c/0x50)
[<c05a13d8>] (ip_sublist_rcv_finish) from [<c05a19b8>] (ip_sublist_rcv+0x11c/0x188)
[<c05a19b8>] (ip_sublist_rcv) from [<c05a2494>] (ip_list_rcv+0xf8/0x124)
[<c05a2494>] (ip_list_rcv) from [<c05403c4>] (__netif_receive_skb_list_core+0x1a0/0x20c)
[<c05403c4>] (__netif_receive_skb_list_core) from [<c05405c4>] (netif_receive_skb_list_internal+0x194/0x230)
[<c05405c4>] (netif_receive_skb_list_internal) from [<c0540684>] (gro_normal_list.part.0+0x14/0x28)
[<c0540684>] (gro_normal_list.part.0) from [<c0541280>] (napi_complete_done+0x16c/0x210)
[<c0541280>] (napi_complete_done) from [<bf14c1c0>] (r8152_poll+0x684/0x708 [r8152])
[<bf14c1c0>] (r8152_poll [r8152]) from [<c0541424>] (net_rx_action+0x100/0x328)
[<c0541424>] (net_rx_action) from [<c01012ec>] (__do_softirq+0xec/0x274)
[<c01012ec>] (__do_softirq) from [<c012d6d4>] (irq_exit+0xcc/0xd0)
[<c012d6d4>] (irq_exit) from [<c0160960>] (__handle_domain_irq+0x58/0xa4)
[<c0160960>] (__handle_domain_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
Exception stack(0xc0d01ef0 to 0xc0d01f38)
1ee0:                                     00000000 0000003d 0c31f383 c0d0fa00
1f00: c0d2eb80 00000000 c0d2e630 4dad8c49 4da967b0 0000003d 0000003d 00000000
1f20: fffffff5 c0d01f40 c04e0f88 c04e0f8c 30070013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c04e0f8c>] (cpuidle_enter_state+0x7c/0x378)
[<c04e0f8c>] (cpuidle_enter_state) from [<c04e12c4>] (cpuidle_enter+0x28/0x38)
[<c04e12c4>] (cpuidle_enter) from [<c014f710>] (do_idle+0x194/0x214)
[<c014f710>] (do_idle) from [<c014fa50>] (cpu_startup_entry+0xc/0x14)
[<c014fa50>] (cpu_startup_entry) from [<c0a00dc8>] (start_kernel+0x46c/0x4a0)
Code: e580c054 8a000002 e1a00002 e8bd8070 (e7f001f2)
---[ end trace 146c8a334115490c ]---

The solution was to force nonlinear buffers to be cloned.  This was previously
reported by Klaus Doth (https://www.spinics.net/lists/netdev/msg556937.html)
but never formally submitted as a patch.

This is the third revision, hopefully the formatting is correct this time!
Suggested-by: default avatarKlaus Doth <krnl@doth.eu>
Fixes: 653e92a9 ("net: macb: add support for padding and fcs computation")
Signed-off-by: default avatarMark Deneen <mdeneen@saucontech.com>
Link: https://lore.kernel.org/r/20201030155814.622831-1-mdeneen@saucontech.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      403dc167
  7. 31 Oct, 2020 5 commits
    • Jakub Kicinski's avatar
      Merge branch 'ipv6-reply-icmp-error-if-fragment-doesn-t-contain-all-headers' · 72a41f95
      Jakub Kicinski authored 
      Hangbin Liu says:

====================
IPv6: reply ICMP error if fragment doesn't contain all headers

When our Engineer run latest IPv6 Core Conformance test, test v6LC.1.3.6:
First Fragment Doesn’t Contain All Headers[1] failed. The test purpose is to
verify that the node (Linux for example) should properly process IPv6 packets
that don’t include all the headers through the Upper-Layer header.

Based on RFC 8200, Section 4.5 Fragment Header

  -  If the first fragment does not include all headers through an
     Upper-Layer header, then that fragment should be discarded and
     an ICMP Parameter Problem, Code 3, message should be sent to
     the source of the fragment, with the Pointer field set to zero.

The first patch add a definition for ICMPv6 Parameter Problem, code 3.
The second patch add a check for the 1st fragment packet to make sure
Upper-Layer header exist.

[1] Page 68, v6LC.1.3.6: First Fragment Doesn’t Contain All Headers part A, B,
C and D at https://ipv6ready.org/docs/Core_Conformance_5_0_0.pdf
[2] My reproducer:

import sys, os
from scapy.all import *

def send_frag_dst_opt(src_ip6, dst_ip6):
    ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)

    frag_1 = IPv6ExtHdrFragment(nh = 60, m = 1)
    dst_opt = IPv6ExtHdrDestOpt(nh = 58)

    frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
    icmp_echo = ICMPv6EchoRequest(seq = 1)

    pkt_1 = ip6/frag_1/dst_opt
    pkt_2 = ip6/frag_2/icmp_echo

    send(pkt_1)
    send(pkt_2)

def send_frag_route_opt(src_ip6, dst_ip6):
    ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)

    frag_1 = IPv6ExtHdrFragment(nh = 43, m = 1)
    route_opt = IPv6ExtHdrRouting(nh = 58)

    frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
    icmp_echo = ICMPv6EchoRequest(seq = 2)

    pkt_1 = ip6/frag_1/route_opt
    pkt_2 = ip6/frag_2/icmp_echo

    send(pkt_1)
    send(pkt_2)

if __name__ == '__main__':
    src = sys.argv[1]
    dst = sys.argv[2]
    conf.iface = sys.argv[3]
    send_frag_dst_opt(src, dst)
    send_frag_route_opt(src, dst)
====================

Link: https://lore.kernel.org/r/20201027123313.3717941-1-liuhangbin@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      72a41f95
    • Hangbin Liu's avatar
      IPv6: reply ICMP error if the first fragment don't include all headers · 2efdaaaf
      Hangbin Liu authored 
      Based on RFC 8200, Section 4.5 Fragment Header:

  -  If the first fragment does not include all headers through an
     Upper-Layer header, then that fragment should be discarded and
     an ICMP Parameter Problem, Code 3, message should be sent to
     the source of the fragment, with the Pointer field set to zero.

Checking each packet header in IPv6 fast path will have performance impact,
so I put the checking in ipv6_frag_rcv().

As the packet may be any kind of L4 protocol, I only checked some common
protocols' header length and handle others by (offset + 1) > skb->len.
Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
(fragmented packet with only one fragment).

When send ICMP error message, if the 1st truncated fragment is ICMP message,
icmp6_send() will break as is_ineligible() return true. So I added a check
in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
return false.
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2efdaaaf
    • Hangbin Liu's avatar
      ICMPv6: Add ICMPv6 Parameter Problem, code 3 definition · b59e286b
      Hangbin Liu authored 
      Based on RFC7112, Section 6:

   IANA has added the following "Type 4 - Parameter Problem" message to
   the "Internet Control Message Protocol version 6 (ICMPv6) Parameters"
   registry:

      CODE     NAME/DESCRIPTION
       3       IPv6 First Fragment has incomplete IPv6 Header Chain
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b59e286b
    • Colin Ian King's avatar
      net: atm: fix update of position index in lec_seq_next · 2f71e006
      Colin Ian King authored 
      The position index in leq_seq_next is not updated when the next
entry is fetched an no more entries are available. This causes
seq_file to report the following error:

"seq_file: buggy .next function lec_seq_next [lec] did not update
 position index"

Fix this by always updating the position index.

[ Note: this is an ancient 2002 bug, the sha is from the
  tglx/history repo ]

Fixes 4aea2cbf ("[ATM]: Move lan seq_file ops to lec.c [1/3]")
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201027114925.21843-1-colin.king@canonical.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2f71e006
    • Stefano Brivio's avatar
      netfilter: ipset: Update byte and packet counters regardless of whether they match · 7d10e62c
      Stefano Brivio authored 
      In ip_set_match_extensions(), for sets with counters, we take care of
updating counters themselves by calling ip_set_update_counter(), and of
checking if the given comparison and values match, by calling
ip_set_match_counter() if needed.

However, if a given comparison on counters doesn't match the configured
values, that doesn't mean the set entry itself isn't matching.

This fix restores the behaviour we had before commit 4750005a
("netfilter: ipset: Fix "don't update counters" mode when counters used
at the matching"), without reintroducing the issue fixed there: back
then, mtype_data_match() first updated counters in any case, and then
took care of matching on counters.

Now, if the IPSET_FLAG_SKIP_COUNTER_UPDATE flag is set,
ip_set_update_counter() will anyway skip counter updates if desired.

The issue observed is illustrated by this reproducer:

  ipset create c hash:ip counters
  ipset add c 192.0.2.1
  iptables -I INPUT -m set --match-set c src --bytes-gt 800 -j DROP

if we now send packets from 192.0.2.1, bytes and packets counters
for the entry as shown by 'ipset list' are always zero, and, no
matter how many bytes we send, the rule will never match, because
counters themselves are not updated.
Reported-by: default avatarMithil Mhatre <mmhatre@redhat.com>
Fixes: 4750005a ("netfilter: ipset: Fix "don't update counters" mode when counters used at the matching")
Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
Signed-off-by: default avatarJozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      7d10e62c
  9. 30 Oct, 2020 5 commits
    • Marek Szyprowski's avatar
      net: stmmac: Fix channel lock initialization · 2b94f526
      Marek Szyprowski authored 
      Commit 0366f7e0 ("net: stmmac: add ethtool support for get/set
channels") refactored channel initialization, but during that operation,
the spinlock initialization got lost. Fix this. This fixes the following
lockdep warning:

meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 331 Comm: kworker/1:2H Not tainted 5.9.0-rc3+ #1858
Hardware name: Hardkernel ODROID-N2 (DT)
Workqueue: kblockd blk_mq_run_work_fn
Call trace:
 dump_backtrace+0x0/0x1d0
 show_stack+0x14/0x20
 dump_stack+0xe8/0x154
 register_lock_class+0x58c/0x590
 __lock_acquire+0x7c/0x1790
 lock_acquire+0xf4/0x440
 _raw_spin_lock_irqsave+0x80/0xb0
 stmmac_tx_timer+0x4c/0xb0 [stmmac]
 call_timer_fn+0xc4/0x3e8
 run_timer_softirq+0x2b8/0x6c0
 efi_header_end+0x114/0x5f8
 irq_exit+0x104/0x110
 __handle_domain_irq+0x60/0xb8
 gic_handle_irq+0x58/0xb0
 el1_irq+0xbc/0x180
 _raw_spin_unlock_irqrestore+0x48/0x90
 mmc_blk_rw_wait+0x70/0x160
 mmc_blk_mq_issue_rq+0x510/0x830
 mmc_mq_queue_rq+0x13c/0x278
 blk_mq_dispatch_rq_list+0x2a0/0x698
 __blk_mq_do_dispatch_sched+0x254/0x288
 __blk_mq_sched_dispatch_requests+0x190/0x1d8
 blk_mq_sched_dispatch_requests+0x34/0x70
 __blk_mq_run_hw_queue+0xcc/0x148
 blk_mq_run_work_fn+0x20/0x28
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x460
 kthread+0x134/0x160
 ret_from_fork+0x10/0x1c

Fixes: 0366f7e0 ("net: stmmac: add ethtool support for get/set channels")
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201029185011.4749-1-m.szyprowski@samsung.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2b94f526
    • Wong Vee Khee's avatar
      stmmac: intel: Fix kernel panic on pci probe · 785ff20b
      Wong Vee Khee authored 
      The commit "stmmac: intel: Adding ref clock 1us tic for LPI cntr"
introduced a regression which leads to the kernel panic duing loading
of the dwmac_intel module.

Move the code block after pci resources is obtained.

Fixes: b4c5f83a ("stmmac: intel: Adding ref clock 1us tic for LPI cntr")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: default avatarWong Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20201029093228.1741-1-vee.khee.wong@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      785ff20b
    • Claudiu Manoil's avatar
      gianfar: Account for Tx PTP timestamp in the skb headroom · d6a076d6
      Claudiu Manoil authored 
      When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header. This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on the second option,
using skb_realloc_headroom() to create a new skb to accommodate
PTP frames. Turns out that this method is not reliable, as
reallocation of skbs for PTP frames along with the required
overhead (skb_set_owner_w, consume_skb) is causing random
crashes in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time on the same device
(as seen in James' report).
Note that these crashes don't occur with a single TCP stream,
nor with multiple concurrent UDP streams, but only when multiple
TCP streams are run concurrently with the PTP packet flow
(doing skb reallocation).
This patch enforces the first method, by requesting enough
headroom from the stack to accommodate PTP frames, and so avoiding
skb_realloc_headroom() & co, and the crashes no longer occur.
There's no reason not to set needed_headroom to a large enough
value to accommodate PTP frames, so in this regard this patch
is a fix.
Reported-by: default avatarJames Jurack <james.jurack@ametek.com>
Fixes: bee9e58c ("gianfar:don't add FCB length to hard_header_len")
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d6a076d6
    • Claudiu Manoil's avatar
      gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP · d145c903
      Claudiu Manoil authored 
      When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header.  This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on skb_realloc_headroom()
to create new skbs to accommodate PTP frames.  Turns out that
this method is not reliable in this context at least, as
skb_realloc_headroom() for PTP frames can cause random crashes,
mostly in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time with the PTP flow
on the same device (as seen in James' report).  I also noticed
that when the system is loaded by sending multiple TCP streams,
the driver receives cloned skbs in large numbers.
skb_cow_head() instead proves to be stable in this scenario,
and not only handles cloned skbs too but it's also more efficient
and widely used in other drivers.
The commit introducing skb_realloc_headroom in the driver
goes back to 2009, commit 93c1285c
("gianfar: reallocate skb when headroom is not enough for fcb").
For practical purposes I'm referencing a newer commit (from 2012)
that brings the code to its current structure (and fixes the PTP
case).

Fixes: 9c4886e5 ("gianfar: Fix invalid TX frames returned on error queue when time stamping")
Reported-by: default avatarJames Jurack <james.jurack@ametek.com>
Suggested-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d145c903
    • Greg Ungerer's avatar
      net: fec: fix MDIO probing for some FEC hardware blocks · 1e6114f5
      Greg Ungerer authored 
      Some (apparently older) versions of the FEC hardware block do not like
the MMFR register being cleared to avoid generation of MII events at
initialization time. The action of clearing this register results in no
future MII events being generated at all on the problem block. This means
the probing of the MDIO bus will find no PHYs.

Create a quirk that can be checked at the FECs MII init time so that
the right thing is done. The quirk is set as appropriate for the FEC
hardware blocks that are known to need this.

Fixes: f166f890 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Signed-off-by: default avatarGreg Ungerer <gerg@linux-m68k.org>
Acked-by: default avatarFugang Duan <fugand.duan@nxp.com>
Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarClemens Gruber <clemens.gruber@pqgruber.com>
Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1e6114f5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7