Daniel Borkmann says:

====================
pull-request: bpf-next 2020-12-14

1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.

2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.

3) Support for finding BTF based kernel attach targets through libbpf's
   bpf_program__set_attach_target() API, from Andrii Nakryiko.

4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.

5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.

6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.

7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.

8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.

9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
   KP Singh, Jiri Olsa and various others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
  selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
  bpf: Permits pointers on stack for helper calls
  libbpf: Expose libbpf ring_buffer epoll_fd
  selftests/bpf: Add set_attach_target() API selftest for module target
  libbpf: Support modules in bpf_program__set_attach_target() API
  selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
  selftests/bpf: Drop the need for LLVM's llc
  selftests/bpf: fix bpf_testmod.ko recompilation logic
  samples/bpf: Fix possible hang in xdpsock with multiple threads
  selftests/bpf: Make selftest compilation work on clang 11
  selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
  selftests/bpf: Drop tcp-{client,server}.py from Makefile
  selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
  selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
  selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
  selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
  selftests/bpf: Xsk selftests framework
  bpf: Only provide bpf_sock_from_file with CONFIG_NET
  bpf: Return -ENOTSUPP when attaching to non-kernel BTF
  xsk: Validate socket state in xsk_recvmsg, prior touching socket members
  ...
====================

Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change bpf_iter_task.c such that pointer to map_value may appear
on the stack for bpf_seq_printf() to access. Without previous
verifier patch, the bpf_iter test will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013350.943985-1-yhs@fb.com

Currently, when checking stack memory accessed by helper calls,
for spills, only PTR_TO_BTF_ID and SCALAR_VALUE are
allowed.

Song discovered an issue where the below bpf program
  int dump_task(struct bpf_iter__task *ctx)
  {
    struct seq_file *seq = ctx->meta->seq;
    static char[] info = "abc";
    BPF_SEQ_PRINTF(seq, "%s\n", info);
    return 0;
  }
may cause a verifier failure.

The verifier output looks like:
  ; struct seq_file *seq = ctx->meta->seq;
  1: (79) r1 = *(u64 *)(r1 +0)
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  2: (18) r2 = 0xffff9054400f6000
  4: (7b) *(u64 *)(r10 -8) = r2
  5: (bf) r4 = r10
  ;
  6: (07) r4 += -8
  ; BPF_SEQ_PRINTF(seq, "%s\n", info);
  7: (18) r2 = 0xffff9054400fe000
  9: (b4) w3 = 4
  10: (b4) w5 = 8
  11: (85) call bpf_seq_printf#126
   R1_w=ptr_seq_file(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=4,imm=0)
  R3_w=inv4 R4_w=fp-8 R5_w=inv8 R10=fp0 fp-8_w=map_value
  last_idx 11 first_idx 0
  regs=8 stack=0 before 10: (b4) w5 = 8
  regs=8 stack=0 before 9: (b4) w3 = 4
  invalid indirect read from stack off -8+0 size 8

Basically, the verifier complains the map_value pointer at "fp-8" location.
To fix the issue, if env->allow_ptr_leaks is true, let us also permit
pointers on the stack to be accessible by the helper.
Reported-by: Song Liu <songliubraving@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013349.943719-1-yhs@fb.com

This provides a convenient perf ringbuf -> libbpf ringbuf migration
path for users of external polling systems. It is analogous to
perf_buffer__epoll_fd.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201214113812.305274-1-jackmanb@google.com

Add test for bpf_program__set_attach_target() API, validating it can find
kernel module fentry target.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-3-andrii@kernel.org

Support finding kernel targets in kernel modules when using
bpf_program__set_attach_target() API. This brings it up to par with what
libbpf supports when doing declarative SEC()-based target determination.

Some minor internal refactoring was needed to make sure vmlinux BTF can be
loaded before bpf_object's load phase.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-2-andrii@kernel.org

According to the X.25 documentation, there was a plan to implement
X.25-over-802.2-LLC. It never finished but left various code stubs in the
X.25 code. At this time it is unlikely that it would ever finish so it
may be better to remove those code stubs.

Also change the documentation to make it clear that this is not a ongoing
plan anymore. Change words like "will" to "could", "would", etc.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201209033346.83742-1-xie.he.0141@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On a few of our systems, I found frequent 'unshare(CLONE_NEWNET)' calls
make the number of active slab objects including 'sock_inode_cache' type
rapidly and continuously increase.  As a result, memory pressure occurs.

In more detail, I made an artificial reproducer that resembles the
workload that we found the problem and reproduce the problem faster.  It
merely repeats 'unshare(CLONE_NEWNET)' 50,000 times in a loop.  It takes
about 2 minutes.  On 40 CPU cores / 70GB DRAM machine, the available
memory continuously reduced in a fast speed (about 120MB per second,
15GB in total within the 2 minutes).  Note that the issue don't
reproduce on every machine.  On my 6 CPU cores machine, the problem
didn't reproduce.

'cleanup_net()' and 'fqdir_work_fn()' are functions that deallocate the
relevant memory objects.  They are asynchronously invoked by the work
queues and internally use 'rcu_barrier()' to ensure safe destructions.
'cleanup_net()' works in a batched maneer in a single thread worker,
while 'fqdir_work_fn()' works for each 'fqdir_exit()' call in the
'system_wq'.  Therefore, 'fqdir_work_fn()' called frequently under the
workload and made the contention for 'rcu_barrier()' high.  In more
detail, the global mutex, 'rcu_state.barrier_mutex' became the
bottleneck.

This commit avoids such contention by doing the 'rcu_barrier()' and
subsequent lightweight works in a batched manner, as similar to that of
'cleanup_net()'.  The fqdir hashtable destruction, which is done before
the 'rcu_barrier()', is still allowed to run in parallel for fast
processing, but this commit makes it to use a dedicated work queue
instead of the 'system_wq', to make sure that the number of threads is
bounded.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201211112405.31158-1-sjpark@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If interrupt trigger is not set when requesting the interrupt, the core
will take care of reading trigger type from Devicetree.  There is no
point to do it in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MT7530 has a global RX length register, so we are actually changing its
MRU.
Enable MTU normalization for this reason.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Acked-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2020-12-12

Just one patch this time:

1) Redact the SA keys with kernel lockdown confidentiality.
   If enabled, no secret keys are sent to uuserspace.
   From Antony Antony.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
  xfrm: redact SA secret with lockdown confidentiality
====================

Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.11

Second set of patches for v5.11. iwlwifi gaining support for the new
6 GHz band and rtw88 got a new channel. Lots of new features for mt76
and ath11k now has working suspend for PCI devices. And as always,
smaller fixes and cleanups all over.

Major changes:

rtw88
 * add support for channel 144

mt76
 * support for more sta interfaces on mt7615/mt7915
 * mt7915 encapsulation offload
 * performance improvements
 * channel noise report on mt7915
 * mt7915 testmode support
 * mt7915 DBDC support

iwlwifi
 * support 6 GHz band

ath11k
 * suspend support for QCA6390 PCI devices
 * support TXOP duration based RTS threshold
 * mesh: add support for 256 bitmap in blockack frames in 11ax

* tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits)
  ath11k: implement suspend for QCA6390 PCI devices
  ath11k: hif: add ce irq enable and disable functions
  ath11k: implement WoW enable and wakeup commands
  ath11k: set credit_update flag for flow controlled ep only
  ath11k: dp: stop rx pktlog before suspend
  ath11k: htc: implement suspend handling
  ath11k: htc: remove unused struct ath11k_htc_ops
  ath11k: pci: read select_window register to ensure write is finished
  ath11k: hif: implement suspend and resume functions
  ath11k: mhi: hook suspend and resume
  ath11k: Fix incorrect tlvs in scan start command
  ath11k: pci: disable VDD4BLOW
  ath11k: pci: fix L1ss clock unstable problem
  ath11k: pci: fix hot reset stability issues
  ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID
  ath11k: mhi: print a warning if firmware crashed
  ath11k: use MHI provided APIs to allocate and free MHI controller
  ath10k: add atomic protection for device recovery
  ath10k: add option for chip-id based BDF selection
  mt76: remove unused variable q
  ...
====================

Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
A new set of wireless changes:
 * validate key indices for key deletion
 * more preamble support in mac80211
 * various 6 GHz scan fixes/improvements
 * a common SAR power limitations API
 * various small fixes & code improvements

* tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
  mac80211: add ieee80211_set_sar_specs
  nl80211: add common API to configure SAR power limitations
  mac80211: fix a mistake check for rx_stats update
  mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc
  mac80211: Update rate control on channel change
  mac80211: don't filter out beacons once we start CSA
  mac80211: Fix calculation of minimal channel width
  mac80211: ignore country element TX power on 6 GHz
  mac80211: use bitfield helpers for BA session action frames
  mac80211: support Rx timestamp calculation for all preamble types
  mac80211: don't set set TDLS STA bandwidth wider than possible
  mac80211: support driver-based disconnect with reconnect hint
  cfg80211: support immediate reconnect request hint
  mac80211: use struct assignment for he_obss_pd
  cfg80211: remove struct ieee80211_he_bss_color
  nl80211: validate key indexes for cfg80211_registered_device
  cfg80211: include block-tx flag in channel switch started event
  mac80211: disallow band-switch during CSA
  ieee80211: update reduced neighbor report TBTT info length
  cfg80211: Save the regulatory domain when setting custom regulatory
  ...
====================

Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().

strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.

Conflicts:
	net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ath.git patches for v5.11. Major changes:

ath11k

* suspend support for QCA6390 PCI devices

* support TXOP duration based RTS threshold

* mesh: add support for 256 bitmap in blockack frames in 11ax

Now that all the needed pieces are in place implement suspend support QCA6390
PCI devices. All other devices will return -EOPNOTSUPP during suspend. The
suspend is implemented by switching the firmware to WoW mode during suspend, so
the firmware will be running on low power mode while host is in suspend.

At the moment we are not able to shutdown and fully power off the device due to
bugs in MHI subsystem, so WoW mode is a workaround for the time being.

During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to
suspend state.  During resume, driver resumes MHI firstly, then enables CE irq
and dp IRQ, and sends WoW wakeup command to firmware.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org

Add ce irq enable and disable hif layer functions, so core module can enable
enable them without cleaning pipe and refilling pipe. Needed for suspend.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org

Implement wow enable ane wow wakeup commands which are needed for suspend.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org

Firmware will check all the pipes before entering WoW mode during suspend. If
ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to
return credit even though it's actually not required. If any pipe needs to
return credit, the suspend_complete message doesn't send to host but is
dropped.  So host gets time out and WoW suspend failed.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org

Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep
it empty. During resume restart the reap timer.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org

When ath11k sends suspend command to firmware, firmware will
return suspend_complete events and add handlers for those.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org

No need for it so remove. Compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org

Just when resume from WoW, the write to select_window doesn't take
effect immediately, so read the register again to ensure the write
operation is finished.

Another change is to reset select_window to ZERO because this
register isn't restored after WoW, so the content of this register
becomes ZERO too.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org

For suspend support add suspend and resume to HIF layer. These ops are optional
and, for example, AHB bus driver does not need to implement these.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org

MHI suspend and resume isn't hooked in ath11k yet, so hook these
functions needed for suspend support.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org

Currently 6G specific tlvs have duplicate entries which is causing
scan failures. Fix this by removing the duplicate entries of the same
tlv. This also fixes out-of-bound memory writes caused due to
adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1

Fixes: 74601ecf ("ath11k: Add support for 6g scan hint")
Reported-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org

It's recommended to disable VDD4BLOW during initialisation.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-6-git-send-email-kvalo@codeaurora.org

For QCA6390, one PCI related clock drifts sometimes, and
it makes PCI link difficult to quit L1ss. Fix it by writing
some registers which are known to fix the problem.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-5-git-send-email-kvalo@codeaurora.org

For QCA6390, host needs to reset some registers before MHI power up to fix PCI
link unstable issue if hot reset happened. Also clear all pending interrupts
during power up.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-4-git-send-email-kvalo@codeaurora.org

It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware
to dbs mode instead of wmi_init command. This fixes a few strange stability
issues.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-3-git-send-email-kvalo@codeaurora.org

There was no way to detect if the firmware crashed so add a warning. At the
moment the firmware is not restarted or anything like that, so when this
happens ath11k modules need to be reloaded.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607609124-17250-2-git-send-email-kvalo@codeaurora.org

Use MHI provided APIs to allocate and free MHI controller to
improve MHI host driver handling. This also fixes a memory leak
as the MHI controller was allocated but never freed.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605634436-36506-1-git-send-email-bbhatt@codeaurora.org

When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very easy to break the 1st restart work and lead
recovery fail.

Add a flag to allow only one restart work running untill
device successfully recovered.

It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this
flag again, because it is clear in ath10k_core_start. The function
ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do
many things and drv_start(call to ath10k_core_start) is 1st thing,
when drv_start complete, it does not mean restart complete. So it
add new flag and clear it in ath10k_reconfig_complete, because it
is the last thing called from drv_reconfig_complete of function
ieee80211_reconfig, after it, the restart process finished.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com

In some devices difference in chip-id should be enough to pick
the right BDF. Add another support for chip-id based BDF selection.
With this new option, ath10k supports 2 fallback options.

The board name with chip-id as option looks as follows
board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320'

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1
Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid

Pull mtd fixes from Miquel Raynal:
 "Second series of fixes for raw NAND drivers initiated because of a
  rework of the ECC engine subsystem.

  The location of the DT parsing logic got moved, breaking several
  drivers which in fact were not doing the ECC engine initialization at
  the right place.

  These drivers have been fixed by enforcing a particular ECC engine
  type and algorithm, software Hamming, while the algorithm may be
  overwritten by a DT property. This merge request fixes this in the
  xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
  ams-delta controller drivers"

* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: xway: Do not force a particular software ECC engine
  mtd: rawnand: socrates: Do not force a particular software ECC engine
  mtd: rawnand: plat_nand: Do not force a particular software ECC engine
  mtd: rawnand: pasemi: Do not force a particular software ECC engine
  mtd: rawnand: orion: Do not force a particular software ECC engine
  mtd: rawnand: mpc5121: Do not force a particular software ECC engine
  mtd: rawnand: gpio: Do not force a particular software ECC engine
  mtd: rawnand: au1550: Do not force a particular software ECC engine
  mtd: rawnand: ams-delta: Do not force a particular software ECC engine

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC fixes:

  MMC core:
   - Fixup condition for CMD13 polling for RPMB requests

  MMC host:
   - mtk-sd: Fix system suspend/resume support for CQHCI
   - mtd-sd: Extend SDIO IRQ fix to more variants
   - sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
   - tmio: Bring HW to a sane state after a power off"

* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mediatek: mark PM functions as __maybe_unused
  mmc: block: Fixup condition for CMD13 polling for RPMB requests
  mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
  mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
  mmc: mediatek: Extend recheck_sdio_irq fix to more variants
  mmc: mediatek: Fix system suspend/resume support for CQHCI

Pull zonefs fix from Damien Le Moal:
 "A single patch in this pull request to fix a BIO and page reference
  leak when writing sequential zone files"

* tag 'zonefs-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix page reference and BIO leak

Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.

Fixes: eaa6bcb7 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: proc, selftests, kbuild, and
  mm (pagecache, kasan, hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/hugetlb: clear compound_nr before freeing gigantic pages
  kasan: fix object remaining in offline per-cpu quarantine
  elfcore: fix building with clang
  initramfs: fix clang build failure
  kbuild: avoid static_assert for genksyms
  selftest/fpu: avoid clang warning
  proc: use untagged_addr() for pagemap_read addresses
  revert "mm/filemap: add static for function __add_to_page_cache_locked"

Commit 1378a5ee ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping.  The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:

  BUG: Bad page state in process bash  pfn:380001
  page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
  aops:0x0
  flags: 0x3ffff00000000000()
  raw: 3ffff00000000000 0000000000000100 0000000000000122 0000000100000000
  raw: 0000000000000000 0000000000000000 ffffffff00000000 0000000000000000
  page dumped because: non-NULL mapping
  Modules linked in:
  CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
  Hardware name: IBM 3906 M03 703 (LPAR)
  Call Trace:
    show_stack+0x6e/0xe8
    dump_stack+0x90/0xc8
    bad_page+0xd6/0x130
    free_pcppages_bulk+0x26a/0x800
    free_unref_page+0x6e/0x90
    free_contig_range+0x94/0xe8
    update_and_free_page+0x1c4/0x2c8
    free_pool_huge_page+0x11e/0x138
    set_max_huge_pages+0x228/0x300
    nr_hugepages_store_common+0xb8/0x130
    kernfs_fop_write+0xd2/0x218
    vfs_write+0xb0/0x2b8
    ksys_write+0xac/0xe0
    system_call+0xe6/0x288
  Disabling lock debugging due to kernel taint

This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).

Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).

Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com
Fixes: 1378a5ee ("mm: store compound_nr as well as compound_order")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org>	[5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>