- 27 Jul, 2012 15 commits
-
-
Sachin Kamat authored
devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com>
-
Sachin Kamat authored
devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by:
-
Sachin Kamat authored
Fixes the following sparse warning: drivers/gpu/drm/exynos/exynos_drm_connector.c:199:20: warning: symbol 'exynos_drm_best_encoder' was not declared. Should it be static? Signed-off-by:
-
Joonyoung Shim authored
This patch adds exynos specific property for crtc mode. The crtc mode property has tow modes - normal and blank. The normal mode is default mode and can use crtc normally. The blank mode turns off the private plane of crtc, so we don't see crtc screen but can see other plane screens. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
The crtc disable is used to turn off private plane for crtc. Signed-off-by:
-
Joonyoung Shim authored
The plane enable/disable can control only a power of plane, so they will be helpful to handle planes with dpms. Signed-off-by:
-
Joonyoung Shim authored
The connector dpms should be controlled only by DPMS property and mode set. Signed-off-by:
-
Joonyoung Shim authored
When we do mode set, the dpms mode should be ON. Don't control dpms in crtc commit function. Signed-off-by:
-
Joonyoung Shim authored
The exynos drm driver used a specific ioctl - DRM_EXYNOS_PLANE_SET_ZPOS to set zpos of plane. It can be substitute to property of plane. This patch adds a property for plane zpos and removes DRM_EXYNOS_PLANE_SET_ZPOS ioctl. Signed-off-by:
-
Joonyoung Shim authored
There is no any reason to update overlay at crtc directly because the crtc uses plane. Move its code to plane and call proper functions of plane from crtc. Signed-off-by:
-
Joonyoung Shim authored
The crtc can use private plane instead it has overlay struct. It will be helpful use plane feature from crtc later. Signed-off-by:
-
Joonyoung Shim authored
Add macro to get struct exynos_plane from struct drm_plane pointer. Signed-off-by:
-
Joonyoung Shim authored
It is enough to set pipe of crtc to manager only when do mode_set of crtc. Signed-off-by:
-
Joonyoung Shim authored
Call overlay->mode_set from crtc->mode_set instead of encoder->mode_set, it makes codes clearly. Signed-off-by:
-
Inki Dae authored
-
- 26 Jul, 2012 11 commits
-
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel writes: (this pull is the one with the bad patch dropped) First pile of fixes for 3.6 already, and I'm afraid it's a bit larger than what I'd wish for. But I've moved all the feature-y stuff to -next, so this really is all -fixes. Most of it is handling fallout from the hw context stuff, discovered now that mesa git has started using them for real. Otherwise all just small fixes: - unbreak modeset=0 on gen6+ (regressed in next) - const mismatch fix for ->mode_fixup - simplify overly clever lvds modeset code (current code can totally confuse backlights, resulting in broken panels until a full power draw restores them). - fix some fallout from the flushing_list disabling (regression only introduced in -next) - DP link train improvements (this also kills the last 3.2 dp regression afaik) - bugfix for the new ddc VGA detection on newer platforms - minor backlight fixes (one of them a -next regression) - only enable the required PM interrupts (to avoid waking up the cpu unnecessarily) - some really minor bits (workaround clarification, make coverty happy, hsw init fix) * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (23 commits) drm/i915: unbreak lastclose for failed driver init drm/i915: Set the context before setting up regs for the context. drm/i915: constify mode in crtc_mode_fixup drm/i915/lvds: ditch ->prepare special case drm/i915: dereferencing an error pointer drm/i915: fix invalid reference handling of the default ctx obj drm/i915: Add -EIO to the list of known errors for __wait_seqno drm/i915: Flush the context object from the CPU caches upon switching drm/i915: Make the lock for pageflips interruptible drm/i915: don't forget the PCH backlight registers drm/i915: Insert a flush between batches if the breadcrumb was dropped drm/i915: missing error case in init status page drm/i915: mask tiled bit when updating ILK sprites drm/i915: try to train DP even harder drm/i915: kill intel_ddc_probe drm/i915: check whether we actually received an edid in detect_ddc drm/i915: fix up PCH backlight #define mixup drm/i915: Add comments to explain the BSD tail write workaround drm/i915: Disable the BLT on pre-production SNB hardware drm/i915: initialize power wells in modeset_init_hw ...
-
Dave Airlie authored
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: init vblank requests list drm/nv50: extend vblank semaphore to generic dmaobj + offset pair drm/nouveau: mark most of our ioctls as deprecated, move to compat layer drm/nouveau: move current gpuobj code out of nouveau_object.c drm/nouveau/gem: fix object reference leak in a failure path drm/nv50: rename INVALID_QUERY_OR_TEXTURE error to INVALID_OPERATION drm/nv84: decode PCRYPT errors drm/nouveau: dcb table quirk for fdo#50830 nouveau: Fix alignment requirements on src and dst addresses
-
Marcin Slusarz authored
Fixes kernel panic when vblank interrupt triggers before first sync to vblank request. (Besides init, remove some relevant leftovers from vblank rework) Reported-by:
Ortwin Glück <odi@odi.ch> Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@vger.kernel.org [3.5] Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
These will be replaced in the near future, the code isn't yet stable enough for this merge window however. Signed-off-by: -
Ben Skeggs authored
I want this file for the new interfaces... Signed-off-by: -
Ben Skeggs authored
Reported-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
Marcin Slusarz authored
Current name is misleading, because this error can be triggered by other conditions, like changing STRMOUT parameter without disabling STRMOUT first. Signed-off-by:
-
Marcin Slusarz authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Maarten Lankhorst authored
Linear copy works by adding the offset to the buffer address, which may end up not being 16-byte aligned. Some tests I've written for prime_pcopy show that the engine allows this correctly, so the restriction on lowest 4 bits of address can be lifted safely. The comments added were by envyas, I think because I used a newer version. Signed-off-by:
-
- 25 Jul, 2012 14 commits
-
-
Daniel Vetter authored
We now refuse to load on gen6+ if kms is not enabled: commit 26394d92 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Mar 26 21:33:18 2012 +0200 drm/i915: refuse to load on gen6+ without kms Which results in the drm core calling our lastclose function to clean up the mess, but that one is neatly broken for such failure cases since kms has been introduced in commit 79e53945 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Nov 7 14:24:08 2008 -0800 DRM: i915: add mode setting support Reported-and-tested-by:
Paulo Zanoni <przanoni@gmail.com> Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eric Anholt authored
Fixes failures in transform feedback on gen7 because our SOL_RESET flag was setting the transform feedback offsets in the old context (occasionally happened to be ours) instead of the new context. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Daniel Vetter authored
Laurent Pinchart missed this when sending in is giant constify patch: commit e811f5ae Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Date: Tue Jul 17 17:56:50 2012 +0200 drm: Make the .mode_fixup() operations mode argument a const pointer Acked-by; Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-Off-by:
-
Daniel Vetter authored
LVDS is the first output where dpms on/off and prepare/commit don't perfectly match. Now the idea behind this special case seems to be that for simple resolution changes on the LVDS we don't need to stop the pipe, because (at least on newer chips) we can adjust the panel fitter on the fly. There are a few problems with the current code though: - We still stop and restart the pipe unconditionally, because the crtc helper code isn't flexible enough. - We show some ugly flickering, especially when changing crtcs (this the crtc helper would actually take into account, but we don't implement the encoder->get_crtc callback required to make this work properly). So it doesn't even work as advertised. I agree that it would be nice to do resolution changes on LVDS (and also eDP) whithout blacking the screen where the panel fitter allows to do that. But imo we should implement this as a special case a few layers up in the mode set code, akin to how we already detect simple framebuffer changes (and only update the required registers with ->mode_set_base). Until this is all in place, make our lives easier and just rip it out. Also note that this seems to fix actual bugs with enabling the lvds output, see: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018614.html Cc: Takashi Iwai <tiwai@suse.de> Cc: Giacomo Comes <comes@naic.edu> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-Off-by:
-
Dan Carpenter authored
We need to check that "ctx" is a valid pointer before dereferencing it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chris Wilson authored
Otherwise we end up trying to unpin a freed object and BUG. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Chris Wilson authored
This prevents a WARN introduced with commit de2b9985 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jul 4 22:52:50 2012 +0200 drm/i915: don't return a spurious -EIO from intel_ring_begin Signed-off-by:
-
Chris Wilson authored
The issue is that we stale data in the CPU caches, when we come to swap-out the object, the CPU may short-circuit the reads from those cacheline and so corrupt the context object. Secondary, leaving the context object as being marked in the CPU write domain whilst on the GPU active list is a bad idea and will throw warnings later. Note: Thanks to calling set_to_gtt_domain with write = false and not setting any gpu write domain when putting a context object onto the active list (when we switch away from it) the set_to_gtt_domain call won't block. Signed-off-by:
-
Jerome Glisse authored
The external encoder need to be setup again before enabling the transmiter. This seems to be only needed on some trinity/aruba to fix dpms on. v2: Add comment, only setup again on dce6 ie aruba or newer. Cc: <stable@kernel.org> Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
To have DP behave like VGA/DVI we need to retrain the link on hotplug. For this to happen we need to force link training to happen by setting connector dpms to off before asking it turning it on again. v2: agd5f - drop the dp_get_link_status() change in atombios_dp.c for now. We still need the dpms OFF change. Signed-off-by:
-
Jerome Glisse authored
No need to retrain the link for passive adapters. v2: agd5f - no passive DP to VGA adapters, update comments - assign radeon_connector_atom_dig after we are sure we have a digital connector as analog connectors have different private data. - get new sink type before checking for retrain. No need to check if it's no longer a DP connection. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jerome Glisse authored
We want to print link status query failed only if it's an unexepected fail. If we query to see if we need link training it might be because there is nothing connected and thus link status query have the right to fail in that case. To avoid printing failure when it's expected, move the failure message to proper place. Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Carpenter authored
Static checkers complain if this we don't check for allocation failure. Also we can use the new kmalloc_array() function here as a cleanup. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jerome Glisse authored
Retry label was at wrong place in function leading to memory leak. Cc: <stable@vger.kernel.org> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
