- 10 Oct, 2023 8 commits
-
-
Gerd Bayer authored
When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba ("net/ism: Add new API for client registration") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/Co-developed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by:
Paolo Abeni <pabeni@redhat.com>
-
Dan Carpenter authored
The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c ("ixgbe: Add macvlan support for VF") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadamSigned-off-by:
-
Paolo Abeni authored
Radu Pirea says: ==================== Add update_pn flag Patches extracted from https://lore.kernel.org/all/20230928084430.1882670-1-radu-nicolae.pirea@oss.nxp.com/ Update_pn flag will let the offloaded MACsec implementations to know when the PN is updated. ==================== Link: https://lore.kernel.org/r/20231005180636.672791-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by:
-
Radu Pirea (NXP OSS) authored
When updating the SA, use the new update_pn flags instead of comparing the new PN with the initial one. Comparing the initial PN value with the new value will allow the user to update the SA using the initial PN value as a parameter like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 off Fixes: 8ff0ac5b ("net/mlx5: Add MACsec offload Tx command support") Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by:
Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Updating the PN is not supported. Return -EINVAL if update_pn is true. The following command succeeded, but it should fail because the driver does not update the PN: ip macsec set macsec0 tx sa 0 pn 232 on Fixes: 28c5107a ("net: phy: mscc: macsec support") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
When updating SA, update the PN only when the update_pn flag is true. Otherwise, the PN will be reset to its previous value using the following command and this should not happen: $ ip macsec set macsec0 tx sa 0 on Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by:
-
Eric Dumazet authored
syzbot uses panic_on_warn. This means that the skb_dump() I added in the blamed commit are not even called. Rewrite this so that we get the needed skb dump before syzbot crashes. Fixes: eeee4b77 ("net: add more debug info in skb_checksum_help()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
- 08 Oct, 2023 3 commits
-
-
Michal Swiatkowski authored
When one of the LAG interfaces is in switchdev mode, setting default rule can't be done. The interface on which switchdev is running has ice_set_rx_mode() blocked to avoid default rule adding (and other rules). The other interfaces (without switchdev running but connected via bond with interface that runs switchdev) can't follow the same scheme, because rx filtering needs to be disabled when failover happens. Notification for bridge to set promisc mode seems like good place to do that. Fixes: bb52f42a ("ice: Add driver support for firmware changes for LAG") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roger Pau Monne authored
Do not set netback interfaces (vifs) default TX queue size to the ring size. The TX queue size is not related to the ring size, and using the ring size (32) as the queue size can lead to packet drops. Note the TX side of the vif interface in the netback domain is the one receiving packets to be injected to the guest. Do not explicitly set the TX queue length to any value when creating the interface, and instead use the system default. Note that the queue length can also be adjusted at runtime. Fixes: f942dc25 ('xen network backend driver') Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return zero on success or negative error codes. So it needs to be type int instead of bool. Fixes: 4ee70efa ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2") Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
- 06 Oct, 2023 12 commits
-
-
Jakub Kicinski authored
Yoshihiro Shimoda says: ==================== ravb: Fix use-after-free issues This patch series fixes use-after-free issues in ravb_remove(). The original patch is made by Zheng Wang [1]. And, I made the patch 1/2 which I found other issue in the ravb_remove(). [1] https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/ v1: https://lore.kernel.org/all/20231004091253.4194205-1-yoshihiro.shimoda.uh@renesas.com/ ==================== Link: https://lore.kernel.org/r/20231005011201.14368-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reported-by:
Zheng Wang <zyytlz.wz@163.com> Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
In ravb_remove(), dma_free_coherent() should be call after unregister_netdev(). Otherwise, this controller is possible to use the freed buffer. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
-
Moshe Shemesh authored
Devlink health dump get callback should take devlink lock as any other devlink callback. Otherwise, since devlink_mutex was removed, this callback is not protected from a race of the reporter being destroyed while handling the callback. Add devlink lock to the callback and to any call for devlink_health_do_dump(). This should be safe as non of the drivers dump callback implementation takes devlink lock. As devlink lock is added to any callback of dump, the reporter dump_lock is now redundant and can be removed. Fixes: d3efc2a6 ("net: devlink: remove devlink_mutex") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Gustavo A. R. Silva authored
commit d61491a5 ("net/sched: cls_u32: Replace one-element array with flexible-array member") incorrecly replaced an instance of `sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results in a an over-allocation of 8 bytes. This change is wrong because `hlist` in `struct tc_u_common` is a pointer: net/sched/cls_u32.c: struct tc_u_common { struct tc_u_hnode __rcu *hlist; void *ptr; int refcnt; struct idr handle_idr; struct hlist_node hnode; long knodes; }; So, the use of `struct_size()` makes no sense: we don't need to allocate any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine. So, `struct_size(tp_c, hlist->ht, 1)` translates to: sizeof(*tp_c) + sizeof(tp_c->hlist->ht) == sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) == 144 + 8 == 0x98 (byes) ^^^ | unnecessary extra allocation size $ pahole -C tc_u_common net/sched/cls_u32.o struct tc_u_common { struct tc_u_hnode * hlist; /* 0 8 */ void * ptr; /* 8 8 */ int refcnt; /* 16 4 */ /* XXX 4 bytes hole, try to pack */ struct idr handle_idr; /* 24 96 */ /* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */ struct hlist_node hnode; /* 120 16 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ long int knodes; /* 136 8 */ /* size: 144, cachelines: 3, members: 6 */ /* sum members: 140, holes: 1, sum holes: 4 */ /* last cacheline: 16 bytes */ }; And with `sizeof(*tp_c)`, we have: sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes) which is the correct and original allocation size. Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with `sizeof(*tp_c)`, and avoid allocating 8 too many bytes. The following difference in binary output is expected and reflects the desired change: | net/sched/cls_u32.o | @@ -6148,7 +6148,7 @@ | include/linux/slab.h:599 | 2cf5: mov 0x0(%rip),%rdi # 2cfc <u32_init+0xfc> | 2cf8: R_X86_64_PC32 kmalloc_caches+0xc |- 2cfc: mov $0x98,%edx |+ 2cfc: mov $0x90,%edx Reported-by:
Alejandro Colomar <alx@kernel.org> Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Marek Behún says: ==================== net: dsa: qca8k: fix qca8k driver for Turris 1.x this is v2 of https://lore.kernel.org/netdev/20231002104612.21898-1-kabel@kernel.org/ Changes since v1: - fixed a typo in commit message noticed by Simon Horman ==================== Signed-off-by:
-
Marek Behún authored
Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus also Micron ethernet PHY (dedicated to the WAN port). We've been experiencing a strange behavior of the WAN ethernet interface, wherein the WAN PHY started timing out the MDIO accesses, for example when the interface was brought down and then back up. Bisecting led to commit 2cd54856 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet"), which added support to access the QCA8337 switch's internal PHYs via management ethernet frames. Connecting the MDIO bus pins onto an oscilloscope, I was able to see that the MDIO bus was active whenever a request to read/write an internal PHY register was done via an management ethernet frame. My theory is that when the switch core always communicates with the internal PHYs via the MDIO bus, even when externally we request the access via ethernet. This MDIO bus is the same one via which the switch and internal PHYs are accessible to the board, and the board may have other devices connected on this bus. An ASCII illustration may give more insight: +---------+ +----| | | | WAN PHY | | +--| | | | +---------+ | | | | +----------------------------------+ | | | QCA8337 | MDC | | | +-------+ | ------o-+--|--------o------------o--| | | MDIO | | | | | PHY 1 |-|--to RJ45 --------o--|---o----+---------o--+--| | | | | | | | +-------+ | | +-------------+ | o--| | | | | MDIO MDC | | | | PHY 2 |-|--to RJ45 eth1 | | | o--+--| | | -----------|-|port0 | | | +-------+ | | | | | o--| | | | | switch core | | | | PHY 3 |-|--to RJ45 | +-------------+ o--+--| | | | | | +-------+ | | | o--| ... | | +----------------------------------+ When we send a request to read an internal PHY register via an ethernet management frame via eth1, the switch core receives the ethernet frame on port 0 and then communicates with the internal PHY via MDIO. At this time, other potential devices, such as the WAN PHY on Turris 1.x, cannot use the MDIO bus, since it may cause a bus conflict. Fix this issue by locking the MDIO bus even when we are accessing the PHY registers via ethernet management frames. Fixes: 2cd54856 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Marek Behún authored
Commit c766e077 ("net: dsa: qca8k: convert to regmap read/write API") introduced bulk read/write methods to qca8k's regmap. The regmap bulk read/write methods get the register address in a buffer passed as a void pointer parameter (the same buffer contains also the read/written values). The register address occupies only as many bytes as it requires at the beginning of this buffer. For example if the .reg_bits member in regmap_config is 16 (as is the case for this driver), the register address occupies only the first 2 bytes in this buffer, so it can be cast to u16. But the original commit implementing these bulk read/write methods cast the buffer to u32: u32 reg = *(u32 *)reg_buf & U16_MAX; taking the first 4 bytes. This works on little endian systems where the first 2 bytes of the buffer correspond to the low 16-bits, but it obviously cannot work on big endian systems. Fix this by casting the beginning of the buffer to u16 as u32 reg = *(u16 *)reg_buf; Fixes: c766e077 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for lynx-28g PHY driver This series fixes some issues in the Lynx 28G SerDes driver, namely an oops when unloading the module, a race between the periodic workqueue and the PHY API, and a race between phy_set_mode_ext() calls on multiple lanes on the same SerDes. ==================== Signed-off-by: -
Vladimir Oltean authored
The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset the lane receiver if the CDR has not locked onto bit transitions in the RX stream. But the PHY consumer may do stuff with the PHY simultaneously, and that isn't okay. Block concurrent generic PHY calls by holding the PHY mutex from this workqueue. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
-
Ioana Ciornei authored
The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
- 05 Oct, 2023 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ... -
Linus Torvalds authored
Merge tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Two additional patches to fix the removal of the deprecated IMA_TRUSTED_KEYRING Kconfig" * tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: rework CONFIG_IMA dependency block ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED fix from Lee Jones: "Just the one bug-fix: - Fix regression affecting LED_COLOR_ID_MULTI users" * tag 'leds-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fixes from Lee Jones: "A couple of small fixes: - Potential build failure in CS42L43 - Device Tree bindings clean-up for a superseded patch" * tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector" mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
-
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfsLinus Torvalds authored
Pull overlayfs fixes from Amir Goldstein: - Fix for file reference leak regression - Fix for NULL pointer deref regression - Fixes for RCU-walk race regressions: Two of the fixes were taken from Al's RCU pathwalk race fixes series with his consent [1]. Note that unlike most of Al's series, these two patches are not about racing with ->kill_sb() and they are also very recent regressions from v6.5, so I think it's worth getting them into v6.5.y. There is also a fix for an RCU pathwalk race with ->kill_sb(), which may have been solved in vfs generic code as you suggested, but it also rids overlayfs from a nasty hack, so I think it's worth anyway. Link: https://lore.kernel.org/linux-fsdevel/20231003204749.GA800259@ZenIV/ [1] * tag 'ovl-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fix NULL pointer defer when encoding non-decodable lower fid ovl: make use of ->layers safe in rcu pathwalk ovl: fetch inode once in ovl_dentry_revalidate_common() ovl: move freeing ovl_entry past rcu delay ovl: fix file reference leak when submitting aio
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes and maintainer email update for v6.6 Patch 1 addresses a race condition in MPTCP "delegated actions" infrastructure. Affects v5.19 and later. Patch 2 removes an unnecessary restriction that did not allow additional outgoing subflows using the local address of the initial MPTCP subflow. v5.16 and later. Patch 3 updates Matthieu's email address. ==================== Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-0-28de4ac663ae@kernel.orgSigned-off-by:
-
Matthieu Baerts authored
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by:
Matthieu Baerts <matttbe@kernel.org> Signed-off-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.orgSigned-off-by:
-
Geliang Tang authored
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: stable@vger.kernel.org Suggested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Paolo Abeni authored
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734 ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: stable@vger.kernel.org Reviewed-by:
-
Remi Pommarel authored
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd0 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
-
Randy Dunlap authored
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b3 ("net: lan743x: select FIXED_PHY") Signed-off-by:
kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by:
-
Christian Marangi authored
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Haiyang Zhang authored
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1 ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by:
-
Haiyang Zhang authored
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linuxLinus Torvalds authored
Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis
-
