- 03 Mar, 2018 40 commits
-
-
Sunil Challa authored
[ Upstream commit 7deea450 ] flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to incorrect passing of pointer and size of l3_mask argument of is_wildcard(). Fixed this. Fixes: db1d36a2 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by:
Sunil Challa <sunilkumar.challa@broadcom.com> Reviewed-by:
Sathya Perla <sathya.perla@broadcom.com> Reviewed-by:
Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
[ Upstream commit 9d0513d8 ] So one of the constification patches unearthed a type casting fragility of the underlying code: 276c8705 ("x86/platform/intel-mid: Make 'bt_sfi_data' const") converted the struct to be const while it is also used as a temporary container for important data that is used to fill 'parent' and 'name' fields in struct platform_device_info. The compiler doesn't notice this due to an explicit type cast that loses the const - which fragility will be fixed separately. This type cast turned a seemingly trivial const propagation patch into a hard to debug data corruptor and crasher bug. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: julia.lawall@lip6.fr Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20171228122523.21802-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit 6b018235 ] The field was uninitialized before use. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit e2d59152 ] The hotplug code uses its own workqueue to handle IRQ requests (pseries_hp_wq), however that workqueue is initialized after init_ras_IRQ(). That can lead to a kernel panic if any hotplug interrupts fire after init_ras_IRQ() but before pseries_hp_wq is initialised. eg: UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) NET: Registered protocol family 1 Unpacking initramfs... (qemu) object_add memory-backend-ram,id=mem1,size=10G (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 Unable to handle kernel paging request for data at address 0xf94d03007c421378 Faulting instruction address: 0xc00000000012d744 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-ziviani+ #26 task: (ptrval) task.stack: (ptrval) NIP: c00000000012d744 LR: c00000000012d744 CTR: 0000000000000000 REGS: (ptrval) TRAP: 0380 Not tainted (4.15.0-rc2-ziviani+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088042 XER: 20040000 CFAR: c00000000012d3c4 SOFTE: 0 ... NIP [c00000000012d744] __queue_work+0xd4/0x5c0 LR [c00000000012d744] __queue_work+0xd4/0x5c0 Call Trace: [c0000000fffefb90] [c00000000012d744] __queue_work+0xd4/0x5c0 (unreliable) [c0000000fffefc70] [c00000000012dce4] queue_work_on+0xb4/0xf0 This commit makes the RAS IRQ registration explicitly dependent on the creation of the pseries_hp_wq. Reported-by:
Min Deng <mdeng@redhat.com> Reported-by:
Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Tested-by:
Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Jacek Anaszewski authored
[ Upstream commit 7b6af2c5 ] Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 5731a879 ] Add psock NULL check to handle a racing sock event that can get the sk_callback_lock before this case but after xchg happens causing the refcnt to hit zero and sock user data (psock) to be null and queued for garbage collection. Also add a comment in the code because this is a bit subtle and not obvious in my opinion. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Valentin Ilie authored
[ Upstream commit 7729bebc ] Remove the extra parenthesis. This bug was introduced by: e2339a4c: ("ia64: Convert vtime to use nsec units directly") Signed-off-by:
Valentin Ilie <valentin.ilie@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Cc: linux-ia64@vger.kernel.org Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1515193979-24873-1-git-send-email-valentin.ilie@gmail.comSigned-off-by:
-
Ming Lei authored
[ Upstream commit 454be724 ] Now we track legacy requests with .q_usage_counter in commit 055f6e18 ("block: Make q_usage_counter also track legacy requests"), but that commit never runs and drains legacy queue before waiting for this counter becoming zero, then IO hang is caused in the test of pulling disk during IO. This patch fixes the issue by draining requests before waiting for q_usage_counter becoming zero, both Mauricio and chenxiang reported this issue, and observed that it can be fixed by this patch. Link: https://marc.info/?l=linux-block&m=151192424731797&w=2 Fixes: 055f6e18("block: Make q_usage_counter also track legacy requests") Cc: Wen Xiong <wenxiong@us.ibm.com> Tested-by:
"chenxiang (M)" <chenxiang66@hisilicon.com> Tested-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Loic Poulain authored
[ Upstream commit 0856655a ] Since driver does not report hardware dynamic power saving cap, this is up to the mac80211 to manage power saving timeout and state machine, using the ieee80211 config callback to report PS changes. This patch enables/disables PS mode according to the new configuration. Remove old behaviour enabling PS mode in a static way, this make the device unusable when power save is enabled since device is forced to PS regardless RX/TX traffic. Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Luu An Phu authored
[ Upstream commit 13454c14 ] The flexcan_start_xmit() function compares the frame length with data register length to write frame content into data[0] and data[1] register. Data register length is 4 bytes and frame maximum length is 8 bytes. Fix the check that compares frame length with 3. Because the register length is 4. Signed-off-by:
Luu An Phu <phu.luuan@nxp.com> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 736a80bb ] If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by:
Gui Iribarren <gui@altermundi.net> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Hao Chen authored
[ Upstream commit 3ea15452 ] nl80211_nan_add_func() does not check if the required attribute NL80211_NAN_FUNC_FOLLOW_UP_DEST is present when processing NL80211_CMD_ADD_NAN_FUNCTION request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attribute presence. Signed-off-by:
Hao Chen <flank3rsky@gmail.com> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 7853b49c ] Under certain conditions MSI-X interrupt might arrive right after it was unmasked in ena_up(). There is a chance it would be processed by the driver before device ENA_FLAG_DEV_UP flag is set. In such a case the interrupt is ignored. ENA device operates in auto-masked mode, therefore ignoring interrupt leaves it masked for good. Moving unmask of interrupt to be the last step in ena_up(). Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 458867b2 ] In some circumstances, such as with bridging, it is possible that the stack will add a devices own MAC address to its unicast address list. If, later, the stack deletes this address, then the i40e driver will receive a request to remove this address. The driver stores its current MAC address as part of the MAC/VLAN hash array, since it is convenient and matches exactly how the hardware expects to be told which traffic to receive. This causes a problem, since for more devices, the MAC address is stored separately, and requests to delete a unicast address should not have the ability to remove the filter for the MAC address. Fix this by forcing a check on every address sync to ensure we do not remove the device address. There is a very narrow possibility of a race between .set_mac and .set_rx_mode, if we don't change netdev->dev_addr before updating our internal MAC list in .set_mac. This might be possible if .set_rx_mode is going to remove MAC "XYZ" from the list, at the same time as .set_mac changes our dev_addr to MAC "XYZ", we might possibly queue a delete, then an add in .set_mac, then queue a delete in .set_rx_mode's dev_uc_sync and then update netdev->dev_addr. We can avoid this by moving the copy into dev_addr prior to the changes to the MAC filter list. A similar race on the other side does not cause problems, as if we're changing our MAC form A to B, and we race with .set_rx_mode, it could queue a delete from A, we'd update our address, and allow the delete. This seems like a race, but in reality we're about to queue a delete of A anyways, so it would not cause any issues. A race in the initialization code is unlikely because the netdevice has not yet been fully initialized and the stack should not be adding or removing addresses yet. Note that we don't (yet) need similar code for the VF driver because it does not make use of __dev_uc_sync and __dev_mc_sync, but instead roles its own method for handling updates to the MAC/VLAN list, which already has code to protect against removal of the hardware address. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 248de22e ] The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Felix Janda authored
[ Upstream commit c0bace79 ] libc-compat.h aims to prevent symbol collisions between uapi and libc headers for each supported libc. This requires continuous coordination between them. The goal of this commit is to improve the situation for libcs (such as musl) which are not yet supported and/or do not wish to be explicitly supported, while not affecting supported libcs. More precisely, with this commit, unsupported libcs can request the suppression of any specific uapi definition by defining the correspondings _UAPI_DEF_* macro as 0. This can fix symbol collisions for them, as long as the libc headers are included before the uapi headers. Inclusion in the other order is outside the scope of this commit. All infrastructure in order to enable this fallback for unsupported libcs is already in place, except that libc-compat.h unconditionally defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that any previous definitions are ignored. In order to fix this, this commit merely makes these definitions conditional. This commit together with the musl libc commit http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258 fixes for example the following compiler errors when <linux/in6.h> is included after musl's <netinet/in.h>: ./linux/in6.h:32:8: error: redefinition of 'struct in6_addr' ./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6' ./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq' The comments referencing glibc are still correct, but this file is not only used for glibc any more. Signed-off-by:
Felix Janda <felix.janda@posteo.de> Reviewed-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Dave Young authored
[ Upstream commit 835bcec5 ] 'add_efi_memmap' is an early param, but do_add_efi_memmap() has no chance to run because the code path is before parse_early_param(). I believe it worked when the param was introduced but probably later some other changes caused the wrong order and nobody noticed it. Move efi_memblock_x86_reserve_range() after parse_early_param() to fix it. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Ge Song <ge.song@hxt-semitech.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180102172110.17018-2-ard.biesheuvel@linaro.orgSigned-off-by:
-
Leon Romanovsky authored
[ Upstream commit f8978bd9 ] Holding locks is mandatory when calling __ib_device_get_by_index, otherwise there are races during the list iteration with device removal. Since the locks are static to device.c, __ib_device_get_by_index can never be called correctly by any user out side the file. Make the function static and provide a safe function that gets the correct locks and returns a kref'd pointer. Fix all callers. Fixes: e5c9469e ("RDMA/netlink: Add nldev device doit implementation") Fixes: c3f66f7b ("RDMA/netlink: Implement nldev port doit callback") Fixes: 7d02f605 ("RDMA/netlink: Add nldev port dumpit implementation") Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Xiongwei Song authored
[ Upstream commit 19d859a7 ] In the function ttm_page_alloc_init, kzalloc call is made for variable _manager, we need to check its return value, it may return NULL. Signed-off-by:
Xiongwei Song <sxwjean@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
SZ Lin (林上智) authored
[ Upstream commit bd30ffc4 ] This patch adds support for PID 0x9625 of YUGA CLM920-NC5. YUGA CLM920-NC5 needs to enable QMI_WWAN_QUIRK_DTR before QMI operation. qmicli -d /dev/cdc-wdm0 -p --dms-get-revision [/dev/cdc-wdm0] Device revision retrieved: Revision: 'CLM920_NC5-V1 1 [Oct 23 2016 19:00:00]' Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Tushar Dave authored
[ Upstream commit 0b76aae7 ] This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c073991 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Gao Feng authored
[ Upstream commit d02fd6e7 ] Because the macvlan_uninit would free the macvlan port, so there is one double free case in macvlan_common_newlink. When the macvlan port is just created, then register_netdevice or netdev_upper_dev_link failed and they would invoke macvlan_uninit. Then it would reach the macvlan_port_destroy which triggers the double free. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
Aliaksei Karaliou authored
[ Upstream commit 3a3882ff ] xfs_qm_init_quotainfo() does not check result of register_shrinker() which was tagged as __must_check recently, reported by sparse. Signed-off-by:
Aliaksei Karaliou <akaraliou.dev@gmail.com> [darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos] Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Aliaksei Karaliou authored
[ Upstream commit 21968815 ] xfs_qm_destroy_quotainfo() does not destroy quotainfo->qi_tree_lock while destroys quotainfo->qi_quotaofflock. Signed-off-by:
-
Erez Shitrit authored
[ Upstream commit 16ba3def ] When using enhanced mode for IPoIB, two threads may execute xmit in parallel to two different TX queues while the target is the same. In this case, both of them will add the same neighbor to the path's neigh link list and we might see the following message: list_add double add: new=ffff88024767a348, prev=ffff88024767a348... WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70 ipoib_start_xmit+0x477/0x680 [ib_ipoib] dev_hard_start_xmit+0xb9/0x3e0 sch_direct_xmit+0xf9/0x250 __qdisc_run+0x176/0x5d0 __dev_queue_xmit+0x1f5/0xb10 __dev_queue_xmit+0x55/0xb10 Analysis: Two SKB are scheduled to be transmitted from two cores. In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get. Two calls to neigh_add_path are made. One thread takes the spin-lock and calls ipoib_neigh_alloc which creates the neigh structure, then (after the __path_find) the neigh is added to the path's neigh link list. When the second thread enters the critical section it also calls ipoib_neigh_alloc but in this case it gets the already allocated ipoib_neigh structure, which is already linked to the path's neigh link list and adds it again to the list. Which beside of triggering the list, it creates a loop in the linked list. This loop leads to endless loop inside path_rec_completion. Solution: Check list_empty(&neigh->list) before adding to the list. Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send" Fixes: b63b70d8 ('IPoIB: Use a private hash table for path lookup in xmit path') Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit 5a371cf8 ] ibmr.device is being set only after ib_alloc_mr() is successfully complete. Therefore, in case imlx4_mr_enable() returns with error, the error flow unwinder calls to mlx4_free_priv_pages(), which uses ibmr.device. Such usage causes to NULL dereference oops and to fix it, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx4_free_priv_pages()). Fixes: 1b2cd0fc ("IB/mlx4: Support the new memory registration API") Signed-off-by:
Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by:
-
Oleksandr Andrushchenko authored
[ Upstream commit 02a0d921 ] Some user-space applications expect multi-touch pressure on contact to be reported if it is advertised in device properties. Otherwise, such applications may treat reports not as actual touches, but hovering. Currently this is only advertised, but not reported. Fix this by not advertising that ABS_MT_PRESSURE is supported. Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by:
Andrii Chepurnyi <andrii_chepurnyi@epam.com> Patchwork-Id: 10140017 Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2fa771be ] Commit 582442d6 ("ipv6: Allow the MTU of ipip6 tunnel to be set below 1280") fixed a mtu setting issue. It works for ipip6 tunnel. But ip6gre dev updates the mtu also with ip6_tnl_change_mtu. Since the inner packet over ip6gre can be ipv4 and it's mtu should also be allowed to set below 1280, the same issue also exists on ip6gre. This patch is to fix it by simply changing to check if parms.proto is IPPROTO_IPV6 in ip6_tnl_change_mtu instead, to make ip6gre to go to 'else' branch. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Nikolay Borisov authored
[ Upstream commit beed9263 ] Commit e0ae9994 ("btrfs: preallocate device flush bio") reworked the way the flush bio is allocated and used. Concretely it allocates the bio in __alloc_device and then re-uses it multiple times with a very simple endio routine that just calls complete() without consuming a reference. Allocated bios by default come with a ref count of 1, which is then consumed by the endio routine (or not, in which case they should be bio_put by the caller). The way the impleementation works now is that the flush bio has a refcount of 2 and we only ever bio_put it once, leaving it to hang indefinitely. Fix this by removing the extra bio_get in __alloc_device. Fixes: e0ae9994 ("btrfs: preallocate device flush bio") Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit 8a9bd4f8 ] We store per path and per device configuration data to identify the path or device correctly. The per path configuration data might get mixed up if the original request gets into error recovery and is started with a random path mask. This would lead to a wrong identification of a path in case of a CUIR event for example. Fix by copying the path mask from the original request to the error recovery request in case it is a path verification request. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
David Howells authored
[ Upstream commit afae457d ] afs_write_end() is missing page unlock and put if afs_fill_page() fails. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 11bca0a8 ] An interrupt storm on a bad interrupt will cause the kernel log to be clogged. [ 60.089234] ->handle_irq(): ffffffffbe2f803f, [ 60.090455] 0xffffffffbf2af380 [ 60.090510] handle_bad_irq+0x0/0x2e5 [ 60.090522] ->irq_data.chip(): ffffffffbf2af380, [ 60.090553] IRQ_NOPROBE set [ 60.090584] ->handle_irq(): ffffffffbe2f803f, [ 60.090590] handle_bad_irq+0x0/0x2e5 [ 60.090596] ->irq_data.chip(): ffffffffbf2af380, [ 60.090602] 0xffffffffbf2af380 [ 60.090608] ->action(): (null) [ 60.090779] handle_bad_irq+0x0/0x2e5 This was seen when running an upstream kernel on Acer Chromebook R11. The system was unstable as result. Guard the log message with __printk_ratelimit to reduce the impact. This won't prevent the interrupt storm from happening, but at least the system remains stable. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Link: https://lkml.kernel.org/r/1512234784-21038-1-git-send-email-linux@roeck-us.netSigned-off-by:
-
Nitzan Carmi authored
[ Upstream commit 45e6ae7e ] ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee5 ("IB/mlx5: Support the new memory registration API") Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Matthieu CASTET authored
[ Upstream commit 2b83ff96 ] With the current code, the following sequence won't work : echo timer > trigger echo 0 > delay_off * at this point we call ** led_delay_off_store ** led_blink_set
-
Thomas Gleixner authored
[ Upstream commit 7ad1437d ] A recent commit introduced an extra merge_attr() call in the skylake branch, which causes a memory leak. Store the pointer to the extra allocated memory and free it at the end of the function. Fixes: a5df70c3 ("perf/x86: Only show format attributes when supported") Reported-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit f7084059 ] While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by:
-
Siva Reddy Kallam authored
[ Upstream commit e60ee41a ] A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
-
Siva Reddy Kallam authored
[ Upstream commit 4419bb1c ] One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit 642a8439 ] Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty #5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit 19142551 ] Fix memory leak in tipc_enable_bearer() if enable_media() fails, and cleanup with bearer_disable() if tipc_mon_create() fails. Acked-by:
-
