- 16 Sep, 2016 15 commits
-
-
Varun Prakash authored
Add cxgb_mk_abort_req() to remove duplicate code to form CPL_ABORT_REQ hardware command. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Add cxgb_mk_close_con_req() to remove duplicate code to form CPL_CLOSE_CON_REQ hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_mk_tid_release() to remove duplicate code to form CPL_TID_RELEASE hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_compute_wscale() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
Varun Prakash authored
Add cxgb_best_mtu() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c Signed-off-by:
-
Varun Prakash authored
Add cxgb_is_neg_adv() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
Varun Prakash authored
Add cxgb_find_route6() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
Varun Prakash authored
Add cxgb_find_route() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
Varun Prakash authored
Add cxgb_get_4tuple() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
Lance Richardson authored
The ovs kernel data path currently defers the execution of all recirc actions until stack utilization is at a minimum. This is too limiting for some packet forwarding scenarios due to the small size of the deferred action FIFO (10 entries). For example, broadcast traffic sent out more than 10 ports with recirculation results in packet drops when the deferred action FIFO becomes full, as reported here: http://openvswitch.org/pipermail/dev/2016-March/067672.html Since the current recursion depth is available (it is already tracked by the exec_actions_level pcpu variable), we can use it to determine whether to execute recirculation actions immediately (safe when recursion depth is low) or defer execution until more stack space is available. With this change, the deferred action fifo size becomes a non-issue for currently failing scenarios because it is no longer used when there are three or fewer recursions through ovs_execute_actions(). Suggested-by:Pravin Shelar <pshelar@ovn.org> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
-
David S. Miller authored
Or Gerlitz says: ==================== net/sched: cls_flower: Add ports masks This series adds the ability to specify tcp/udp ports masks for TC/flower filter matches. I also removed an unused fields from the flower keys struct and clarified the format of the recently added vlan attibutes. v1--> v2 changes: * fixes typo in patch #2 title and change log (Sergei) * added acks provided by Jiri on v1 FWIW, by mistake the cover letter of V1 (but not the patches) carried V2 tag, hope this doesn't create too much confusion. ==================== Signed-off-by: -
Or Gerlitz authored
Specify the format (size and endianess) for the vlan attributes. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Commit c3f83241 "net: Add full IPv6 addresses to flow_keys" added an unused instance of struct flow_dissector_key_addrs into struct fl_flow_key, remove it. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Acked-by:
-
Or Gerlitz authored
Add the definitions for src/dst udp/tcp port masks and use them when setting && dumping the relevant keys. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Acked-by:
-
Tobias Regnery authored
In commit 9ee7b683 we moved the enablement of msi interrupts earlier in alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns with an error but msi (or msi-x) interrupts stays enabled. Add a new error label to disable msi (or msi-x) interrupts. Fixes: 9ee7b683 ("alx: refactor msi enablement and disablement") Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
-
- 15 Sep, 2016 8 commits
-
-
Hariprasad Shenai authored
The checksum provided by the device doesn't include the L3 headers, as IPv6 expects Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Jamal Hadi Salim authored
This action is intended to be an upgrade from a usability perspective from pedit (as well as operational debugability). Compare this: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action pedit munge offset -14 u8 set 0x02 \ munge offset -13 u8 set 0x15 \ munge offset -12 u8 set 0x15 \ munge offset -11 u8 set 0x15 \ munge offset -10 u16 set 0x1515 \ pipe to: sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbmod dmac 02:15:15:15:15:15 Also try to do a MAC address swap with pedit or worse try to debug a policy with destination mac, source mac and etherype. Then make few rules out of those and you'll get my point. In the future common use cases on pedit can be migrated to this action (as an example different fields in ip v4/6, transports like tcp/udp/sctp etc). For this first cut, this allows modifying basic ethernet header. The most important ethernet use case at the moment is when redirecting or mirroring packets to a remote machine. The dst mac address needs a re-write so that it doesnt get dropped or confuse an interconnecting (learning) switch or dropped by a target machine (which looks at the dst mac). And at times when flipping back the packet a swap of the MAC addresses is needed. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Misc cls_bpf/act_bpf improvements Two minor improvements to {cls,act}_bpf. For details please see individual patches. ==================== Signed-off-by: -
Daniel Borkmann authored
We have a small skb_at_tc_ingress() helper for testing for ingress, so make use of it. cls_bpf already uses it and so should act_bpf. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
The skb_mac_header_was_set() test in cls_bpf's and act_bpf's fast-path is actually unnecessary and can be removed altogether. This was added by commit a166151c ("bpf: fix bpf helpers to use skb->mac_header relative offsets"), which was later on improved by 3431205e ("bpf: make programs see skb->data == L2 for ingress and egress"). We're always guaranteed to have valid mac header at the time we invoke cls_bpf_classify() or tcf_bpf(). Reason is that since 6d1ccff6 ("net: reset mac header in dev_start_xmit()") we do skb_reset_mac_header() in __dev_queue_xmit() before we could call into sch_handle_egress() or any subsequent enqueue. sch_handle_ingress() always sees a valid mac header as well (things like skb_reset_mac_len() would badly fail otherwise). Thus, drop the unnecessary test in classifier and action case. Signed-off-by:
-
Hadar Hen Zion authored
Remove rcu_read_lock protection from tunnel_key_dump and use rtnl_dereference, dump operation is protected by rtnl lock. Also, remove rcu_read_lock from tunnel_key_release and use rcu_dereference_protected. Both operations are running exclusively and a writer couldn't modify t->params while those functions are executed. Fixes: 54d94fd89d90 ('net/sched: Introduce act_tunnel_key') Signed-off-by:John Fastabend <john.r.fastabend@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jakub Kicinski authored
Commit d5709f7a ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") made flow dissector look at vlan_proto when vlan is present. Since test_bpf sets skb->vlan_tci to ~0 (including VLAN_TAG_PRESENT) we have to populate skb->vlan_proto. Fixes false negative on test #24: test_bpf: #24 LD_PAYLOAD_OFF jited:0 175 ret 0 != 42 FAIL (1 times) Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dinan Gunawardena <dinan.gunawardena@netronome.com> Acked-by:
-
Colin Ian King authored
The newline escape is incorrect and needs fixing. Also adjust source formatting / indentation and add { } to trailing else. Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 13 Sep, 2016 17 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: ethtool enhancements Ido says: Patches 1-4 do some minor cleanup in current ethtool ops. Patch 5 replace legacy {get,set}_settings callbacks with {get,set}_link_ksettings. ==================== Signed-off-by: -
Ido Schimmel authored
Remove the deprecated {get,set}_settings callbacks and instead add {get,set}_link_ksettings along with support for newly available speeds. Signed-off-by:Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The device can support multiple port types, so don't return on first match. Signed-off-by:
-
Ido Schimmel authored
In case port isn't operational we shouldn't report the port type, but instead return PORT_OTHER. This is consistent with most other drivers that return PORT_OTHER when media type can't be determined. Signed-off-by:
-
Ido Schimmel authored
If autonegotiation was performed successfully, then we should report the link partner's advertised speeds instead of the operational speed of the port. Signed-off-by:
-
Ido Schimmel authored
Up until now the device always reported autonegotiation to be off although it was on by default. Allow the user to disable / enable autonegotiation and report its status correctly. Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:172:1: warning: symbol 'stm32_dwmac_pm_ops' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Fix missing unlock before return from function macb_start_xmit() in the error handling case. Fixes: 007e4ba3 ("net: macb: initialize checksum when using checksum offloading") Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Michael Ellerman authored
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it from powerpc-only drivers. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Wei Yongjun authored
'ub' is malloced in tipc_udp_enable() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: ba5aa84a ("tipc: split UDP nl address parsing") Signed-off-by:
-
Vivien Didelot authored
If /sbin/bridge-stp is available on the system, bridge tries to execute it instead of the kernel implementation when starting/stopping STP. If anything goes wrong with /sbin/bridge-stp, bridge silently falls back to kernel STP, making hard to debug userspace STP. This patch adds a br_stp_call_user helper to start/stop userspace STP and debug errors from the program: abnormal exit status is stored in the lower byte and normal exit status is stored in higher byte. Below is a simple example on a kernel with dynamic debug enabled: # ln -s /bin/false /sbin/bridge-stp # brctl stp br0 on br0: failed to start userspace STP (256) # dmesg br0: /sbin/bridge-stp exited with code 1 br0: failed to start userspace STP (256) br0: using kernel STP Signed-off-by:Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Javier Martinez Canillas authored
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by:
Daniele Venzano <venza@brownhat.org> Signed-off-by:
-
