soc-pcm has dpcm_set_fe_update_state() to update FE's runtime_update
(except dpcm_fe_dai_do_trigger() which needs to update it without it).
OTOH, it doesn't have BE's update function.

	O: dpcm_set_fe_update_state()
	X: dpcm_set_be_update_state()

This patch add BE's dpcm_set_fe_update_state()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zh2k7uz1.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch moves dpcm_set_fe_update_state() to top side.
This is prepare for cleanup soc-pcm.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rfw99jn.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: bytcr_rt5640: Add support for devices with only a headphone jack (no speakers/mic)" from Hans de Goede <hdegoede@redhat.com>:

Hi All,

This series adds support for devices with only a headphone jack
(no speakers/internal mic). Specifically this adds support for the
Mele PCG03 Mini PC. But the new no-speakers and no-internal-mic quirks
will likely be useful on other devices too.

Regards,

Hans

There could be more than one thread read/write the dsp_power_state
simultaneously (e.g. hda_dsp_d0i3_work and sof_ipc_tx_message), add a
mutex power_state_access to make sure the access to it is mutually
exclusive.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210105155640.3725238-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/soc-core.c: soc_remove_component() unconditionally calls
snd_soc_component_set_jack(component, NULL, NULL); on any components
being removed.

This means that on machines where the machine-driver does not provide
a jack through snd_soc_component_set_jack() es8316_disable_jack_detect()
will still get called and at this time es8316->jack will be NULL and
the es8316->jack->status check in es8316_disable_jack_detect() will
lead to a NULL pointer deref.

Fix this by checking for es8316->jack bein NULL at the start of
es8316_disable_jack_detect() and turn the function into a no-op in
that case.

Cc: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210112101725.44200-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20210108084456.6603-1-vulab@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Move the snd_soc_dai_set_tdm_slot() call from cht_codec_init() to
cht_codec_fixup(). There are 2 reasons for doing this:

1. This aligns the cht_bsw_nau8824 with all the other BYT/CHT machine
drivers which also do this from their codec_fixup function.

2. When using the SOF driver, things like the TDM info is set from the
topology file. Moving the call to the codec_fixup function, which gets
skipped when using the SOF driver avoids the call interfering with the
settings when using the SOF driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210107115324.11602-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a quirk for the Mele PCG03 Mini PC, being a Mini PC this device
has no speakers and no internal microphone.

To make matters worse the speaker output pins are shorted (to gnd or
to each other?) and SPKVDD is provided. So trying to output sound on the
speakers leads to shorting SPKVDD, this leads to a power dip after
which the codec is an unknown state. Sometimes it drops of the i2c
bus, sometimes it does still respond to i2c transfers, but is otherwise
not functional. TL;DR: trying to use the speaker outputs on this model
is BAD.

Besides not having speakers / an internal mic, this is a Bay Trail CR
device without a CHAN package in ACPI, so we default to SSP0-AIF2 as
codec connection. But the device is actually using SSP0-AIF1, so we
need to quirk that too.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-4-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some devices, like mini PCs/media/top-set boxes do not have an internal
microphone at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_INTERNAL_MIC_MAP input-mapping for this,
which does not add any internal-mic routes and modifies the components
and the (optional) long_name strings to reflect this.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-3-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.

Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.

Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: rt5645: Enable internal mic and headset on ECS EF20" from Chris Chiu <chiu@endlessos.org>:

These patches are trying to fix the jack detection and internal
microphone problems on ECS EF20 series laptops which are empowered
by Intel Atom x5-Z8350 CPU (CherryTrail) with Realtek rt5645 audio
codec.

---
  v2 -> v3:
	Restore the accidentally removed terminator of the
	dmi_platform_data[].

  v1 -> v2:
        Invoke callback() of the DMI quirk if it exists, because
        the dmi_first_match() doesn't.
---

Chris Chiu (4):
  ASoC: rt5645: Introduce mapping for ACPI-defined GPIO
  ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series
  ASoC: rt5645: add inv_hp_det flag
  ASoC: rt5645: Enable internal microphone and JD on ECS EF20

 include/sound/rt5645.h    |  2 ++
 sound/soc/codecs/rt5645.c | 45 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+)

--
2.20.1

Merge series "Enable DMA mode on Intel Keem Bay platform" from Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>:

v2: Update patch to align with latest kernel release.
v1: Initial patch version, to enable DMA mode on Intel Keembay platform.

Michael Sit Wei Hong (2):
  dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
  ASoC: Intel: KMB: Enable DMA transfer mode

 .../bindings/sound/intel,keembay-i2s.yaml     |  14 ++
 sound/soc/intel/Kconfig                       |   2 +
 sound/soc/intel/keembay/kmb_platform.c        | 157 ++++++++++++++++--
 sound/soc/intel/keembay/kmb_platform.h        |   9 +
 4 files changed, 167 insertions(+), 15 deletions(-)

--
2.17.1

The error path here doesn't set "ret" so it returns uninitialized data
instead of a negative error code.

Fixes: 2c138284 ("ASoC: soc-pcm: disconnect BEs if the FE is not ready")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/wfXQFxeMLvpO+1@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

wm_adsp_read_data_word() used if (ret) to check for an error from
wm_adsp_read_raw_data_block(). While this is perfectly valid,
wm_adsp_read_raw_data_block() itself uses if (ret < 0) and three
calls to wm_adsp_read_data_word() also use if (ret < 0).

This creates an error check chain like this:

  1st) if (ret < 0) return ret;
  2nd) if (ret) return ret;
  3rd) if (ret < 0) ...

This can confuse the compiler into thinking that there are possible
returns > 0 from the middle if() that are not handled by the final
if(). If this was true it would lead to using uninitialized variables
later in the outer function.

Fix this by changing the test in wm_adsp_read_data_word() to be
if (ret < 0).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210111133825.8758-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Kernel test robot throws below error ->

sound/soc/soc-pcm.c:2523 dpcm_run_update_startup() error: uninitialized
symbol 'ret'.

Initializing ret = 0 and returning correct -ERRNO in failure path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1610163901-5523-1-git-send-email-jrdr.linux@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

To avoid the pop noise, this patch enables the feature of fast discharge.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210111092544.9064-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch will be the workaround to fix getting the wrong device ID on the rare chance.
It seems like something unstable when the system resumes. e.g. the bus clock
This patch tries to read the device ID to check several times.
After the test, the driver will get the correct device ID the second time.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210111092740.9128-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

On ECS EF20 series laptops, the internal mic is on DMIC2/IN2P.
And they need the inv_hp_det to make jack detection to work as
exoected.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20210111054141.4668-5-chiu@endlessos.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The ECS EF20EA laptop use gpio for jack detection instead of rt5645
rt5645 JD. However, the GPIO polarity is inverse for hp-detect based
on the _DSD property of the RTK2 device.

Name (_DSD, Package () {
    ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
    Package () {
        Package () {"hp-detect-gpio", Package() {^RTK2, 0, 0, 1 }},
    }
})

This flag will invert the hp-detect gpio polarity.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20210111054141.4668-4-chiu@endlessos.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add the hp-detect gpio for ECS EF20 series laptops based on the
_CRS defined in DSDT table.

Method (_CRS, 0, NotSerialized)
{
  Name (SBUF, ResourceTemplate ()
  {
    I2cSerialBusV2 (0x001A, ControllerInitiated, 0x00061A80,
        AddressingMode7Bit, "\\_SB.PCI0.I2C2",
        0x00, ResourceConsumer, , Exclusive,
        )
    GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000,
        "\\_SB.GPO3", 0x00, ResourceConsumer, ,
        )
        {   // Pin list
            0x004F
        }
    GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly,
        "\\_SB.GPO3", 0x00, ResourceConsumer, ,
        )
        {   // Pin list
            0x004F
        }
  })
  Return (SBUF) /* \_SB_.PCI0.I2C2.RTK2._CRS.SBUF */
}
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20210111054141.4668-3-chiu@endlessos.orgSigned-off-by: Mark Brown <broonie@kernel.org>

On at least one laptop (ECS EF20EA) the 'hp-detect' GPIO is defined in
the DSDT table by the ACPI GpioIo resources in _CRS. The GPIO related
information should be mapped to the rt5645 driver to enable the jack
detection also on non-DT platforms.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20210111054141.4668-2-chiu@endlessos.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add descriptions for entries needed for audio device to use DMA
channels for audio playback and capture.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210108031248.20520-5-michael.wei.hong.sit@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable DMA transfer mode for Intel Keem Bay ASoC platform driver.

The driver will search the device tree for DMA resources at boot
time to enable DMA transfer mode, and will proceed to use DMA
transfer if the resource is available, otherwise the default PIO
mode will be used.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210108031248.20520-6-michael.wei.hong.sit@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20210108085834.7168-1-vulab@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

FE is connected to two BEs, BE1 is active, BE2 is deactive.
When closing BE1, FE/BE1 is in HW_FREE state, then BE2 is
startup by mixer runtime update.

For FE is in HW_FREE state, dpcm_run_update_startup() will skip
BE2's startup because FE's state is HW_FREE, BE2 stays in FE's
be_clients list.

During FE's closed, the dpcm_fe_dai_close() will close all related
BEs, BE2 will be closed. This will lead to BE2's dpcm[stream].users
mismatch.

We need disconnet all pending BEs in the corner case.
Signed-off-by: zhucancan <zhucancan@vivo.com>
Link: https://lore.kernel.org/r/AAoArwDfDnoefyxzy2wyiaqm.1.1608885766936.Hmail.zhucancan@vivo.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove a stale comment about SSP0 being untested, the
bytcht_es8316 has supported SSP0 for a while now and this has
been successfully tested on a GP electrinic T701 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210107120757.12051-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

CPU support for TX49xx is getting removed, so remove sound support for it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20210105140305.141401-11-tsbogend@alpha.franken.deSigned-off-by: Mark Brown <broonie@kernel.org>

bclk_ratio is unused.  Removes bclk_ratio and .set_bclk_ratio callback.

Removes snd_soc_dai_set_bclk_ratio() in a few machine drivers which are
obviously using rt1015.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201224101854.3024823-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Assuming the calibration state gets lost after system suspend.
Re-calibrates again when resuming.

The rt1015_priv is alloced by kzalloc.  No need to initialize cali_done
to 0 in component probe callback.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201225030845.4138497-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

The newly added driver requires DMA support and fails to build
when that is disabled:

aarch64-linux-ld: sound/soc/fsl/fsl_aud2htx.o: in function `fsl_aud2htx_probe':
fsl_aud2htx.c:(.text+0x3e0): undefined reference to `imx_pcm_dma_init'

Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210103135327.3630973-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The driver can request an optional clock for mclk.
Update the txt file to reflect this.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201217162740.1452000-1-aford173@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Randconfig builds often show harmless warnings like

WARNING: unmet direct dependencies detected for SND_SOC_MT6359
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && MTK_PMIC_WRAP [=n]
  Selected by [y]:
  - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y]

Add a dependency to avoid that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201230154345.639122-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Sparse will complain about trying to convert between values declared
as snd_ctl_elem_type_t and other types. This patch converts to
consistently use snd_ctl_elem_type_t for control type values. A __force
cast is needed in a couple of cases where the control type value is
parsed out of a DSP data block.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201230172427.13865-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This fixes some minor cases where u32 or unsigned int types were used
to store big-endian data, and __be32 types used to store both big-endian
and cpu-endian data. This was producing sparse warnings.

Most cases resulted from using the same variable to hold the big-endian
value and its converted cpu-endian value. These can be simply fixed by
introducing another local variable, or avoiding storing the intermediate
value back into the original variable.

One special case is the raw_buf used in the compressed streams to transfer
data from DSP to user-side. The endian conversion happens in-place (as
there's no point introducing another buffer) so a cast to (__be32 *) is
added when passing it to wm_adsp_read_raw_data_block().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201230172427.13865-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch removes the redundant delay time to speed up from the cold start
of headphone playback.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20201230080235.12698-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The series refactors rt1015.c.

The 1st patch sorts header inclusions alphabetically.

The 2nd and 3rd patch improve error handling for kcontrols.

The 4th patch enhances readability.

The 5th patch removes unused variables in rt1015_priv.

Tzung-Bi Shih (5):
  ASoC: rt1015: sort header inclusions
  ASoC: rt1015: save boost_mode only if valid
  ASoC: rt1015: return error if any when setting bypass_boost
  ASoC: rt1015: refactor retry loop and rt1015_priv allocation
  ASoC: rt1015: remove unneeded variables in rt1015_priv

 sound/soc/codecs/rt1015.c | 49 ++++++++++++++++++++-------------------
 sound/soc/codecs/rt1015.h |  4 ----
 2 files changed, 25 insertions(+), 28 deletions(-)

--
2.29.2.729.g45daf8777d-goog

- `lrck' is only used in .hw_params callback so that it can be local.
- `bclk' is unused.
- `id' is unused.
- `amp_ver' is unused.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201224100607.3006171-6-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactors retry loop in flush DAC work.  It is more clear to use a
for-loop here.

Uses !rt1015 to check if NULL.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201224100607.3006171-5-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Returns -EBUSY if DAC is using when setting bypass_boost.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201224100607.3006171-4-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Saves boost_mode only if valid.  Also returns -EINVAL if it is invalid.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201224100607.3006171-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>