- 17 Nov, 2011 7 commits
-
-
Johannes Berg authored
The shared key authentication frame that needs to be encrypted (the third one in the shared key handshake) is directly encrypted in ieee80211_send_auth and the IEEE80211_TX_INTFL_DONT_ENCRYPT is set. All others are not encrypted, so the only way to get to this is erroneously on no-monitor AP side. Remove the special case for authentication frames to fix the AP shared key side when operating without cooked monitor interfaces -- with cooked monitor the IEEE80211_TX_INTFL_DONT_ENCRYPT also gets set, so we never get here -- an AP never encrypts auth frames. Without this patch, an AP operating in WEP mode with my no-monitor patches would erroneously encrypt all authentication frames, instead of none. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Add and use pr_fmt and pr_<level> Remove useless double parentheses from macros. Remove function names from format strings, add to pr_debug use. Coalesce formats. Remove uncompileable undeclared variable in a DMA_NONE use. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Ilan Elias authored
Fix indentation in nci.h file. Signed-off-by:
Ilan Elias <ilane@ti.com> Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Remove all wlan weight macros and group it together for better understanding & readability. It makes the code reusable for AR9462 wlan weights. Signed-off-by:
-
Rajkumar Manoharan authored
This patch removes btcoex_enable from stomp type change and let it be called from callee functions that makes the code can be reusable for MCI changes. Signed-off-by:
-
-
- 11 Nov, 2011 33 commits
-
-
Johannes Berg authored
The warning is spurious -- if !sta we always exit without using the unassigned qos variable, and if we do find the sta we assign it. Signed-off-by:
-
John W. Linville authored
CC [M] drivers/net/wireless/libertas/cfg.o drivers/net/wireless/libertas/cfg.c: In function ‘lbs_ret_scan’: drivers/net/wireless/libertas/cfg.c:636:24: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result drivers/net/wireless/libertas/cfg.c: In function ‘lbs_join_post’: drivers/net/wireless/libertas/cfg.c:1766:21: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result Signed-off-by: -
John W. Linville authored
CC [M] drivers/net/wireless/brcm80211/brcmsmac/srom.o drivers/net/wireless/brcm80211/brcmsmac/srom.c: In function ‘_initvars_srom_pci’: drivers/net/wireless/brcm80211/brcmsmac/srom.c:641:6: warning: ‘val’ may be used uninitialized in this function Signed-off-by: -
Franky Lin authored
Referenced struct returned by cfg80211_inform_bss must be released with cfg80211_put_bss to avoid memory leak. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
all the devices supported or will be supported by brcmfmac do not have a PCMCIA bus core. So remove the corresponding code. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com Signed-off-by:
-
Arend van Spriel authored
In several places in dhd_sdio.c a skb packet queue was being emptied and the packets freed. This warrants to have a function in place to do this. Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function brcmu_pkt_buf_free_skb() was following the next pointer to free all linked packets. However, it is only called with unlinked packets so this can be removed. Reviewed-by:
-
Arend van Spriel authored
The functions brcmu_pkttotlen() is only used in brcmfmac driver so it has been moved there. It also does not use the sk_buff next pointer anymore but walks a skb queue to determine the total length. Reviewed-by:
-
Alwin Beukers authored
Combined mac configuration for promiscious mode and monitor mode, and removed unused monitor mode flag in pub structure. Reviewed-by:
-
Arend van Spriel authored
Instead of dealing with sk_buff prev pointers the queue functions now make use of the sk_buff_head functions provided by the kernel. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Arend van Spriel authored
The function brcmu_pkttotlen calculates the total length of a sk_buff chain following the next pointer. In brcmsmac this is not needed as in each place where it was used the provided sk_buff had a NULL pointer as next field value. Reviewed-by:
-
Franky Lin authored
sdio_chip.c is dedicated to sdio bus chip. No need to retrieve id for bus core Reviewed-by:
-
Franky Lin authored
This patch is part of the series of adding new backplane support Reviewed-by:
-
Franky Lin authored
This patch is part of the series of adding new backplane support Reviewed-by:
-
Franky Lin authored
This patch is part of the series adding new backplane support Reviewed-by:
-
Franky Lin authored
New type of backplane interconnect support is needed for bcm4330 Reviewed-by:
-
Alwin Beukers authored
Reported-by:
-
Arend van Spriel authored
The macro definition D11_PHY_HDR_LEN was defined in d11.h and pub.h. It has been removed from pub.h. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The brcmsmac had own definitions for the access categories. The mac80211 header provides these as well as they are used in the conf_tx callback. As the definitions did not match the driver configured the tx parameters to the wrong queue. Reviewed-by:
-
Arend van Spriel authored
There were a couple of code segments left that were placed under a macro definition that was not applicable or not used in the brcmsmac driver. These pieces of code have been removed. Reviewed-by:
-
Arend van Spriel authored
This fixes issue when using OTP memory. It was introduced by following commit: commit 028f78d4 Author: Arend van Spriel <arend@broadcom.com> Date: Fri Oct 21 16:16:35 2011 +0200 brcm80211: smac: change buffer endianess convert function interface Signed-off-by:
-
Don Fry authored
The nvm_device_type is eeprom related and does not need to be part of the iwl_priv structure. Move it and eliminate access to the iwl_priv structure. Signed-off-by:
Don Fry <donald.h.fry@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Don Fry authored
Make the eeprom routines less dependent on the iwl_priv structure. Don't use the priv when bus structure is sufficient. Signed-off-by:
-
Venkataraman, Meenakshi authored
iwlwifi tries to avoid using antenna B in BT combo devices when BT is active. A bug in the rate-scaling algorithm was causing the combo device to never attempt MIMO rates. Fix the algorithm to opportunistically try MIMO rates when BT traffic is low. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Users complain that the traffic gets stalled sometimes. This will allow easier debugging. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This bit was used only once. Use IWL_DL_INFO instead. Signed-off-by:
-
Johannes Berg authored
Due to the P2P context always having the associated bit set when we got to this code, we were splitting up the remain-on-channel durations unconditionally. This isn't needed -- if the P2P context is in P2P device type mode it doesn't impose restrictions on timing to skip it in that case. Signed-off-by:
-
Johannes Berg authored
The device expects TU but we get ms, so convert. Signed-off-by:
-
Emmanuel Grumbach authored
Warning introduced by c847474b7dfdda304d0d8ffcc5a9db546b1cb3e9 iwlwifi: check status before send command Signed-off-by:
-
Wey-Yi Guy authored
Check the status before sending host command, if any of the condition match, cancel the host command before queue Signed-off-by:
-
Wey-Yi Guy authored
"echo" host command has no data, set the length to 0 Signed-off-by:
-
Wey-Yi Guy authored
The core suspend function is part of agn, iwl_mac80211 should only handle mac80211 I/F operations. Signed-off-by:
-
Wey-Yi Guy authored
The station related mac80211 callback functions should belong to _mac80211 Signed-off-by:
-
