- 22 Apr, 2020 40 commits
-
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit be40920f ] When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122a ("perf tools: Let O= makes handle relative paths") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Torsten Hilbrich authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 2a9de3af upstream. The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address. In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked. Using the same goto-label discard in this case to fix this problem. Fixes: ed1efb2a ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 4c59406e upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9d ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit a1a7e3a3 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25 ("[IPSEC]: Sync series - acquire insert") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 171d449a upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Nicolas Dichtel authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f1ed1026 upstream. I forgot the 4in6/6in4 cases in my previous patch. Let's fix them. Fixes: 95224166 ("vti[6]: fix packet tx through bpf_redirect()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Edward Cree authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit df81dfcf upstream. The handling of notify->work did not properly maintain notify->kref in two cases: 1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one. 2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put. Fix both by checking the return values of the work handling functions (schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work. Fixes: cd7eab44 ("genirq: Add IRQ affinity notifiers") Fixes: 59c39840 ("genirq: Prevent use-after-free and work list corruption") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ben Hutchings <ben@decadent.org.uk> Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit b16798f5 upstream. If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Martin K. Petersen authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit ea697a8b upstream. Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported. Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed. Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts. Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com Cc: Bryan Gurney <bgurney@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Bernhard Sulzer <micraft.b@gmail.com> Tested-by: Bernhard Sulzer <micraft.b@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Dirk Mueller authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit e33a814e upstream. gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by: Dirk Mueller <dmueller@suse.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> [nc: Also apply to dtc-lexer.lex.c_shipped due to a lack of e039139b, where dtc-lexer.l started being used] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 1efde275 upstream. Do not depend on dwfl_module_addrsym() because it can fail on user-space shared libraries. Actually, same bug was fixed by commit 664fee3d ("perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit 07d36985 ("perf probe: Fix wrong address verification) reverted to get actual symbol address from symtab. This fixes it again by getting symbol address from DIE, and only if the DIE has only address range, it uses dwfl_module_addrsym(). Fixes: 07d36985 ("perf probe: Fix wrong address verification) Reported-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Alexandre Ghiti <alex@ghiti.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit e1b9f99f upstream. The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Dominik Czarnota authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit f3cc008b ] This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in: strncmp(opt, "eee_timer:", 6) the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:". This bug doesn't seem to have any security impact since its present in module's cmdline parsing code. Signed-off-by: Dominik Czarnota <dominik.b.czarnota@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Nicolas Cavallari authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit ba32679c ] When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.frSigned-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Wen Xiong authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 394b6171 ] When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.comSigned-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Madalin Bucur authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 26d5bb9e ] FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Mike Gilbert authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 2de7fb60 ] Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462Signed-off-by: Mike Gilbert <floppym@gentoo.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 28d35bcd ] When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Matthew Wilcox authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit b76ba4af ] radix_tree_is_indirect_ptr() is an internal API. The correct call to use is radix_tree_deref_retry() which has the appropriate unlikely() annotation. Fixes: c6400ba7 ("drivers/hwspinlock: fix race between radix tree insertion and lookup") Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: Neil Brown <neilb@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit c4409905 ] Re-execution after an emulation decode failure is only intended to handle a case where two or vCPUs race to write a shadowed page, i.e. we should never re-execute an instruction as part of MMIO emulation. As handle_ept_misconfig() is only used for MMIO emulation, it should pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid. And because the cr2 value passed to x86_emulate_instruction() is only destined for use when retrying or reexecuting, we can simply call emulate_instruction(). Fixes: d391f120 ("x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested") Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Jonas Gorski authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit efc45154 ] Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h. The comment makes it clear the intention was to allow partial definition with either parts. This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO. Fixes: 4a91cb61 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Alaa Hleihel authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 14fa91e0 ] netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event multiple times until all refs are gone, which will result in calling ipoib_delete_debug_files multiple times and printing a warning. Remove the WARN_ONCE since checks of NULL pointers before calling debugfs_remove are not needed. Fixes: 771a5258 ("IB/IPoIB: ibX: failed to create mcg debug file") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Eugenio Pérez authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 42d84c84 ] Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 09e91dbe ] The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit ca19c70f ] The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 173756b8 ] hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 384d91c2 ] gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer")` Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Oliver Hartkopp authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 2091a3d4 ] As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. This patch is a 1:1 copy of upstream slip.c commit f596c870 ("slip: not call free_netdev before rtnl_unlock in slip_open"). Reported-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 0dcdf9f6 ] The nci_conn_max_data_pkt_payload_size() function sometimes returns -EPROTO so "max_size" needs to be signed for the error handling to work. We can make "payload_size" an int as well. Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 0d1c3530 ] In commit 599be01e ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash(). Reported-and-tested-by: syzbot+dcc34d54d68ef7d2d53d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+c72da7b9ed57cde6fca2@syzkaller.appspotmail.com Fixes: 599be01e ("net_sched: fix an OOB access in cls_tcindex") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit ef299cc3 ] route4_change() allocates a new filter and copies values from the old one. After the new filter is inserted into the hash table, the old filter should be removed and freed, as the final step of the update. However, the current code mistakenly removes the new one. This looks apparently wrong to me, and it causes double "free" and use-after-free too, as reported by syzbot. Reported-and-tested-by: syzbot+f9b32aaacd60305d9687@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+2f8c233f131943d6056d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9c2df9fd5e9445b74e01@syzkaller.appspotmail.com Fixes: 1109c005 ("net: sched: RCU cls_route") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 0e62f543 ] When both the switch and the bridge are learning about new addresses, switch ports attached to the bridge would see duplicate ARP frames because both entities would attempt to send them. Fixes: 5037d532 ("net: dsa: add Broadcom tag RX/TX handler") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 3a303cfd ] The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 9765635b upstream. This reverts commit: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") ugh. In drm_dp_destroy_connector_work(), we have a pretty good chance of freeing the actual struct drm_dp_mst_port. However, after destroying things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is where the problems start. For i915, this calls all the way down to the fbcon probing helpers, which start trying to access the port in a modeset. [ 45.062001] ================================================================== [ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180 [ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53 [ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3 [ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper] [ 45.062641] Call Trace: [ 45.062685] dump_stack+0xbd/0x15a [ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 45.062801] ? printk+0x9f/0xc5 [ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 45.062909] ? ex_handler_refcount+0x146/0x180 [ 45.062970] print_address_description+0x71/0x239 [ 45.063036] ? ex_handler_refcount+0x146/0x180 [ 45.063095] kasan_report.cold.5+0x242/0x30b [ 45.063155] __asan_report_store4_noabort+0x1c/0x20 [ 45.063313] ex_handler_refcount+0x146/0x180 [ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0 [ 45.063428] fixup_exception+0x98/0xd7 [ 45.063484] ? raw_notifier_call_chain+0x20/0x20 [ 45.063548] do_trap+0x6d/0x210 [ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063732] do_error_trap+0xc0/0x170 [ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063929] do_invalid_op+0x3b/0x50 [ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064103] invalid_op+0x14/0x20 [ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f [ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282 [ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968 [ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8 [ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3 [ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28 [ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8 [ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper] [ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915] [ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915] [ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915] [ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915] [ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915] [ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915] [ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper] [ 45.066054] ? kasan_check_write+0x14/0x20 [ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915] [ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915] [ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915] [ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915] [ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm] [ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm] [ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper] [ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper] [ 45.067249] ? kasan_check_read+0x11/0x20 [ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper] [ 45.067364] ? kasan_check_read+0x11/0x20 [ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper] [ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper] [ 45.067508] ? kasan_check_write+0x14/0x20 [ 45.070360] ? mutex_unlock+0x22/0x40 [ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper] [ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper] [ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915] [ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper] [ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915] [ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper] [ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper] [ 45.095851] ? kasan_check_write+0x14/0x20 [ 45.098473] ? kasan_check_read+0x11/0x20 [ 45.101155] ? strscpy+0x17c/0x530 [ 45.103808] ? __switch_to_asm+0x34/0x70 [ 45.106456] ? syscall_return_via_sysret+0xf/0x7f [ 45.109711] ? read_word_at_a_time+0x20/0x20 [ 45.113138] ? __switch_to_asm+0x40/0x70 [ 45.116529] ? __switch_to_asm+0x34/0x70 [ 45.119891] ? __switch_to_asm+0x40/0x70 [ 45.123224] ? __switch_to_asm+0x34/0x70 [ 45.126540] ? __switch_to_asm+0x34/0x70 [ 45.129824] process_one_work+0x88d/0x15d0 [ 45.133172] ? pool_mayday_timeout+0x850/0x850 [ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128 [ 45.139739] ? wake_q_add+0xb0/0xb0 [ 45.143010] ? check_preempt_wakeup+0x652/0x1050 [ 45.146304] ? worker_enter_idle+0x29e/0x740 [ 45.149589] ? __schedule+0x1ec0/0x1ec0 [ 45.152937] ? kasan_check_read+0x11/0x20 [ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130 [ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 45.162542] ? kasan_check_write+0x14/0x20 [ 45.165657] worker_thread+0x1a5/0x1470 [ 45.168725] ? set_load_weight+0x2e0/0x2e0 [ 45.171755] ? process_one_work+0x15d0/0x15d0 [ 45.174806] ? __switch_to_asm+0x34/0x70 [ 45.177645] ? __switch_to_asm+0x40/0x70 [ 45.180323] ? __switch_to_asm+0x34/0x70 [ 45.182936] ? __switch_to_asm+0x40/0x70 [ 45.185539] ? __switch_to_asm+0x34/0x70 [ 45.188100] ? __switch_to_asm+0x40/0x70 [ 45.190628] ? __schedule+0x7d4/0x1ec0 [ 45.193143] ? save_stack+0xa9/0xd0 [ 45.195632] ? kasan_check_write+0x10/0x20 [ 45.198162] ? kasan_kmalloc+0xc4/0xe0 [ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190 [ 45.203046] ? kthread+0x9f/0x3b0 [ 45.205470] ? ret_from_fork+0x35/0x40 [ 45.207876] ? unwind_next_frame+0x43/0x50 [ 45.210273] ? __save_stack_trace+0x82/0x100 [ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580 [ 45.215026] ? default_wake_function+0x35/0x50 [ 45.217399] ? kasan_check_read+0x11/0x20 [ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140 [ 45.222174] ? __lock_text_start+0x8/0x8 [ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f [ 45.226868] ? __kthread_parkme+0x87/0xf0 [ 45.229200] kthread+0x2f7/0x3b0 [ 45.231557] ? process_one_work+0x15d0/0x15d0 [ 45.233923] ? kthread_park+0x120/0x120 [ 45.236249] ret_from_fork+0x35/0x40 [ 45.240875] Allocated by task 242: [ 45.243136] save_stack+0x43/0xd0 [ 45.245385] kasan_kmalloc+0xc4/0xe0 [ 45.247597] kmem_cache_alloc_trace+0xdd/0x190 [ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper] [ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper] [ 45.259200] process_one_work+0x88d/0x15d0 [ 45.261597] worker_thread+0x1a5/0x1470 [ 45.264038] kthread+0x2f7/0x3b0 [ 45.266371] ret_from_fork+0x35/0x40 [ 45.270937] Freed by task 53: [ 45.273170] save_stack+0x43/0xd0 [ 45.275382] __kasan_slab_free+0x139/0x190 [ 45.277604] kasan_slab_free+0xe/0x10 [ 45.279826] kfree+0x99/0x1b0 [ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper] [ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper] [ 45.286660] process_one_work+0x88d/0x15d0 [ 45.288934] worker_thread+0x1a5/0x1470 [ 45.291231] kthread+0x2f7/0x3b0 [ 45.293547] ret_from_fork+0x35/0x40 [ 45.298206] The buggy address belongs to the object at ffff8882b4b70968 which belongs to the cache kmalloc-2k of size 2048 [ 45.303047] The buggy address is located 0 bytes inside of 2048-byte region [ffff8882b4b70968, ffff8882b4b71168) [ 45.308010] The buggy address belongs to the page: [ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0 [ 45.313051] flags: 0x8000000000010200(slab|head) [ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40 [ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 45.320966] page dumped because: kasan: bad access detected [ 45.326312] Memory state around the buggy address: [ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 45.337302] ^ [ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.345748] ================================================================== So, this definitely isn't a fix that we want. This being said; there's no real easy fix for this problem because of some of the catch-22's of the MST helpers current design. For starters; we always need to validate a port with drm_dp_get_validated_port_ref(), but validation relies on the lifetime of the port in the actual topology. So once the port is gone, it can't be validated again. If we were to try to make the payload helpers not use port validation, then we'd cause another problem: if the port isn't validated, it could be freed and we'd just start causing more KASAN issues. There are already hacks that attempt to workaround this in drm_dp_mst_destroy_connector_work() by re-initializing the kref so that it can be used again and it's memory can be freed once the VCPI helpers finish removing the port's respective payloads. But none of these really do anything helpful since the port still can't be validated since it's gone from the topology. Also, that workaround is immensely confusing to read through. What really needs to be done in order to fix this is to teach DRM how to track the lifetime of the structs for MST ports and branch devices separately from their lifetime in the actual topology. Simply put; this means having two different krefs-one that removes the port/branch device from the topology, and one that finally calls kfree(). This would let us simplify things, since we'd now be able to keep ports around without having to keep them in the topology at the same time, which is exactly what we need in order to teach our VCPI helpers to only validate ports when it's actually necessary without running the risk of trying to use unallocated memory. Such a fix is on it's way, but for now let's play it safe and just revert this. If this bug has been around for well over a year, we can wait a little while to get an actual proper fix here. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org # v4.6+ Acked-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Cristian Marussi authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit d0bab0c3 upstream. On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c1 ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 3b36b13d upstream. Commit 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8d677436 upstream. The recent futex inode life time fix changed the ordering of the futex key union struct members, but forgot to adjust the hash function accordingly, As a result the hashing omits the leading 64bit and even hashes beyond the futex key causing a bad hash distribution which led to a ~100% performance regression. Hand in the futex key pointer instead of a random struct member and make the size calculation based of the struct offset. Fixes: 8019ad13 ("futex: Fix inode life-time issue") Reported-by: Rong Chen <rong.a.chen@intel.com> Decoded-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rong Chen <rong.a.chen@intel.com> Link: https://lkml.kernel.org/r/87h7yy90ve.fsf@nanos.tec.linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8019ad13 upstream. As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by: Jann Horn <jannh@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 82f2bc2f upstream. Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when casting to enums. The kernel does this in certain places, such as device tree matches to set the version of the device being used, which allows the kernel to avoid using a gigantic union. https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428 https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402 https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264 To avoid a ton of false positive warnings, disable this particular part of the warning, which has been split off into a separate diagnostic so that the entire warning does not need to be turned off for clang. It will be visible under W=1 in case people want to go about fixing these easily and enabling the warning treewide. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/887 Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Anthony Mallet authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit b401f8c4 ] By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
-