- 28 Aug, 2024 7 commits
-
-
Karthik Poosa authored
WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16 parameter instead of u32. This change prevents potential illegal sub-command errors. v2: Mask uval instead of changing the prototype. (Badal) v3: Rephrase commit message. (Badal) Signed-off-by:
Karthik Poosa <karthik.poosa@intel.com> Fixes: 92d44a42 ("drm/xe/hwmon: Expose card reactive critical power") Reviewed-by:
Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.comSigned-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ilia Levi authored
The kernel lrc is used solely by the execlist infra. Move it to the execlist port struct and initialize it only when execlists are used. v2: Rebase, improve error handling readability (Jonathan) Signed-off-by:
Ilia Levi <ilia.levi@intel.com> Reviewed-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826100655.1719060-1-ilia.levi@intel.comSigned-off-by:
-
Balasubramani Vivekanandan authored
Battlemage platform is sufficiently tested and found stable. CI is also pretty stable. Remove the force_probe requirement to enable the platform support by default. Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.comSigned-off-by:
-
Himal Prasad Ghimiray authored
Make sure that ggtt_node_remove() is invoked only if both node and ggtt are not null. Move the null checks to the caller function xe_ggtt_node_remove(). v2: Move null check below declarations (Tejas) Fixes: 919bb54e ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.comSigned-off-by:
-
Thomas Hellström authored
For non-d3cold-capable devices we'd like to be able to wake up the device from reclaim. In particular, for Lunar Lake we'd like to be able to blit CCS metadata to system at shrink time; at least from kswapd where it's reasonable OK to wait for rpm resume and a preceding rpm suspend. Therefore use a separate lockdep map for such devices and prime it reclaim-tainted. v2: - Rename lockmap acquire- and release functions. (Rodrigo Vivi). - Reinstate the old xe_pm_runtime_lockdep_prime() function and rename it to xe_rpm_might_enter_cb(). (Matthew Auld). - Introduce a separate xe_pm_runtime_lockdep_prime function called from module init for known required locking orders. v3: - Actually hook up the prime function at module init. v4: - Rebase. v5: - Don't use reclaim-safe RPM with sriov. Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com> Cc: "Auld, Matthew" <matthew.auld@intel.com> Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
-
Nirmoy Das authored
Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this flag. This reverts commit decbfaf0. Cc: Christian König <christian.koenig@amd.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
-
Nirmoy Das authored
This optimization relied on having to clear CCS on allocations. If there is no need to clear CCS on allocations then this would mostly help in reducing CPU utilization. Revert this patch at this moment because of: 1 Currently Xe can't do clear on free and using a invalid ttm flag, TTM_TT_FLAG_CLEARED_ON_FREE which could poison global ttm pool on multi-device setup. 2 Also for LNL CPU:WB doesn't require clearing CCS as such BO will not be allowed to bind with compression PTE. Subsequent patch will disable clearing CCS for CPU:WB BOs for LNL. This reverts commit 23683061. Cc: Christian König <christian.koenig@amd.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
-
- 27 Aug, 2024 5 commits
-
-
Thomas Zimmermann authored
Setting 'nomodeset' on the kernel command line disables all graphics drivers with modesetting capabilities, leaving only firmware drivers, such as simpledrm or efifb. Most DRM drivers automatically support 'nomodeset' via DRM's module helper macros. In xe, which uses regular module_init(), manually call drm_firmware_drivers_only() to test for 'nomodeset'. Do not register the driver if set. v2: - use xe's init table (Lucas) - do NULL test for init/exit functions Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Himal Prasad Ghimiray authored
dma_fence_chain_free() can handle NULL input, there is no need for NULL check by caller. Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Jagmeet Randhawa <jagmeet.randhawa@intel.com> Reviewed-by:
-
Himal Prasad Ghimiray authored
dma_fence_put() and dma_fence_chain_free() can handle NULL input, there is no need for NULL check by caller. Signed-off-by:
-
Himal Prasad Ghimiray authored
drm_sched_job_add_dependency() drops references even in case of error, no need for caller to call dma_fence_put. Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by:
-
Lucas De Marchi authored
Lunar Lake has been usable for a while in a desktop setup. Bugs are sporadically showing up in CI, but being promptly fixed. Nothing very concerning. All the uapi changes related to fundamental platform usage have been finalized. Remove the force_probe requirement and enable the platform by default. Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
- 26 Aug, 2024 1 commit
-
-
Apoorva Singh authored
- lrc->bo NULL check is not needed in xe_lrc_snapshot_capture() as its already been taken care of in xe_lrc_init(). Signed-off-by:
Apoorva Singh <apoorva.singh@intel.com> Acked-by:
-
- 24 Aug, 2024 1 commit
-
-
Nathan Chancellor authored
Clang warns (or errors with CONFIG_DRM_WERROR or CONFIG_WERROR): drivers/gpu/drm/xe/xe_ggtt.c:810:3: error: variable 'total' is uninitialized when used here [-Werror,-Wuninitialized] 810 | total += hole_size; | ^~~~~ drivers/gpu/drm/xe/xe_ggtt.c:798:11: note: initialize the variable 'total' to silence this warning 798 | u64 total; | ^ | = 0 1 error generated. Move the zero initialization of total from xe_gt_sriov_pf_config_print_available_ggtt() to xe_ggtt_print_holes() to resolve the warning. Fixes: 13636729 ("drm/xe: Introduce xe_ggtt_print_holes") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
-
- 23 Aug, 2024 9 commits
-
-
Vinod Govindapillai authored
In XE, display runtime suspend / resume routines are called only if d3cold is allowed. This makes the driver unable to detect any HPDs once the device goes into runtime suspend state in platforms like LNL. Update the display runtime suspend / resume routines to include HPD polling regardless of d3cold status. While xe_display_pm_suspend/resume() performs steps during runtime suspend/resume that shouldn't happen, like suspending MST and they are missing other steps like enabling DC9, this patchset is meant to keep the current behavior wrt. these, leaving the corresponding updates for a follow-up v2: have a separate function for display runtime s/r (Rodrigo) v3: better streamlining of system s/r and runtime s/r calls (Imre) v4: rebased Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com
-
Imre Deak authored
This is a preparation for the follow-up patch where polling will be handled properly for all cases during runtime suspend/resume. v2: rebased Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
Enable/Disable user access only during system suspend/resume. This should not happen during runtime s/r v2: rebased Reviewed-by:
-
Matthew Brost authored
Preferred way to create kernel BOs is xe_managed_bo_create_pin_map, use it. Signed-off-by:
-
Matthew Brost authored
Kernel BOs are destroyed with GGTT mappings, this is hardware interaction so use devm. Signed-off-by:
-
Matthew Brost authored
Not a big deal if CT is down as driver is unloading, no need to warn. Signed-off-by:
-
Matthew Brost authored
The guc_fini_hw registered calls __xe_uc_fw_status which is only expected to be called after initializing fw state. Move this before registering guc_fini_hw. Signed-off-by:
-
Matthew Brost authored
ggtt->scratch is destroyed via devm, ggtt_fini sets ggtt->scratch to NULL, ggtt->scratch in GGTT clears, so ensure ggtt->scratch is set NULL before the BO is destroyed. Signed-off-by:
-
Matthew Brost authored
This reverts commit 40520283. We can't install dma-fence-chain in timeline sync objs. Signed-off-by:
-
- 22 Aug, 2024 14 commits
-
-
Rodrigo Vivi authored
Defer the ggtt node removal to a thread if runtime_pm is not active. The ggtt node removal can be called from multiple places, including places where we cannot protect with outer callers and places we are within other locks. So, try to grab the runtime reference if the device is already active, otherwise defer the removal to a separate thread from where we are sure we can wake the device up. v2: - use xe wq instead of system wq (Matt and CI) - Avoid GFP_KERNEL to be future proof since this removal can be called from outside our drivers and we don't want to block if atomic is needed. (Brost) v3: amend forgot chunk declaring xe_device. v4: Use a xe_ggtt_region to encapsulate the node and remova info, wihtout the need for any memory allocation at runtime. v5: Actually fill the delayed_removal.invalidate (Brost) v6: - Ensure that ggtt_region is not freed before work finishes (Auld) - Own wq to ensures that the queued works are flushed before ggtt_fini (Brost) v7: also free ggtt_region on early !bound return (Auld) v8: Address the null deref (CI) v9: Based on the new xe_ggtt_node for the proper care of the lifetime of the object. v10: Redo the lost v5 change. (Brost) v11: Simplify the invalidate_on_remove (Lucas) Cc: Matthew Auld <matthew.auld@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: -
Rodrigo Vivi authored
In some rare cases, the drm_mm node cannot be removed synchronously due to runtime PM conditions. In this situation, the node removal will be delegated to a workqueue that will be able to wake up the device before removing the node. However, in this situation, the lifetime of the xe_ggtt_node cannot be restricted to the lifetime of the parent object. So, this patch introduces the infrastructure so the xe_ggtt_node struct can be allocated in advance and freed when needed. By having the ggtt backpointer, it also ensure that the init function is always called before any attempt to insert or reserve the node in the GGTT. v2: s/xe_ggtt_node_force_fini/xe_ggtt_node_fini and use it internaly (Brost) v3: - Use GF_NOFS for node allocation (CI) - Avoid ggtt argument, now that we have it inside the node (Lucas) - Fix some missed fini cases (CI) v4: - Fix SRIOV critical case where config->ggtt_region was lost (Michal) - Avoid ggtt argument also on removal (missed case on v3) (Michal) - Remove useless checks (Michal) - Return 0 instead of negative errno on a u32 addr. (Michal) - s/xe_ggtt_assign/xe_ggtt_node_assign for coherence, while we are touching it (Michal) v5: - Fix VFs' ggtt_balloon Cc: Matthew Auld <matthew.auld@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: -
Rodrigo Vivi authored
These operations are related to node. Convert them to the new appropriate name space xe_ggtt_node. v2: Also move arguments around for consistency (Lucas). v3: s/node_balloon/node_insert_balloon and s/node_deballoon/node_remove_balloon (Michal). Reviewed-by: -
Rodrigo Vivi authored
Introduce a new xe_ggtt_print_holes helper that attends the SRIOV demand and finishes the goal of limiting drm_mm access to xe_ggtt. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Introduce a new xe_ggtt_largest_hole helper that attends the SRIOV demand and continue with the goal of limiting drm_mm access to xe_ggtt. v2: Fix a typo (Michal) Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Continue with the encapsulation of drm_mm_node inside xe_ggtt. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Bring some consistency and prepare for more xe_ggtt_node related functions to be introduced. Reviewed-by:
-
Rodrigo Vivi authored
The xe_ggtt component uses drm_mm to manage the GGTT. The drm_mm_node is just a node inside drm_mm, but in Xe we use that only in the GGTT context. So, this patch encapsulates the drm_mm_node into a xe_ggtt's new struct. This is the first step towards limiting all the drm_mm access through xe_ggtt. The ultimate goal is to have a better control of the node insertion and removal, so the removal can be delegated to a delayed workqueue. v2: Fix includes and typos (Michal and Brost) Reviewed-by:
-
Rodrigo Vivi authored
DPT code is so dependent on i915 vma implementation and it is not ported yet to Xe. This patch limits inspection to DPT's VMA struct to intel_dpt component only, so the Xe GGTT code can evolve. Cc: Matthew Brost <matthew.brost@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
Rodrigo Vivi authored
These includes are no longer necessary, and where appropriate are replaced by the linux/types.h one. Reviewed-by:
-
Rodrigo Vivi authored
Document xe_ggtt and ensure it is part of the built kernel docs. v2: - Accepted all Michal's suggestions - Rebased on top of new set_pte per platform/wa function pointer v3: - Typos and other acronym fixes (Michal) Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> #v1 Reviewed-by: -
Rodrigo Vivi authored
Apparently this was only useful when enabling ggtt support for the very first time and never used again. It is also not useful now that we have the ggtt_dump available through debugfs. Reviewed-by:
-
Matthew Auld authored
kzalloc expects number of bytes, therefore we should convert the number of dw into bytes, otherwise we are likely just accessing beyond the array causing all kinds of carnage. Also fixup the error handling while we are here. v2: - Prefer kcalloc (dim) Fixes: 3338e4f9 ("drm/xe: Use topology to determine page fault queue size") Signed-off-by:
-
Matthew Brost authored
Testing on LNL has shown media GT's TLBs need to be invalidated via the GuC, update PT code appropriately. v2: - Do dma_fence_get before first call of invalidation_fence_init (Himal) - No need to check for valid chain fence (Himal) Fixes: 33303615 ("drm/xe/lnl: Add LNL platform definition") Signed-off-by:
-
- 21 Aug, 2024 2 commits
-
-
Matthew Brost authored
Testing on LNL has shown media TLBs need to be invalidated via the GuC, update xe_vm_invalidate_vma appropriately. v2: Fix 2 tile case v3: Include missing local change Fixes: 33303615 ("drm/xe/lnl: Add LNL platform definition") Signed-off-by:
-
Matthew Brost authored
Free job depends on job->vm being valid, the last xe_exec_queue_put can destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
- 20 Aug, 2024 1 commit
-
-
Matthew Brost authored
The HW fence ctx objects are not ref counted rather tied to the life of an LRC object. HW fences reference the HW fence ctx, HW fences can outlive LRCs thus resulting in UAF. Drop the HW fence pointer to HW fence ctx rather just store what is needed directly in HW fence. v2: - Fix typo in commit (Ashutosh) - Use snprintf (Ashutosh) Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
