- 31 May, 2019 40 commits
-
-
Guenter Roeck authored
[ Upstream commit 8c082675 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
John Garry <john.garry@huawei.com> Cc: John Garry <john.garry@huawei.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit d6410408 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
-
Guenter Roeck authored
[ Upstream commit 14b97ba5 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81 ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a6d2a5a9 ] Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Vincenzo Frascino authored
[ Upstream commit 81fb8736 ] clock_getres() in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; where 'hrtimer_resolution' depends on whether or not high resolution timers are enabled, which is a runtime decision. The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this by exposing 'hrtimer_resolution' in the vDSO datapage and returning that instead. Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> [will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Nicholas Nunley authored
[ Upstream commit bfb0ebed ] Modifying the VLAN stripping options when a port VLAN is configured will break traffic for the VSI, and conceptually doesn't make sense, so don't allow this. Signed-off-by:
Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 7dbcf2b0 ] Commit 37fe6a42 ("x86: Check stack overflow in detail") added a broad check for the full exception stack area, i.e. it considers the full exception stack area as valid. That's wrong in two aspects: 1) It does not check the individual areas one by one 2) #DF, NMI and #MCE are not enabling interrupts which means that a regular device interrupt cannot happen in their context. In fact if a device interrupt hits one of those IST stacks that's a bug because some code path enabled interrupts while handling the exception. Limit the check to the #DB stack and consider all other IST stacks as 'overflow' or invalid. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190414160143.682135110@linutronix.deSigned-off-by:
-
Alan Stern authored
[ Upstream commit 381419fa ] The SCSI core does not like to have devices or hosts unregistered while error recovery is in progress. Trying to do so can lead to self-deadlock: Part of the removal code tries to obtain a lock already held by the error handler. This can cause problems for the usb-storage and uas drivers, because their error handler routines perform a USB reset, and if the reset fails then the USB core automatically goes on to unbind all drivers from the device's interfaces -- all while still in the context of the SCSI error handler. As it turns out, practically all the scenarios leading to a USB reset failure end up causing a device disconnect (the main error pathway in usb_reset_and_verify_device(), at the end of the routine, calls hub_port_logical_disconnect() before returning). As a result, the hub_wq thread will soon become aware of the problem and will unbind all the device's drivers in its own context, not in the error-handler's context. This means that usb_reset_device() does not need to call usb_unbind_and_rebind_marked_interfaces() in cases where usb_reset_and_verify_device() has returned an error, because hub_wq will take care of everything anyway. This particular problem was observed in somewhat artificial circumstances, by using usbfs to tell a hub to power-down a port connected to a USB-3 mass storage device using the UAS protocol. With the port turned off, the currently executing command timed out and the error handler started running. The USB reset naturally failed, because the hub port was off, and the error handler deadlocked as described above. Not carrying out the call to usb_unbind_and_rebind_marked_interfaces() fixes this issue. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Kento Kobayashi <Kento.A.Kobayashi@sony.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 5b61d50a ] Bit shift in scale_load() could overflow shares. This patch saturates it to MAX_SHARES like following sched_group_set_shares(). Example: # echo 9223372036854776832 > cpu.shares # cat cpu.shares Before patch: 1024 After pattch: 262144 Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzzSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 1a8b4540 ] Large values could overflow u64 and pass following sanity checks. # echo 18446744073750000 > cpu.cfs_period_us # cat cpu.cfs_period_us 40448 # echo 18446744073750000 > cpu.cfs_quota_us # cat cpu.cfs_quota_us 40448 After this patch they will fail with -EINVAL. Signed-off-by:
-
Nathan Lynch authored
[ Upstream commit 2d4d9b30 ] When booted with "topology_updates=no", or when "off" is written to /proc/powerpc/topology_updates, NUMA reassignments are inhibited for PRRN and VPHN events. However, migration and suspend unconditionally re-enable reassignments via start_topology_update(). This is incoherent. Check the topology_updates_enabled flag in start/stop_topology_update() so that callers of those APIs need not be aware of whether reassignments are enabled. This allows the administrative decision on reassignments to remain in force across migrations and suspensions. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit c1ced46c ] The ctrl_check_input() function is called from pvr2_ctrl_range_check(). It's supposed to validate user supplied input and return true or false depending on whether the input is valid or not. The problem is that negative shifts or shifts greater than 31 are undefined in C. In practice with GCC they result in shift wrapping so this function returns true for some inputs which are not valid and this could result in a buffer overflow: drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname() warn: uncapped user index 'names[val]' The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create() and the highest valid bit is BIT(4). Fixes: 7fb20fa3 ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Shuah Khan authored
[ Upstream commit 898bc40b ] Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 70c4cf17 ] In audit_rule_change(), audit_data_to_entry() is firstly invoked to translate the payload data to the kernel's rule representation. In audit_data_to_entry(), depending on the audit field type, an audit tree may be created in audit_make_tree(), which eventually invokes kmalloc() to allocate the tree. Since this tree is a temporary tree, it will be then freed in the following execution, e.g., audit_add_rule() if the message type is AUDIT_ADD_RULE or audit_del_rule() if the message type is AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor AUDIT_DEL_RULE, i.e., the default case of the switch statement, this temporary tree is not freed. To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE or AUDIT_DEL_RULE. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit bccb89cf ] This driver returns an error if unsupported media bus pixel code is requested by VIDIOC_SUBDEV_S_FMT. But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst, Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. So select default format code and return success in that case. This is detected by v4l2-compliance. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit f604f0f5 ] If the application was streaming from both videoX and vbiX, and streaming from videoX was stopped, then the vbi streaming also stopped. The cause being that stop_streaming for video stopped the subdevs as well, instead of only doing that if dev->streaming_users reached 0. au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs at all when dev->streaming_users reached 0. Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit ccdd85d5 ] In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit bbeefa73 ] The error return value is not written by some firmware codecs, such as MPEG-2 decode on CodaHx4. Clear the error return value before starting the picture run to avoid misinterpreting unrelated values returned by sequence initialization as error return value. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Nicolas Ferre authored
[ Upstream commit e2c114c0 ] Even if this case shouldn't happen when controller is properly programmed, it's still better to avoid dumping a kernel Oops for this. As the sequence may happen only for debugging purposes, log the error and just finish the tasklet call. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 44a4455a ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 09637752 ] According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc: https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf We should use a register-access-protocol request using the short input / output report ids. This is necessary because 27MHz HID++ receivers have a max-packetsize on their HIP++ endpoint of 8, so they cannot support long reports. Using a feature-access-protocol request (which is always long or very-long) with these will cause a timeout error, followed by the hidpp driver treating the device as not being HID++ capable. This commit fixes this by switching to using a rap request to get the protocol version. Besides being tested with a (046d:c517) 27MHz receiver with various 27MHz keyboards and mice, this has also been tested to not cause regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver (046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 29da93fe ] Randy reported objtool triggered on his (GCC-7.4) build: lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled This is due to UBSAN generating signed-overflow-UB warnings where it should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel uses through -fno-strict-overflow). Make the functions use 'unsigned long' throughout. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: luto@kernel.org Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.orgSigned-off-by:
-
Jiri Kosina authored
[ Upstream commit a65c88e1 ] In-NMI warnings have been added to vmalloc_fault() via: ebc8827f ("x86: Barf when vmalloc and kmemcheck faults happen in NMI") back in the time when our NMI entry code could not cope with nested NMIs. These days, it's perfectly fine to take a fault in NMI context and we don't have to care about the fact that IRET from the fault handler might cause NMI nesting. This warning has already been removed from 32-bit implementation of vmalloc_fault() in: 6863ea0c ("x86/mm: Remove in_nmi() warning from vmalloc_fault()") but the 64-bit version was omitted. Remove the bogus warning also from 64-bit implementation of vmalloc_fault(). Reported-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit d4645d30 ] The test robot reported a wrong assignment of a per-CPU variable which it detected by using sparse and sent a report. The assignment itself is correct. The annotation for sparse was wrong and hence the report. The first pointer is a "normal" pointer and points to the per-CPU memory area. That means that the __percpu annotation has to be moved. Move the __percpu annotation to pointer which points to the per-CPU area. This change affects only the sparse tool (and is ignored by the compiler). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f97f8f06 ("smpboot: Provide infrastructure for percpu hotplug threads") Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.deSigned-off-by:
-
Kees Cook authored
[ Upstream commit 392bef70 ] When building x86 with Clang LTO and CFI, CFI jump regions are automatically added to the end of the .text section late in linking. As a result, the _etext position was being labelled before the appended jump regions, causing confusion about where the boundaries of the executable region actually are in the running kernel, and broke at least the fault injection code. This moves the _etext mark to outside (and immediately after) the .text area, as it already the case on other architectures (e.g. arm64, arm). Reported-and-tested-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190423183827.GA4012@beastSigned-off-by:
-
Arnd Bergmann authored
[ Upstream commit 78d4eb8a ] clang has identified a code path in which it thinks a variable may be unused: drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] fifo_pop(&ca->free_inc, bucket); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^~ drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here allocator_wait(ca, bch_allocator_push(ca, bucket)); ^~~~~~ drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait' if (cond) \ ^~~~ drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true fifo_pop(&ca->free_inc, bucket); ^ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^ drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^ drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning long bucket; ^ This cannot happen in practice because we only enter the loop if there is at least one element in the list. Slightly rearranging the code makes this clearer to both the reader and the compiler, which avoids the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Coly Li authored
[ Upstream commit ce3e4cfb ] Currently run_cache_set() has no return value, if there is failure in bch_journal_replay(), the caller of run_cache_set() has no idea about such failure and just continue to execute following code after run_cache_set(). The internal failure is triggered inside bch_journal_replay() and being handled in async way. This behavior is inefficient, while failure handling inside bch_journal_replay(), cache register code is still running to start the cache set. Registering and unregistering code running as same time may introduce some rare race condition, and make the code to be more hard to be understood. This patch adds return value to run_cache_set(), and returns -EIO if bch_journal_rreplay() fails. Then caller of run_cache_set() may detect such failure and stop registering code flow immedidately inside register_cache_set(). If journal replay fails, run_cache_set() can report error immediately to register_cache_set(). This patch makes the failure handling for bch_journal_replay() be in synchronized way, easier to understand and debug, and avoid poetential race condition for register-and-unregister in same time. Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 63120731 ] journal replay failed with messages: Sep 10 19:10:43 ceph kernel: bcache: error on bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries 2057493-2057567 missing! (replaying 2057493-20766016), disabling caching The reason is in journal_reclaim(), when discard is enabled, we send discard command and reclaim those journal buckets whose seq is old than the last_seq_now, but before we write a journal with last_seq_now, the machine is restarted, so the journal with the last_seq_now is not written to the journal bucket, and the last_seq_wrote in the newest journal is old than last_seq_now which we expect to be, so when we doing replay, journals from last_seq_wrote to last_seq_now are missing. It's hard to write a journal immediately after journal_reclaim(), and it harmless if those missed journal are caused by discarding since those journals are already wrote to btree node. So, if miss seqs are started from the beginning journal, we treat it as normal, and only print a message to show the miss journal, and point out it maybe caused by discarding. Patch v2 add a judgement condition to ignore the missed journal only when discard enabled as Coly suggested. (Coly Li: rebase the patch with other changes in bch_journal_replay()) Signed-off-by:
Tang Junhui <tang.junhui.linux@gmail.com> Tested-by:
Dennis Schridde <devurandom@gmx.net> Signed-off-by:
-
Coly Li authored
[ Upstream commit 68d10e69 ] When failure happens inside bch_journal_replay(), calling cache_set_err_on() and handling the failure in async way is not a good idea. Because after bch_journal_replay() returns, registering code will continue to execute following steps, and unregistering code triggered by cache_set_err_on() is running in same time. First it is unnecessary to handle failure and unregister cache set in an async way, second there might be potential race condition to run register and unregister code for same cache set. So in this patch, if failure happens in bch_journal_replay(), we don't call cache_set_err_on(), and just print out the same error message to kernel message buffer, then return -EIO immediately caller. Then caller can detect such failure and handle it in synchrnozied way. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit f8739155 ] When nbytes < 4, end is wronlgy set to a negative value which, due to uint, is then interpreted to a large value leading to a deadlock in the following code. This patch fix this problem. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 0ed2a005 ] In case create_singlethread_workqueue fails, the fix free the hardware and returns NULL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit b4c35c17 ] The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e055 ("mwifiex: add rx histogram statistics support") Signed-off-by:
-
Daniel Baluta authored
[ Upstream commit ddb35114 ] is_slave_mode defaults to false because sai structure that contains it is kzalloc'ed. Anyhow, if we decide to set the following configuration SAI slave -> SAI master, is_slave_mode will remain set on true although SAI being master it should be set to false. Fix this by updating is_slave_mode for each call of fsl_sai_set_dai_fmt. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sergey Matyukevich authored
[ Upstream commit 5dc8cdce ] FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sugar Zhang authored
[ Upstream commit 2da254cc ] This patch kill instructs the DMAC to immediately terminate execution of a thread. and then clear the interrupt status, at last, stop generating interrupts for DMA_SEV. to guarantee the next dma start is clean. otherwise, one interrupt maybe leave to next start and make some mistake. we can reporduce the problem as follows: DMASEV: modify the event-interrupt resource, and if the INTEN sets function as interrupt, the DMAC will set irq<event_num> HIGH to generate interrupt. write INTCLR to clear interrupt. DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | mask INTEN | | | DMAKILL | | | spin_unlock_irqrestore in above case, a interrupt was left, and if we unmask INTEN, the DMAC will set irq<event_num> HIGH to generate interrupt. to fix this, do as follows: DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | DMAKILL | | | clear INTCLR | mask INTEN | | | spin_unlock_irqrestore Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
-
Mariusz Bialonczyk authored
[ Upstream commit 62909da8 ] >From the DS2408 datasheet [1]: "Resume Command function checks the status of the RC flag and, if it is set, directly transfers control to the control functions, similar to a Skip ROM command. The only way to set the RC flag is through successfully executing the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM command" The function currently works perfectly fine in a multidrop bus, but when we have only a single slave connected, then only a Skip ROM is used and Match ROM is not called at all. This is leading to problems e.g. with single one DS2408 connected, as the Resume Command is not working properly and the device is responding with failing results after the Resume Command. This commit is fixing this by using a Skip ROM instead in those cases. The bandwidth / performance advantage is exactly the same. Refs: [1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdfSigned-off-by:
Mariusz Bialonczyk <manio@skyboo.net> Reviewed-by:
Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit f22b1ba1 ] The device's remove() attempts to shut down the delayed_work scheduled on the kernel-global workqueue by calling flush_scheduled_work(). Unfortunately, flush_scheduled_work() does not prevent the delayed_work from re-scheduling itself. The delayed_work might run after the device has been removed, and touch the already de-allocated info structure. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync() during remove(): this ensures that the delayed work is properly cancelled, is no longer running, and is not able to re-schedule itself. This issue was detected with the help of Coccinelle. Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 30f24eab ] If for some reason the device gives us an RX interrupt before we're ready for it, perhaps during device power-on with misconfigured IRQ causes mapping or so, we can crash trying to access the queues. Prevent that by checking that we actually have RXQs and that they were properly allocated. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 24afabdb ] Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit 9a4f26cc ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Signed-off-by:
Tobin C. Harding <tobin@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tobin C. Harding <tobin@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.orgSigned-off-by:
-
