add new interface for vcn powrergating and vcn dpm as well.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

enable vcn powergating in driver for navi10

v2: set vcn pg bit according to AMD_PG_SUPPORT_VCN flag
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For sw control power gating, it needs notify SMU to power up/down VCN
when enter/exit working state.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1). use PREEMPT_QUEUE instead of RESET_QUEUE for gfx ring disablement.
2). Need wait for unmapping queue done before continue execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch sets dpm_enabled flag but don't enable vcn dpm, because vcn dpm
doesn't work so far and we needs to enable the sysfs interfaces.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.15.0
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'adev->in_suspend' code path is missing in gfx_v10_0_gfx_init_queue()
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

temporarily disable to avoid s3 test failure.

s3 test failure log:
"[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout,
signaled seq=8278, emitted seq=8281"
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add new registers: mmCGTT_SPI_CLK_CTRL, mmDB_DEBUG3 and
mmGL2C_CGTT_SCLK_CTRL.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This dpm_enabled flag will be recognized as the VCN DPM enabled as well. In fact
VCN/DCN DPM on Navi10 is not good so far, so we cannot enable it for now.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to fix the incorrect type of pptable, otherwise, the data will be
totally wrong in parsing phase.
Signed-off-by: Kenneth Feng <Kenneth.Feng@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This header is actually for each asic, so we should not include in smu_v11_0.c.
And rename the one for navi10.

v2: add hack for XGMI (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Getting MAX_FAN_RPM value needs to be read by pptable, so it should be moved to
asic level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces new smu power source type, it's to handle the different
AC/DC source defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch moves the rest of Watermarks_t uses into asic level. It's to avoid
the conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch moves the rest of SmuMetrics_t uses into asic level. It's to avoid the
conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch moves the rest of PPTable_t uses into asic level. It's to avoid the
conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch uses the table size member in the structure instead of getting
directly, because the table is different in each asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Table id may be different for each asic, so it's good to use this as the input
for common interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Nothing was using it.  Just replace with smu_update_table
which is what everything was using via a wrapper anyway.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The smc tables defines should be in the asic level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

TABLE_COUNT should be inited in asic level. Because the value may be different
on each asic even on the same ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces new smu table type, it's to handle the different smu table
defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces new smu feature type, it's to handle the different feature
mask defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces new smu clk type, it's to handle the different ppclk
defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Navi10 will use sw smu driver for dynamic power managment,
while vega20 could also use sw smu driver when amdgpu_dpm is
set to 2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enabale DCEFCLK dpm on navi10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

seperate the Vega20 case from navi10 for gfxoff so that gfxoff
won't be allowed on Vega20
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. check the firmware version when enabling gfxoff
2. overwrite the pptable to make sure gfxoff is really
enabled on navi10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add the gfxoff interface to navi10,it's disabled by default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add smu feature mask:
1.FEATURE_DPM_PREFETCHER_BIT
2.FEATURE_DPM_PREFETCHER_BIT
3.FEATURE_ATHUB_PG
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1.change function return value type: from "unallowed" to "allowed"
2.replace feature mask number with feature macro, the code will clear.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

remove duplicate code (un-used) in smu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1.add smc_firmware_header_v2_1 hfirmware support, support more pptable in smc firmware.
2.optimization current pptable load framework.
3.rename read_pptable_from_vbios with setup_pptable.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add smu11 fw version check for navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the function os is_dpm_running is aisc related function,
so move them to asic file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The read_sensor functions has asic related parts code,
so move them to asic file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The callback of get[set]_power_profile is asic related function,
so move theme into vega20_ppt file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the function of conv_profile_to_workload is asic related function,
so move them into vega20_ppt file
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>