- 19 Sep, 2018 31 commits
-
-
Surabhi Vishnoi authored
[ Upstream commit 673bc519 ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by:
Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 4dc98c19 ] tw_probe() returns 0 in case of fail of tw_initialize_device_extension(), pci_resource_start() or tw_reset_sequence() and releases resources. twl_probe() returns 0 in case of fail of twl_initialize_device_extension(), pci_iomap() and twl_reset_sequence(). twa_probe() returns 0 in case of fail of tw_initialize_device_extension(), ioremap() and twa_reset_sequence(). The patch adds retval initialization for these cases. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Srinivas Pandruvada authored
[ Upstream commit 2dbb3ec2 ] We have seen that on some platforms, SATA device never show any DEVSLP residency. This prevent power gating of SATA IP, which prevent system to transition to low power mode in systems with SLP_S0 aka modern standby systems. The PHY logic is off only in DEVSLP not in slumber. Reference: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets /332995-skylake-i-o-platform-datasheet-volume-1.pdf Section 28.7.6.1 Here driver is trying to do read-modify-write the devslp register. But not resetting the bits for which this driver will modify values (DITO, MDAT and DETO). So simply reset those bits before updating to new values. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 0494d7ff ] isa_virt_to_bus() & isa_bus_to_virt() claim to treat ISA bus addresses as being identical to physical addresses, but they fail to do so in the presence of a non-zero PHYS_OFFSET. Correct this by having them use virt_to_phys() & phys_to_virt(), which consolidates the calculations to one place & ensures that ISA bus addresses do indeed match physical addresses. Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20047/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 3f259111 ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8b ("ath10k: introduce DFS implementation") Signed-off-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 576d5290 ] Add missing in_8() accessors to init_pmu() and pmu_sr_intr(). This fixes several sparse warnings: drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Olga Kornievskaia authored
[ Upstream commit 32cd3ee5 ] If there is an error during processing of a callback message, it leads to refrence leak on the client structure and eventually an unclean superblock. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 21b8732e ] After update of kernel, the perf tool doesn't run anymore on my 32MB RAM powerpc board, but still runs on a 128MB RAM board: ~# strace perf execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory) --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- +++ killed by SIGSEGV +++ Segmentation fault objdump -x shows that .bss section has a huge size of 24Mbytes: 27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3 With especially the following objects having quite big size: 10205f80 l O .bss 00140000 runtime_cycles_stats 10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats 10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats 105c5f80 l O .bss 00140000 runtime_branches_stats 10705f80 l O .bss 00140000 runtime_cacherefs_stats 10845f80 l O .bss 00140000 runtime_l1_dcache_stats 10985f80 l O .bss 00140000 runtime_l1_icache_stats 10ac5f80 l O .bss 00140000 runtime_ll_cache_stats 10c05f80 l O .bss 00140000 runtime_itlb_cache_stats 10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats 10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats 10fc5f80 l O .bss 00140000 runtime_transaction_stats 11105f80 l O .bss 00140000 runtime_elision_stats 11245f80 l O .bss 00140000 runtime_topdown_total_slots 11385f80 l O .bss 00140000 runtime_topdown_slots_retired 114c5f80 l O .bss 00140000 runtime_topdown_slots_issued 11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles 11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles This is due to commit 4d255766 ("perf: Bump max number of cpus to 1024"), because many tables are sized with MAX_NR_CPUS This patch gives the opportunity to redefine MAX_NR_CPUS via $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1 Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.frSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Yunlong Song authored
[ Upstream commit 3611ce99 ] For the case when sbi->segs_per_sec > 1, take section:segment = 5 for example, if segment 1 is just used and allocate new segment 2, and the blocks of segment 1 is invalidated, at this time, the previous code will use __set_test_and_free to free the free_secmap and free_sections++, this is not correct since it is still a current section, so fix it. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 0419056e ] If number of isa and pci boards exceed NUM_BOARDS on the path rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs in register_PCI() on assign rcktpt_io_addr[i]. The patch adds check on upper bound for index of registered board in register_PCI. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit f019f07e ] The uio_unregister_device() function assumes that if "info->uio_dev" is non-NULL that means "info" is fully allocated. Setting info->uio_de has to be the last thing in the function. In the current code, if request_threaded_irq() fails then we return with info->uio_dev set to non-NULL but info is not fully allocated and it can lead to double frees. Fixes: beafc54c ("UIO: Add the User IO core code") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 81ae962d ] Free resources instead of direct return of the error code if kim_probe fails. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
BingJing Chang authored
[ Upstream commit d63e2fc8 ] During raid5 replacement, the stripes can be marked with R5_NeedReplace flag. Data can be read from being-replaced devices and written to replacing spares without reading all other devices. (It's 'replace' mode. s.replacing = 1) If a being-replaced device is dropped, the replacement progress will be interrupted and resumed with pure recovery mode. However, existing stripes before being interrupted cannot read from the dropped device anymore. It prints lots of WARN_ON messages. And it results in data corruption because existing stripes write problematic data into its replacement device and update the progress. \# Erase disks (1MB + 2GB) dd if=/dev/zero of=/dev/sda bs=1MB count=2049 dd if=/dev/zero of=/dev/sdb bs=1MB count=2049 dd if=/dev/zero of=/dev/sdc bs=1MB count=2049 dd if=/dev/zero of=/dev/sdd bs=1MB count=2049 mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152 \# Ensure array stores non-zero data dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB \# Start replacement mdadm /dev/md0 -a /dev/sdd mdadm /dev/md0 --replace /dev/sda Then, Hot-plug out /dev/sda during recovery, and wait for recovery done. echo check > /sys/block/md0/md/sync_action cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0. Soon after you hot-plug out /dev/sda, you will see many WARN_ON messages. The replacement recovery will be interrupted shortly. After the recovery finishes, it will result in data corruption. Actually, it's just an unhandled case of replacement. In commit <f94c0b66> (md/raid5: fix interaction of 'replace' and 'recovery'.), if a NeedReplace device is not UPTODATE then that is an error, the commit just simply print WARN_ON but also mark these corrupted stripes with R5_WantReplace. (it means it's ready for writes.) To fix this case, we can leverage 'sync and replace' mode mentioned in commit <9a3e1101> (md/raid5: detect and handle replacements during recovery.). We can add logics to detect and use 'sync and replace' mode for these stripes. Reported-by:
Alex Chen <alexchen@synology.com> Reviewed-by:
Alex Wu <alexwu@synology.com> Reviewed-by:
Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by:
BingJing Chang <bingjingc@synology.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Mike Christie authored
[ Upstream commit 6a64f6e1 ] When __transport_register_session is called from transport_register_session irqs will already have been disabled, so we do not want the unlock irq call to enable them until the higher level has done the final spin_unlock_irqrestore/ spin_unlock_irq. This has __transport_register_session use the save/restore call. Signed-off-by:
Mike Christie <mchristi@redhat.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 40b25bce ] There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hedberg authored
[ Upstream commit 6c3711ec ] This driver was recently updated to use serdev, so add the appropriate dependency. Without this one can get compiler warnings like this if CONFIG_SERIAL_DEV_BUS is not enabled: CC [M] drivers/bluetooth/hci_h5.o drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable] static struct serdev_device_driver h5_serdev_driver = { ^~~~~~~~~~~~~~~~ Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit d89d4155 ] Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by:
Blair Prescott <blair.prescott@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a39284ae ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by:
-
Alexey Brodkin authored
commit c83532fb upstream. SWAP support on ARC was fixed earlier by commit 6e376114 ("ARC: Fix CONFIG_SWAP") so now we may safely enable it on platforms that have external media like USB and SD-card. Note: it was already allowed for HSDK Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org # 6e376114: ARC: Fix CONFIG_SWAP Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Prateek Sood authored
commit 50972fe7 upstream. Fix ordering of link creation between node->prev and prev->next in osq_lock(). A case in which the status of optimistic spin queue is CPU6->CPU2 in which CPU6 has acquired the lock. tail v ,-. <- ,-. |6| |2| `-' -> `-' At this point if CPU0 comes in to acquire osq_lock, it will update the tail count. CPU2 CPU0 ---------------------------------- tail v ,-. <- ,-. ,-. |6| |2| |0| `-' -> `-' `-' After tail count update if CPU2 starts to unqueue itself from optimistic spin queue, it will find an updated tail count with CPU0 and update CPU2 node->next to NULL in osq_wait_next(). unqueue-A tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-B ->tail != curr && !node->next If reordering of following stores happen then prev->next where prev being CPU2 would be updated to point to CPU0 node: tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' -> `-' osq_wait_next() node->next <- 0 xchg(node->next, NULL) tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-C At this point if next instruction WRITE_ONCE(next->prev, prev); in CPU2 path is committed before the update of CPU0 node->prev = prev then CPU0 node->prev will point to CPU6 node. tail v----------. v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' `----------^ At this point if CPU0 path's node->prev = prev is committed resulting in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL currently, tail v ,-. <- ,-. <- ,-. |6| |2| |0| `-' `-' `-' `----------^ so if CPU0 gets into unqueue path of osq_lock it will keep spinning in infinite loop as condition prev->next == node will never be true. Signed-off-by:
Prateek Sood <prsood@codeaurora.org> [ Added pictures, rewrote comments. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: sramana@codeaurora.org Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Michal Hocko authored
commit 476accbe upstream. There is a strange __GFP_NOMEMALLOC usage pattern in SELinux, specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much sense. GFP_ATOMIC on its own allows to access memory reserves while __GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this with the much more sane GFP_NOWAIT in the AVC code as we can tolerate memory allocation failures in that code. Signed-off-by:
Michal Hocko <mhocko@kernel.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Prateek Sood authored
commit 9c29c318 upstream. If a spinner is present, there is a chance that the load of rwsem_has_spinner() in rwsem_wake() can be reordered with respect to decrement of rwsem count in __up_write() leading to wakeup being missed: spinning writer up_write caller --------------- ----------------------- [S] osq_unlock() [L] osq spin_lock(wait_lock) sem->count=0xFFFFFFFF00000001 +0xFFFFFFFF00000000 count=sem->count MB sem->count=0xFFFFFFFE00000001 -0xFFFFFFFF00000001 spin_trylock(wait_lock) return rwsem_try_write_lock(count) spin_unlock(wait_lock) schedule() Reordering of atomic_long_sub_return_release() in __up_write() and rwsem_has_spinner() in rwsem_wake() can cause missing of wakeup in up_write() context. In spinning writer, sem->count and local variable count is 0XFFFFFFFE00000001. It would result in rwsem_try_write_lock() failing to acquire rwsem and spinning writer going to sleep in rwsem_down_write_failed(). The smp_rmb() will make sure that the spinner state is consulted after sem->count is updated in up_write context. Signed-off-by:
-
Tejun Heo authored
commit e00f4f4d upstream. blkcg allocates some per-cgroup data structures with GFP_NOWAIT and when that fails falls back to operations which aren't specific to the cgroup. Occassional failures are expected under pressure and falling back to non-cgroup operation is the right thing to do. Unfortunately, I forgot to add __GFP_NOWARN to these allocations and these expected failures end up creating a lot of noise. Add __GFP_NOWARN. Signed-off-by:
Marc MERLIN <marc@merlins.org> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Daniel Micay authored
commit 88a5b39b upstream. Noticed by FORTIFY_SOURCE, this swaps memcpy() for strncpy() to zero-value fill the end of the buffer instead of over-reading a string from .rodata. Signed-off-by:
Daniel Micay <danielmicay@gmail.com> [kees: wrote commit log] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wayne Porter <wporter82@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
commit 498c4b4e upstream. The driver may sleep under a spin lock, and the function call path is: rtsx_exclusive_enter_ss (acquire the lock by spin_lock) rtsx_enter_ss rtsx_power_off_card xd_cleanup_work xd_delay_write xd_finish_write xd_copy_page wait_timeout schedule_timeout --> may sleep To fix it, "wait_timeout" is replaced with mdelay in xd_copy_page. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Vegard Nossum authored
commit b0f5a8f3 upstream. This fixes a regression in commit 4d6501dc where I didn't notice that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to NULL after our initialisation in copy_process(). We can simply get rid of the arch-specific initialisation here since it is now always done in copy_process() before hitting copy_thread{,_tls}(). Review notes: - As far as I can tell, copy_process() is the only user of copy_thread_tls(), which is the only caller of copy_thread() for architectures that don't implement copy_thread_tls(). - After this patch, there is no arch-specific code touching p->set_child_tid or p->clear_child_tid whatsoever. - It may look like MIPS/OpenRISC wanted to always have these fields be NULL, but that's not true, as copy_process() would unconditionally set them again _after_ calling copy_thread_tls() before commit 4d6501dc. Fixes: 4d6501dc ("kthread: Fix use-after-free if kthread fork fails") Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only Acked-by:
Stafford Horne <shorne@gmail.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Jamie Iles <jamie.iles@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vegard Nossum authored
commit 4d6501dc upstream. If a kthread forks (e.g. usermodehelper since commit 1da5c46f) but fails in copy_process() between calling dup_task_struct() and setting p->set_child_tid, then the value of p->set_child_tid will be inherited from the parent and get prematurely freed by free_kthread_struct(). kthread() - worker_thread() - process_one_work() | - call_usermodehelper_exec_work() | - kernel_thread() | - _do_fork() | - copy_process() | - dup_task_struct() | - arch_dup_task_struct() | - tsk->set_child_tid = current->set_child_tid // implied | - ... | - goto bad_fork_* | - ... | - free_task(tsk) | - free_kthread_struct(tsk) | - kfree(tsk->set_child_tid) - ... - schedule() - __schedule() - wq_worker_sleeping() - kthread_data(task)->flags // UAF The problem started showing up with commit 1da5c46f since it reused ->set_child_tid for the kthread worker data. A better long-term solution might be to get rid of the ->set_child_tid abuse. The comment in set_kthread_struct() also looks slightly wrong. Debugged-by:
Jamie Iles <jamie.iles@oracle.com> Fixes: 1da5c46f ("kthread: Make struct kthread kmalloc'ed") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ritesh Harjani authored
commit b3193bc0 upstream. In below scenario blkio cgroup does not work as per their assigned weights :- 1. When the underlying device is nonrotational with a single HW queue with depth of >= CFQ_HW_QUEUE_MIN 2. When the use case is forming two blkio cgroups cg1(weight 1000) & cg2(wight 100) and two processes(file1 and file2) doing sync IO in their respective blkio cgroups. For above usecase result of fio (without this patch):- file1: (groupid=0, jobs=1): err= 0: pid=685: Thu Jan 1 19:41:49 1970 write: IOPS=1315, BW=41.1MiB/s (43.1MB/s)(1024MiB/24906msec) <...> file2: (groupid=0, jobs=1): err= 0: pid=686: Thu Jan 1 19:41:49 1970 write: IOPS=1295, BW=40.5MiB/s (42.5MB/s)(1024MiB/25293msec) <...> // both the process BW is equal even though they belong to diff. cgroups with weight of 1000(cg1) and 100(cg2) In above case (for non rotational NCQ devices), as soon as the request from cg1 is completed and even though it is provided with higher set_slice=10, because of CFQ algorithm when the driver tries to fetch the request, CFQ expires this group without providing any idle time nor weight priority and schedules another cfq group (in this case cg2). And thus both cfq groups(cg1 & cg2) keep alternating to get the disk time and hence loses the cgroup weight based scheduling. Below patch gives a chance to cfq algorithm (cfq_arm_slice_timer) to arm the slice timer in case group_idle is enabled. In case if group_idle is also not required (including for nonrotational NCQ drives), we need to explicitly set group_idle = 0 from sysfs for such cases. With this patch result of fio(for above usecase) :- file1: (groupid=0, jobs=1): err= 0: pid=690: Thu Jan 1 00:06:08 1970 write: IOPS=1706, BW=53.3MiB/s (55.9MB/s)(1024MiB/19197msec) <..> file2: (groupid=0, jobs=1): err= 0: pid=691: Thu Jan 1 00:06:08 1970 write: IOPS=1043, BW=32.6MiB/s (34.2MB/s)(1024MiB/31401msec) <..> // In this processes BW is as per their respective cgroups weight. Signed-off-by:
Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Takashi Iwai authored
commit 16037643 upstream. On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly. As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work. This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: <stable@vger.kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Felipe Balbi authored
commit 851a1511 upstream. DNV's iTCO is slightly different with SMBCTRL sitting at a different offset when compared to all other devices. Let's fix so that we can properly use iTCO watchdog. Fixes: 84d7f2eb ("i2c: i801: Add support for Intel DNV") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shubhrajyoti Datta authored
commit ae7304c3 upstream. Disable interrupts while configuring the transfer and enable them back. We have below as the programming sequence 1. start and slave address 2. byte count and stop In some customer platform there was a lot of interrupts between 1 and 2 and after slave address (around 7 clock cyles) if 2 is not executed then the transaction is nacked. To fix this case make the 2 writes atomic. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> [wsa: added a newline for better readability] Signed-off-by:
-
- 15 Sep, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Ethan Lien authored
commit d814a491 upstream. We use customized, nodesize batch value to update dirty_metadata_bytes. We should also use batch version of compare function or we will easily goto fast path and get false result from percpu_counter_compare(). Fixes: e2d84521 ("Btrfs: use percpu counter for dirty metadata count") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Ethan Lien <ethanlien@synology.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> nb: Rebased on 4.4.y ] Signed-off-by:
-
Gustavo A. R. Silva authored
commit ad0eaee6 upstream. Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org [Gustavo: Backported to 3.16..4.18 - Remove code comment removal] Signed-off-by:
-
Martin Schwidefsky authored
commit 5eda25b1 upstream. The memove, memset, memcpy, __memset16, __memset32 and __memset64 function have an additional indirect return branch in form of a "bzr" instruction. These need to use expolines as well. Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 97489e06 ("s390/lib: use expoline for indirect branches") Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Tomas Winkler authored
commit cc365dcf upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: <stable@vger.kernel.org> v4.13+ Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit c2d6511e upstream. sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy callbacks but it may fail before the timer is initialized due to missing options (either not supplied by user-space or set as a default qdisc), also q->qdisc is used by ->reset and ->destroy so we need it initialized. Reproduce: $ sysctl net.core.default_qdisc=tbf $ ip l set ethX up Crash log: [ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 959.160323] IP: qdisc_reset+0xa/0x5c [ 959.160400] PGD 59cdb067 [ 959.160401] P4D 59cdb067 [ 959.160466] PUD 59ccb067 [ 959.160532] PMD 0 [ 959.160597] [ 959.160706] Oops: 0000 [#1] SMP [ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem [ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62 [ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000 [ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c [ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286 [ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000 [ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000 [ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff [ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0 [ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001 [ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0 [ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 959.163638] Call Trace: [ 959.163788] tbf_reset+0x19/0x64 [sch_tbf] [ 959.163957] qdisc_destroy+0x8b/0xe5 [ 959.164119] qdisc_create_dflt+0x86/0x94 [ 959.164284] ? dev_activate+0x129/0x129 [ 959.164449] attach_one_default_qdisc+0x36/0x63 [ 959.164623] netdev_for_each_tx_queue+0x3d/0x48 [ 959.164795] dev_activate+0x4b/0x129 [ 959.164957] __dev_open+0xe7/0x104 [ 959.165118] __dev_change_flags+0xc6/0x15c [ 959.165287] dev_change_flags+0x25/0x59 [ 959.165451] do_setlink+0x30c/0xb3f [ 959.165613] ? check_chain_key+0xb0/0xfd [ 959.165782] rtnl_newlink+0x3a4/0x729 [ 959.165947] ? rtnl_newlink+0x117/0x729 [ 959.166121] ? ns_capable_common+0xd/0xb1 [ 959.166288] ? ns_capable+0x13/0x15 [ 959.166450] rtnetlink_rcv_msg+0x188/0x197 [ 959.166617] ? rcu_read_unlock+0x3e/0x5f [ 959.166783] ? rtnl_newlink+0x729/0x729 [ 959.166948] netlink_rcv_skb+0x6c/0xce [ 959.167113] rtnetlink_rcv+0x23/0x2a [ 959.167273] netlink_unicast+0x103/0x181 [ 959.167439] netlink_sendmsg+0x326/0x337 [ 959.167607] sock_sendmsg_nosec+0x14/0x3f [ 959.167772] sock_sendmsg+0x29/0x2e [ 959.167932] ___sys_sendmsg+0x209/0x28b [ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8 [ 959.168267] ? _raw_spin_unlock+0x27/0x31 [ 959.168432] ? __handle_mm_fault+0x651/0xdb1 [ 959.168602] ? check_chain_key+0xb0/0xfd [ 959.168773] __sys_sendmsg+0x45/0x63 [ 959.168934] ? __sys_sendmsg+0x45/0x63 [ 959.169100] SyS_sendmsg+0x19/0x1b [ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 959.169432] RIP: 0033:0x7fcc5097e690 [ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690 [ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003 [ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003 [ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006 [ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000 [ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf [ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24 98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb [ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610 [ 959.171821] CR2: 0000000000000018 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 634576a1 upstream. netem can fail in ->init due to missing options (either not supplied by user-space or used as a default qdisc) causing a timer->base null pointer deref in its ->destroy() and ->reset() callbacks. Reproduce: $ sysctl net.core.default_qdisc=netem $ ip l set ethX up Crash log: [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1814.847181] IP: hrtimer_active+0x17/0x8a [ 1814.847270] PGD 59c34067 [ 1814.847271] P4D 59c34067 [ 1814.847337] PUD 37374067 [ 1814.847403] PMD 0 [ 1814.847468] [ 1814.847582] Oops: 0000 [#1] SMP [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O) [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62 [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000 [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246 [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000 [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8 [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000 [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001 [ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0 [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1814.850723] Call Trace: [ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93 [ 1814.851047] hrtimer_cancel+0x15/0x20 [ 1814.851211] qdisc_watchdog_cancel+0x12/0x14 [ 1814.851383] netem_reset+0xe6/0xed [sch_netem] [ 1814.851561] qdisc_destroy+0x8b/0xe5 [ 1814.851723] qdisc_create_dflt+0x86/0x94 [ 1814.851890] ? dev_activate+0x129/0x129 [ 1814.852057] attach_one_default_qdisc+0x36/0x63 [ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48 [ 1814.852406] dev_activate+0x4b/0x129 [ 1814.852569] __dev_open+0xe7/0x104 [ 1814.852730] __dev_change_flags+0xc6/0x15c [ 1814.852899] dev_change_flags+0x25/0x59 [ 1814.853064] do_setlink+0x30c/0xb3f [ 1814.853228] ? check_chain_key+0xb0/0xfd [ 1814.853396] ? check_chain_key+0xb0/0xfd [ 1814.853565] rtnl_newlink+0x3a4/0x729 [ 1814.853728] ? rtnl_newlink+0x117/0x729 [ 1814.853905] ? ns_capable_common+0xd/0xb1 [ 1814.854072] ? ns_capable+0x13/0x15 [ 1814.854234] rtnetlink_rcv_msg+0x188/0x197 [ 1814.854404] ? rcu_read_unlock+0x3e/0x5f [ 1814.854572] ? rtnl_newlink+0x729/0x729 [ 1814.854737] netlink_rcv_skb+0x6c/0xce [ 1814.854902] rtnetlink_rcv+0x23/0x2a [ 1814.855064] netlink_unicast+0x103/0x181 [ 1814.855230] netlink_sendmsg+0x326/0x337 [ 1814.855398] sock_sendmsg_nosec+0x14/0x3f [ 1814.855584] sock_sendmsg+0x29/0x2e [ 1814.855747] ___sys_sendmsg+0x209/0x28b [ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8 [ 1814.856082] ? _raw_spin_unlock+0x27/0x31 [ 1814.856251] ? __handle_mm_fault+0x651/0xdb1 [ 1814.856421] ? check_chain_key+0xb0/0xfd [ 1814.856592] __sys_sendmsg+0x45/0x63 [ 1814.856755] ? __sys_sendmsg+0x45/0x63 [ 1814.856923] SyS_sendmsg+0x19/0x1b [ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 1814.857256] RIP: 0033:0x7f733b2dd690 [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690 [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003 [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003 [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002 [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000 [ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3 31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b 45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89 [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590 [ 1814.860214] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
-
Nikolay Aleksandrov authored
commit 32db864d upstream. If sch_hhf fails in its ->init() function (either due to wrong user-space arguments as below or memory alloc failure of hh_flows) it will do a null pointer deref of q->hh_flows in its ->destroy() function. To reproduce the crash: $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000 Crash log: [ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null) [ 690.655565] IP: hhf_destroy+0x48/0xbc [ 690.655944] PGD 37345067 [ 690.655948] P4D 37345067 [ 690.656252] PUD 58402067 [ 690.656554] PMD 0 [ 690.656857] [ 690.657362] Oops: 0000 [#1] SMP [ 690.657696] Modules linked in: [ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57 [ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000 [ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc [ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246 [ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 [ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0 [ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000 [ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea [ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000 [ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0 [ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 690.671003] Call Trace: [ 690.671743] qdisc_create+0x377/0x3fd [ 690.672534] tc_modify_qdisc+0x4d2/0x4fd [ 690.673324] rtnetlink_rcv_msg+0x188/0x197 [ 690.674204] ? rcu_read_unlock+0x3e/0x5f [ 690.675091] ? rtnl_newlink+0x729/0x729 [ 690.675877] netlink_rcv_skb+0x6c/0xce [ 690.676648] rtnetlink_rcv+0x23/0x2a [ 690.677405] netlink_unicast+0x103/0x181 [ 690.678179] netlink_sendmsg+0x326/0x337 [ 690.678958] sock_sendmsg_nosec+0x14/0x3f [ 690.679743] sock_sendmsg+0x29/0x2e [ 690.680506] ___sys_sendmsg+0x209/0x28b [ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1 [ 690.681915] ? check_chain_key+0xb0/0xfd [ 690.682449] __sys_sendmsg+0x45/0x63 [ 690.682954] ? __sys_sendmsg+0x45/0x63 [ 690.683471] SyS_sendmsg+0x19/0x1b [ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 690.684516] RIP: 0033:0x7f8ae529d690 [ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690 [ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003 [ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000 [ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002 [ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000 [ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf [ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83 c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02 00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1 [ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0 [ 690.690636] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by:
-
Nikolay Aleksandrov authored
commit e89d469e upstream. The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501 ("multiq: Further multiqueue cleanup") Signed-off-by:
-
