When the headset is connected, there is no automatic switching of the
capture source - you can only manually select the headset microphone
in pavucontrol.

This patch fixes/activates the inactive microphone of the headset.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add HDMI codec ID for Intel Panther Lake platform.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240830072458.110831-1-yung-chuan.liao@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.

This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Move the initialization of parent->mutex into
hda_component_manager_init() so that it is always valid.

In hda_component_manager_bind() do not clear the parent information.
Only zero-fill the per-component data ready for it to be filled in
by the components as they bind.

Previously parent->mutex was being initialized only in
hda_component_manager_bind(). This meant that it was only
initialized if all components appeared and there was a bind callback.
If there wasn't a bind the mutex object was not valid when the
Realtek driver called any of the other functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 047b9cbb ("ALSA: hda: hda_component: Protect shared data with a mutex")
Link: https://patch.msgid.link/20240826094940.45563-1-rf@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the HP Pavilion Aero 13 (13-bg0xxx) (year 2024) to list of
quirks for keyboard LED mute indication.

The laptop has two LEDs (one for speaker and one for mic mute). The
pre-existing quirk ALC245_FIXUP_HP_X360_MUTE_LEDS chains both the quirk for
mic and speaker mute.

Tested on 6.11.0-rc4 with the aforementioned laptop.
Signed-off-by: Hendrik Borghorst <hendrikborghorst@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825174351.5687-1-hendrikborghorst@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.11-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.11

A relatively large collection of fixes here, all driver specific and
none of them particularly major, plus one MAINTAINERS update.  There's
been a bunch of work on module autoloading from several people.

If the timestamp of a calibration entry is 0 it is an unused entry and
must be ignored.

Some end-products reserve EFI space for calibration entries by shipping
with a zero-filled EFI file. When searching the file for calibration
data the driver must skip the empty entries. The timestamp of a valid
entry is always non-zero.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1cad8725 ("ASoC: cs-amp-lib: Add helpers for factory calibration data")
Link: https://patch.msgid.link/20240822133544.304421-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

For a normal calibration blob the calTarget values must be non-zero and
unique, and the calTime values must be non-zero. Don't rely on
get_random_bytes() to be random enough to guarantee this. Force the
calTarget and calTime values to be valid while retaining randomness
in the values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 17786231 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The HDA driver cannot assume that the order that the devices are
specified in the cirrus,dev-index matches the order of calibration
entries.

Only a calibration entry with a matching silicon id will be used.

Fixes: cfa43aaa ("ALSA: hda: cs35l56: Apply amp calibration from EFI data")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240821124711.44325-1-simont@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.

Fixes: 46397622 ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runboxSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver fixes for regressions from 6.11-rc1 due to the
  driver core change making a structure in a driver core callback const.

  These were missed by all testing EXCEPT for what Bart happened to be
  running, so I appreciate the fixes provided here for some
  odd/not-often-used driver subsystems that nothing else happened to
  catch.

  Both of these fixes have been in linux-next all week with no reported
  issues"

* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mips: sgi-ip22: Fix the build
  ARM: riscpc: ecard: Fix the build

Pull char / misc fixes from Greg KH:
 "Here are some small char/misc fixes for 6.11-rc4 to resolve reported
  problems. Included in here are:

   - fastrpc revert of a change that broke userspace

   - xillybus fixes for reported issues

  Half of these have been in linux-next this week with no reported
  problems, I don't know if the last bit of xillybus driver changes made
  it in, but they are 'obviously correct' so will be safe :)"

* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  char: xillybus: Check USB endpoints when probing device
  char: xillybus: Refine workqueue handling
  Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
  char: xillybus: Don't destroy workqueue from work item running on it

Pull tty / serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.11-rc4 to
  resolve some reported problems. Included in here are:

   - conmakehash.c userspace build issues

   - fsl_lpuart driver fix

   - 8250_omap revert for reported regression

   - atmel_serial rts flag fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
  tty: atmel_serial: use the correct RTS flag.
  tty: vt: conmakehash: remove non-portable code printing comment header
  tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
  resolve some reported issues. Included in here are:

   - thunderbolt driver fixes for reported problems

   - typec driver fixes

   - xhci fixes

   - new device id for ljca usb driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
  usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
  Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
  usb: typec: ucsi: Fix the return value of ucsi_run_command()
  usb: xhci: fix duplicate stall handling in handle_tx_event()
  usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
  thunderbolt: Mark XDomain as unplugged when router is removed
  thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()

Pull more btrfs fixes from David Sterba:
 "A more fixes. We got reports that shrinker added in 6.10 still causes
  latency spikes and the fixes don't handle all corner cases. Due to
  summer holidays we're taking a shortcut to disable it for release
  builds and will fix it in the near future.

   - only enable extent map shrinker for DEBUG builds, temporary quick
     fix to avoid latency spikes for regular builds

   - update target inode's ctime on unlink, mandated by POSIX

   - properly take lock to read/update block group's zoned variables

   - add counted_by() annotations"

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: only enable extent map shrinker for DEBUG builds
  btrfs: zoned: properly take lock to read/update block group's zoned variables
  btrfs: tree-checker: add dev extent item checks
  btrfs: update target inode's ctime on unlink
  btrfs: send: annotate struct name_cache_entry with __counted_by()

fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).

So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.

The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().

This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).

Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f25 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes. All except one are for MM. 10 of these are cc:stable and
  the others pertain to post-6.10 issues.

  As usual with these merges, singletons and doubletons all over the
  place, no identifiable-by-me theme. Please see the lovingly curated
  changelogs to get the skinny"

* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/migrate: fix deadlock in migrate_pages_batch() on large folios
  alloc_tag: mark pages reserved during CMA activation as not tagged
  alloc_tag: introduce clear_page_tag_ref() helper function
  crash: fix riscv64 crash memory reserve dead loop
  selftests: memfd_secret: don't build memfd_secret test on unsupported arches
  mm: fix endless reclaim on machines with unaccepted memory
  selftests/mm: compaction_test: fix off by one in check_compaction()
  mm/numa: no task_numa_fault() call if PMD is changed
  mm/numa: no task_numa_fault() call if PTE is changed
  mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
  mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
  mm: don't account memmap per-node
  mm: add system wide stats items category
  mm: don't account memmap on failure
  mm/hugetlb: fix hugetlb vs. core-mm PT locking
  mseal: fix is_madv_discard()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes on 85xx with some configs since the recent hugepd rework.

 - Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
   platforms.

 - Don't enable offline cores when changing SMT modes, to match existing
   userspace behaviour.

Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.

* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/topology: Check if a core is online
  cpu/SMT: Enable SMT only if a core is online
  powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
  powerpc/mm: Fix size of allocated PGDIR
  soc: fsl: qbman: remove unused struct 'cgr_comp'

Pull smb client fixes from Steve French:

 - fix for clang warning - additional null check

 - fix for cached write with posix locks

 - flexible structure fix

* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: smb2pdu.h: Use static_assert() to check struct sizes
  smb3: fix lock breakage for cached writes
  smb/client: avoid possible NULL dereference in cifs_free_subrequest()

Pull i2c fixes from Wolfram Sang:
 "I2C core fix replacing IS_ENABLED() with IS_REACHABLE()

  For host drivers, there are two fixes:

   - Tegra I2C Controller: Addresses a potential double-locking issue
     during probe. ACPI devices are not IRQ-safe when invoking runtime
     suspend and resume functions, so the irq_safe flag should not be
     set.

   - Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
     of the runtime_resume() function, which was missed in the previous
     release"

* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Do not mark ACPI devices as irq safe
  i2c: Use IS_REACHABLE() for substituting empty ACPI functions
  i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Pull SCSI fixes from James Bottomley:
 "Two small fixes to the mpi3mr driver. One to avoid oversize
  allocations in tracing and the other to fix an uninitialized spinlock
  in the user to driver feature request code (used to trigger dumps and
  the like)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
  scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock

Pull xfs fixes from Chandan Babu:

 - Check for presence of only 'attr' feature before scrubbing an inode's
   attribute fork.

 - Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
   long (i.e. 50ms) sleep durations to prevent high load averages.

 - Do not allow users to change the realtime flag of a file unless the
   datadev and rtdev both support fsdax access modes.

* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
  xfs: revert AIL TASK_KILLABLE threshold
  xfs: attr forks require attr, not attr2

Pull bcachefs fixes from Kent OverstreetL

 - New on disk format version, bcachefs_metadata_version_disk_accounting_inum

   This adds one more disk accounting counter, which counts disk usage
   and number of extents per inode number. This lets us track
   fragmentation, for implementing defragmentation later, and it also
   counts disk usage per inode in all snapshots, which will be a useful
   thing to expose to users.

 - One performance issue we've observed is threads spinning when they
   should be waiting for dirty keys in the key cache to be flushed by
   journal reclaim, so we now have hysteresis for the waiting thread, as
   well as improving the tracepoint and a new time_stat, for tracking
   time blocked waiting on key cache flushing.

... and various assorted smaller fixes.

* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
  bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
  bcachefs: fix incorrect i_state usage
  bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
  bcachefs: Fix forgetting to pass trans to fsck_err()
  bcachefs: Increase size of cuckoo hash table on too many rehashes
  bcachefs: bcachefs_metadata_version_disk_accounting_inum
  bcachefs: Kill __bch2_accounting_mem_mod()
  bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
  bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
  bcachefs: Add a time_stat for blocked on key cache flush
  bcachefs: Improve trans_blocked_journal_reclaim tracepoint
  bcachefs: Add hysteresis to waiting on btree key cache flush
  lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
  bcachefs: Convert for_each_btree_node() to lockrestart_do()
  bcachefs: Add missing downgrade table entry
  bcachefs: disk accounting: ignore unknown types
  bcachefs: bch2_accounting_invalid() fixup
  bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
  bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()

We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull memcg-v1 fix from Al Viro:
 "memcg_write_event_control() oops fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  memcg_write_event_control(): fix a user-triggerable oops

Pull arm64 fixes from Catalin Marinas:

 - Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
   macro instead of the *_ERR() one in order to avoid writing -EFAULT to
   the value register in case of a fault

 - Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
   Prior to this fix, only the first element was initialised

 - Move the KASAN random tag seed initialisation after the per-CPU areas
   have been initialised (prng_state is __percpu)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix KASAN random tag seed initialization
  arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  arm64: uaccess: correct thinko in __get_mem_asm()

Pull clk fix from Stephen Boyd:
 "One fix for the new T-Head TH1520 clk driver that marks a bus clk
  critical so that it isn't turned off during late init which breaks
  emmc-sdio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: thead: fix dependency on clk_ignore_unused

Pull block fixes from Jens Axboe:

 - Fix corruption issues with s390/dasd (Eric, Stefan)

 - Fix a misuse of non irq locking grab of a lock (Li)

 - MD pull request with a single data corruption fix for raid1 (Yu)

* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
  block: Fix lockdep warning in blk_mq_mark_tag_wait
  md/raid1: Fix data corruption for degraded array with slow disk
  s390/dasd: fix error recovery leading to data corruption on ESE devices
  s390/dasd: Remove DMA alignment

Pull io_uring fixes from Jens Axboe:

 - Fix a comment in the uapi header using the wrong member name (Caleb)

 - Fix KCSAN warning for a debug check in sqpoll (me)

 - Two more NAPI tweaks (Olivier)

* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
  io_uring: fix user_data field name in comment
  io_uring/sqpoll: annotate debug task == current with data_race()
  io_uring/napi: remove duplicate io_napi_entry timeout assignation
  io_uring/napi: check napi_enabled in io_napi_add() before proceeding