- 02 Oct, 2018 40 commits
-
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 This brings arch/x86/include/asm/pgtable.h in sync with upstream stable (4.4.155 in this case because 4.4.148 still seems to miss some fixup). Effectively this replaces the open coded version of pud_mkhuge() we were using by one using pud_set_flags()- And also adds pud_set/clear_flags(). I did not make the change in pfn_pud: - phys_addr_t pfn = (phys_addr_t)page_nr << PAGE_SHIFT; + phys_addr_t pfn = page_nr << PAGE_SHIFT; Maybe the conversion is not necessary but it should not hurt either. The remaining changes are only whitespace/linebreak ones. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 Adjusts formatting (no code change) to match current upstream stable 4.4.148. Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit eee4818b upstream _PAGE_PSE is used to distinguish between a truly non-present (_PAGE_PRESENT=0) PMD, and a PMD which is undergoing a THP split and should be treated as present. But _PAGE_SWP_SOFT_DIRTY currently uses the _PAGE_PSE bit, which would cause confusion between one of those PMDs undergoing a THP split, and a soft-dirty PMD. Dropping _PAGE_PSE check in pmd_present() does not work well, because it can hurt optimization of tlb handling in thp split. Thus, we need to move the bit. In the current kernel, bits 1-4 are not used in non-present format since commit 00839ee3 ("x86/mm: Move swap offset/type up in PTE to work around erratum"). So let's move _PAGE_SWP_SOFT_DIRTY to bit 1. Bit 7 is used as reserved (always clear), so please don't use it for other purpose. [dwmw2: Pulled in to 4.9 backport to support L1TF changes] Link: http://lkml.kernel.org/r/20170717193955.20207-3-zi.yan@sent.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Zi Yan <zi.yan@cs.rutgers.edu> Acked-by:
Dave Hansen <dave.hansen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 The delta was only in comments or blank lines. So this brings the file (arch/x86/include/asm/pgtable_64.h) into sync with 4.4.148. Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 208cbb32 upstream. It was reported that the commit d0a8d937 is causing users of gcc < 4.9 to observe -Werror=missing-prototypes errors. Indeed, it seems that: extern inline unsigned long native_save_fl(void) { return 0; } compiled with -Werror=missing-prototypes produces this warning in gcc < 4.9, but not gcc >= 4.9. Fixes: d0a8d937 ("x86/paravirt: Make native_save_fl() extern inline"). Reported-by:
David Laight <david.laight@aculab.com> Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: hpa@zytor.com Cc: jgross@suse.com Cc: kstewart@linuxfoundation.org Cc: gregkh@linuxfoundation.org Cc: boris.ostrovsky@oracle.com Cc: astrachan@google.com Cc: mka@chromium.org Cc: arnd@arndb.de Cc: tstellar@redhat.com Cc: sedat.dilek@gmail.com Cc: David.Laight@aculab.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180803170550.164688-1-ndesaulniers@google.comSigned-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 0ea06330 upstream. Remove all %p uses in error messages in kprobes/x86. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: David S . Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tobin C . Harding <me@tobin.cc> Cc: Will Deacon <will.deacon@arm.com> Cc: acme@kernel.org Cc: akpm@linux-foundation.org Cc: brueckner@linux.vnet.ibm.com Cc: linux-arch@vger.kernel.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/152491902310.9916.13355297638917767319.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oleksij Rempel authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1bcfe056 upstream. Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Fixes: b1d17f68 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Michael Mera authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 062d0f22 upstream. In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is written at index 'count-1' where 'count' is the size of the write, so potentially 0. This patch filters odd values for the write size/position to avoid this type of problem. Signed-off-by:
Michael Mera <dev@michaelmera.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit d8f9cc32 upstream. To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 08bb558a upstream. Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 119e1ef8 upstream. __legitimize_mnt() has two problems - one is that in case of success the check of mount_lock is not ordered wrt preceding increment of refcount, making it possible to have successful __legitimize_mnt() on one CPU just before the otherwise final mntpu() on another, with __legitimize_mnt() not seeing mntput() taking the lock and mntput() not seeing the increment done by __legitimize_mnt(). Solved by a pair of barriers. Another is that failure of __legitimize_mnt() on the second read_seqretry() leaves us with reference that'll need to be dropped by caller; however, if that races with final mntput() we can end up with caller dropping rcu_read_lock() and doing mntput() to release that reference - with the first mntput() having freed the damn thing just as rcu_read_lock() had been dropped. Solution: in "do mntput() yourself" failure case grab mount_lock, check if MNT_DOOMED has been set by racing final mntput() that has missed our increment and if it has - undo the increment and treat that as "failure, caller doesn't need to drop anything" case. It's not easy to hit - the final mntput() has to come right after the first read_seqretry() in __legitimize_mnt() *and* manage to miss the increment done by __legitimize_mnt() before the second read_seqretry() in there. The things that are almost impossible to hit on bare hardware are not impossible on SMP KVM, though... Reported-by:
Oleg Nesterov <oleg@redhat.com> Fixes: 48a066e7 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 9ea0a46c upstream. mntput_no_expire() does the calculation of total refcount under mount_lock; unfortunately, the decrement (as well as all increments) are done outside of it, leading to false positives in the "are we dropping the last reference" test. Consider the following situation: * mnt is a lazy-umounted mount, kept alive by two opened files. One of those files gets closed. Total refcount of mnt is 2. On CPU 42 mntput(mnt) (called from __fput()) drops one reference, decrementing component * After it has looked at component #0, the process on CPU 0 does mntget(), incrementing component #0, gets preempted and gets to run again - on CPU 69. There it does mntput(), which drops the reference (component #69) and proceeds to spin on mount_lock. * On CPU 42 our first mntput() finishes counting. It observes the decrement of component #69, but not the increment of component #0. As the result, the total it gets is not 1 as it should've been - it's 0. At which point we decide that vfsmount needs to be killed and proceed to free it and shut the filesystem down. However, there's still another opened file on that filesystem, with reference to (now freed) vfsmount, etc. and we are screwed. It's not a wide race, but it can be reproduced with artificial slowdown of the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups. Fix consists of moving the refcount decrement under mount_lock; the tricky part is that we want (and can) keep the fast case (i.e. mount that still has non-NULL ->mnt_ns) entirely out of mount_lock. All places that zero mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu() before that mntput(). IOW, if mntput() observes (under rcu_read_lock()) a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to be dropped. Reported-by:
Jann Horn <jannh@google.com> Tested-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 90bad5e0 upstream. Since mountpoint crossing can happen without leaving lazy mode, root dentries do need the same protection against having their memory freed without RCU delay as everything else in the tree. It's partially hidden by RCU delay between detaching from the mount tree and dropping the vfsmount reference, but the starting point of pathwalk can be on an already detached mount, in which case umount-caused RCU delay has already passed by the time the lazy pathwalk grabs rcu_read_lock(). If the starting point happens to be at the root of that vfsmount *and* that vfsmount covers the entire filesystem, we get trouble. Fixes: 48a066e7 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1214fd7b upstream. Surround scsi_execute() calls with scsi_autopm_get_device() and scsi_autopm_put_device(). Note: removing sr_mutex protection from the scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of sr_mutex is to serialize cdrom_*() calls. This patch avoids that complaints similar to the following appear in the kernel log if runtime power management is enabled: INFO: task systemd-udevd:650 blocked for more than 120 seconds. Not tainted 4.18.0-rc7-dbg+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. systemd-udevd D28176 650 513 0x00000104 Call Trace: __schedule+0x444/0xfe0 schedule+0x4e/0xe0 schedule_preempt_disabled+0x18/0x30 __mutex_lock+0x41c/0xc70 mutex_lock_nested+0x1b/0x20 __blkdev_get+0x106/0x970 blkdev_get+0x22c/0x5a0 blkdev_open+0xe9/0x100 do_dentry_open.isra.19+0x33e/0x570 vfs_open+0x7c/0xd0 path_openat+0x6e3/0x1120 do_filp_open+0x11c/0x1c0 do_sys_open+0x208/0x2d0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Maurizio Lombardi <mlombard@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit fdcb613d upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c74817 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit d472b3a6 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
John David Anglin authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit fedb8da9 upstream. For years I thought all parisc machines executed loads and stores in order. However, Jeff Law recently indicated on gcc-patches that this is not correct. There are various degrees of out-of-order execution all the way back to the PA7xxx processor series (hit-under-miss). The PA8xxx series has full out-of-order execution for both integer operations, and loads and stores. This is described in the following article: http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml For this reason, we need to define mb() and to insert a memory barrier before the store unlocking spinlocks. This ensures that all memory accesses are complete prior to unlocking. The ldcw instruction performs the same function on entry. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 66509a27 upstream. Enable the -mlong-calls compiler option by default, because otherwise in most cases linking the vmlinux binary fails due to truncations of R_PARISC_PCREL22F relocations. This fixes building the 64-bit defconfig. Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit e01e8063 upstream. One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Srinidhi Rao <srinidhir@vmware.com> Signed-off-by:
-
Thomas Egerer authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 32b6170c upstream. The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2Signed-off-by:
Thomas Egerer <hakke_007@gmx.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tadeusz Struk authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 50122847 upstream. Commit 8844618d: "ext4: only look at the bg_flags field if it is valid" will complain if block group zero does not have the EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, since a freshly created file system has this flag cleared. It gets almost immediately after the file system is mounted read-write --- but the following somewhat unlikely sequence will end up triggering a false positive report of a corrupted file system: mkfs.ext4 /dev/vdc mount -o ro /dev/vdc /vdc mount -o remount,rw /dev/vdc Instead, when initializing the inode table for block group zero, test to make sure that itable_unused count is not too large, since that is the case that will result in some or all of the reserved inodes getting cleared. This fixes the failures reported by Eric Whiteney when running generic/230 and generic/231 in the the nojournal test case. Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid") Reported-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792109Signed-off-by:
-
Esben Haabendal authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit 9f9e3e0d upstream. Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by:
Esben Haabendal <eha@deif.com> Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit 73c8d894 upstream. Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Cc: stable@vger.kernel.org Fixes: debdd57f ("tracing: Make a snapshot feature available from userspace") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit a0040c01 upstream. Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit 91874ecf upstream. It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b237 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1792109 [ Upstream commit 61f4b237 ] On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d42 ("netlink: Do not subscribe to non-existent groups"). Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1792109 [ Upstream commit 7acf9d42 ] Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Anna-Maria Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit 80d20d35 upstream. local_timer_softirq_pending() checks whether the timer softirq is pending with: local_softirq_pending() & TIMER_SOFTIRQ. This is wrong because TIMER_SOFTIRQ is the softirq number and not a bitmask. So the test checks for the wrong bit. Use BIT(TIMER_SOFTIRQ) instead. Fixes: 5d62c183 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()") Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Cc: bigeasy@linutronix.de Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit d1f0301b upstream. The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8 ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by:
Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by:
-
Anil Gurumurthy authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit b4146c49 upstream. Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: <stable@vger.kernel.org> Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Quinn Tran authored
BugLink: https://bugs.launchpad.net/bugs/1792109 commit b08abbd9 upstream. During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1791953Signed-off-by:
-
Tony Battersby authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit c170e5a8 upstream. Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acb ("sg: O_EXCL and other lock handling") Cc: <stable@vger.kernel.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
-
Herbert Xu authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 46d8c4b2 upstream. This was detected by the self-test thanks to Ard's chunking patch. I finally got around to testing this out on my ancient Via box. It turns out that the workaround got the assembly wrong and we end up doing count + initial cycles of the loop instead of just count. This obviously causes corruption, either by overwriting the source that is yet to be processed, or writing over the end of the buffer. On CPUs that don't require the workaround only ECB is affected. On Nano CPUs both ECB and CBC are affected. This patch fixes it by doing the subtraction prior to the assembly. Fixes: a76c1c23 ("crypto: padlock-aes - work around Nano CPU...") Cc: <stable@vger.kernel.org> Reported-by:
Jamie Heilman <jamie@audible.transient.net> Signed-off-by:
-
Roman Kagan authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 63aff655 upstream. VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested vmx is turned on with the module parameter. However, it's only freed if the L1 guest has executed VMXON which is not a given. As a result, on a system with nested==on every creation+deletion of an L1 vcpu without running an L2 guest results in leaking one vpid. Since the total number of vpids is limited to 64k, they can eventually get exhausted, preventing L2 from starting. Delay allocation of the L2 vpid until VMXON emulation, thus matching its freeing. Fixes: 5c614b35 Cc: stable@vger.kernel.org Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiang Biao authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 89da619b upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e2250429 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Huang Chong <huang.chong@zte.com.cn> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jeremy Cline authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit c8e8cd57 upstream. 'call' is a user-controlled value, so sanitize the array index after the bounds check to avoid speculating past the bounds of the 'nargs' array. Found with the help of Smatch: net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue 'nargs' [r] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 72c05f32 upstream. ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
