1. 20 Nov, 2019 10 commits
    • Eli Cohen's avatar
      net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6 · a86db226
      Eli Cohen authored
      Be sure to release the neighbour in case of failures after successful
      route lookup.
      
      Fixes: 101f4de9 ("net/mlx5e: Move TC tunnel offloading code to separate source file")
      Signed-off-by: default avatarEli Cohen <eli@mellanox.com>
      Reviewed-by: default avatarRoi Dayan <roid@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      a86db226
    • Geert Uytterhoeven's avatar
      mdio_bus: Fix init if CONFIG_RESET_CONTROLLER=n · 6e4ff1c9
      Geert Uytterhoeven authored
      Commit 1d463956 ("mdio_bus: Fix PTR_ERR applied after initialization
      to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS,
      causing failures if reset controller support is not enabled.  E.g. on
      r7s72100/rskrza1:
      
          sh-eth e8203000.ethernet: MDIO init failed: -524
          sh-eth: probe of e8203000.ethernet failed with error -524
      
      Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb.
      
      Fixes: 1d463956 ("mdio_bus: Fix PTR_ERR applied after initialization to constant")
      Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      Cc: YueHaibing <yuehaibing@huawei.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e4ff1c9
    • David S. Miller's avatar
      Revert "mdio_bus: fix mdio_register_device when RESET_CONTROLLER is disabled" · 2c61e821
      David S. Miller authored
      This reverts commit 075e238d.
      
      Going to go with Geert's fix instead, which also has a
      correct Fixes tag.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2c61e821
    • Huazhong Tan's avatar
      net: hns3: fix a wrong reset interrupt status mask · 74e78d6b
      Huazhong Tan authored
      According to hardware user manual, bits5~7 in register
      HCLGE_MISC_VECTOR_INT_STS means reset interrupts status,
      but HCLGE_RESET_INT_M is defined as bits0~2 now. So it
      will make hclge_reset_err_handle() read the wrong reset
      interrupt status.
      
      This patch fixes this wrong bit mask.
      
      Fixes: 2336f19d ("net: hns3: check reset interrupt status when reset fails")
      Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      74e78d6b
    • Chuhong Yuan's avatar
      net: fec: fix clock count mis-match · a31eda65
      Chuhong Yuan authored
      pm_runtime_put_autosuspend in probe will call runtime suspend to
      disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM
      is not defined, its implementation will be empty, then runtime
      suspend will not be called.)
      
      Therefore, we can call pm_runtime_get_sync to runtime resume it
      first to enable clks, which matches the runtime suspend. (Only when
      CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be
      empty, then runtime resume will not be called.)
      
      Then it is fine to disable clks without causing clock count mis-match.
      
      Fixes: c43eab3e ("net: fec: add missed clk_disable_unprepare in remove")
      Signed-off-by: default avatarChuhong Yuan <hslester96@gmail.com>
      Acked-by: default avatarFugang Duan <fugang.duan@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a31eda65
    • Davide Caratti's avatar
      net/sched: act_pedit: fix WARN() in the traffic path · f67169fe
      Davide Caratti authored
      when configuring act_pedit rules, the number of keys is validated only on
      addition of a new entry. This is not sufficient to avoid hitting a WARN()
      in the traffic path: for example, it is possible to replace a valid entry
      with a new one having 0 extended keys, thus causing splats in dmesg like:
      
       pedit BUG: index 42
       WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit]
       [...]
       RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit]
       Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9
       RSP: 0018:ffff888077c9f320 EFLAGS: 00010286
       RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2
       RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec
       RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209
       R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780
       R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000
       FS:  00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000
       CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
       CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0
       Call Trace:
        tcf_action_exec+0x105/0x3f0
        tcf_classify+0xf2/0x410
        __dev_queue_xmit+0xcbf/0x2ae0
        ip_finish_output2+0x711/0x1fb0
        ip_output+0x1bf/0x4b0
        ip_send_skb+0x37/0xa0
        raw_sendmsg+0x180c/0x2430
        sock_sendmsg+0xdb/0x110
        __sys_sendto+0x257/0x2b0
        __x64_sys_sendto+0xdd/0x1b0
        do_syscall_64+0xa5/0x4e0
        entry_SYSCALL_64_after_hwframe+0x49/0xbe
       RIP: 0033:0x7fdeeb72e993
       Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
       RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
       RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993
       RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003
       RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010
       R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
       R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080
      
      Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that
      attempts to install rules having 0 keys are always rejected with -EINVAL.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f67169fe
    • Russell King's avatar
      net: phylink: fix link mode modification in PHY mode · d9922c0e
      Russell King authored
      Modifying the link settings via phylink_ethtool_ksettings_set() and
      phylink_ethtool_set_pauseparam() didn't always work as intended for
      PHY based setups, as calling phylink_mac_config() would result in the
      unresolved configuration being committed to the MAC, rather than the
      configuration with the speed and duplex setting.
      
      This would work fine if the update caused the link to renegotiate,
      but if no settings have changed, phylib won't trigger a renegotiation
      cycle, and the MAC will be left incorrectly configured.
      
      Avoid calling phylink_mac_config() unless we are using an inband mode
      in phylink_ethtool_ksettings_set(), and use phy_set_asym_pause() as
      introduced in 4.20 to set the PHY settings in
      phylink_ethtool_set_pauseparam().
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9922c0e
    • Russell King's avatar
      net: phylink: update documentation on create and destroy · 269a6b5f
      Russell King authored
      Update the documentation on phylink's create and destroy functions to
      explicitly state that the rtnl lock must not be held while calling
      these.
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      269a6b5f
    • Corinna Vinschen's avatar
      r8169: disable TSO on a single version of RTL8168c to fix performance · a0783cd0
      Corinna Vinschen authored
      During performance testing, I found that one of my r8169 NICs suffered
      a major performance loss, a 8168c model.
      
      Running netperf's TCP_STREAM test didn't return the expected
      throughput of > 900 Mb/s, but rather only about 22 Mb/s.  Strange
      enough, running the TCP_MAERTS and UDP_STREAM tests all returned with
      throughput > 900 Mb/s, as did TCP_STREAM with the other r8169 NICs I can
      test (either one of 8169s, 8168e, 8168f).
      
      Bisecting turned up commit 93681cd7,
      "r8169: enable HW csum and TSO" as the culprit.
      
      I added my 8168c version, RTL_GIGA_MAC_VER_22, to the code
      special-casing the 8168evl as per the patch below.  This fixed the
      performance problem for me.
      
      Fixes: 93681cd7 ("r8169: enable HW csum and TSO")
      Signed-off-by: default avatarCorinna Vinschen <vinschen@redhat.com>
      Reviewed-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0783cd0
    • Zhu Yanjun's avatar
      MAINTAINERS: forcedeth: Change Zhu Yanjun's email address · c9d55b62
      Zhu Yanjun authored
      I prefer to use my personal email address for kernel related work.
      Signed-off-by: default avatarZhu Yanjun <yanjun.zhu@oracle.com>
      Acked-by: default avatarRain River <rain.1986.08.12@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9d55b62
  2. 19 Nov, 2019 10 commits
  3. 17 Nov, 2019 6 commits
  4. 16 Nov, 2019 14 commits
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 5ffaf037
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "Misc fixes: a handful of AUX event handling related fixes, a Sparse
        fix and two ABI fixes"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf/core: Fix missing static inline on perf_cgroup_switch()
        perf/core: Consistently fail fork on allocation failures
        perf/aux: Disallow aux_output for kernel events
        perf/core: Reattach a misplaced comment
        perf/aux: Fix the aux_output group inheritance fix
        perf/core: Disallow uncore-cgroup events
      5ffaf037
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 8be636dd
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix memory leak in xfrm_state code, from Steffen Klassert.
      
       2) Fix races between devlink reload operations and device
          setup/cleanup, from Jiri Pirko.
      
       3) Null deref in NFC code, from Stephan Gerhold.
      
       4) Refcount fixes in SMC, from Ursula Braun.
      
       5) Memory leak in slcan open error paths, from Jouni Hogander.
      
       6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
      
       7) Info leak on short USB request answers in ax88172a driver, from
          Oliver Neukum.
      
       8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
      
       9) PTP config timestamp flags validation, from Richard Cochran.
      
      10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
      
      11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
        ipmr: Fix skb headroom in ipmr_get_route().
        net: hns3: cleanup of stray struct hns3_link_mode_mapping
        net/smc: fix fastopen for non-blocking connect()
        rds: ib: update WR sizes when bringing up connection
        net: gemini: add missed free_netdev
        net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
        seg6: fix skb transport_header after decap_and_validate()
        seg6: fix srh pointer in get_srh()
        net: stmmac: Use the correct style for SPDX License Identifier
        octeontx2-af: Use the correct style for SPDX License Identifier
        ptp: Extend the test program to check the external time stamp flags.
        mlx5: Reject requests to enable time stamping on both edges.
        igb: Reject requests that fail to enable time stamping on both edges.
        dp83640: Reject requests to enable time stamping on both edges.
        mv88e6xxx: Reject requests to enable time stamping on both edges.
        ptp: Introduce strict checking of external time stamp options.
        renesas: reject unsupported external timestamp flags
        mlx5: reject unsupported external timestamp flags
        igb: reject unsupported external timestamp flags
        dp83640: reject unsupported external timestamp flags
        ...
      8be636dd
    • Guillaume Nault's avatar
      ipmr: Fix skb headroom in ipmr_get_route(). · 7901cd97
      Guillaume Nault authored
      In route.c, inet_rtm_getroute_build_skb() creates an skb with no
      headroom. This skb is then used by inet_rtm_getroute() which may pass
      it to rt_fill_info() and, from there, to ipmr_get_route(). The later
      might try to reuse this skb by cloning it and prepending an IPv4
      header. But since the original skb has no headroom, skb_push() triggers
      skb_under_panic():
      
      skbuff: skb_under_panic: text:00000000ca46ad8a len:80 put:20 head:00000000cd28494e data:000000009366fd6b tail:0x3c end:0xec0 dev:veth0
      ------------[ cut here ]------------
      kernel BUG at net/core/skbuff.c:108!
      invalid opcode: 0000 [#1] SMP KASAN PTI
      CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
      RIP: 0010:skb_panic+0xbf/0xd0
      Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
      RSP: 0018:ffff888059ddf0b0 EFLAGS: 00010286
      RAX: 0000000000000086 RBX: ffff888060a315c0 RCX: ffffffff8abe4822
      RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88806c9a79cc
      RBP: ffff888059ddf118 R08: ffffed100d9361b1 R09: ffffed100d9361b0
      R10: ffff88805c68aee3 R11: ffffed100d9361b1 R12: ffff88805d218000
      R13: ffff88805c689fec R14: 000000000000003c R15: 0000000000000ec0
      FS:  00007f6af184b700(0000) GS:ffff88806c980000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00007ffc8204a000 CR3: 0000000057b40006 CR4: 0000000000360ee0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       skb_push+0x7e/0x80
       ipmr_get_route+0x459/0x6fa
       rt_fill_info+0x692/0x9f0
       inet_rtm_getroute+0xd26/0xf20
       rtnetlink_rcv_msg+0x45d/0x630
       netlink_rcv_skb+0x1a5/0x220
       rtnetlink_rcv+0x15/0x20
       netlink_unicast+0x305/0x3a0
       netlink_sendmsg+0x575/0x730
       sock_sendmsg+0xb5/0xc0
       ___sys_sendmsg+0x497/0x4f0
       __sys_sendmsg+0xcb/0x150
       __x64_sys_sendmsg+0x48/0x50
       do_syscall_64+0xd2/0xac0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Actually the original skb used to have enough headroom, but the
      reserve_skb() call was lost with the introduction of
      inet_rtm_getroute_build_skb() by commit 404eb77e ("ipv4: support
      sport, dport and ip_proto in RTM_GETROUTE").
      
      We could reserve some headroom again in inet_rtm_getroute_build_skb(),
      but this function shouldn't be responsible for handling the special
      case of ipmr_get_route(). Let's handle that directly in
      ipmr_get_route() by calling skb_realloc_headroom() instead of
      skb_clone().
      
      Fixes: 404eb77e ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
      Signed-off-by: default avatarGuillaume Nault <gnault@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7901cd97
    • Salil Mehta's avatar
      net: hns3: cleanup of stray struct hns3_link_mode_mapping · b696083d
      Salil Mehta authored
      This patch cleans-up the stray left over code. It has no
      functionality impact.
      Signed-off-by: default avatarSalil Mehta <salil.mehta@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b696083d
    • Ursula Braun's avatar
      net/smc: fix fastopen for non-blocking connect() · 8204df72
      Ursula Braun authored
      FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to
      TCP native during connection start, the FASTOPEN setsockopts trigger
      this fallback, if the SMC-socket is still in state SMC_INIT.
      But if a FASTOPEN setsockopt is called after a non-blocking connect(),
      this is broken, and fallback does not make sense.
      This change complements
      commit cd206360 ("net/smc: avoid fallback in case of non-blocking connect")
      and fixes the syzbot reported problem "WARNING in smc_unhash_sk".
      
      Reported-by: syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com
      Fixes: e1bbdd57 ("net/smc: reduce sock_put() for fallback sockets")
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.ibm.com>
      Signed-off-by: default avatarKarsten Graul <kgraul@linux.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8204df72
    • Dag Moxnes's avatar
      rds: ib: update WR sizes when bringing up connection · a36e629e
      Dag Moxnes authored
      Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and
      rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result,
      a connection being down while rds_ib_sysctl_max_send_wr or
      rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when
      it comes back up.
      
      Move resizing of WRs to rds_ib_setup_qp so that connections will be setup
      with the most current WR sizes.
      Signed-off-by: default avatarDag Moxnes <dag.moxnes@oracle.com>
      Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a36e629e
    • Chuhong Yuan's avatar
      net: gemini: add missed free_netdev · 18d647ae
      Chuhong Yuan authored
      This driver forgets to free allocated netdev in remove like
      what is done in probe failure.
      Add the free to fix it.
      Signed-off-by: default avatarChuhong Yuan <hslester96@gmail.com>
      Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      18d647ae
    • Vladimir Oltean's avatar
      net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid · c80ed84e
      Vladimir Oltean authored
      This sequence of operations:
      ip link set dev br0 type bridge vlan_filtering 1
      bridge vlan del dev swp2 vid 1
      ip link set dev br0 type bridge vlan_filtering 1
      ip link set dev br0 type bridge vlan_filtering 0
      
      apparently fails with the message:
      
      [   31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering
      [   31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0)
      [   31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2
      [   31.335599] ------------[ cut here ]------------
      [   31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
      [   31.349981] br0: Commit of attribute (id=6) failed.
      [   31.354890] Modules linked in:
      [   31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062
      [   31.366167] Hardware name: Freescale LS1021A
      [   31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14)
      [   31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c)
      [   31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c)
      [   31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8)
      [   31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4)
      [   31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118)
      [   31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518)
      [   31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c)
      [   31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60)
      [   31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c)
      [   31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110)
      [   31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8)
      [   31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4)
      [   31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250)
      [   31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c)
      [   31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28)
      [   31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0)
      [   31.505122] 7fa0:                   00000002 b6f2e060 00000003 beabd6a4 00000000 00000000
      [   31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4
      [   31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68
      
      The reason is the implementation of br_get_pvid:
      
      static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
      {
      	if (!vg)
      		return 0;
      
      	smp_rmb();
      	return vg->pvid;
      }
      
      Since VID 0 is an invalid pvid from the bridge's point of view, let's
      add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that
      doesn't really exist.
      
      Fixes: 5f33183b ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c80ed84e
    • David S. Miller's avatar
      Merge branch 'seg6-fixes-to-Segment-Routing-in-IPv6' · e84fa0ae
      David S. Miller authored
      Andrea Mayer says:
      
      ====================
      seg6: fixes to Segment Routing in IPv6
      
      This patchset is divided in 2 patches and it introduces some fixes
      to Segment Routing in IPv6, which are:
      
      - in function get_srh() fix the srh pointer after calling
        pskb_may_pull();
      
      - fix the skb->transport_header after calling decap_and_validate()
        function;
      
      Any comments on the patchset are welcome.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e84fa0ae
    • Andrea Mayer's avatar
      seg6: fix skb transport_header after decap_and_validate() · c71644d0
      Andrea Mayer authored
      in the receive path (more precisely in ip6_rcv_core()) the
      skb->transport_header is set to skb->network_header + sizeof(*hdr). As a
      consequence, after routing operations, destination input expects to find
      skb->transport_header correctly set to the next protocol (or extension
      header) that follows the network protocol. However, decap behaviors (DX*,
      DT*) remove the outer IPv6 and SRH extension and do not set again the
      skb->transport_header pointer correctly. For this reason, the patch sets
      the skb->transport_header to the skb->network_header + sizeof(hdr) in each
      DX* and DT* behavior.
      Signed-off-by: default avatarAndrea Mayer <andrea.mayer@uniroma2.it>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c71644d0
    • Andrea Mayer's avatar
      seg6: fix srh pointer in get_srh() · 7f91ed8c
      Andrea Mayer authored
      pskb_may_pull may change pointers in header. For this reason, it is
      mandatory to reload any pointer that points into skb header.
      Signed-off-by: default avatarAndrea Mayer <andrea.mayer@uniroma2.it>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7f91ed8c
    • Nishad Kamdar's avatar
      net: stmmac: Use the correct style for SPDX License Identifier · acb9bdc1
      Nishad Kamdar authored
      This patch corrects the SPDX License Identifier style in
      header files related to STMicroelectronics based Multi-Gigabit
      Ethernet driver. For C header files Documentation/process/license-rules.rst
      mandates C-like comments (opposed to C source files where
      C++ style should be used).
      
      Changes made by using a script provided by Joe Perches here:
      https://lkml.org/lkml/2019/2/7/46.
      Suggested-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarNishad Kamdar <nishadkamdar@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      acb9bdc1
    • Nishad Kamdar's avatar
      octeontx2-af: Use the correct style for SPDX License Identifier · 26b3f3cc
      Nishad Kamdar authored
      This patch corrects the SPDX License Identifier style in
      header files related to Marvell OcteonTX2 network devices.
      It uses an expilict block comment for the SPDX License
      Identifier.
      
      Changes made by using a script provided by Joe Perches here:
      https://lkml.org/lkml/2019/2/7/46.
      Suggested-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarNishad Kamdar <nishadkamdar@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26b3f3cc
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · bec8b6e9
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton:
       "11 fixes"
      
      MM fixes and one xz decompressor fix.
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        mm/debug.c: PageAnon() is true for PageKsm() pages
        mm/debug.c: __dump_page() prints an extra line
        mm/page_io.c: do not free shared swap slots
        mm/memory_hotplug: fix try_offline_node()
        mm,thp: recheck each page before collapsing file THP
        mm: slub: really fix slab walking for init_on_free
        mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
        mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
        lib/xz: fix XZ_DYNALLOC to avoid useless memory reallocations
        mm: fix trying to reclaim unevictable lru page when calling madvise_pageout
        mm: mempolicy: fix the wrong return value and potential pages leak of mbind
      bec8b6e9