Pull sound fixes from Takashi Iwai:
 "This shouldn't be a nightmare before Christmas: just a handful small
  device-specific fixes for various ASoC and HD-audio drivers.  Most of
  them are stable fixes"

* tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2)
  ASoC: fsl_sai: fix no frame clk in master mode
  ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()
  ASoC: sgtl5000: fix VAG power up timing
  ASoC: rockchip: spdif: Set transmit data level to 16 samples
  ASoC: wm8974: set cache type for regmap
  ASoC: es8328: Fix shifts for mixer switches
  ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx
  ASoC: es8328: Fix deemphasis values

Pull i915 drm fixes from Jani Nikula:
 "Here's a batch of i915 fixes all around.  It may be slightly bigger
  than one would hope for at this stage, but they've all been through
  testing in our -next before being picked up for v4.4.  Also, I missed
  Dave's fixes pull earlier today just because I wanted an extra testing
  round on this.  So I'm fairly confident.

  Wishing you all the things it is customary to wish this time of the
  year"

* tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Correct max delay for HDMI hotplug live status checking
  drm/i915: mdelay(10) considered harmful
  drm/i915: Kill intel_crtc->cursor_bo
  drm/i915: Workaround CHV pipe C cursor fail
  drm/i915: Only spin whilst waiting on the current request
  drm/i915: Limit the busy wait on requests to 5us not 10ms!
  drm/i915: Break busywaiting for requests on pending signals
  drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
  drm/i915: Set the map-and-fenceable flag for preallocated objects
  drm/i915: Drop the broken cursor base==0 special casing

Pull drm fixes from Dave Airlie:
 "Not much happening, should have dequeued this lot earlier.

  One amdgpu, one nouveau and one exynos fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/exynos: atomic check only enabled crtc states
  drm/nouveau/bios/fan: hardcode the fan mode to linear
  drm/amdgpu: fix user fence handling

Merge tag 'asoc-fix-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.4

A collection of small driver specific fixes here, nothing that'll affect
users who don't have the devices concerned.  At least the wm8974 bug
indicates that there's not too many users of some of these devices.

Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus

Pull block layer fixes from Jens Axboe:
 "Three small fixes for 4.4 final. Specifically:

   - The segment issue fix from Junichi, where the old IO path does a
     bio limit split before potentially bouncing the pages.  We need to
     do that in the right order, to ensure that limitations are met.

   - A NVMe surprise removal IO hang fix from Keith.

   - A use-after-free in null_blk, introduced by a previous patch in
     this series.  From Mike Krinkin"

* 'for-linus' of git://git.kernel.dk/linux-block:
  null_blk: fix use-after-free error
  block: ensure to split after potentially bouncing a bio
  NVMe: IO ending fixes on surprise removal

Pull nfsd fix from Bruce Fields:
 "Just one fix for a NFSv4 callback bug introduced in 4.4"

* tag 'nfsd-4.4-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: don't hold ls_mutex across a layout recall

Pull kvm fixes from Paolo Bonzini:

 - A series of fixes to the MTRR emulation, tested in the BZ by several
   users so they should be safe this late

 - A fix for a division by zero

 - Two very simple ARM and PPC fixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Reload pit counters for all channels when restoring state
  KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
  KVM: MTRR: observe maxphyaddr from guest CPUID, not host
  KVM: MTRR: fix fixed MTRR segment look up
  KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX
  KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check
  kvm: x86: move tracepoints outside extended quiescent state
  KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR

Pull s390 fixes from Martin Schwidefsky:
 "Two late bug fixes for kernel 4.4.

  Merry Christmas"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dis: Fix handling of format specifiers
  s390/zcrypt: Fix AP queue handling if queue is full

Pull virtio fix from Michael Tsirkin:
 "This includes a single fix for virtio ccw error handling"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio/s390: handle error values in irb

Fix a pointer cast typo introduced in v4.4-rc5 especially visible for
the i386 subarchitecture where it results in a kernel crash.

[ Also removed pointless cast as per Al Viro - Linus ]

Fixes: 8090bfd2 ("um: Fix fpstate handling")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

blk_end_request_all may free request, so we need to save
request_queue pointer before blk_end_request_all call.

The problem was introduced in commit cf8ecc5a
("null_blk: guarantee device restart in all irq modes")
and causes general protection fault with slab poisoning
enabled.

Fixes: cf8ecc5a ("null_blk: guarantee device
       restart in all irq modes")
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.

Fixes: 54efd50b ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This patch fixes a lost request discovered during IO + hot removal.

The driver's pci removal deletes gendisks prior to shutting down the
controller to allow dirty data to sync. Dirty data can not be synced on
a surprise removal, though, and would potentially block indefinitely.

The driver previously had marked the queue as dying in this scenario
to prevent new requests from attempting, however it will still block
for requests that already entered the queue. This patch fixes this by
quiescing IO first, then aborting the requeued requests before deleting
disks.
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash.  This will ensure
that 0 values are converted to 65536 as per the spec.

This is CVE-2015-7513.
Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Virtual machines can be run with CPUID such that there are no MTRRs.
In that case, the firmware will never enable MTRRs and it is obviously
undesirable to run the guest entirely with UC memory.  Check out guest
CPUID, and use WB memory if MTRR do not exist.

Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU.
This is wrong, because var_mtrr_range's mask variable then is discontiguous
(like FF00FFFF000, where the first run of 0s corresponds to the bits
between host and guest maxphyaddr).  Instead always set up the masks
to be full 64-bit values---we know that the reserved bits at the top
are zero, and we can restore them when reading the MSR.  This way
var_mtrr_range gets a mask that just works.

Fixes: a13842dc
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This fixes the slow-down of VM running with pci-passthrough, since some MTRR
range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE.  Memory in the
0K-640K range was incorrectly treated as uncacheable.

Fixes: f7bfb57b
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com>
[Use correct BZ for "Fixes" annotation.  - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.

v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch

	drm/i915: mdelay(10) considered harmful

- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.]
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 61fb3980)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

I missed this myself when reviewing

commit 237ed86c
Author: Sonika Jindal <sonika.jindal@intel.com>
Date:   Tue Sep 15 09:44:20 2015 +0530

    drm/i915: Check live status before reading edid

Long sleeps like this really shouldn't waste cpu cycles spinning.

Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: "Wang, Gary C" <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449859455-32609-1-git-send-email-daniel.vetter@ffwll.chReviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 71a199ba)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.

Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.

v2: Add a note about futility of micro optimizations (Chris)

Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1264859d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.

None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.

Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.

Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.

Cc: stable@vger.kernel.org
Cc: Jason Plum <max@warheads.net>
Testcase: igt/kms_chv_cursor_fail
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92826Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450459479-16286-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit b29ec92c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.

v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.

v3: Try another colour for the seqno names.
v4: Another colour for the function names.

v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 821485dc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.

The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
 the system is too busy to waste cycles on spinning and we should sleep
instead.

__i915_spin_request was introduced in
commit 2def4ad9 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Apr 7 16:20:41 2015 +0100

     drm/i915: Optimistically spin for the request completion

v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.

v3: Raise the limit to 10us
v4: Now 5us.
Reported-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.org/lkml/2015/11/12/621Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-3-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit ca5b721e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.

In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.

Fixes regression from
commit 2def4ad9 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Apr 7 16:20:41 2015 +0100

     drm/i915: Optimistically spin for the request completion

v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 91b0c352)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb.  This mismatch causes problems later on
(e.g., for the watermark code).  Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.

v2: Add intel_pre_disable_primary() call (Maarten)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449171462-30763-2-git-send-email-matthew.d.roper@intel.com
(cherry picked from commit 200757f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit d0710abb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.

We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.

Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 663f3122)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Without this patch, internal speaker and line-out work,
but front headphone output jack stays silent on the
Mac Pro 4,1.

This code path also gets executed on the MacPro 5,1 due
to identical codec SSID, but i don't know if it has any
positive or adverse effects there or not.

(v2) Implement feedback from Takashi Iwai: Reuse
     alc889_fixup_mbp_vref and just add a new nid
     0x19 for the MacPro 4,1.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull RTC fixes from Alexandre Belloni:
 "Late fixes for the RTC subsystem for 4.4:

  A fix for a nasty hardware bug in rk808 and an initialization
  reordering in da9063 to fix a possible crash"

* tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: da9063: fix access ordering error during RTC interrupt at system power on
  rtc: rk808: Compensate for Rockchip calendar deviation on November 31st

This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.

A problem could occur with the existing RTC driver if:

A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
    ret = devm_request_threaded_irq()
comes before
    rtc->rtc_dev = devm_rtc_device_register();

In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call

    rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);

which in turn tries to access the unavailable rtc->rtc_dev.

The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
insufficiently represented reality, and changed the rules about
calculating leap years to account for this. Similarly, in A.D. 2013
Rockchip hardware engineers found that the new Gregorian calendar still
contained flaws, and that the month of November should be counted up to
31 days instead. Unfortunately it takes a long time for calendar changes
to gain widespread adoption, and just like more than 300 years went by
before the last Protestant nation implemented Greg's proposal, we will
have to wait a while until all religions and operating system kernels
acknowledge the inherent advantages of the Rockchip system. Until then
we need to translate dates read from (and written to) Rockchip hardware
back to the Gregorian format.

This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
on which Rockchip and Gregorian calendars are in sync. From that we can
translate arbitrary later dates back and forth by counting the number
of November/December transitons since the anchor date to determine the
offset between the calendars. We choose this method (rather than trying
to regularly "correct" the date stored in hardware) since it's the only
way to ensure perfect time-keeping even if the system may be shut down
for an unknown number of years. The drawback is that other software
reading the same hardware (e.g. mainboard firmware) must use the same
translation convention (including the same anchor date) to be able to
read and write correct timestamps from/to the RTC.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Pull tty/serial fixes from Greg KH:
 "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
  reported problems.  All of these have been in linux-next.  The details
  are in the shortlog"

* tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix GPF in flush_to_ldisc()
  serial: earlycon: Add missing spinlock initialization
  serial: sh-sci: Fix length of scatterlist
  n_tty: Fix poll() after buffer-limited eof push read
  serial: 8250_uniphier: fix dl_read and dl_write functions

Pull USB fixes from Greg KH:
 "Here are some USB and PHY fixes for 4.4-rc6.  All of them resolve some
  reported problems.  Full details in the shortlog"

* tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: fix invalid memory access in hub_activate()
  USB: ipaq.c: fix a timeout loop
  phy: core: Get a refcount to phy in devm_of_phy_get_by_index()
  phy: cygnus: pcie: add missing of_node_put
  phy: miphy365x: add missing of_node_put
  phy: miphy28lp: add missing of_node_put
  phy: rockchip-usb: add missing of_node_put
  phy: berlin-sata: add missing of_node_put
  phy: mt65xx-usb3: add missing of_node_put
  phy: brcmstb-sata: add missing of_node_put
  phy: sun9i-usb: add USB dependency

Pull md fixes from Neil Brown:
 "Four fixes for md:

   - two recently introduced regressions fixed.
   - one older bug in RAID10 - tagged for -stable since 4.2
   - one minor sysfs api improvement"

* tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
  Fix remove_and_add_spares removes drive added as spare in slot_store
  md: fix bug due to nested suspend
  MD: change journal disk role to disk 0
  md/raid10: fix data corruption and crash during resync

Pull powerpc fixes from Michael Ellerman:
 - Partial revert of "powerpc: Individual System V IPC system calls"
 - pr_warn_once on unsupported OPAL_MSG type from Stewart
 - Fix deadlock in opal-irqchip introduced by "Fix double endian
   conversion" from Alistair

* tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
  powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
  Partial revert of "powerpc: Individual System V IPC system calls"

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

just one regression fix.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: atomic check only enabled crtc states

Pull spi fixes from Mark Brown:
 "A couple of reference counting bugs here, one in spidev and one with
  holding an extra reference in the core that we never freed if we
  removed a device, plus a driver specific fix.  Both of the refcounting
  bugs are very old but they've only been found by observation so
  hopefully their impact has been low"

* tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix parent-device reference leak
  spi: spidev: Hold spi_lock over all defererences of spi in release()
  spi-fsl-dspi: Fix CTAR Register access

Pull GPIO fixes from Linus Walleij:
 "Some GPIO fixes for the v4.4 series.  Most prominent: I revert the
  error propagation from the .get() function until we can fix up all the
  drivers properly for v4.5.

   - Revert the error number propagation from the .get() vtable entry
     temporarily, until we make the proper fixes to all drivers.
   - Fix the clamping behaviour in the generic GPIO driver.
   - Driver fix for the ath79 driver"

* tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: revert get() to non-errorprogating behaviour
  gpio: generic: clamp values from bgpio_get_set()
  gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register