- 16 Apr, 2021 30 commits
-
-
Hayes Wang authored
Use bits operations to record and check the firmware. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hayes Wang authored
Set the maximum inter frame gap time (144ns) for speed 10M/half and 100M/half. It improves the performance for those speeds. And, there is no effect for the other speeds. For 10M/half and 100M/half, the fast inter frame gap time let the device couldn't use the feature of the aggregation effectively, because the transfer would be completed fastly. Therefore, use the maximum value to improve the effect of the aggregation. However, you may not feel the improvement for fast CPUs, because they compensate for the effect of the aggregation. Signed-off-by:
-
Ilya Lipnitskiy authored
The intention is for the loop to timeout if the body does not succeed. The current logic calls time_is_before_jiffies(timeout) which is false until after the timeout, so the loop body never executes. Fix by using readl_poll_timeout as a more standard and less error-prone solution. Fixes: ba37b7ca ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Felix Fietkau <nbd@nbd.name> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Improve socket option handling MPTCP sockets have previously had limited socket option support. The architecture of MPTCP sockets (one userspace-facing MPTCP socket that manages one or more in-kernel TCP subflow sockets) adds complexity for passing options through to lower levels. This patch set adds MPTCP support for socket options commonly used with TCP. Patch 1 reverts an interim socket option fix (a socket option blocklist) that was merged in the net tree for v5.12. Patch 2 moves the socket option code to a separate file, with no functional changes. Patch 3 adds an allowlist for socket options that are known to function with MPTCP. Later patches in this set add more allowed options. Patches 4 and 5 add infrastructure for syncing MPTCP-level options with the TCP subflows. Patches 6-12 add support for specific socket options. Patch 13 adds a socket option self test. ==================== Signed-off-by: -
Florian Westphal authored
Extend mptcp_connect tool with SO_MARK support (-M <value>) and add a test case that checks that the packet mark gets copied to all subflows. This is done by only allowing packets with either skb->mark 1 or 2 via iptables. DROP rule packet counter is checked; if its not zero, print an error message and fail the test case. Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
TCP_CONGESTION is set for all subflows. The mptcp socket gains icsk_ca_ops too so it can be used to keep the authoritative state that should be set on new/future subflows. TCP_INFO will return first subflow only. The out-of-tree kernel has a MPTCP_INFO getsockopt, this could be added later on. Acked-by:
-
Florian Westphal authored
Handle SO_DEBUG and set it on all subflows. Ignore those values not implemented on TCP sockets. Acked-by:
-
Florian Westphal authored
Replicate to all subflows. Acked-by:
-
Florian Westphal authored
Value is synced to all subflows. Acked-by:
-
Florian Westphal authored
Similar to PRIORITY/KEEPALIVE: needs to be mirrored to all subflows. Acked-by:
-
Florian Westphal authored
Similar to previous patch: needs to be mirrored to all subflows. Device bind is simpler: it is only done on the initial (listener) sk. Acked-by:
-
Florian Westphal authored
start with something simple: both take an integer value, both need to be mirrored to all subflows. Acked-by:
-
Florian Westphal authored
Paolo Abeni suggested to avoid re-syncing new subflows because they inherit options from listener. In case options were set on listener but are not set on mptcp-socket there is no need to do any synchronisation for new subflows. This change sets sockopt_seq of new mptcp sockets to the seq of the mptcp listener sock. Subflow sequence is set to the embedded tcp listener sk. Add a comment explaing why sk_state is involved in sockopt_seq generation. Acked-by:
-
Florian Westphal authored
Handle following cases: 1. setsockopt is called with multiple subflows. Change might have to be mirrored to all of them. This is done directly in process context/setsockopt call. 2. Outgoing subflow is created after one or several setsockopt() calls have been made. Old setsockopt changes should be synced to the new socket. 3. Incoming subflow, after setsockopt call(s). Cases 2 and 3 are handled right after the join list is spliced to the conn list. Not all sockopt values can be just be copied by value, some require helper calls. Those can acquire socket lock (which can sleep). If the join->conn list splicing is done from preemptible context, synchronization can be done right away, otherwise its deferred to work queue. Acked-by:
-
Paolo Abeni authored
Unrolling mcast state at msk dismantel time is bug prone, as syzkaller reported: ====================================================== WARNING: possible circular locking dependency detected 5.11.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor905/8822 is trying to acquire lock: ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323 but task is already holding lock: ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline] ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507 which lock already depends on the new lock. Instead we can simply forbid any mcast-related setsockopt. Let's do the same with all other non supported sockopts. Fixes: 717e79c8 ("mptcp: Add setsockopt()/getsockopt() socket operations") Co-developed-by:Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
The MPTCP sockopt implementation is going to be much more big and complex soon. Let's move it to a different source file. No functional change intended. Signed-off-by:
-
Matthieu Baerts authored
This change reverts commit 86581852 ("mptcp: forbit mcast-related sockopt on MPTCP sockets"). As announced in the cover letter of the mentioned patch above, the following commits introduce a larger MPTCP sockopt implementation refactor. This time, we switch from a blocklist to an allowlist. This is safer for the future where new sockoptions could be added while not being fully supported with MPTCP sockets and thus causing unstabilities. Suggested-by:
-
Gatis Peisenieks authored
Tx queue cleanup happens in interrupt handler on same core as rx queue processing. Both can take considerable amount of processing in high packet-per-second scenarios. Sending big amounts of packets can stall the rx processing which is unfair and also can lead to out-of-memory condition since __dev_kfree_skb_irq queues the skbs for later kfree in softirq which is not allowed to happen with heavy load in interrupt handler. This puts tx cleanup in its own napi and enables threaded napi to allow the rx/tx queue processing to happen on different cores. The ability to sustain equal amounts of tx/rx traffic increased: from 280Kpps to 1130Kpps on Threadripper 3960X with upcoming Mikrotik 10/25G NIC, from 520Kpps to 850Kpps on Intel i3-3320 with Mikrotik RB44Ge adapter. Signed-off-by:
Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Pass the BR_FDB_LOCAL information to switchdev drivers Bridge FDB entries with the is_local flag are entries which are terminated locally and not forwarded. Switchdev drivers might want to be notified of these addresses so they can trap them. If they don't program these entries to hardware, there is no guarantee that they will do the right thing with these entries, and they won't be, let's say, flooded. Ideally none of the switchdev drivers should ignore these entries, but having access to the is_local bit is the bare minimum change that should be done in the bridge layer, before this is even possible. These 2 changes are extracted from the larger "RX filtering in DSA" series: https://patchwork.kernel.org/project/netdevbpf/patch/20210224114350.2791260-8-olteanv@gmail.com/ https://patchwork.kernel.org/project/netdevbpf/patch/20210224114350.2791260-9-olteanv@gmail.com/ and submitted separately, because they touch all switchdev drivers, while the rest is mostly specific to DSA. This change is not a functional one, in the sense that everybody still ignores the local FDB entries, but this will be changed by further patches at least for DSA. ==================== Signed-off-by:
-
Vladimir Oltean authored
As explained in bugfix commit 6ab4c311 ("net: bridge: don't notify switchdev for local FDB addresses") as well as in this discussion: https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/ the switchdev notifiers for FDB entries managed to have a zero-day bug, which was that drivers would not know what to do with local FDB entries, because they were not told that they are local. The bug fix was to simply not notify them of those addresses. Let us now add the 'is_local' bit to bridge FDB entries, and make all drivers ignore these entries by their own choice. Co-developed-by:
Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Tobias Waldekranz authored
Instead of having to add more and more arguments to br_switchdev_fdb_call_notifiers, get rid of it and build the info struct directly in br_switchdev_fdb_notify. Signed-off-by:
-
Eric Dumazet authored
We need to store cmlen instead of len in cm->cmsg_len. Fixes: 38ebcf50 ("scm: optimize put_cmsg()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: add standard FEC statistics This set adds uAPI for reporting standard FEC statistics, and implements it in a handful of drivers. The statistics are taken from the IEEE standard, with one extra seemingly popular but not standard statistics added. The implementation is similar to that of the pause frame statistics, user requests the stats by setting a bit (ETHTOOL_FLAG_STATS) in the common ethtool header of ETHTOOL_MSG_FEC_GET. Since standard defines the statistics per lane what's reported is both total and per-lane counters: # ethtool -I --show-fec eth0 FEC parameters for eth0: Configured FEC encodings: None Active FEC encoding: None Statistics: corrected_blocks: 256 Lane 0: 255 Lane 1: 1 uncorrectable_blocks: 145 Lane 0: 128 Lane 1: 17 v2: check for errors in mlx5 register access ==================== Signed-off-by: -
Jakub Kicinski authored
Report corrected bits. v2: catch reg access errors (Saeed) Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
Report what appears to be the standard block counts: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks Don't report the per-lane symbol counts, if those really count symbols they are not what the standard calls for (even if symbols seem like the most useful thing to count.) Fingers crossed that fec_corrected_errors is not in symbols. Signed-off-by:
-
Jakub Kicinski authored
Report corrected bits. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Similarly to pause statistics add stats for FEC. The IEEE standard mandates two sets of counters: - 30.5.1.1.17 aFECCorrectedBlocks - 30.5.1.1.18 aFECUncorrectableBlocks where block is a block of bits FEC operates on. Each of these counters is defined per lane (PCS instance). Multiple vendors provide number of corrected _bits_ rather than/as well as blocks. This set adds the 2 standard-based block counters and a extra one for corrected bits. Counters are exposed to user space via netlink in new attributes. Each attribute carries an array of u64s, first element is the total count, and the following ones are a per-lane break down. Much like with pause stats the operation will not fail when driver does not implement the get_fec_stats callback (nor can the driver fail the operation by returning an error). If stats can't be reported the relevant attributes will be empty. Signed-off-by:
-
Jakub Kicinski authored
Refactor fec_prepare_data() a little bit to skip the body of the function and exit on error. Currently the code depends on the fact that we only have one call which may fail between ethnl_ops_begin() and ethnl_ops_complete() and simply saves the error code. This will get hairy with the stats also being queried. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
We'll need it for FEC stats as well. Signed-off-by:
-
Eric Dumazet authored
Calling two copy_to_user() for very small regions has very high overhead. Switch to inlined unsafe_put_user() to save one stac/clac sequence, and avoid copy_to_user(). Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
- 15 Apr, 2021 10 commits
-
-
Yangbo Lu authored
Convert system_wq queue_work() to schedule_work() which is a wrapper around it, since the former is a rare construct. Fixes: 7294380c ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: updates for -next This series adds support for pushing link status to VFs for the HNS3 ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
To reduce the processing of unnecessary mailbox command when PF supports actively push its link status to VFs, VFs stop sending request link status command in periodic service task in this case. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guangbin Huang authored
Previously, VF updates its link status every second by send query command to PF in periodic service task. If link stats of PF is changed, VF may need at most one second to update its link status. To reduce delay of link status between PF and VFs, PF actively push its link status to VFs when its link status is updated. And to let VF know PF supports this new feature, the link status changed mailbox command adds one bit to indicate it. Signed-off-by:
-
David Bauer authored
The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit in the chip configure register. The driver assumes the copper side is selected on probe, but this might not be the case depending which page was last selected by the bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior. Select the copper page when probing to circumvent this. Signed-off-by:
David Bauer <mail@david-bauer.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-04-14 This series contains updates to ice driver only. Bruce changes and removes open coded values to instead use existing kernel defines and suppresses false cppcheck issues. Ani adds new VSI states to track netdev allocation and registration. He also removes leading underscores in the ice_pf_state enum. Jesse refactors ITR by introducing helpers to reduce duplicated code and structures to simplify checking of ITR mode. He also triggers a software interrupt when exiting napi poll or busy-poll to ensure all work is processed. Modifies /proc/iomem to display driver name instead of PCI address. He also changes the checks of vsi->type to use a local variable in ice_vsi_rebuild() and removes an unneeded struct member. Jake replaces the driver's adaptive interrupt moderation algorithm to use the kernel's DIM library implementation. Scott reworks module reads to reduce the number of reads needed and remove excessive increment of QSFP page. Brett sets the vsi->vf_id to invalid for non-VF VSIs. Paul removes the return value from ice_vsi_manage_rss_lut() as it's not communicating anything critical. He also reduces the scope of a variable. ==================== Signed-off-by: -
Paul M Stillwell Jr authored
The scope of this variable can be reduced so do that. Signed-off-by:
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Paul M Stillwell Jr authored
We were saving the return value from ice_vsi_manage_rss_lut(), but the errors from that function are not critical so change it to return void and remove the code that saved the value. Signed-off-by:
-
Bruce Allan authored
Silence false errors, warnings and style issues reported by cppcheck. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Brett Creeley authored
Currently the vsi->vf_id is set only for ICE_VSI_VF and it's left as 0 for all other VSI types. This is confusing and could be problematic since 0 is a valid vf_id. Fix this by always setting non VF VSI types to ICE_INVAL_VFID. Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
