- 01 May, 2016 32 commits
-
-
Aneesh Kumar K.V authored
Here we create pgtable-64/4k.h and move pmd accessors that are common between hash and radix there. We can't do much sharing with 4K Linux page size because 4K Linux page size with hash config doesn't support THP. So for now it is empty. In later patches we will add functions that does conditional hash/radix accessors there. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
For those pte accessors, that operate on a different set of pte bits between hash/radix, we add a generic variant that does a conditional to hash linux or radix variant. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
In this patch we add the radix Kconfig and conditional check. radix_enabled() is written to always return 0 here. Once we have all needed radix changes added, we will update this to an mmu_feature check. We need to add this early so that we can get it all build in the early stage. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This adds Power ISA 3.0 specific pte defines. We share most of the details with hash Linux page table format. This patch indicates only things where we differ. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Only code movement. No functionality change. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Now that the page table size is a variable, we can move these to generic pgtable.h. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Radix and hash MMU models support different page table sizes. Make the #defines a variable so that existing code can work with variable sizes. Slice related code is only used by hash, so use hash constants there. We will replicate some of the boundary conditions with resepct to TASK_SIZE using radix values too. Right now we do boundary condition check using hash constants. Swapper pgdir size is initialized in asm code. We select the max pgd size to keep it simple. For now we select hash pgdir. When adding radix we will switch that to radix pgdir which is 64K. BUILD_BUG_ON check which is removed is already done in hugepage_init() using MAYBE_BUILD_BUG_ON(). Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
These pte functions will remain the same between radix and hash. Move them to pgtable.h. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Now that we have moved book3s hash64 Linux pte bits to match Power ISA 3.0 radix pte bit positions, we move the matching pte bits to a common header. Only code movement in this patch. No functionality change. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
I am splitting this as a separate patch to get better review. If ok we should merge this with previous patch. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This helps to make following hash only pte bits easier. We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it is in this patch eventhough they use hash specific bits. Using them in radix as it is should be ok, because with radix we expect those bit positions to be zero. Only renames in this patch, no change in functionality. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This patch reduces the number of #ifdefs in C code and will also help in adding radix changes later. Only code movement in this patch. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Propagate copyrights and update GPL text] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
PowerISA 3.0 adds a parition table indexed by LPID. Parition table allows us to specify the MMU model that will be used for guest and host translation. This patch adds support with SLB based hash model (UPRT = 0). What is required with this model is to support the new hash page table entry format and also setup partition table such that we use hash table for address translation. We don't have segment table support yet. In order to make sure we don't load KVM module on Power9 (since we don't have kvm support yet) this patch also disables KVM on Power9. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Add structs and #defines related to the radix MMU partition table format. We also add a ppc_md callback for updating a partition table entry. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Start moving code that is generic between radix and hash to book3s64 specific headers from the book3s64 hash specific one. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
The radix variant is going to require a flush_tlb_range(). With flush_tlb_range() added, ptep_clear_flush_young() is the same as the generic version. So drop the powerpc specific variant. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
The radix variant is going to require a flush_pmd_tlb_range(). With flush_pmd_tlb_range() added, pmdp_clear_flush_young() is the same as the generic version. So drop the powerpc specific variant. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
PowerISA 3.0 introduces two pte bits with the below meaning for radix: 00 -> Normal Memory 01 -> Strong Access Order (SAO) 10 -> Non idempotent I/O (Cache inhibited and guarded) 11 -> Tolerant I/O (Cache inhibited) We drop the existing WIMG bits in the Linux page table in favour of the above constants. We loose _PAGE_WRITETHRU with this conversion. We only use writethru via pgprot_cached_wthru() which is used by fbdev/controlfb.c which is Apple control display and also PPC32. With respect to _PAGE_COHERENCE, we have been marking hpte always coherent for some time now. htab_convert_pte_flags() always added HPTE_R_M. NOTE: KVM changes need closer review. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Use a helper instead of open coding with constants. A later patch will drop the WIMG bits and use PowerISA 3.0 defines. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
PS3 had used a PPP bit hack to implement a read only mapping in the kernel area. Since we are bolting the ioremap area, it used the pte flags _PAGE_PRESENT | _PAGE_USER to get a PPP value of 0x3 there by resulting in a read only mapping. This means the area can be accessed by user space, but kernel will never return such an address to user space. But we can do better by implementing a read only kernel mapping using PPP bits 0b110. This also allows us to do read only kernel mapping for radix in later patches. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
PTE_RPN_SHIFT is actually page size dependent. Even though PowerISA 3.0 expects only the lower 12 bits to be zero, we will always find the pages to be PAGE_SHIFT aligned. In case of hash config, this also allows us to use the additional 3 bits to track pte specific information. We need to make sure we use these bits only for hash specific pte flags. For both 4K and 64K config, pte now can hold 57 bits address. Inorder to keep things simpler, drop PTE_RPN_SHIFT and PTE_RPN_SIZE and specify the 57 bit detail explicitly. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
_PAGE_PRIVILEGED means the page can be accessed only by the kernel. This is done to keep pte bits similar to PowerISA 3.0 Radix PTE format. User pages are now marked by clearing _PAGE_PRIVILEGED bit. Previously we allowed the kernel to have a privileged page in the lower address range (USER_REGION). With this patch such access is denied. We also prevent a kernel access to a non-privileged page in higher address range (ie, REGION_ID != 0). Both the above access scenarios should never happen. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We have a common declaration in pte-common.h Add a book3s specific one and switch to pte_user() in callchain.c. In a subsequent patch we will switch _PAGE_USER to _PAGE_PRIVILEGED in the book3s version only. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
In a subsequent patch we want to add a second definition of pte_user(). Before we do that, make the signature clear, ie. it takes a pte_t and returns bool. We move it up inside the existing #ifndef __ASSEMBLY__ block, but otherwise it's a straight conversion. Convert the call in settlbcam(), which passes an unsigned long, to pass a pte_t. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Subpage protection used to depend on the _PAGE_USER bit to implement no access mode. This patch switches that to use _PAGE_RWX. We clear Read, Write and Execute access from the pte instead of clearing _PAGE_USER now. This was done so that we can switch to _PAGE_PRIVILEGED in a later patch. subpage_protection() returns pte bits that need to be cleared. Instead of updating the interface to handle no-access in a separate way, it appears simpler to clear RWX acecss to indicate no access. We still don't insert hash ptes for no access implied by !_PAGE_RWX. Hence we should not get PROT_FAULT with change. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This splits the _PAGE_RW bit into _PAGE_READ and _PAGE_WRITE. It also removes the dependency on _PAGE_USER for implying read only. Few things to note here is that, we have read implied with write and execute permission. Hence we should always find _PAGE_READ set on hash pte fault. We still can't switch PROT_NONE to !(_PAGE_RWX). Auto numa depends on marking a prot none pte _PAGE_WRITE. (For more details look at b191f9b1 "mm: numa: preserve PTE write permissions across a NUMA hinting fault") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
We can avoid doing endian conversions by using pte_raw() in pxx_same(). The swap of the constant (_PAGE_HPTEFLAGS) should be done at compile time by the compiler. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Traditionally Power server machines have used the Hashed Page Table MMU mode. In this mode Linux manages its own tree of nested page tables, aka. "the Linux page tables", which are not used by the hardware directly, and software loads translations into the hash page table for use by the hardware. Power ISA 3.0 defines a new MMU mode, known as Radix Tree Translation, where the hardware can directly operate on the Linux page tables. However the hardware requires that the page tables be in big endian format. To accommodate this, switch the pgtable types to __be64 and add appropriate endian conversions. Because we will be supporting a single kernel binary that boots using either radix or hash mode, we always store the Linux page tables big endian, even in hash mode where they are not actually used by the hardware. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fix sparse errors, flesh out change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
We have five locations in 64-bit hash MMU code that do a cmpxchg() of a PTE. Currently doing it inline OK, but in a future patch we will be converting the PTEs to __be64 in some configs. In that case we will need casts at every cmpxchg() site in order to keep sparse happy. So move the logic into a helper, this is a reasonably nice cleanup on its own. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
pmd_hugepage_update() is inside #ifdef CONFIG_TRANSPARENT_HUGEPAGE. THP can only be enabled if PPC_BOOK3S_64=y && PPC_64K_PAGES=y, aka. hash64. On hash64 we always define PTE_ATOMIC_UPDATES to 1, meaning the #ifdef in pmd_hugepage_update() is unnecessary, so drop it. That is also the only use of PTE_ATOMIC_UPDATES in any of the hash code, meaning we no longer need to #define it at all in the hash headers. Note it's still #defined and used in the nohash code. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Testing done by Paul Mackerras has shown that with a modern compiler there is no negative effect on code generation from enabling STRICT_MM_TYPECHECKS. So remove the option, and always use the strict type definitions. Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
The driver was requesting for a writethrough mapping. But with those flags we will end up with an SAO mapping because we now have memory conherence always enabled. ie, the existing mapping will end up with a WIMG value 0b1110 which is Strong Access Order. Update this to use cache inhibitted guarded mapping. Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 27 Apr, 2016 1 commit
-
-
Madhavan Srinivasan authored
Minor cleanup patch to replace the raw event hex values in power8-pmu.c with #defines. Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 26 Apr, 2016 6 commits
-
-
Thiago Jung Bauermann authored
In the ppc64 big endian ABI, function symbols point to function descriptors. The symbols which point to the function entry points have a dot in front of the function name. Consequently, when the ftrace filter mechanism searches for the symbol corresponding to an entry point address, it gets the dot symbol. As a result, ftrace filter users have to be aware of this ABI detail on ppc64 and prepend a dot to the function name when setting the filter. The perf probe command insulates the user from this by ignoring the dot in front of the symbol name when matching function names to symbols, but the sysfs interface does not. This patch makes the ftrace filter mechanism do the same when searching symbols. Fixes the following failure in ftracetest's kprobe_ftrace.tc: .../kprobe_ftrace.tc: line 9: echo: write error: Invalid argument That failure is on this line of kprobe_ftrace.tc: echo _do_fork > set_ftrace_filter This is because there's no _do_fork entry in the functions list: # cat available_filter_functions | grep _do_fork ._do_fork This change introduces no regressions on the perf and ftracetest testsuite results. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Daniel Axtens authored
Sparse doesn't seem to be passing -maltivec around properly, leading to lots of errors: .../include/altivec.h:34:2: error: Use the "-maltivec" flag to enable PowerPC AltiVec support arch/powerpc/lib/xor_vmx.c:27:16: error: Expected ; at end of declaration arch/powerpc/lib/xor_vmx.c:27:16: error: got signed arch/powerpc/lib/xor_vmx.c:60:9: error: No right hand side of '*'-expression arch/powerpc/lib/xor_vmx.c:60:9: error: Expected ; at end of statement arch/powerpc/lib/xor_vmx.c:60:9: error: got v1_in ... arch/powerpc/lib/xor_vmx.c:87:9: error: too many errors Only include the altivec.h header for non-__CHECKER__ builds. For builds with __CHECKER__, make up some stubs instead, as suggested by Balbir. (The vector size of 16 is arbitrary.) Suggested-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Daniel Axtens <dja@axtens.net> Tested-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Chris Smart authored
The copy paste facility introduced in POWER9 provides an optimised mechanism for a userspace application to copy a cacheline. This is provided by a pair of instructions, copy and paste, while a third, cp_abort (copy paste abort), provides a clean up of the state in case of a failure. The copy instruction will read a 128 byte cacheline and store it in an internal buffer. The subsequent paste instruction will store this internal buffer to memory and set a CR field if the paste succeeds. Since the state of the copy paste buffer is internal (and not architecturally visible), in the unlikely event of a context switch, the state cannot be stored and the paste should therefore fail. The cp_abort instruction exists to fail and clean up any such interrupted copy paste sequence and is to be called by the kernel as part of the context switch. Doing so prevents data from a preceding copy in one process leaking into the paste of another. This code enables use of the cp_abort instruction if a supported processor is detected. NOTE: this is for userspace only, not in kernel, and does not deal with KVM guests. Patch created with much assistance from Michael Neuling <mikey@neuling.org> Signed-off-by:
Chris Smart <chris@distroguy.com> Reviewed-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Andrew Donnellan authored
mpic_init_sys() currently doesn't check whether subsys_system_register() succeeded or not. Check the return code of subsys_system_register() and clean up if there's an error. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Andrew Donnellan authored
Found by smatch. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
The current code will set _PAGE_USER to the access flags for any fault address, because the ~ operation will be true for all address we take a fault on. But setting _PAGE_USER also means that the fault will be handled only if the page table have _PAGE_USER set. Hence there is no security hole with the current code. Now if it is an user space access, then the change in this patch really don't have an impact because we have (!ctx->kernel) set true and we take the if condition true. Now kernel context created fault on an address in the kernel range will result in a fault loop because we will not insert the hash pte due to access and pte permission mismatch. This patch fix the above issue. Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access") Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 22 Apr, 2016 1 commit
-
-
Frederic Barrat authored
PSL designers recommend a larger value for the mmio hang pulse, 256 us instead of 1 us. The CAIA architecture states that it needs to be smaller than 1/2 of the RTOS timeout set in the PHB for outbound non-posted transactions, which is still (easily) the case here. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Tested-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Tested-by:
Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-