- 25 Jun, 2024 40 commits
-
-
João Paulo Gonçalves authored
The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC) that features two differential or four single-ended inputs through a flexible input multiplexer (MUX), rail-to-rail input buffers, a programmable gain stage, a voltage reference, and an oscillator. Apart from normal single conversion, the driver also supports continuous conversion mode using a triggered buffer. However, in this mode only one channel can be scanned at a time. Datasheet: https://www.ti.com/lit/gpn/ads1119Signed-off-by:
João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20240617183905.4685-1-francesco@dolcini.itSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
João Paulo Gonçalves authored
Add devicetree bindings for Texas Instruments ADS1119 16-bit ADC with I2C interface. Datasheet: https://www.ti.com/lit/gpn/ads1119Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240617183215.4080-2-francesco@dolcini.itSigned-off-by:
-
Trevor Gamblin authored
The current error handling for calls such as devm_clk_get_enabled() in the adi-axi-dac probe() function means that, if a property such as 'clocks' (for example) is not present in the devicetree when booting a kernel with the driver enabled, the resulting error message will be vague, e.g.: |adi_axi_dac 44a00000.dac: probe with driver adi_axi_dac failed with error -2 Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and devm_iio_backend_register() checks to use dev_err_probe() with some context for easier debugging. After the change: |adi_axi_dac 44a00000.dac: error -ENOENT: failed to get clock |adi_axi_dac 44a00000.dac: probe with driver adi_axi_dac failed with error -2 Suggested-by:
Nuno Sa <nuno.sa@analog.com> Tested-by:
Angelo Dureghello <adureghello@baylibre.com> Signed-off-by:
Trevor Gamblin <tgamblin@baylibre.com> Link: https://patch.msgid.link/20240617151820.3337034-1-tgamblin@baylibre.comSigned-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Crt Mori <cmo@melexis.com> Signed-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Tested-By:
Vasileios Amoiridis <vassilisamir@gmail.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
George Stark <gnstark@salutedevices.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
