- 07 May, 2018 40 commits
-
-
Christian Lütke-Stetzkamp authored
The sdr_{read,write}16 macros are never used and does not provide any information about the device, so they are removed. Signed-off-by:Christian Lütke-Stetzkamp <christian@lkamp.de> Reviewed-by:
NeilBrown <neil@brown.name> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Lütke-Stetzkamp authored
The macro msdc_init_gpd_ex is never used and does not provied any information about the hardware, so it is removed. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The field clk_drv of msdc_hw is set to a constant and only used once, replace that position with the constant and remove the unused field. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The field cmd_drv of msdc_hw is set to a constant and only used once, replace that position with the constant and remove the unused field. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The field dat_drv of msdc_hw is set to a constant and only used once, replace that position with the constant and remove the unused field. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The field data_edge of msdc_hw is set to a constant and only used once, replace that position with the constant and remove the unused field. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The field cmd_edge of msdc_hw is set to a constant and only used once, replace that position with the constant and remove the unused field. Signed-off-by:
-
Christian Lütke-Stetzkamp authored
The type pm_message does not exist in the kernel, the correct type is pm_message_t, so the type of the parameter is corrected. Fixes: 9673d9f6 ("staging: mt7621-mmc: Refactor suspend, resume") Signed-off-by:
-
Stefan Wahren authored
Since there is no vchiq function listed by "make checkstack" anymore, we can remove the stack hog issue from the TODO. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Stefan Wahren authored
This removes an unnecessary break which has been reported by checkpatch.pl. Signed-off-by:
-
Stefan Wahren authored
This removing an unnecessary return which has been reported by checkpatch.pl. Signed-off-by:
-
Stefan Wahren authored
This fixes a whitespace issue reported by checkpatch: ERROR: code indent should use tabs where possible Signed-off-by:
-
Stefan Wahren authored
The definition of USE_VCHIQ_ARM and VCOS_VERIFY_BKPTS isn't really necessary so remove them. Signed-off-by:
-
Stefan Wahren authored
The chance to mixup i and j is very high. So rename variable j to a more explaining one. Signed-off-by:
-
Stefan Wahren authored
In order to make the code easier to review, move the second abort criterion into the loop and the incrementation into a separate line. Signed-off-by:
-
Stefan Wahren authored
The kernel would like to have all stack VLA usage removed[1]. The array here is fixed (declared with a const variable) but it appears like a VLA to the compiler. Also, currently we are putting 768 bytes on the stack. This function is only called on the error path so performance is not critical, let's just allocate the memory instead of using the stack. This saves stack space and removes the VLA build warning. kmalloc a buffer for dumping state instead of using the stack. [1]: https://lkml.org/lkml/2018/3/7/621Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stefan Wahren authored
We better use the real loop limit in the warning about "too many active services". Another benefit is than we don't have to care about the format string in the following change. Signed-off-by:
-
Samuel Thibault authored
For software speech syntheses to be able to manage concurrent audio card access, they need to know when speakup stops emitting text to be spoken because the console has switched to graphical mode. This introduces a PAUSE command to do so. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Nathan Chancellor authored
This satisfies a checkpatch.pl warning and is the preferred method for notating the license due to its lack of ambiguity. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
This commit changes types for local variables declared in hostif_phy_information_confirm function to use the preferred one 'u8' and 'u32'. Its values are get using get_byte and get_dword functions which returns 'u8' and 'u32' so it makes sense. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
Local variable 'result_code' is declared as unsigned int in hostif_bss_scan_confirm function. Its value is got calling get_dword which returns an 'u32' so change its type to u32 which is preferred Signed-off-by:
-
Sergio Paracuellos authored
Local variable 'connect_code' is declared as unsigned short in hostif_connect_indication function. Its value is got calling get_word which returns an 'u16' so change its type to u16 which is preferred. Signed-off-by:
-
Sergio Paracuellos authored
Local variable 'auth_type' is declared as unsigned short in hostif_data_indication function. Its value is got calling get_word which returns an 'u16' so change its type to u16 which is preferred. Signed-off-by:
-
Sergio Paracuellos authored
Local variable 'event' is declared as unsigned short in hostif_event_check function. Its value is got calling get_word which returns an 'u16' so change its type to u16 which is preferred. Signed-off-by:
-
Sergio Paracuellos authored
This commit simplify conditional paths in LOCAL_EEPROM_SUM case inside hostif_mib_get_confirm function. It change logic to handle invalid values first and assign good ones at the end if it is the case. Signed-off-by:
-
Sergio Paracuellos authored
This commit changes custom implementation of CIRC_CNT_TO_END. Just use the linux kernel header one to simplify code. Signed-off-by:
-
Sergio Paracuellos authored
This commit refactor a bit ks_get_wireless_stats using ternary operator for return code. It also change a comment to use preferred style. Signed-off-by:
-
Sergio Paracuellos authored
This commit refactors ks_wlan_set_mlme function changing switch-case block for more simple if paths improving readability. Signed-off-by:
-
Sergio Paracuellos authored
Handle invalid values first and assign good ones at the end if it is the case. This makes code simplier. Signed-off-by:
-
Sergio Paracuellos authored
This commit refactors ks_wlan_set_sleep_mode function avoiding to use switch-case statement ans using simple if logic to handle invalid values first. This simplifies data paths as well as improves readability. Signed-off-by:
-
Sergio Paracuellos authored
Instead of use memcpy for copying ethernet addresses, use ether_addr_copy that do the same. Signed-off-by:
-
Sergio Paracuellos authored
Use ether_addr_copy to copy ethernet address instad of using memcpy in ks_wlan_set_mac_address function. Signed-off-by:
-
Sergio Paracuellos authored
This commit refactor hostif_sme_power_mgmt_set avoiding to use switch-case statement and simplifying data paths. This improves readability. Signed-off-by:
-
Sergio Paracuellos authored
Parameters for hostif_power_mgmt_request are declared as unsigned long and then are forced to be change to be u32. Also the caller declares explicitly unsigned long parameters just to assign them and pass into the function. Change types for those to be u32 instead so no conversion is needed at all and code gets more clear. Signed-off-by:
-
Sergio Paracuellos authored
This commit make use of two introduced local variables to make more readable code of hostif_sme_set_rsn function. It just assign those local variables in different cases where are needed and extract common code to assign them at the end. Signed-off-by:
-
Sergio Paracuellos authored
Add blank line after definitions in hostif_aplist_init function to fix a checkpatch script complain about that. Signed-off-by:
-
Sergio Paracuellos authored
Fix some checkpatch complains about long lines in some parts of the code. It also fix some lines where spaces instead of tabs were inserted. Signed-off-by:
-
Sergio Paracuellos authored
In all functions related with requests to the device the same patter in used and is also adding a comment to make clear the intention of the code. Just factor out the pattern into a new send_request_to_device function to improve readability and make clear code intention. Signed-off-by:
-
Sergio Paracuellos authored
WLAN_EID_DS_PARAMS case inside switch case is just doing nothing and it is located inside other cases. There is a place inside the switch with other don't do anything cases are located. Move this to that place. Signed-off-by:
-
Sergio Paracuellos authored
This commit make use of ether_addr_copy to copy ethernet address instead of copy it using memcpy. Signed-off-by:
-
