- 21 Jun, 2022 7 commits
-
-
Hsin-Yi Wang authored
To return the orientation property to drm/kms driver. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> [dianders: fixed space vs. tab indentation and double blank line] Signed-off-by:
-
Hsin-Yi Wang authored
To return the orientation property to drm/kms driver. Signed-off-by:
-
Hsin-Yi Wang authored
To return the orientation property to drm/kms driver. Signed-off-by:
-
Hsin-Yi Wang authored
To return the orientation property to drm/kms driver. Signed-off-by:
-
Hsin-Yi Wang authored
Panels usually call drm_connector_set_panel_orientation(), which is later than drm/kms driver calling drm_dev_register(). This leads to a WARN(). The orientation property is known earlier. For example, some panels parse the property through device tree during probe. Add an API to return the property from panel to drm/kms driver, so the drivers are able to call drm_connector_set_orientation_from_panel() before drm_dev_register(). Suggested-by:
-
Thomas Zimmermann authored
Always run fbdev removal first to remove simpledrm via sysfb_disable(). This clears the internal state. The later call to drm_aperture_detach_drivers() then does nothing. Otherwise, with drm_aperture_detach_drivers() running first, the call to sysfb_disable() uses inconsistent state. Example backtrace show below: [ 11.663422] ================================================================== [ 11.663426] BUG: KASAN: use-after-free in device_del+0x79/0x5f0 [ 11.663435] Read of size 8 at addr ffff888108185050 by task systemd-udevd/311 [ 11.663440] CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5 .19.0-rc2-1-default+ #1689 [ 11.663445] Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011 [ 11.663447] Call Trace: [ 11.663449] <TASK> [ 11.663451] ? device_del+0x79/0x5f0 [ 11.663456] dump_stack_lvl+0x5b/0x73 [ 11.663462] print_address_description.constprop.0+0x1f/0x1b0 [ 11.663468] ? device_del+0x79/0x5f0 [ 11.663471] ? device_del+0x79/0x5f0 [ 11.663475] print_report.cold+0x3c/0x21c [ 11.663481] ? lock_acquired+0x87/0x1e0 [ 11.663484] ? lock_acquired+0x87/0x1e0 [ 11.663489] ? device_del+0x79/0x5f0 [ 11.663492] kasan_report+0xbf/0xf0 [ 11.663498] ? device_del+0x79/0x5f0 [ 11.663503] device_del+0x79/0x5f0 [ 11.663509] ? device_remove_attrs+0x170/0x170 [ 11.663514] ? lock_is_held_type+0xe8/0x140 [ 11.663523] platform_device_del.part.0+0x19/0xe0 [ 11.663530] platform_device_unregister+0x1c/0x30 [ 11.663535] sysfb_disable+0x2d/0x70 [ 11.663540] remove_conflicting_framebuffers+0x1c/0xf0 [ 11.663546] remove_conflicting_pci_framebuffers+0x130/0x1a0 [ 11.663554] drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0 [ 11.663561] ? mgag200_pci_remove+0x30/0x30 [mgag200] [ 11.663578] mgag200_pci_probe+0x2d/0x140 [mgag200] Reported-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Ville Syrjälä authored
Dropping drm_blend.h from drm_crtc.h broke the xlnx driver. Make it build again by including drm_blend.h from the driver directly. My .config was missing some required dependencies so I never build tested it :/ Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 90bb087f ("drm: Drop drm_blend.h from drm_crtc.h") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621075648.7717-1-ville.syrjala@linux.intel.comReviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
- 20 Jun, 2022 28 commits
-
-
Alex Deucher authored
Fixes this warning: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9143:27: warning: variable 'abo' set but not used [-Wunused-but-set-variable] Fixes: 047de3f1 ("drm/amdgpu: switch DM to atomic fence helpers v2") Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616203538.649041-1-alexander.deucher@amd.com
-
Ville Syrjälä authored
drm_crtc.h has no need for drm_connector.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_connector.h. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by:
-
Ville Syrjälä authored
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by:
-
Ville Syrjälä authored
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by:
-
Alexander Stein authored
There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-2-alexander.stein@ew.tq-group.comReviewed-by:
-
Alexander Stein authored
Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER might have several causes, these messages help finding the origin. Signed-off-by:
-
Jiri Vanek authored
Use the same PCLK divide option (divide DSI clock to generate pixel clock) which is set to LVDS Configuration Register (LVCFG) also for a VSync delay calculation. Without this change an auxiliary variable could underflow during the calculation for some dual-link LVDS panels and then calculated VSync delay is wrong. This leads to a shifted picture on a panel. Tested-by:
Jiri Vanek <jirivanek1@gmail.com> Signed-off-by:
Vinay Simha BN <simhavcs@gmail.com> Signed-off-by:
-
Jiri Vanek authored
Function for reading from i2c device register displays error message even if reading ends correctly. Add return to avoid falling through into the fail label. Signed-off-by:
-
Liu Ying authored
Add myself as the maintainer of DRM bridge drivers for i.MX SoCs. Reviewed-by:
Liu Ying <victor.liu@nxp.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Liu Ying authored
This patch adds bindings for i.MX8qm/qxp Control and Status Registers module. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Liu Ying authored
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB) which is officially named as pixel mapper. The LDB has two channels. Each of them supports up to 30bpp parallel input color format and can map the input to VESA or JEIDA standards. The two channels can be used simultaneously, either in dual mode or split mode. In dual mode, the two channels output identical data. In split mode, channel0 outputs odd pixels and channel1 outputs even pixels. This patch supports the LDB single mode and split mode. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by:
-
Liu Ying authored
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB) which is officially named as pixel mapper. The LDB has two channels. Each of them supports up to 24bpp parallel input color format and can map the input to VESA or JEIDA standards. The two channels cannot be used simultaneously, that is to say, the user should pick one of them to use. Two LDB channels from two LDB instances can work together in LDB split mode to support a dual link LVDS display. The channel indexes have to be different. Channel0 outputs odd pixels and channel1 outputs even pixels. This patch supports the LDB single mode and split mode. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by:
-
Liu Ying authored
This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). Reviewed-by:
-
Liu Ying authored
This patch adds a helper to support LDB drm bridge drivers for i.MX SoCs. Helper functions supported by this helper should implement common logics for all LDB modules embedded in i.MX SoCs. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by:
-
Liu Ying authored
This patch adds a drm bridge driver for i.MX8qxp pixel link to display pixel interface(PXL2DPI). The PXL2DPI interfaces the pixel link 36-bit data output and the DSI controller’s MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap the pixel color codings between those modules. The PXL2DPI is purely combinatorial. Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by:
-
Liu Ying authored
This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI). Reviewed-by:
-
Liu Ying authored
This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link. The pixel link forms a standard asynchronous linkage between pixel sources(display controller or camera module) and pixel consumers(imaging or displays). It consists of two distinct functions, a pixel transfer function and a control interface. Reviewed-by:
-
Liu Ying authored
This patch adds bindings for i.MX8qm/qxp display pixel link. Signed-off-by:
-
Liu Ying authored
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner. The pixel combiner takes two output streams from a single display controller and manipulates the two streams to support a number of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as either one screen, two screens, or virtual screens. The pixel combiner is also responsible for generating some of the control signals for the pixel link output channel. For now, the driver only supports the bypass mode. Reviewed-by:
-
Liu Ying authored
This patch adds bindings for i.MX8qm/qxp pixel combiner. Reviewed-by:
-
Liu Ying authored
This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner. The RGB pixels with padding low per component are transmitted on a 30-bit input bus(10-bit per component) from a display controller or a 36-bit output bus(12-bit per component) to a pixel link. Reviewed-by:
-
Liu Ying authored
This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner. The RGB pixels with padding low per component are transmitted on a 30-bit input bus(10-bit per component) from a display controller or a 36-bit output bus(12-bit per component) to a pixel link. Reviewed-by:
-
Xin Ji authored
As V4L2_FWNODE_BUS_TYPE_PARALLEL not properly descript for DPI interface, this patch use new defined V4L2_FWNODE_BUS_TYPE_DPI for it. Fixes: fd0310b6 ("drm/bridge: anx7625: add MIPI DPI input feature") Signed-off-by:
Xin Ji <xji@analogixsemi.com> Tested-by:
Chen-Yu Tsai <wenst@chromium.org> Acked-by:
-
Xin Ji authored
Add 'bus-type' and 'data-lanes' define, bus-type 7 for MIPI DPI input, others for DSI input. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to get new regmap APIs of v5.19-rc1. Signed-off-by: -
Helge Deller authored
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take over the given range (n1...n2) of consoles. The value for n1 and n2 needs to be a positive number and up to (MAX_NR_CONSOLES - 1). The given values were not fully checked against those boundaries yet. To fix the issue, convert first_fb_vc and last_fb_vc to unsigned integers and check them against the upper boundary, and make sure that first_fb_vc is smaller than last_fb_vc. Cc: stable@vger.kernel.org # v4.19+ Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
-
Helge Deller authored
There is no need to directly skip over to the SCROLL_REDRAW case while the logo is still shown. When using DRM, this change has no effect because the code will reach the SCROLL_REDRAW case immediately anyway. But if you run an accelerated fbdev driver and have FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is slowed down by factors so that it feels as if you use a 9600 baud terminal. So, drop those unnecessary checks and speed up fbdev console acceleration during bootup. Cc: stable@vger.kernel.org # v5.10+ Acked-by:
-
- 16 Jun, 2022 5 commits
-
-
Lucas De Marchi authored
It's one argument, vaddr_iomem, not 2 (vaddr and _iomem). Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
pengfuyuan authored
Fix spelling typo in comments. Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
pengfuyuan <pengfuyuan@kylinos.cn> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Imre Deak authored
The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV registers are not read subsequently also as required. Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is done during connector detection. While at it also fix up the same call in drm_dp_mst_dump_topology(). Cc: Lyude Paul <lyude@redhat.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5292Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Samuel Holland authored
Now that the PHY ops are separated, sort them topologically, with the common sun8i_hdmi_phy_set_polarity helper at the top. No function contents are changed in this commit. Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220615045543.62813-7-samuel@sholland.org
-
Samuel Holland authored
Since the driver already needs to support multiple sets of ops, we can drop the mid-layer used by the A83T and H3 PHYs. They share only a small amount of code; factor this out as sun8i_hdmi_phy_set_polarity. For clarity, this commit keeps the existing function order. Signed-off-by:
-
