- 10 Aug, 2017 19 commits
-
-
Peter Zijlstra authored
Now that there are no users of smp_mb__before_spinlock() left, remove it entirely. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Since its inception, our understanding of ACQUIRE, esp. as applied to spinlocks, has changed somewhat. Also, I wonder if, with a simple change, we cannot make it provide more. The problem with the comment is that the STORE done by spin_lock isn't itself ordered by the ACQUIRE, and therefore a later LOAD can pass over it and cross with any prior STORE, rendering the default WMB insufficient (pointed out by Alan). Now, this is only really a problem on PowerPC and ARM64, both of which already defined smp_mb__before_spinlock() as a smp_mb(). At the same time, we can get a much stronger construct if we place that same barrier _inside_ the spin_lock(). In that case we upgrade the RCpc spinlock to an RCsc. That would make all schedule() calls fully transitive against one another. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Peter Zijlstra authored
While we could replace the smp_mb__before_spinlock() with the new smp_mb__after_spinlock(), the normal pattern is to use smp_store_release() to publish an object that is used for lockless_dereference() -- and mirrors the regular rcu_assign_pointer() / rcu_dereference() patterns. Signed-off-by:
-
Peter Zijlstra authored
Commit: af2c1401 ("mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates") added smp_mb__before_spinlock() to set_tlb_flush_pending(). I think we can solve the same problem without this barrier. If instead we mandate that mm_tlb_flush_pending() is used while holding the PTL we're guaranteed to observe prior set_tlb_flush_pending() instances. For this to work we need to rework migrate_misplaced_transhuge_page() a little and move the test up into do_huge_pmd_numa_page(). NOTE: this relies on flush_tlb_range() to guarantee: (1) it ensures that prior page table updates are visible to the page table walker and (2) it ensures that subsequent memory accesses are only made visible after the invalidation has completed This is required for architectures that implement TRANSPARENT_HUGEPAGE (arc, arm, arm64, mips, powerpc, s390, sparc, x86) or otherwise use mm_tlb_flush_pending() in their page-table operations (arm, arm64, x86). This appears true for: - arm (DSB ISB before and after), - arm64 (DSB ISHST before, and DSB ISH after), - powerpc (PTESYNC before and after), - s390 and x86 TLB invalidate are serializing instructions But I failed to understand the situation for: - arc, mips, sparc Now SPARC64 is a wee bit special in that flush_tlb_range() is a no-op and it flushes the TLBs using arch_{enter,leave}_lazy_mmu_mode() inside the PTL. It still needs to guarantee the PTL unlock happens _after_ the invalidate completes. Vineet, Ralf and Dave could you guys please have a look? Signed-off-by:
-
Peter Zijlstra authored
Since we've vastly expanded the atomic_t interface in recent years the existing documentation is woefully out of date and people seem to get confused a bit. Start a new document to hopefully better explain the current state of affairs. The old atomic_ops.txt also covers bitmaps and a few more details so this is not a full replacement and we'll therefore keep that document around until such a time that we've managed to write more text to cover its entire. Also please, ReST people, go away. Signed-off-by:
-
Marc Zyngier authored
Use the new static_branch_enable_cpuslocked() function to switch the workaround static key on the CPU hotplug path. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
As using the normal static key API under the hotplug lock is pretty much impossible, let's provide a variant of some of them that require the hotplug lock to have already been taken. These function are only meant to be used in CPU hotplug callbacks. Signed-off-by:
-
Marc Zyngier authored
In order to later introduce an "already locked" version of some of the static key funcions, let's split the code into the core stuff (the *_cpuslocked functions) and the usual helpers, which now take/release the hotplug lock and call into the _cpuslocked versions. Signed-off-by:
-
Marc Zyngier authored
As we're about to rework the locking, let's move the taking and release of the CPU hotplug lock to locations that will make its reworking completely obvious. Signed-off-by:
-
Peter Zijlstra authored
In the unlikely case text modification does not fully order things, add some extra ordering of our own to ensure we only enabled the fast path after all text is visible. Signed-off-by:
-
Paolo Bonzini authored
Any use of key->enabled (that is static_key_enabled and static_key_count) outside jump_label_lock should handle its own serialization. In the case of cpusets_enabled_key, the key is always incremented/decremented under cpuset_mutex, and hence the same rule applies to nr_cpusets. The rule *is* respected currently, but the mutex is static so nr_cpusets should be static too. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Zefan Li <lizefan@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1501601046-35683-4-git-send-email-pbonzini@redhat.comSigned-off-by:
-
Paolo Bonzini authored
Any use of key->enabled (that is static_key_enabled and static_key_count) outside jump_label_lock should handle its own serialization. The only two that are not doing so are the UDP encapsulation static keys. Change them to use static_key_enable, which now correctly tests key->enabled under the jump label lock. Signed-off-by:
-
Paolo Bonzini authored
static_key_enable/disable are trying to cap the static key count to 0/1. However, their use of key->enabled is outside jump_label_lock so they do not really ensure that. Rewrite them to do a quick check for an already enabled (respectively, already disabled), and then recheck under the jump label lock. Unlike static_key_slow_inc/dec, a failed check under the jump label lock does not modify key->enabled. Signed-off-by:
-
Kirill Tkhai authored
Rename rwsem_down_read_failed() in __rwsem_down_read_failed_common() and teach it to abort waiting in case of pending signals and killable state argument passed. Note, that we shouldn't wake anybody up in EINTR path, as: We check for (waiter.task) under spinlock before we go to out_nolock path. Current task wasn't able to be woken up, so there are a writer, owning the sem, or a writer, which is the first waiter. In the both cases we shouldn't wake anybody. If there is a writer, owning the sem, and we were the only waiter, remove RWSEM_WAITING_BIAS, as there are no waiters anymore. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
Rename __down_read() in __down_read_common() and teach it to abort waiting in case of pending signals and killable state argument passed. Note, that we shouldn't wake anybody up in EINTR path, as: We check for signal_pending_state() after (!waiter.task) test and under spinlock. So, current task wasn't able to be woken up. It may be in two cases: a writer is owner of the sem, or a writer is a first waiter of the sem. If a writer is owner of the sem, no one else may work with it in parallel. It will wake somebody, when it call up_write() or downgrade_write(). If a writer is the first waiter, it will be woken up, when the last active reader releases the sem, and sem->count became 0. Also note, that set_current_state() may be moved down to schedule() (after !waiter.task check), as all assignments in this type of semaphore (including wake_up), occur under spinlock, so we can't miss anything. Signed-off-by:
-
Prateek Sood authored
Fix ordering of link creation between node->prev and prev->next in osq_lock(). A case in which the status of optimistic spin queue is CPU6->CPU2 in which CPU6 has acquired the lock. tail v ,-. <- ,-. |6| |2| `-' -> `-' At this point if CPU0 comes in to acquire osq_lock, it will update the tail count. CPU2 CPU0 ---------------------------------- tail v ,-. <- ,-. ,-. |6| |2| |0| `-' -> `-' `-' After tail count update if CPU2 starts to unqueue itself from optimistic spin queue, it will find an updated tail count with CPU0 and update CPU2 node->next to NULL in osq_wait_next(). unqueue-A tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-B ->tail != curr && !node->next If reordering of following stores happen then prev->next where prev being CPU2 would be updated to point to CPU0 node: tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' -> `-' osq_wait_next() node->next <- 0 xchg(node->next, NULL) tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-C At this point if next instruction WRITE_ONCE(next->prev, prev); in CPU2 path is committed before the update of CPU0 node->prev = prev then CPU0 node->prev will point to CPU6 node. tail v----------. v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' `----------^ At this point if CPU0 path's node->prev = prev is committed resulting in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL currently, tail v ,-. <- ,-. <- ,-. |6| |2| |0| `-' `-' `-' `----------^ so if CPU0 gets into unqueue path of osq_lock it will keep spinning in infinite loop as condition prev->next == node will never be true. Signed-off-by:Prateek Sood <prsood@codeaurora.org> [ Added pictures, rewrote comments. ] Signed-off-by:
-
Peter Zijlstra authored
Those architectures that have a special atomic_set implementation also need a special atomic_set_release(), because for the very same reason WRITE_ONCE() is broken for them, smp_store_release() is too. The vast majority is architectures that have spinlock hash based atomic implementation except hexagon which seems to have a hardware 'feature'. The spinlock based atomics should be SC, that is, none of them appear to place extra barriers in atomic_cmpxchg() or any of the other SC atomic primitives and therefore seem to rely on their spinlock implementation being SC (I did not fully validate all that). Therefore, the normal atomic_set() is SC and can be used at atomic_set_release(). Signed-off-by:
-
Boqun Feng authored
Steven Rostedt reported a potential race in RCU core because of swake_up(): CPU0 CPU1 ---- ---- __call_rcu_core() { spin_lock(rnp_root) need_wake = __rcu_start_gp() { rcu_start_gp_advanced() { gp_flags = FLAG_INIT } } rcu_gp_kthread() { swait_event_interruptible(wq, gp_flags & FLAG_INIT) { spin_lock(q->lock) *fetch wq->task_list here! * list_add(wq->task_list, q->task_list) spin_unlock(q->lock); *fetch old value of gp_flags here * spin_unlock(rnp_root) rcu_gp_kthread_wake() { swake_up(wq) { swait_active(wq) { list_empty(wq->task_list) } * return false * if (condition) * false * schedule(); In this case, a wakeup is missed, which could cause the rcu_gp_kthread waits for a long time. The reason of this is that we do a lockless swait_active() check in swake_up(). To fix this, we can either 1) add a smp_mb() in swake_up() before swait_active() to provide the proper order or 2) simply remove the swait_active() in swake_up(). The solution 2 not only fixes this problem but also keeps the swait and wait API as close as possible, as wake_up() doesn't provide a full barrier and doesn't do a lockless check of the wait queue either. Moreover, there are users already using swait_active() to do their quick checks for the wait queues, so it make less sense that swake_up() and swake_up_all() do this on their own. This patch then removes the lockless swait_active() check in swake_up() and swake_up_all(). Reported-by:Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 09 Aug, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "These are the pin control fixes I have gathered since the return from my vacation. They boiled in -next a while so let's get them in. Apart from the documentation build it is purely driver fixes. Which is nice. The Intel fixes seem kind of important. - Fix the documentation build as the docs were moved - Correct the UART pin list on the Intel Merrifield - Fix pin assignment and number of pins on the Marvell Armada 37xx pin controller - Cover the Setzer models in the Chromebook DMI quirk in the Intel cheryview driver so they start working - Add the missing "sim" function to the sunxi driver - Fix USB pin definitions on Uniphier Pro4 - Smatch fix for invalid reference in the zx pin control driver" * tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: generic: update references to Documentation/pinctrl.txt pinctrl: intel: merrifield: Correct UART pin lists pinctrl: armada-37xx: Fix number of pin in south bridge pinctrl: armada-37xx: Fix the pin 23 on south bridge pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver pinctrl: uniphier: fix USB3 pin assignment for Pro4 pinctrl: zte: fix dereference of 'data' in zx_set_mux() -
Mel Gorman authored
Commit 65d8fc77 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "The main thing is to allow empty id_tables for ACPI to make some drivers get probed again. It looks a bit bigger than usual because it needs some internal renaming, too. Other than that, there is a fix for broken DSTDs, a super simple enablement for ARM MPS, and two documentation fixes which I'd like to see in v4.13 already" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rephrase explanation of I2C_CLASS_DEPRECATED i2c: allow i2c-versatile for ARM MPS platforms i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz i2c: designware: Print clock freq on invalid clock freq error i2c: core: Allow empty id_table in ACPI case as well i2c: mux: pinctrl: mention correct module name in Kconfig help text
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Three patches that should go into this release. Two of them are from Paolo and fix up some corner cases with BFQ, and the last patch is from Ming and fixes up a potential usage count imbalance regression due to the recent NOWAIT work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed block, bfq: consider also in_service_entity to state whether an entity is active block, bfq: reset in_service_entity if it becomes idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix two regressions in the inside-secure driver with respect to hmac(sha1)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: inside-secure - fix the sha state length in hmac_sha1_setkey crypto: inside-secure - fix invalidation check in hmac_sha1_setkey
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "The pull requests are getting smaller, that's progress I suppose :-) 1) Fix infinite loop in CIPSO option parsing, from Yujuan Qi. 2) Fix remote checksum handling in VXLAN and GUE tunneling drivers, from Koichiro Den. 3) Missing u64_stats_init() calls in several drivers, from Florian Fainelli. 4) TCP can set the congestion window to an invalid ssthresh value after congestion window reductions, from Yuchung Cheng. 5) Fix BPF jit branch generation on s390, from Daniel Borkmann. 6) Correct MIPS ebpf JIT merge, from David Daney. 7) Correct byte order test in BPF test_verifier.c, from Daniel Borkmann. 8) Fix various crashes and leaks in ASIX driver, from Dean Jenkins. 9) Handle SCTP checksums properly in mlx4 driver, from Davide Caratti. 10) We can potentially enter tcp_connect() with a cached route already, due to fastopen, so we have to explicitly invalidate it. 11) skb_warn_bad_offload() can bark in legitimate situations, fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) net: avoid skb_warn_bad_offload false positives on UFO qmi_wwan: fix NULL deref on disconnect ppp: fix xmit recursion detection on ppp channels rds: Reintroduce statistics counting tcp: fastopen: tcp_connect() must refresh the route net: sched: set xt_tgchk_param par.net properly in ipt_init_target net: dsa: mediatek: add adjust link support for user ports net/mlx4_en: don't set CHECKSUM_COMPLETE on SCTP packets qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()' hysdn: fix to a race condition in put_log_buffer s390/qeth: fix L3 next-hop in xmit qeth hdr asix: Fix small memory leak in ax88772_unbind() asix: Ensure asix_rx_fixup_info members are all reset asix: Add rx->ax_skb = NULL after usbnet_skb_return() bpf: fix selftest/bpf/test_pkt_md_access on s390x netvsc: fix race on sub channel creation bpf: fix byte order test in test_verifier xgene: Always get clk source, but ignore if it's missing for SGMII ports MIPS: Add missing file for eBPF JIT. bpf, s390: fix build for libbpf and selftest suite ... -
Willem de Bruijn authored
skb_warn_bad_offload triggers a warning when an skb enters the GSO stack at __skb_gso_segment that does not have CHECKSUM_PARTIAL checksum offload set. Commit b2504a5d ("net: reduce skb_warn_bad_offload() noise") observed that SKB_GSO_DODGY producers can trigger the check and that passing those packets through the GSO handlers will fix it up. But, the software UFO handler will set ip_summed to CHECKSUM_NONE. When __skb_gso_segment is called from the receive path, this triggers the warning again. Make UFO set CHECKSUM_UNNECESSARY instead of CHECKSUM_NONE. On Tx these two are equivalent. On Rx, this better matches the skb state (checksum computed), as CHECKSUM_NONE here means no checksum computed. See also this thread for context: http://patchwork.ozlabs.org/patch/799015/ Fixes: b2504a5d ("net: reduce skb_warn_bad_offload() noise") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by:
Nathaniel Roach <nroach44@gmail.com> Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Guillaume Nault authored
Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") dropped the xmit_recursion counter incrementation in ppp_channel_push() and relied on ppp_xmit_process() for this task. But __ppp_channel_push() can also send packets directly (using the .start_xmit() channel callback), in which case the xmit_recursion counter isn't incremented anymore. If such packets get routed back to the parent ppp unit, ppp_xmit_process() won't notice the recursion and will call ppp_channel_push() on the same channel, effectively creating the deadlock situation that the xmit_recursion mechanism was supposed to prevent. This patch re-introduces the xmit_recursion counter incrementation in ppp_channel_push(). Since the xmit_recursion variable is now part of the parent ppp unit, incrementation is skipped if the channel doesn't have any. This is fine because only packets routed through the parent unit may enter the channel recursively. Finally, we have to ensure that pch->ppp is not going to be modified while executing ppp_channel_push(). Instead of taking this lock only while calling ppp_xmit_process(), we now have to hold it for the full ppp_channel_push() execution. This respects the ppp locks ordering which requires locking ->upl before ->downl. Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Håkon Bugge authored
In commit 7e3f2952 ("rds: don't let RDS shutdown a connection while senders are present"), refilling the receive queue was removed from rds_ib_recv(), along with the increment of s_ib_rx_refill_from_thread. Commit 73ce4317 ("RDS: make sure we post recv buffers") re-introduces filling the receive queue from rds_ib_recv(), but does not add the statistics counter. rds_ib_recv() was later renamed to rds_ib_recv_path(). This commit reintroduces the statistics counting of s_ib_rx_refill_from_thread and s_ib_rx_refill_from_cq. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by:
Knut Omang <knut.omang@oracle.com> Reviewed-by:
Wei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Dumazet authored
With new TCP_FASTOPEN_CONNECT socket option, there is a possibility to call tcp_connect() while socket sk_dst_cache is either NULL or invalid. +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4 +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0 +0 connect(4, ..., ...) = 0 << sk->sk_dst_cache becomes obsolete, or even set to NULL >> +1 sendto(4, ..., 1000, MSG_FASTOPEN, ..., ...) = 1000 We need to refresh the route otherwise bad things can happen, especially when syzkaller is running on the host :/ Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Xin Long authored
Now xt_tgchk_param par in ipt_init_target is a local varibale, par.net is not initialized there. Later when xt_check_target calls target's checkentry in which it may access par.net, it would cause kernel panic. Jaroslav found this panic when running: # ip link add TestIface type dummy # tc qd add dev TestIface ingress handle ffff: # tc filter add dev TestIface parent ffff: u32 match u32 0 0 \ action xt -j CONNMARK --set-mark 4 This patch is to pass net param into ipt_init_target and set par.net with it properly in there. v1->v2: As Wang Cong pointed, I missed ipt_net_id != xt_net_id, so fix it by also passing net_id to __tcf_ipt_init. v2->v3: Missed the fixes tag, so add it. Fixes: ecb2421b ("netfilter: add and use nf_ct_netns_get/put") Reported-by:Jaroslav Aster <jaster@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
John Crispin authored
Manually adjust the port settings of user ports once PHY polling has completed. This patch extends the adjust_link callback to configure the per port PMCR register, applying the proper values polled from the PHY. Without this patch flow control was not always getting setup properly. Signed-off-by:
Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by:
Muciri Gatimu <muciri@openmesh.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
Davide Caratti authored
if the NIC fails to validate the checksum on TCP/UDP, and validation of IP checksum is successful, the driver subtracts the pseudo-header checksum from the value obtained by the hardware and sets CHECKSUM_COMPLETE. Don't do that if protocol is IPPROTO_SCTP, otherwise CRC32c validation fails. V2: don't test MLX4_CQE_STATUS_IPV6 if MLX4_CQE_STATUS_IPV4 is set Reported-by:
Shuang Li <shuali@redhat.com> Fixes: f8c6455b ("net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
- 08 Aug, 2017 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "Third set of -rc fixes for 4.13 cycle - small set of miscellanous fixes - a reasonably sizable set of IPoIB fixes that deal with multiple long standing issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hns: checking for IS_ERR() instead of NULL RDMA/mlx5: Fix existence check for extended address vector IB/uverbs: Fix device cleanup RDMA/uverbs: Prevent leak of reserved field IB/core: Fix race condition in resolving IP to MAC IB/ipoib: Notify on modify QP failure only when relevant Revert "IB/core: Allow QP state transition from reset to error" IB/ipoib: Remove double pointer assigning IB/ipoib: Clean error paths in add port IB/ipoib: Add get statistics support to SRIOV VF IB/ipoib: Add multicast packets statistics IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initialization IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qp IB/ipoib: Make sure no in-flight joins while leaving that mcast IB/ipoib: Use cancel_delayed_work_sync when needed IB/ipoib: Fix race between light events and interface restart -
Joe Perches authored
Allow any number of command line arguments to match either the section header or the section contents and create new files. Create MAINTAINERS.new and SECTION.new. This allows scripting of the movement of various sections from MAINTAINERS. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Instead of reading STDIN and writing STDOUT, use specific filenames of MAINTAINERS and MAINTAINERS.new. Use hash references instead of global hash %hash so future modifications can read and write specific hashes to split up MAINTAINERS into multiple files using a script. Signed-off-by:
-
Joe Perches authored
Section [A-Z]: patterns are not currently in any required sorting order. Add a specific sorting sequence to MAINTAINERS entries. Sort F: and X: patterns in alphabetic order. The preferred section ordering is: SECTION HEADER M: Maintainers R: Reviewers P: Named persons without email addresses L: Mailing list addresses S: Status of this section (Supported, Maintained, Orphan, etc...) W: Any relevant URLs T: Source code control type (git, quilt, etc) Q: Patchwork patch acceptance queue site B: Bug tracking URIs C: Chat URIs F: Files with wildcard patterns (alphabetic ordered) X: Excluded files with wildcard patterns (alphabetic ordered) N: Files with regex patterns K: Keyword regexes in source code for maintainership identification Miscellaneous perl neatening: - Rename %map to %hash, map has a different meaning in perl - Avoid using \& and local variables for function indirection - Use return for a little c like clarity - Use c-like function call style instead of &function Signed-off-by:
-
Joe Perches authored
Allow for MAINTAINERS to become a directory and if it is, read all the files in the directory for maintained sections. Optionally look for all files named MAINTAINERS in directories excluding the .git directory by using --find-maintainer-files. This optional feature adds ~.3 seconds of CPU on an Intel i5-6200 with an SSD. Miscellanea: - Create a read_maintainer_file subroutine from the existing code - Test only the existence of MAINTAINERS, not whether it's a file Signed-off-by:
-
Randy Dunlap authored
The openbmc mailing list is moderated for non-subscribers. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Sedat Dilek authored
Fixes: f47e07bc ("Fix up MAINTAINERS file problems") Cc: Joe Perches <joe@perches.com> Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
