Add support to change and retrieve global vlan multicast router state
which is used for the bridge itself. We just need to pass multicast context
to br_multicast_set_router instead of bridge device and the rest of the
logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast querier state.
We just need to pass multicast context to br_multicast_set_querier
instead of bridge device and the rest of the logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is a minor optimization and better behaviour to make sure querier and
query sending routines affect only the matching multicast context
depending if vlan snooping is enabled (vlan ctx vs bridge ctx).
It also avoids sending unnecessary extra query packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to have the querier state per multicast context in order to have
per-vlan control, so remove the internal option bit and move it to the
multicast context. Also annotate the lockless reads of the new variable.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast startup query
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast query response
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast query interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast querier interval
option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast membership
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast last member
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast startup query
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan multicast last member
count option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to change and retrieve global vlan IGMP/MLD versions.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: use runtime PM reference counting

This series does further rework of the IPA clock code so that we
rely on some of the core runtime power management code (including
its referencing counting) instead.

The first patch makes ipa_clock_get() act like pm_runtime_get_sync().

The second patch makes system suspend occur regardless of the
current reference count value, which is again more like how the
runtime PM core code behaves.

The third patch creates functions to encapsulate all hardware
suspend and resume activity.  The fourth uses those functions as
the ->runtime_suspend and ->runtime_resume power callbacks.  With
that in place, ipa_clock_get() and ipa_clock_put() are changed to
use runtime PM get and put functions when needed.

The fifth patch eliminates an extra clock reference previously used
to control system suspend.  The sixth eliminates the "IPA clock"
reference count and mutex.

The final patch replaces the one call to ipa_clock_get_additional()
with a call to pm_runtime_get_if_active(), making the former
unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that ipa_clock_get_additional() is a trivial wrapper around
pm_runtime_get_if_active(), just open-code it in its only caller
and delete the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The runtime power management core code maintains a usage count.  This
count mirrors the IPA clock reference count, and there's no need to
maintain both.  So get rid of the IPA clock reference count and just
rely on the runtime PM usage count to determine when the hardware
should be suspended or resumed.

Use pm_runtime_get_if_active() in ipa_clock_get_additional().  We
care whether power is active, regardless of whether it's in use, so
pass true for its ign_usage_count argument.

The IPA clock mutex is just used to make enabling/disabling the
clock and updating the reference count occur atomically.  Without
the reference count, there's no need for the mutex, so get rid of
that too.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suspending the IPA hardware is now managed by the runtime PM core
code.  The ->runtime_idle callback returns a non-zero value, so it
will never suspend except when forced.  As a result, there's no need
to take an extra "do not suspend" clock reference.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the runtime power management core to cause hardware suspend and
resume to occur.  Enable it in ipa_clock_init() (without autosuspend),
and disable it in ipa_clock_exit().

Use ipa_runtime_suspend() as the ->runtime_suspend power operation,
and arrange for it to be called by having ipa_clock_get() call
pm_runtime_get_sync() when the first clock reference is taken.
Similarly, use ipa_runtime_resume() as the ->runtime_resume power
operation, and pm_runtime_put() when the last IPA clock reference
is dropped.

Introduce ipa_runtime_idle() as the ->runtime_idle power operation,
and have it return a non-zero value; this way suspend will never
occur except when forced.

Use pm_runtime_force_suspend() and pm_runtime_force_resume() as the
system suspend and resume callbacks, and remove ipa_suspend() and
ipa_resume().

Store a pointer to the device structure passed to ipa_clock_init(),
so it can be used by ipa_clock_exit() to disable runtime power
management.

For now we preserve IPA clock reference counting.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce ipa_runtime_suspend() and ipa_runtime_resume(), which
encapsulate the activities necessary for suspending and resuming
the IPA hardware.  Call these functions from ipa_clock_get() and
ipa_clock_put() when the first reference is taken or last one is
dropped.

When the very first clock reference is taken (for ipa_config()),
setup isn't complete yet, so (as before) only the core clock gets
enabled.

When the last clock reference is dropped (after ipa_deconfig()),
ipa_teardown() will have made the setup_complete flag false, so
there too, the core clock will be stopped without affecting GSI
or the endpoints.

Otherwise these new functions will perform the desired suspend and
resume actions once setup is complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Disable the IPA clock rather than dropping a reference to it in the
system suspend callback.  This forces the suspend to occur without
affecting existing references.

Similarly, enable the clock rather than taking a reference in
ipa_resume(), forcing a resume without changing the reference count.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently assume no errors occur when enabling or disabling the
IPA core clock and interconnects.  And although this commit exposes
errors that could occur, we generally assume this won't happen in
practice.

This commit changes ipa_clock_get() and ipa_clock_put() so each
returns a value.  The values returned are meant to mimic what the
runtime power management functions return, so we can set up error
handling here before we make the switch.  Have ipa_clock_get()
increment the reference count even if it returns an error, to match
the behavior of pm_runtime_get().

More details follow.

When taking a reference in ipa_clock_get(), return 0 for the first
reference, 1 for subsequent references, or a negative error code if
an error occurs.  Note that if ipa_clock_get() returns an error, we
must not touch hardware; in some cases such errors now cause entire
blocks of code to be skipped.

When dropping a reference in ipa_clock_put(), we return 0 or an
error code.  The error would come from ipa_clock_disable(), which
now returns what ipa_interconnect_disable() returns (either 0 or a
negative error code).  For now, callers ignore the return value;
if an error occurs, a message will have already been logged, and
little more can actually be done to improve the situation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Use nfnetlink_unicast() instead of netlink_unicast() in nft_compat.

2) Remove call to nf_ct_l4proto_find() in flowtable offload timeout
   fixup.

3) CLUSTERIP registers ARP hook on demand, from Florian.

4) Use clusterip_net to store pernet warning, also from Florian.

5) Remove struct netns_xt, from Florian Westphal.

6) Enable ebtables hooks in initns on demand, from Florian.

7) Allow to filter conntrack netlink dump per status bits,
   from Florian Westphal.

8) Register x_tables hooks in initns on demand, from Florian.

9) Remove queue_handler from per-netns structure, again from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there's support for filtering neighbours/links for interfaces
which have a specific master device (using the IFLA_MASTER/NDA_MASTER
attributes).

This patch adds support for filtering interfaces/neighbours dump for
interfaces that *don't* have a master.
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210810090658.2778960-1-lschlesinger@drivenets.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tc_new_tfilter() can replay a request if it got EAGAIN. The cited commit
didn't account for this when it converted TC action ->init() API
to use flags instead of parameters. This can lead to passing stale flags
down the call chain which results in trying to lock rtnl when it's
already locked, deadlocking the entire system.

Fix by making sure to reset flags on each replay.

============================================
WARNING: possible recursive locking detected
5.14.0-rc3-custom-49011-g3d2bbb4f104d #447 Not tainted
--------------------------------------------
tc/37605 is trying to acquire lock:
ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_setup_cb_add+0x14b/0x4d0

but task is already holding lock:
ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_new_tfilter+0xb12/0x22e0

other info that might help us debug this:
 Possible unsafe locking scenario:
       CPU0
       ----
  lock(rtnl_mutex);
  lock(rtnl_mutex);

 *** DEADLOCK ***
 May be due to missing lock nesting notation
1 lock held by tc/37605:
 #0: ffffffff841df2f0 (rtnl_mutex){+.+.}-{3:3}, at: tc_new_tfilter+0xb12/0x22e0

stack backtrace:
CPU: 0 PID: 37605 Comm: tc Not tainted 5.14.0-rc3-custom-49011-g3d2bbb4f104d #447
Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017
Call Trace:
 dump_stack_lvl+0x8b/0xb3
 __lock_acquire.cold+0x175/0x3cb
 lock_acquire+0x1a4/0x4f0
 __mutex_lock+0x136/0x10d0
 fl_hw_replace_filter+0x458/0x630 [cls_flower]
 fl_change+0x25f2/0x4a64 [cls_flower]
 tc_new_tfilter+0xa65/0x22e0
 rtnetlink_rcv_msg+0x86c/0xc60
 netlink_rcv_skb+0x14d/0x430
 netlink_unicast+0x539/0x7e0
 netlink_sendmsg+0x84d/0xd80
 ____sys_sendmsg+0x7ff/0x970
 ___sys_sendmsg+0xf8/0x170
 __sys_sendmsg+0xea/0x1b0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7b93b6c0a7
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48>
RSP: 002b:00007ffe365b3818 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b93b6c0a7
RDX: 0000000000000000 RSI: 00007ffe365b3880 RDI: 0000000000000003
RBP: 00000000610a75f6 R08: 0000000000000001 R09: 0000000000000000
R10: fffffffffffff3a9 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffe365b7b58 R15: 00000000004822c0

Fixes: 695176bf ("net_sched: refactor TC action init API")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20210810034305.63997-1-mbloch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
pull-request: mlx5-next 2020-08-9

This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.

1) mlx5 single E-Switch FDB for lag

2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq

3) Add DCS caps & fields support

[1] https://patchwork.kernel.org/project/netdevbpf/cover/20210803231959.26513-1-saeed@kernel.org/

[2] https://patchwork.kernel.org/project/netdevbpf/patch/0e3364dab7e0e4eea5423878b01aa42470be8d36.1626609184.git.leonro@nvidia.com/

[3] https://patchwork.kernel.org/project/netdevbpf/patch/55e1d69bef1fbfa5cf195c0bfcbe35c8019de35e.1624258894.git.leonro@nvidia.com/

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Lag, Create shared FDB when in switchdev mode
  net/mlx5: E-Switch, add logic to enable shared FDB
  net/mlx5: Lag, move lag destruction to a workqueue
  net/mlx5: Lag, properly lock eswitch if needed
  net/mlx5: Add send to vport rules on paired device
  net/mlx5: E-Switch, Add event callback for representors
  net/mlx5e: Use shared mappings for restoring from metadata
  net/mlx5e: Add an option to create a shared mapping
  net/mlx5: E-Switch, set flow source for send to uplink rule
  RDMA/mlx5: Add shared FDB support
  {net, RDMA}/mlx5: Extend send to vport rules
  RDMA/mlx5: Fill port info based on the relevant eswitch
  net/mlx5: Lag, add initial logic for shared FDB
  net/mlx5: Return mdev from eswitch
  IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq
  net/mlx5: Add DCS caps & fields support
====================

Link: https://lore.kernel.org/r/20210809202522.316930-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This was done to detect when the pernet->init() function was not called
yet, by checking if net->nf.queue_handler is NULL.

Once the nfnetlink_queue module is active, all struct net pointers
contain the same address.  So place this back in nf_queue.c.

Handle the 'netns error unwind' test by checking nfnl_queue_net for a
NULL pointer and add a comment for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Daniel Borkmann says:

====================
bpf-next 2021-08-10

We've added 31 non-merge commits during the last 8 day(s) which contain
a total of 28 files changed, 3644 insertions(+), 519 deletions(-).

1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki.

2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from
   32-bit MIPS JIT development, from Johan Almbladh.

3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev.

4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko.

5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang.

6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet.

7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover,
   and Muhammad Falak R Wani.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
  bpf, tests: Add tail call test suite
  bpf, tests: Add tests for BPF_CMPXCHG
  bpf, tests: Add tests for atomic operations
  bpf, tests: Add test for 32-bit context pointer argument passing
  bpf, tests: Add branch conversion JIT test
  bpf, tests: Add word-order tests for load/store of double words
  bpf, tests: Add tests for ALU operations implemented with function calls
  bpf, tests: Add more ALU64 BPF_MUL tests
  bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64
  bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH
  bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations
  bpf, tests: Fix typos in test case descriptions
  bpf, tests: Add BPF_MOV tests for zero and sign extension
  bpf, tests: Add BPF_JMP32 test cases
  samples, bpf: Add an explict comment to handle nested vlan tagging.
  selftests/bpf: Add tests for XDP bonding
  selftests/bpf: Fix xdp_tx.c prog section name
  net, core: Allow netdev_lower_get_next_private_rcu in bh context
  bpf, devmap: Exclude XDP broadcast to master device
  net, bonding: Add XDP support to the bonding driver
  ...
====================

Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While BPF_CALL instructions were tested implicitly by the cBPF-to-eBPF
translation, there has not been any tests for BPF_TAIL_CALL instructions.
The new test suite includes tests for tail call chaining, tail call count
tracking and error paths. It is mainly intended for JIT development and
testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-15-johan.almbladh@anyfinetworks.com

Tests for BPF_CMPXCHG with both word and double word operands. As with
the tests for other atomic operations, these tests only check the result
of the arithmetic operation. The atomicity of the operations is not tested.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-14-johan.almbladh@anyfinetworks.com

Tests for each atomic arithmetic operation and BPF_XCHG, derived from
old BPF_XADD tests. The tests include BPF_W/DW and BPF_FETCH variants.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-13-johan.almbladh@anyfinetworks.com

On a 32-bit architecture, the context pointer will occupy the low
half of R1, and the other half will be zero.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-12-johan.almbladh@anyfinetworks.com

Some JITs may need to convert a conditional jump instruction to
to short PC-relative branch and a long unconditional jump, if the
PC-relative offset exceeds offset field width in the CPU instruction.
This test triggers such branch conversion on the 32-bit MIPS JIT.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-11-johan.almbladh@anyfinetworks.com

A double word (64-bit) load/store may be implemented as two successive
32-bit operations, one for each word. Check that the order of those
operations is consistent with the machine endianness.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-10-johan.almbladh@anyfinetworks.com

32-bit JITs may implement complex ALU64 instructions using function calls.
The new tests check aspects related to this, such as register clobbering
and register argument re-ordering.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-9-johan.almbladh@anyfinetworks.com

This patch adds BPF_MUL tests for 64x32 and 64x64 multiply. Mainly
testing 32-bit JITs that implement ALU64 operations with two 32-bit
CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-8-johan.almbladh@anyfinetworks.com

This patch adds a number of tests for BPF_LSH, BPF_RSH amd BPF_ARSH
ALU64 operations with values that may trigger different JIT code paths.
Mainly testing 32-bit JITs that implement ALU64 operations with two
32-bit CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-7-johan.almbladh@anyfinetworks.com

This patch adds more tests of ALU32 shift operations BPF_LSH and BPF_RSH,
including the special case of a zero immediate. Also add corresponding
BPF_ARSH tests which were missing for ALU32.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-6-johan.almbladh@anyfinetworks.com

This patch adds tests of BPF_AND, BPF_OR and BPF_XOR with different
magnitude of the immediate value. Mainly checking 32-bit JIT sub-word
handling and zero/sign extension.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-5-johan.almbladh@anyfinetworks.com

This patch corrects the test description in a number of cases where
the description differed from what was actually tested and expected.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-4-johan.almbladh@anyfinetworks.com

Tests for ALU32 and ALU64 MOV with different sizes of the immediate
value. Depending on the immediate field width of the native CPU
instructions, a JIT may generate code differently depending on the
immediate value. Test that zero or sign extension is performed as
expected. Mainly for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-3-johan.almbladh@anyfinetworks.com