- 02 Oct, 2018 40 commits
-
-
John David Anglin authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 3b885ac1 upstream. Now that mb() is an instruction barrier, it will slow performance if we issue unnecessary barriers. The spinlock defines have a number of unnecessary barriers. The __ldcw() define is both a hardware and compiler barrier. The mb() barriers in the routines using __ldcw() serve no purpose. The only barrier needed is the one in arch_spin_unlock(). We need to ensure all accesses are complete prior to releasing the lock. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Elad Raz authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 08474cc1 upstream. Disallow adding interfaces to a bridge when vlan filtering operation failed. Send the failure code to the user. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 4576cd46 upstream. TPACKET_V3 stores variable length frames in fixed length blocks. Blocks must be able to store a block header, optional private space and at least one minimum sized frame. Frames, even for a zero snaplen packet, store metadata headers and optional reserved space. In the block size bounds check, ensure that the frame of the chosen configuration fits. This includes sockaddr_ll and optional tp_reserve. Syzbot was able to construct a ring with insuffient room for the sockaddr_ll in the header of a zero-length frame, triggering an out-of-bounds write in dev_parse_header. Convert the comparison to less than, as zero is a valid snap len. This matches the test for minimum tp_frame_size immediately below. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Fixes: eb73190f ("net/packet: refine check for priv area size") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 6613b617 upstream. When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack that has an un-initialized timeout value, i.e. such entry could be reaped at any time. Mark them as INVALID and only ignore SYNC/SYNCACK when connection had an old state. Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 45c180bc upstream. struct xfrm_userpolicy_type has two holes, so we should not use C99 style initializer. KMSAN report: BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copyout lib/iov_iter.c:140 [inline] _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 copy_to_iter include/linux/uio.h:106 [inline] skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline] netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959 sock_recvmsg_nosec net/socket.c:802 [inline] sock_recvmsg+0x1d6/0x230 net/socket.c:809 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472 __do_sys_recvmmsg net/socket.c:2485 [inline] __se_sys_recvmmsg net/socket.c:2481 [inline] __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x446ce9 RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9 RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000 R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413 __nla_put lib/nlattr.c:569 [inline] nla_put+0x276/0x340 lib/nlattr.c:627 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline] dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323 netlink_dump_start include/linux/netlink.h:214 [inline] xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Local variable description: ----upt.i@dump_one_policy Variable was created at: dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 Byte 130 of 137 is uninitialized Memory access starts at ffff88019550407f Fixes: c0144bea ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
John David Anglin authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 7797167f upstream. Now that we use a sync prior to releasing the locks in syscall.S, we don't need the PA 2.0 ordered stores used to release some locks. Using an ordered store, potentially slows the release and subsequent code. There are a number of other ordered stores and loads that serve no purpose. I have converted these to normal stores. Signed-off-by:
-
Jeremy Cline authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 1a5d5e5d upstream. 'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to index arrays which makes it a potential spectre gadget. Fix this by sanitizing the value assigned to 'ac->ac2_order'. This covers the following accesses found with the help of smatch: * fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential spectre issue 'grp->bb_counters' [w] (local cap) * fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap) * fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap) Suggested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1792377 commit 9432a317 upstream. A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Daniel Rosenberg authored
BugLink: https://bugs.launchpad.net/bugs/1792377 This patch is against 4.4. It does not apply to master due to a large rework of ion in 4.12 which removed the affected functions altogther. 4c23cbff ("staging: android: ion: Remove import interface") Userspace can cause the kref to handles to increment arbitrarily high. Ensure it does not overflow. Signed-off-by:
Daniel Rosenberg <drosen@google.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit e56b8ce3 ] Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by:
積丹尼 Dan Jacobson <jidanni@jidanni.org> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 50973993 ] In cases the probing fails the log level of the messages should be an error. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 711c62df ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit b2bab426 ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by:
-
David Lechner authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 3a9b0455 ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit c1334597 ] CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 7f073d01 ] The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a95 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Yuchung Cheng authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit a69258f7 ] After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 5fc853cc ] We accidentally left out the error handling for kstrtoul(). Fixes: a520030e ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 993675a3 ] If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by:
-
Alexander Duyck authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit d14c780c ] This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Adam Ford authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 92384741 ] The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit b4c7e2bd ] Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 16239630 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.homeReported-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kim Phillips authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit f6432b9f ] Like system(), popen() calls /bin/sh, which may/may not be bash. Script when run on dash and encounters the line, yields: exit: Illegal number: -1 checkbashisms report on script content: possible bashism (exit|return with negative status code): exit -1 Remove the bashism and use the more portable non-zero failure status code 1. Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vikas Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit c58387ab ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit d378859a ] The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by:
-
Stefan Schmidt authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 8f2fbc6c ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Stefan Schmidt authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 8a81388e ] Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by:
-
Stefan Schmidt authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 20f33045 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by:
-
Daniel Mack authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 0c1049dc ] PXA3xx platforms have 56 interrupts that are stored in two ICMR registers. The code in pxa_irq_suspend() and pxa_irq_resume() however does a simple division by 32 which only leads to one register being saved at suspend and restored at resume time. The NAND interrupt setting, for instance, is lost. Fix this by using DIV_ROUND_UP() instead. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit d376bef9 ] nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by:
-
Yuiko Oshino authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit d461e3da ] In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
-
Zhen Lei authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 1e8e18f6 ] There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
Dmitriy Vyukov <dvyukov@google.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mathieu Malaterre authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 26b68dd2 ] Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 2ceb2780 ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 157bcc06 ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like imx51-babbge. This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit 03e6275a ("usb: chipidea: Fix ULPI on imx51"). Suggested-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Jason Gerecke authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 3b8d5735 ] The touch sensors on the 2nd-gen Intuos tablets don't use a 4096x4096 sensor like other similar tablets (3rd-gen Bamboo, Intuos5, etc.). The incorrect maximum XY values don't normally affect userspace since touch input from these devices is typically relative rather than absolute. It does, however, cause problems when absolute distances need to be measured, e.g. for gesture recognition. Since the resolution of the touch sensor on these devices is 10 units / mm (versus 100 for the pen sensor), the proper maximum values can be calculated by simply dividing by 10. Fixes: b5fd2a3e ("Input: wacom - add support for three new Intuos devices") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Greg Ungerer authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit ecd60532 ] Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5ea ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea #13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> CC: Matthew Wilcox <willy@infradead.org> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 484c016d ] Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit 7b7aa62c ] The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1792377 [ Upstream commit ab337fc2 ] Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by:
-
