- 10 Apr, 2017 40 commits
-
-
Hans Verkuil authored
The em28xx driver still used the soc_camera.h header for the ov2640 driver. Since this driver no longer uses soc_camera, that include can be removed. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
The MC support is needed by the em28xx driver. Signed-off-by:
-
Hans Verkuil authored
Convert v4l2_clk to normal clk and enable the clock. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hans Verkuil authored
Convert ov2640 to a standard subdev driver. The soc-camera driver no longer uses this driver, so it can safely be converted. Signed-off-by:
-
Hans Verkuil authored
It is a bit confusing how CEC_CAP_RC and IS_REACHABLE(CONFIG_RC_CORE) interact. By stripping CEC_CAP_RC at the beginning rather than after #else it should be a bit clearer what is going on. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Currently when the RC Core is enabled (reachable) core code located in cec_register_adapter() attempts to populate the RC structure with a pointer to the 'parent' passed in by the caller. Unfortunately if the caller did not specify RC capability when calling cec_allocate_adapter(), then there will be no RC structure to populate. This causes a "NULL pointer dereference" error. Fixes: f51e8080 ("[media] cec: pass parent device in register(), not allocate()") Signed-off-by:
-
Hans Verkuil authored
By using the CEC notifier framework there is no longer any reason to manually set the physical address. This was the one blocking issue that prevented this driver from going out of staging, so do this move as well. Update the bindings documenting the new hdmi phandle and update exynos4.dtsi accordingly. Tested with my Odroid U3. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> CC: linux-samsung-soc@vger.kernel.org Signed-off-by:
-
Hans Verkuil authored
Update the bindings documenting the new hdmi phandle. Signed-off-by:
Rob Herring <robh@kernel.org> CC: linux-samsung-soc@vger.kernel.org CC: devicetree@vger.kernel.org Signed-off-by:
-
Hans Verkuil authored
Add the new hdmi phandle to exynos4.dtsi. This phandle is needed by the s5p-cec driver to initialize the CEC notifier framework. Tested with my Odroid U3. Signed-off-by:
-
Hans Verkuil authored
Implement the CEC notifier support to allow CEC drivers to be informed when there is a new physical address. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Benjamin Gaignard authored
To use CEC notifier sti CEC driver needs to get phandle of the hdmi device. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Benjamin Gaignard authored
By using the CEC notifier framework there is no longer any reason to manually set the physical address. This was the one blocking issue that prevented this driver from going out of staging, so do this move as well. Signed-off-by:
-
Benjamin Gaignard authored
Update the bindings documentation with the new hdmi phandle. Signed-off-by:
-
Benjamin Gaignard authored
Implement the CEC notifier support to allow CEC drivers to be informed when there is a new physical address. Signed-off-by:
-
Hans Verkuil authored
Support the CEC notifier framework, simplifying drivers that depend on this. Signed-off-by:
-
Hans Verkuil authored
Add support for CEC notifiers, which is used to convey CEC physical address information from video drivers to their CEC counterpart driver(s). Based on an earlier version from Russell King: https://patchwork.kernel.org/patch/9277043/ The cec_notifier is a reference counted object containing the CEC physical address state of a video device. When a new notifier is registered the current state will be reported to that notifier at registration time. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 PER. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 CNR. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 signal strength on relative scale. Signed-off-by:
-
Hans Verkuil authored
This driver supports the RainShadow Tech USB HDMI CEC adapter. See: http://rainshadowtech.com/HdmiCecUsb.htmlSigned-off-by:
-
Hans Verkuil authored
Add a new serio ID for the RainShadow Tech USB HDMI CEC adapter. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kieran Bingham authored
The DRM object does not register the pipe with the WPF object. This is used internally throughout the driver as a means of accessing the pipe. As such this breaks operations which require access to the pipe from WPF interrupts. Register the pipe inside the WPF object after it has been declared as the output. Fixes: ff7e97c9 ("[media] v4l: vsp1: Store pipeline pointer in rwpf") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The struct vsp1_drm references a member 'planes' which doesn't exist. Correctly identify this documentation against the 'inputs' Signed-off-by:
-
Laurent Pinchart authored
While all VSP instances can process HSV internally, on Gen3 hardware reading or writing HSV24 or HSV32 from/to memory causes the device to hang. Disable those pixel formats on Gen3 hardware. Signed-off-by:
-
Laurent Pinchart authored
Fix all multi-line comments to comply with the kernel coding style. Signed-off-by:
-
Kieran Bingham authored
The pipe->dl is used only inside vsp1_du_atomic_flush(), and can be obtained and stored locally to simplify the code. Signed-off-by:
-
Kieran Bingham authored
With multiple inputs through the BRU it is feasible for the streams to race each other at stream-on. Multiple VIDIOC_STREAMON calls racing each other could have process N-1 skipping over the pipeline setup section and then start the pipeline early, if videobuf2 has already enqueued buffers to the driver for process N but not called the .start_streaming() operation yet In the case of the video pipelines, this can present two serious issues. 1) A null-dereference if the pipe->dl is committed at the same time as the vsp1_video_setup_pipeline() is processing 2) A hardware hang, where a display list is committed without having called vsp1_video_setup_pipeline() first Repair this issue, by ensuring that only the stream which configures the pipeline is able to start it. Signed-off-by: -
Laurent Pinchart authored
The RPF and WPF U/V order bits have no effect for 3-planar formats on Gen3 hardware. Swap the U and V planes addresses manually instead in that case. Fixes: b915bd24 ("[media] v4l: vsp1: Add tri-planar memory formats support") Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Shailendra Verma authored
v4l2_fh_init is already done. So call the v4l2_fh_exit in error condition before returing from the function. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> Reviewed-by:
-
Kieran Bingham authored
Minor tweaks to document the swap register and make the documentation match the struct ordering Signed-off-by:
Kieran Bingham <kieran@bingham.xyz> Reviewed-by:
-
Hans Verkuil authored
The documentation for video capture and output devices claims that the video standard ioctls are required. This is not the case, they are only required for PAL/NTSC/SECAM type inputs and outputs. Sensors do not implement this at all and e.g. HDMI inputs implement the DV Timings ioctls. Just drop the mention of 'video standard' ioctls. Signed-off-by:
-
Hans Verkuil authored
The driver moved to drivers/media/platform/atmel. Signed-off-by:
-
Hans Verkuil authored
Update the bindings for this device based on a working DT example. Signed-off-by:
-
Hans Verkuil authored
The colorspace is independent of whether YUV or RGB is sent to the SoC. Fix this. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Hans Verkuil authored
Move this out of the soc_camera directory into the atmel directory where it belongs. Signed-off-by:
-
Hans Verkuil authored
This patch converts the atmel-isi driver from a soc-camera driver to a driver that is stand-alone. Signed-off-by:
-
Hans Verkuil authored
The original bindings documentation was incomplete (missing pinctrl-names, missing endpoint node properties) and the example was out of date. Add the missing information and tidy up the text. Signed-off-by:
-
Hans Verkuil authored
Add DT support. Use it to get the reset and pwdn pins (if there are any). Tested with one sensor requiring reset/pwdn and one sensor that doesn't have reset/pwdn pins. Signed-off-by:
-
Hans Verkuil authored
Get the clock for this sensor. Signed-off-by:
-
Hans Verkuil authored
Drop unnecesary memset. Drop the unnecessary extendedmode check and set the V4L2_CAP_TIMEPERFRAME capability. Signed-off-by:
-
