- 27 Jun, 2013 12 commits
-
-
Alex Shi authored
Based-on-patch-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Alex Shi <alex.shi@intel.com> Tested-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1371694737-29336-14-git-send-email-alex.shi@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Alex Shi authored
Since no one use it. Signed-off-by:
Paul Turner <pjt@google.com> Tested-by:
-
Alex Shi authored
Similar to runnable_load_avg, blocked_load_avg variable, long type is enough for removed_load in 64 bit or 32 bit machine. Then we avoid the expensive atomic64 operations on 32 bit machine. Signed-off-by:
-
Alex Shi authored
Since tg->load_avg is smaller than tg->load_weight, we don't need a atomic64_t variable for load_avg in 32 bit machine. The same reason for cfs_rq->tg_load_contrib. The atomic_long_t/unsigned long variable type are more efficient and convenience for them. Signed-off-by:
-
Alex Shi authored
Since the 'u64 runnable_load_avg, blocked_load_avg' in cfs_rq struct are smaller than 'unsigned long' cfs_rq->load.weight. We don't need u64 vaiables to describe them. unsigned long is more efficient and convenience. Signed-off-by:
-
Alex Shi authored
Aside from using runnable load average in background, move_tasks is also the key function in load balance. We need consider the runnable load average in it in order to make it an apple to apple load comparison. Morten had caught a div u64 bug on ARM, thanks! Thanks-to: Morten Rasmussen <morten.rasmussen@arm.com> Signed-off-by:
-
Alex Shi authored
They are the base values in load balance, update them with rq runnable load average, then the load balance will consider runnable load avg naturally. We also try to include the blocked_load_avg as cpu load in balancing, but that cause kbuild performance drop 6% on every Intel machine, and aim7/oltp drop on some of 4 CPU sockets machines. Or only add blocked_load_avg into get_rq_runable_load, hackbench still drop a little on NHM EX. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Alex Shi authored
To get the latest runnable info, we need do this cpuload update after task_tick. Signed-off-by:
-
Alex Shi authored
The woken migrated task will __synchronize_entity_decay(se); in migrate_task_rq_fair, then it needs to set `se->avg.last_runnable_update -= (-se->avg.decay_count) << 20' before update_entity_load_avg, in order to avoid sleep time is updated twice for se.avg.load_avg_contrib in both __syncchronize and update_entity_load_avg. However if the sleeping task is woken up from the same cpu, it miss the last_runnable_update before update_entity_load_avg(se, 0, 1), then the sleep time was used twice in both functions. So we need to remove the double sleep time accounting. Paul also contributed some code comments in this commit. Signed-off-by:
-
Alex Shi authored
We need to initialize the se.avg.{decay_count, load_avg_contrib} for a new forked task. Otherwise random values of above variables cause a mess when a new task is enqueued: enqueue_task_fair enqueue_entity enqueue_entity_load_avg and make fork balancing imbalance due to incorrect load_avg_contrib. Further more, Morten Rasmussen notice some tasks were not launched at once after created. So Paul and Peter suggest giving a start value for new task runnable avg time same as sched_slice(). PeterZ said: > So the 'problem' is that our running avg is a 'floating' average; ie. it > decays with time. Now we have to guess about the future of our newly > spawned task -- something that is nigh impossible seeing these CPU > vendors keep refusing to implement the crystal ball instruction. > > So there's two asymptotic cases we want to deal well with; 1) the case > where the newly spawned program will be 'nearly' idle for its lifetime; > and 2) the case where its cpu-bound. > > Since we have to guess, we'll go for worst case and assume its > cpu-bound; now we don't want to make the avg so heavy adjusting to the > near-idle case takes forever. We want to be able to quickly adjust and > lower our running avg. > > Now we also don't want to make our avg too light, such that it gets > decremented just for the new task not having had a chance to run yet -- > even if when it would run, it would be more cpu-bound than not. > > So what we do is we make the initial avg of the same duration as that we > guess it takes to run each task on the system at least once -- aka > sched_slice(). > > Of course we can defeat this with wakeup/fork bombs, but in the 'normal' > case it should be good enough. Paul also contributed most of the code comments in this commit. Signed-off-by: -
Alex Shi authored
The following 2 variables are only used under CONFIG_SMP, so its better to move their definiation into CONFIG_SMP too. atomic64_t load_avg; atomic_t runnable_avg; Signed-off-by: -
Alex Shi authored
Remove CONFIG_FAIR_GROUP_SCHED that covers the runnable info, then we can use runnable load variables. Also remove 2 CONFIG_FAIR_GROUP_SCHED setting which is not in reverted patch(introduced in 9ee474f5), but also need to revert. Signed-off-by:
-
- 19 Jun, 2013 16 commits
-
-
Joe Perches authored
Just use struct ctl_table. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Viresh Kumar authored
sd can't be NULL in init_sched_groups_power() and so checking it for NULL isn't useful. In case it is required, then also we need to rearrange the code a bit as we already accessed invalid pointer sd to get sg: sg = sd->groups. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Viresh Kumar authored
In build_sched_groups() we don't need to call get_group() for cpus which are already covered in previous iterations. Calling get_group() would mark the group used and eventually leak it since we wouldn't connect it and not find it again to free it. This will happen only in cases where sg->cpumask contained more than one cpu (For any topology level). This patch would free sg's memory for all cpus leaving the group leader as the group isn't marked used now. Signed-off-by:
-
Viresh Kumar authored
In the beginning of build_sched_groups() we called sched_domain_span() and cached its return value in span. Few statements later we are calling it again to get the same pointer. Lets use the cached value instead as it hasn't changed in between. Signed-off-by:
-
Viresh Kumar authored
For loop for traversing sched_domain_topology was used at multiple placed in core.c. This patch removes code redundancy by creating for_each_sd_topology(). Signed-off-by:
-
Viresh Kumar authored
Memory for sd is allocated with kzalloc_node() which will initialize its fields with zero. In build_sched_domain() we are setting sd->child to child even if child is NULL, which isn't required. Lets do it only if child isn't NULL. Signed-off-by:
-
Viresh Kumar authored
alloc_state will be overwritten by __visit_domain_allocation_hell() and so we don't actually need to initialize alloc_state. Signed-off-by:
-
Viresh Kumar authored
We are saving first scheduling domain for a cpu in build_sched_domains() by iterating over the nested sd->child list. We don't actually need to do it this way. tl will be equal to sched_domain_topology for the first iteration and so we can set *per_cpu_ptr(d.sd, i) based on that. So, save pointer to first SD while running the iteration loop over tl's. Signed-off-by:
-
Viresh Kumar authored
build_sched_domain() never uses parameter struct s_data *d and so passing it is useless. Remove it. Signed-off-by:
-
Viresh Kumar authored
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time back and the comments/Documentation never got updated. I figured it out when I was going through sched-domains.txt and so thought of fixing it globally. I haven't crossed check if the stuff that is referenced in sched/core.c by all these files is still present and hasn't changed as that wasn't the motive behind this patch. Signed-off-by:
-
Michael Wang authored
default_cfs_period(), do_sched_cfs_period_timer(), do_sched_cfs_slack_timer() already defined previously, no need to declare again. Signed-off-by:
Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by:
-
Michael Wang authored
Directly use rq to save some code. Signed-off-by:
-
Kirill Tkhai authored
[ Peter, this is based off of some of my work, I ran it though a few tests and it passed. I also reviewed it, and added my SOB as I am somewhat a co-author to it. ] Based on the patch by Steven Rostedt from previous year: https://lkml.org/lkml/2012/4/18/517 1)Simplify pull_rt_task() logic: search in pushable tasks of dest runqueue. The only pullable tasks are the tasks which are pushable in their local rq, and no others. 2)Remove .leaf_rt_rq_list member of struct rt_rq and functions connected with it: nobody uses it since now. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Ingo Molnar authored
Merge in fixes before applying ongoing new work. Signed-off-by: -
Steven Rostedt authored
Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [<ffffffff816b39fd>] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8109d645>] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [<ffffffff816ae383>] dump_stack+0x19/0x1b [<ffffffff810b698d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff8109d7c5>] cpuacct_charge+0x185/0x1f0 [<ffffffff8109d645>] ? cpuacct_charge+0x5/0x1f0 [<ffffffff8108dffc>] update_curr+0xec/0x240 [<ffffffff8108f528>] put_prev_task_fair+0x228/0x480 [<ffffffff816b3a71>] __schedule+0x161/0x9b0 [<ffffffff816b4721>] preempt_schedule+0x51/0x80 [<ffffffff816b4800>] ? __cond_resched_softirq+0x60/0x60 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e [<ffffffff810ff3cc>] ftrace_ops_control_func+0x1dc/0x210 [<ffffffff816be280>] ftrace_call+0x5/0x2f [<ffffffff816b681d>] ? retint_careful+0xb/0x2e [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: -
Vincent Guittot authored
I have faced a sequence where the Idle Load Balance was sometime not triggered for a while on my platform, in the following scenario: CPU 0 and CPU 1 are running tasks and CPU 2 is idle CPU 1 kicks the Idle Load Balance CPU 1 selects CPU 2 as the new Idle Load Balancer CPU 2 sets NOHZ_BALANCE_KICK for CPU 2 CPU 2 sends a reschedule IPI to CPU 2 While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2 CPU 2 finally wakes up, runs task A and discards the Idle Load Balance task A quickly goes back to sleep (before a tick occurs on CPU 2) CPU 2 goes back to idle with NOHZ_BALANCE_KICK set Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be performed. We must wait for the sched softirq to be raised on CPU 2 thanks to another part the kernel to come back to clear NOHZ_BALANCE_KICK. The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if we can't raise the sched_softirq for the Idle Load Balance. Change since V1: - move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB can't run on this CPU (as suggested by Peter) Signed-off-by:
-
- 31 May, 2013 2 commits
-
-
Andrew Jones authored
Commit 316ad248 ("sched/x86: Rewrite set_cpu_sibling_map()") broke the construction of sibling maps, which also broke the booted_cores accounting. Before the rewrite, if smt was present, then each map was updated for each smt sibling. After the rewrite only cpu_sibling_mask gets updated, as the llc and core maps depend on 'has_mc = x86_max_cores > 1' instead. This leads to problems with topologies like the following (qemu -smp sockets=2,cores=1,threads=2) processor : 0 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 1 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 processor : 2 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 3 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 This patch restores the former construction by defining has_mc as (has_smt || x86_max_cores > 1). This should be fine as there were no (has_smt && !has_mc) conditions in the context. Aso rename has_mc to has_mp now that it's not just for cores. Signed-off-by:
Andrew Jones <drjones@redhat.com> Acked-by:
-
Kamalesh Babulal authored
Commit 78becc27 ("sched: Use an accessor to read the rq clock") introduces rq_clock(), which obsoletes the use of the "rq" variable in expire_cfs_rq_runtime() and triggers this build warning: kernel/sched/fair.c: In function 'expire_cfs_rq_runtime': kernel/sched/fair.c:2159:13: warning: unused variable 'rq' [-Wunused-variable] Signed-off-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
-
- 30 May, 2013 5 commits
-
-
Linus Torvalds authored
Merge mn10300 fixes from David Howells. * emailed patches from David Howells <dhowells@redhat.com>: MN10300: Need pci_iomap() and __pci_ioport_map() defining MN10300: ASB2305's PCI code needs the definition of XIRQ1 MN10300: Enable IRQs more in system call exit work path MN10300: Fix ret_from_kernel_thread
-
David Howells authored
Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Ken Cox <jkc@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by:
-
David Howells authored
Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: -
David Howells authored
ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87 ("mn10300: switch to saner kernel_execve() semantics") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
- 29 May, 2013 3 commits
-
-
Linus Torvalds authored
Merge tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin-control fixes from Linus Walleij: - Six patches fixing up the suspend/resume and wakeup handling of the Samsung and Exynos drivers. - Errorpath fixes for four different drivers. All on the probe() errorpath. - Make the debugfs code for pin config take the right mutex. * tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinconf: take the right mutex pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() pinctrl: exynos: Handle suspend/resume of GPIO EINT registers pinctrl: samsung: Allow per-bank SoC-specific private data pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks pinctrl: Don't override the error code in probe error handling ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs pinctrl: samsung: fix suspend/resume functionality
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM Exynos fixes from Olof Johansson: "Here's a shorter set of fixes for 3.10, all for Samsung Exynos platforms. It also includes a defconfig update so that exynos_defconfig provides a meaningful set of drivers to boot an unmodified kernel on the Samsung ARM-based Chromebooks." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: defconfig update ARM: SAMSUNG: Add names to fimd0 IRQ resources ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC ARM: dts: Enabling samsung-usb2phy driver for exynos5250
-
Olof Johansson authored
This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Doug Anderson <dianders@chromium.org> Tested-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Kukjin Kim <kgene.kim@samsung.com>
-
- 28 May, 2013 2 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is mostly exynos and intel fixes, along with some vblank patches I lost from Rob a few months ago that make wayland work better on lots of GPUs, also a qxl kconfig fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) qxl: fix Kconfig deps - select FB_DEFERRED_IO drm/exynos: replace request_threaded_irq with devm function drm/exynos: remove unnecessary devm_kfree drm/exynos: fix build warnings from ipp fimc drm/exynos: cleanup device pointer usages drm/exynos: wait for the completion of pending page flip drm/exynos: use drm_send_vblank_event() helper drm/i915: avoid premature DP AUX timeouts drm/i915: avoid premature timeouts in __wait_seqno() drm/i915: use msecs_to_jiffies_timeout instead of open coding the same drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration drm/i915: force full modeset if the connector is in DPMS OFF mode drm/exynos: page flip fixes drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL drm/imx: use drm_send_vblank_event() helper drm/shmob: use drm_send_vblank_event() helper drm/radeon: use drm_send_vblank_event() helper drm/nouveau: use drm_send_vblank_event() helper ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes a crash in the new sha256_ssse3 driver as well as a DMA setup/teardown bug in caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations crypto: caam - fix inconsistent assoc dma mapping direction
-
